Sending Audio to Mic of BT-enabled Cellphone

Hello everyone!!!
I've been searching the forums to find something related to what I'd like to do, and I'm not sure if I've discovered that its' completely impossible (or not), so I decided to post a thread & see what everyone else's thoughts are... (so here goes):
I'm searching for a way to send Audio to the Microphone of a BT-enabled Cellphone - something like the "elevator-music" we hear when we're put on-hold.
I know that the developers of the program BluePhoneElite plan to implement a feature that allows you to use the Speakers/Microphone of a Mac during a voice-call, and I'm hoping that if I cannot find another solution - that I could simply write an applescript to interact with the Microphone.
So please, if you would, post any ideas/thoughts/suggestions you have - as I'll be updating this thread as I discover whether this can be done or not.
-Thanx!!!
mxeDiT10n

No, this is not possible with Mac OS X, yet, because the Headset Bluetooth profile is missing for this direction. The Mac cannot act as Bluetooth headset.

Similar Messages

With Airplay, is it possible to send audio, when mirroring, to Airplay-enabled speakers?

When mirroring an iMac onto a TV using Airplay via Apple TV, is it possible to send the audio to Airplay enabled speakers instead of using the TV's speakers? This potentially means that one could have surround sound whilst mirroring the screen onto the TV.
Thanks for any help in advance!

If the speakers are airplay enabled then you can just set the audio output via the Apple TV settings

I'm having trouble sending audio messages.

I have an iPhone 5 model and I can't seem to send audio messages, how do I enable the microphone? Do I have to upgrade to the iPhone 5S to use this new feature? I have iOS 8 installed but can't seem to figure it out. I get the send button instead of the microphone.

We have both done the reset and still nothing but not the iTunes bit
Will everything get removed from my phone ? Iv backed it up so I'm assuming I won't lose all my fings ?
Iv never had any trouble with my iPhone nor as he until this and it's only our phones to each other we can still revive iMessages and normal SMS from everyone eles it's very strange
Thank you for your help

Record audio through Mic on web site and send it to other place

Hi There,
I 'd like to record audio through mic using Flash on a web
site and send the audio clip to other people or to the server. Is
it possible without FMS?
Thanks!
Nick

No, without FMS you can't save the audio from a mic.

How to use audio and mic with multipoint server with out it crashing on you

how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
them to work at the same time and if posible can i use a non USB device

Look for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
Claude

A/V Transmission: Can't send Audio

Hello everybody,
I've got a client-server application that first sends video and audio to a server. After that the server sends the incoming streams to a receiver-client.
Sending audio and video to server works fine - the server gets both video and audio, but only sends out the video stream (I can see that with using windump).
So here is what I'm doing in detail (have a look here: diagram ):
(1) Grab the video and audio DataSource (Webcam and Mic).
(2) After that I'm creating a mergedDataSource in order to (3) create a ProcessorModel (I don't want the sender client to install JMF, so I'm using FMJ - there might be different ways to prepare the DataSources for RTP streaming in FMJ, but this one works). For transmission I have two RTPManagers (for that I wrote a special class, that administrates those two managers - nothing special): first one sends video, second one sends audio to the server. They're initialized with port (video) and port+2 (audio), so there shouldn't be any port problems.
I invoke methods for sending on each manager, both get the same DataSource. Have a look:
      * audio transmission
          public void sendVideoStreamToReceiver(DataSource newStream) {
          SendStream outStream=null;
          try {
               System.out.println("Videosenden");
               outStream = this.videoMgr.createSendStream(newStream,0);
               outStream.start();
          } catch (Exception e) {
               e.printStackTrace();
      * audio transmission
     public void sendAudioStreamToReceiver(DataSource newStream) {
          SendStream outStream=null;
          try {
               System.out.println("Audio senden");
               outStream = this.audioMgr.createSendStream(newStream,1);
               outStream.start();
          } catch (Exception e) {
               e.printStackTrace();
     } In both ways I'm creating a SendStream out of the same DataSource, but on different channels (should have two channels at that point).
after that I start the processor:
sendMgrs = new ManagerPair(port);
          sendMgrs.addReceiveParticipant(serverAddress,port);
          sendMgrs.sendVideoStreamToReceiver(dsVideoOutput);
          sendMgrs.sendAudioStreamToReceiver(dsAudioOutput);
          processor.start();(4) The server has two RTPManagers for receiving audio and video and two more for sending audio and video. So I get two NewReceiveStreamEvents.
I keep both incoming streams in seperate DataSources this time and send them nearly the same way I did on sender client side - the only difference is that I invoke the sendVideoStreamToReceiver/sendAudioStreamToReceiver not with a mergedDataSource as parameter but with single DataSources.
Because of that I create the SendStreams with channel 0 both times (5). After that the transmission of should begin, but with using windump I can see, that only video is sent further.
So my questions are:
1) Does the channel-thing work the way I thing it works?
2) Why is only one of the incoming streams sent out by the server?
Thanks in advance,
Chris
Edited by: VladimrN on Apr 14, 2010 5:21 AM
Edited by: VladimrN on Apr 14, 2010 5:23 AM
Edited by: VladimrN on Apr 14, 2010 5:24 AM

I have no idea what you're talking about, channels... but the number you're passing into your createSendStream should be non-zero in every case you just described...
If the index is set to zero, it would indicate a RTP
mixer operation is desired. i.e. all the streams of this
data source must be mixed into one single stream from one single
SSRC. So your streamIndex should be 1 and then 2, not 0 and then 1. In both cases.

MacBook 2007 black 13" would a mini-DVI to HDMI cable send audio to the TV?

I attached my macbook (2007 black 13") to my TV with a mini-DVI to VGA; would a mini-DVI to HDMI cable allow my audio to play through the TV? Wanted to ask before I purchased it. Thanks.

No. The black MacBooks don't send audio through HDMI, so you'd need to connect the audio separately.

A black airplay info window floats around on my HDTV screen when sending audio content via airplay up to sound system w Apple TV. How can I get rid of this?

A black airplay info window floats around on my HDTV screen when sending audio content via airplay up to sound system w Apple TV. How can I get rid of this?

Had this happen to me after a recent update, was super annoying. To turn off, go to Settings > AirPlay > Conference Room Display > Off.

How can I send audio from an application to the HDMI port on my Mac Mini while also sending the audio to another application?

I am trying to use VLC (or any streaming audio player) and listen to a web radio station while at the same time using Audacity to monitor the CODEC's digital level. I want to make a digital measurement of the level that the streaming radio station is using on the air. I can calibrate the levels for maxbit by overdriving my web stations encoder and watching for clipping distortion on the decode on Audacity (waveform view). I then calibrate the clipped value to the 0dB peak on Audacity's meters or waveform view. I also am trying to calibrate and use the free Orban Loudness meter. I require something like Soundflower (as others have indicated) but I find that sound flower is very unstable (or maybe mis-configured on my machine with Lion). I think there is a clock drift issue since Soundflower works well for some number of minutes and then distortion appears in one of the outputs (either the HDMI or the feed to Audacity/Orban Loudness Meter). I would have thought this was easy on a Mac, but as it turns out it is not. Am I missing something here and there is a way to send audio from one application to my HDMI output and another application?

Thanks Rudegar for the response. I was already afraid that Apple TV won't be of any help.
Is there no solution for getting an audio-stream into the "airplay-system", e.g. by using another apple device?

How to send audio files as attachments?There is no attachment option in mail and no share option in MUSIC

How to send audio files as attachments?There is no attachment option in mail and no share option in MUSIC

i have some voice samples in Music file .how to share those files? or plz tel me where to store the voice samples

Sending Audio to Browser - Performance issue

Hi,
I have written a simple jsp page that retrieves an OrdAudio object from the database and sends it to the browser. I have done this before with images, which worked perfectly. For the audio files, I simply changed the image specific code to work with audio.
The problem is that for an approximately 100KB audio file, it takes a good two minutes for it to play in the browser. Over a broadband connection this seems pretty slow. Is there a way to improve this?
here is part of my code:
// create OrdAudio instance
OrdAudio media = (OrdAudio)result.getCustomDatum(1, OrdAudio.getFactory());
// set page context and send audio to browser
handler.setPageContext(pageContext);
handler.sendAudio(media);

This doesn't sound right. One thing that caught me eye is that you are measuring the time that the audio "plays in the browser." Is there any chance that this 100kb file has a 100sec audio duration? How long should it take to play this audio file?
One way to debug is to change the mid-tier logic to save the file to the local disk instead of sending it back on the HTTP response. You can use the method getDataInFile(java.lang.String filename) where filename is a string representing the full path to a local fiel that you have permission to write to. If you time this call, you can measure how long it takes to fetch the data from the database.
The other issue concerns the client side HTML coding. What are you coding to accept the audio data? Browsers accept images (JPEG and GIF) natively but plugins are required to accept audio data. How is this being handled?

Audio interface problem with Waveburner...wil not send audio to MoTU 828mk3

When using Waveburner with a new MOTU 828Mk3 interface. the audio refuses to play via the 828 despite it being selected in the Audio Device window. It defaults to sending audio to my second display screen. Is there a re-set somewhere? It works fine with Logic9.

Hi,
You need to select the MOtu 828mk3 as your default audio device under the Mac Os "Audio Midi Setup" application, and the "sound" preference pane in Preferences.
Cheers

Can't send audio messages from Nokia E63 to email ...

I used to send audio messages from my mobile to my friend's email, and it worked fine.
But some days ago it stopped working. I keep on seeing this whenever I try to send audio message.
"In order to send/download MM messages, the current active connection may be closed (this may affect other applications in use). Do you want to continue ?"
When I disconnected connection, it fails to send again. I saw this message:
"Multimedia message cannot be sent. Packet data connection not available"
It is impossible for me to send the audio message if I close the connection because I'm not having internet in my phone.
I have been using packet data connection to send all the messages to email all the time and it went OK. I got that problem just a few days ago and I cannot send any audio messages now.
I can still send normal emails (non-audio message) from my phone through packet data connection though.
The problem is only when sending the audio message.
I'm using Nokia E63 and I'm in the UAE.
My mobile provider is "Du".
I use packet data connection from "MyWorld"
I don't have any other packet data connections. I had many but now, MyWorld is the only one in my phone.
Please help me how can I do it.

Automatic configuration.
Your mobile will be automatically configured to access the MyWorld mobile portal when you first join du.
You will receive an SMS message, which you should accept and save.
You can also request for these settings by sending the following SMS message “du” to 333 or by calling Customer Care on 155.
Availability of the MyWorld mobile portal and of the relevant settings is dependent on your handset type.
For more information on MyWorld, call 155 from your mobile or visit us at www.du.ae
This might do the trick.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Itouch not sending audio to car speakers

I recently added an AUX cable to my Alpine car stereo, but my ipod touch will not send audio to the car speakers. When its plugged in to the cable it just plays through the built in speaker on the ipod. The cable is the older 12v type, so I understand it will not charge the ipod, but I would expect it to send the audio signal??? I also tried a older 30Gb ipod video model and it plays just fine, so I doubt its a bad cable. I was going to buy the 12v to 5v converter to support charging for the ipod touch, but I am not sure that will fix the audio problem...
Any feedback would be appreciated!!!

Sometimes the manufacturer of cables are not uptodate with the many iPod models.
You have to check different supplier.
I have a Skoda Octavia with a Radio Navigation system which is the exact copy of VW or Audi.
The iPhone cable of Skoda did not worked with the iPhone 4 and I am using an Audi cable.
Nobody at Skoda/Audi have a serious explanation.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

Sending Audio to Mic of BT-enabled Cellphone

Similar Messages

Maybe you are looking for