Sending Confidential information throw SAP PI
Hi experts,
I would like to send confidential information throw PI 7.1. I don't want it to be available in PI monitoring. Is there any way of achieving that without encoding it from the source?
Regards
Gonzalo
OK, I didn't knew/thought about that possibility.
Thanks
G
Similar Messages
-
Need to sync Notes and Reminders Without iCloud to maintain confidential information
Does anyone have a way to sync Notes & Reminders WITHOUT using iCloud? Directly through USB cable or my home network would be good. Can't Apple understand that users may not want to send confidential information into the Cloud???
With a backup maintained for your iTunes library along with all other important data stored on an external hard drive or some other external media used for backup purposes only, losing all iTunes content on your iPhone with the first sync with iTunes on another computer would be avoided.
http://support.apple.com/kb/HT1751
iTunes includes an option to transfer iTunes content that was purchased/downloaded from the iTunes store from an iPod or iPhone but this is for iTunes content that was purchased/downloaded from the iTunes store only including paid and free apps. First you need to authorize the computer with your iTunes account with iTunes. With your iPhone connected and without syncing, the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone. -
Using RDI Interface to send print data to SAP PI
Hi,
I have never used the SAPScript Raw Data Interface, but I now have the task to send printing information to SAP PI and
from there to a print service.
I see, that I could send the printing documents as IDoc, but is it also possible to call for example a function/program, where I could process the print data and then send it to PI?
Each different print document needs to have it's own sapscript form to derive the necessary fields of content, right?
Has anyone an idea, what I could do? Can anyone give me an overview about the possibilities of the RDI interface?
Thank you very much!
MichaelPlease check the element "Dealer_code" in your SAP system . Is it a data element or a field? i dont think that is defined in your system.
-
System preferences wants to use confidential information stored in my keychain
Images are not being displayed in emails on my Mac. This includes sending photos from iphoto via email. When going in to System Preferences to see what I need to check, I get the window which reads "System Preferences wants to use your confidential information stored in "imap.aol.com" in your keychain. Should I "always allow", "deny" or "allow"?
I recently synched my contacts via icloud with my mac and my iphone (which created a whole different problem). That is the only thing I can think of that I have done recently (?). Speaking of the contacts issue, now my phone does not have the phone numbers and all of the information of my contacts as I had on my phone before the icloud synch. Now, the contacts in my phone seem to be mostly email addresses that were stored on my mac and no phone numbers!!! WT? Help. My love for Apple is waning.I too am losing confidence in Apple. I want to be able to make these choices and still have access to my apps.
-
Flow of tables information between sap and java
How should i pass the table information from sap to java.
and how to process the data of a table in the java program. i had seen the examples of JCO. BUT I IS VERY CONFUSING (BCOZ I DON'T KNOW JAVA).
PLZ IF U DON'T MIND SEND ME CODE SNIPPET TO
1.GET THE TABLE INTO THE JAVA PROGRAM
2.PROCESSING THE TABLE INFORMATION IN JAVA PROGRAM
3.MODIFYING THE TABLE INFORMATION IN JAVA PROGRAM
4.SENDING BACK THE TABLE TO SAP FROM JAVA PROGRAMhi,Kondani
as JCO offers both Client side and server Side programming.
you can use JCO to connect SAP ABAP.outbound and inbound.
1) JCO example 5 is about Server side programming java code. And you can see the data mapping is this example.And you must use sm59 to define the connections in SAP before you start.
2) example 1 is about client side programming.
try example 1 first. you can get a table from SAP using BAPI.
Lots of JCO weblog you can see here
https://www.sdn.sap.com/sdn/search.sdn?contenttype=url&query=jco&selected=9&content=/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fSDN!2fiViews!2fWCM!2fcom.sap.sdn..wcm.search.search_adv%3Fprttheme%3DCSIN%26QueryString=jco%26SearchPluginName=sdn_weblog%26SelectedCustomProps=resourcetype(value=sdn_weblog)
Regards -
Hi all,
I am using the following code to send the mail to SAP inbox,
DATA : it_reclist TYPE TABLE OF somlreci1,
wa_reclist TYPE somlreci1.
DATA : wa_docdata TYPE sodocchgi1.
DATA : it_message TYPE TABLE OF solisti1,
wa_message TYPE solisti1,
it_attach TYPE TABLE OF sopcklsti1.
LOOP AT it_super_uid INTO wa_super_uid.
wa_reclist-receiver = wa_super_uid-usid.
wa_reclist-rec_type = 'B'.
APPEND wa_reclist TO it_reclist.
ENDLOOP.
wa_docdata-obj_langu = sy-langu.
wa_docdata-obj_name = text-005.
wa_docdata-obj_descr = text-006.
wa_docdata-sensitivty = 'F'.
wa_message-line = text-007.
APPEND wa_message TO it_message.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_docdata
put_in_outbox = 'X'
COMMIT_WORK = ' '
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = it_attach
OBJECT_HEADER =
CONTENTS_BIN =
CONTENTS_TXT =
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
receivers = it_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc = 0.
MESSAGE text-008 TYPE 'S'.
ENDIF.
Still i am not able to send the mail , its giving me exception 5. Please let me know how could i modify the code.
Thanx,
Girish.HI,
The code below demonstrates how to send an SAP mail to a users inbox (SBWP)
: Report ZSAPTALK :
: Author SAPdev.co.uk :
: Description : :
: Send mail message to SAP mail inbox. :
: Please visit www.sapdev.co.uk for further info :
REPORT ZSAPMAIL NO STANDARD PAGE HEADING.
TABLES: DRAD,
QINF,
DRAW,
SOUC,
SOFD,
DRAP.
DATA: P_RETURN_CODE LIKE SY-SUBRC.
data: d_username LIKE DRAP-PRNAM.
mail declarations
DATA : BEGIN OF NEW_OBJECT_ID. " the newly created email object
INCLUDE STRUCTURE SOODK.
DATA : END OF NEW_OBJECT_ID.
DATA : BEGIN OF FOLDER_ID. " the folder id of the outbox
INCLUDE STRUCTURE SOODK.
DATA : END OF FOLDER_ID.
DATA : BEGIN OF REC_TAB OCCURS 5. " the table which will contain the
INCLUDE STRUCTURE SOOS1. " information on the destination
DATA : END OF REC_TAB.
DATA : BEGIN OF OBJECT_HD_CHANGE. " the table which contains the
INCLUDE STRUCTURE SOOD1. " info for the object we will be
DATA : END OF OBJECT_HD_CHANGE. " creating
DATA : OBJECT_TYPE LIKE SOOD-OBJTP. " the type of object
DATA : BEGIN OF OBJHEAD OCCURS 5. " the header of the object
INCLUDE STRUCTURE SOLI.
DATA : END OF OBJHEAD.
DATA : BEGIN OF OBJCONT OCCURS 0. " the contents of the object
INCLUDE STRUCTURE SOLI. " i.e. the text etc
DATA : END OF OBJCONT.
DATA : BEGIN OF OBJPARA OCCURS 5. " formatting options
INCLUDE STRUCTURE SELC.
DATA : END OF OBJPARA.
DATA : BEGIN OF OBJPARB OCCURS 5. " formatting options
INCLUDE STRUCTURE SOOP1.
DATA : END OF OBJPARB.
DATA : BEGIN OF T_MAIL_TEXT OCCURS 0, "Message table for messages to
STRING(255), "user via mailbox
END OF T_MAIL_TEXT.
Parameter: p_uname like sy-uname.
**START-OF-SELECTION
START-OF-SELECTION.
d_username = p_uname.
PERFORM POPULATE_EMAIL_TEXT.
PERFORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
PERFORM CREATE_AND_SEND_MAIL_OBJECT.
FORM POPULATE_EMAIL_TEXT *
Inserts text for email message *
FORM POPULATE_EMAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING. "puts a blank line in
APPEND T_MAIL_TEXT.
APPEND T_MAIL_TEXT.
adds failed list on to end of success list.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING. "puts a blank line in
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Header1 Header2 Header3'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = '----
APPEND T_MAIL_TEXT.
ENDFORM.
*& Form SETUP_TRX_&_RTX_MAILBOXES
Ensure that the mailboxes of the sender (INTMGR) are set up OK
FORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
get the user no of the sender in order to add the mail to the
user name's outbox for future reference
SELECT SINGLE * FROM SOUC
WHERE SAPNAM = SY-UNAME. "SAP name of a SAPoffice user
IF SY-SUBRC NE 0.
"Error finding the SAPoffice user info for the user
MESSAGE E064(ZR53) WITH SY-UNAME.
P_RETURN_CODE = 1.
EXIT.
ENDIF.
*Get the outbox No for the sender from the user No where the folder
" type is an outbox
SELECT * FROM SOFD WHERE OWNTP = SOUC-USRTP "Owner type from ID
AND OWNYR = SOUC-USRYR "Owner year from the ID
AND OWNNO = SOUC-USRNO "Owner number from the I
AND FOLRG = 'O'."Output box
ENDSELECT.
IF SY-SUBRC NE 0.
" Error getting folder information for the user
MESSAGE E065(ZR53) WITH SY-UNAME.
P_RETURN_CODE = 1.
EXIT.
ENDIF.
ENDFORM. " SETUP_TRX_&_RTX_MAILBOXES
*& Form CREATE_AND_SEND_MAIL_OBJECT
FORM CREATE_AND_SEND_MAIL_OBJECT.
FOLDER_ID-OBJTP = SOFD-FOLTP. " the folder type ( usually FOL )
FOLDER_ID-OBJYR = SOFD-FOLYR. " the folder year ( usually 22 )
FOLDER_ID-OBJNO = SOFD-FOLNO. " the folder no.
OBJECT_TYPE = 'RAW'. " the type of object being added
build up the object information for creating the object
OBJECT_HD_CHANGE-OBJLA = SY-LANGU. " the language of the email
OBJECT_HD_CHANGE-OBJNAM = 'PS to DM Interface'. " the object name
mail subject 'Mass Linking of QA, pass/fail'
MOVE TEXT-002 TO OBJECT_HD_CHANGE-OBJDES.
OBJECT_HD_CHANGE-DLDAT = SY-DATUM. " the date of the email
OBJECT_HD_CHANGE-DLTIM = SY-UZEIT. " the time of the email
OBJECT_HD_CHANGE-OBJPRI = '1'. " the priority ( highest )
OBJECT_HD_CHANGE-OBJSNS = 'F'. " the object sensitivity
F is functional, C - company sensitive
object_hd_change-skips = ' '. " Skip first screen
object_hd_change-acnam = 'SM35'. " Batch imput transaction
object_hd_change-vmtyp = 'T'. " Transaction type
add the text lines into the contents of the email
CLEAR OBJCONT.
REFRESH OBJCONT.
free objcont. " added this to delete the mail contents records
LOOP AT T_MAIL_TEXT.
OBJCONT-LINE = T_MAIL_TEXT-STRING.
APPEND OBJCONT.
ENDLOOP.
CLEAR OBJCONT.
build up the table of receivers for the email
REC_TAB-RCDAT = SY-DATUM. " the date to send the email
REC_TAB-RCTIM = SY-UZEIT. " the time to send the email
the SAP username of the person who will receive the email
REC_TAB-RECNAM = D_USERNAME.
the user type of the person who will send the email ( USR )
REC_TAB-SNDTP = SOUC-USRTP.
the user year of the person who will send the email ( 22 )
REC_TAB-SNDYR = SOUC-USRYR.
the user number of the person who will send the email
REC_TAB-SNDNO = SOUC-USRNO.
the sap username of the person who will send the email
REC_TAB-SNDNAM = SY-UNAME.
get the user info for the receiver of the document
SELECT SINGLE * FROM SOUC WHERE SAPNAM = D_USERNAME.
IF SY-SUBRC NE 0.
WRITE : / TEXT-001, D_USERNAME. "usnam.
EXIT.
ENDIF.
the user number of the person who will receive the email ( USR )
REC_TAB-RECNO = SOUC-USRNO.
the user type of the person who will receive the email ( USR )
REC_TAB-RECTP = SOUC-USRTP.
the user year of the person who will receive the email ( USR )
REC_TAB-RECYR = SOUC-USRYR.
the priority of the email ( highest )
REC_TAB-SNDPRI = '1'.
check for delivery on the email
REC_TAB-DELIVER = 'X'.
send express so recipient knows there is a problem
REC_TAB-SNDEX = 'X'.
check for a return receipt
REC_TAB-READ = 'X'.
the sap username of the person receiving the email
REC_TAB-ADR_NAME = D_USERNAME. "usnam.
add this receiver to the internal table
APPEND REC_TAB.
CLEAR REC_TAB.
call the function to create the object in the outbox of the sender
CALL FUNCTION 'SO_OBJECT_INSERT'
EXPORTING
FOLDER_ID = FOLDER_ID
OBJECT_HD_CHANGE = OBJECT_HD_CHANGE
OBJECT_TYPE = OBJECT_TYPE
OWNER = SY-UNAME
IMPORTING
OBJECT_ID = NEW_OBJECT_ID
TABLES
OBJCONT = OBJCONT
OBJHEAD = OBJHEAD
OBJPARA = OBJPARA
OBJPARB = OBJPARB
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
DL_NAME_EXIST = 4
FOLDER_NOT_EXIST = 5
FOLDER_NO_AUTHORIZATION = 6
OBJECT_TYPE_NOT_EXIST = 7
OPERATION_NO_AUTHORIZATION = 8
OWNER_NOT_EXIST = 9
PARAMETER_ERROR = 10
SUBSTITUTE_NOT_ACTIVE = 11
SUBSTITUTE_NOT_DEFINED = 12
SYSTEM_FAILURE = 13
X_ERROR = 14
OTHERS = 15.
IF SY-SUBRC NE 0.
MESSAGE A063(ZR53) WITH SY-SUBRC.
EXIT.
ENDIF.
call the function to send the already created email to the receivers
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
FOLDER_ID = FOLDER_ID
OBJECT_ID = NEW_OBJECT_ID
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
TABLES
RECEIVERS = REC_TAB
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
FOLDER_NOT_EXIST = 4
FOLDER_NO_AUTHORIZATION = 5
FORWARDER_NOT_EXIST = 6
NOTE_NOT_EXIST = 7
OBJECT_NOT_EXIST = 8
OBJECT_NOT_SENT = 9
OBJECT_NO_AUTHORIZATION = 10
OBJECT_TYPE_NOT_EXIST = 11
OPERATION_NO_AUTHORIZATION = 12
OWNER_NOT_EXIST = 13
PARAMETER_ERROR = 14
SUBSTITUTE_NOT_ACTIVE = 15
SUBSTITUTE_NOT_DEFINED = 16
SYSTEM_FAILURE = 17
TOO_MUCH_RECEIVERS = 18
USER_NOT_EXIST = 19
X_ERROR = 20
OTHERS = 21.
IF SY-SUBRC EQ 0.
MESSAGE I035(ZR53) WITH NEW_OBJECT_ID D_USERNAME. "usnam.
ELSE.
MESSAGE I036(ZR53) WITH D_USERNAME." sy-subrc.
ENDIF.
ENDFORM. " CREATE_AND_SEND_MAIL_OBJECT
Hope this helps.
Reward if helpful.
Regards,
Sipra -
SAP WCF - Getting incorrect action when trying to send a RFC to SAP
SAP WCF - Getting incorrect action when trying to send a RFC to SAP
I am trying to send a rfc and i am getting this message below.
Does anyone know the correct action i need to use?
Event Type: Warning
Event Source: BizTalk Server 2006
Event Category: BizTalk Server 2006
Event ID: 5743
Date: 7/6/2009
Time: 3:02:26 PM
User: N/A
Computer: saptestbox
Description:
The adapter failed to transmit message going to send port "WcfSendPort_SAPBinding_Rfc_Custom" with URL "sap://CLIENT=200;LANG=EN;@a/saptest/90?ListenerGwServ=sapgw90&ListenerGwHost=saptest&ListenerProgramId=testE1D200&RfcSdkTrace=False&AbapDebug=False". It will be retransmitted after the retry interval specified for this Send Port. Details:"Microsoft.ServiceModel.Channels.Common.UnsupportedOperationException: Incorrect Action <BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Operation Name="_x002F_SIE_x002F_E_MM_INVENTORY_INTF" Action="http://Microsoft.LobServices.Sap/2007/03/Rfc/_x002F_SIE_x002F_E_MM_INVENTORY_INTF" />
</BtsActionMapping>. Correct the specified Action, or refer to the documentation on the allowed formats for the Actions.
Server stack trace:
at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)".
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.I am getting same error even after using the same operation name in logical and in action on physical port as in Binding file created by adapter
Details:"Microsoft.ServiceModel.Channels.Common.UnsupportedOperationException: Incorrect Action <BtsActionMapping>
<Operation Name="Send" Action="http://Microsoft.LobServices.Sap/2007/03/Idoc/3/ORDERS05//711/Send"/>
</BtsActionMapping>. Correct the specified Action, or refer to the documentation on the allowed formats for the Actions. Note that Actions are case-sensitive. -
How to send a mail from SAP 3.1H Ver.
Hi,
I am working on SAP 3.1H Version. I need to send mail from one of my ABAP program. Since SAP 3.1H version does not have Standard function modules which send mails from any ABAP program so how can I achive this task in this version of SAP.
The Operating system of my application server is Sun solaris.
Waiting for an early and postive reply.
Thanks & Regards,
Maqsood KhanREPORT ZSAPMAIL NO STANDARD PAGE HEADING.
TABLES: DRAD,
QINF,
DRAW,
SOUC,
SOFD,
DRAP.
DATA: P_RETURN_CODE LIKE SY-SUBRC.
data: d_username LIKE DRAP-PRNAM.
mail declarations
DATA : BEGIN OF NEW_OBJECT_ID. " the newly created email object
INCLUDE STRUCTURE SOODK.
DATA : END OF NEW_OBJECT_ID.
DATA : BEGIN OF FOLDER_ID. " the folder id of the outbox
INCLUDE STRUCTURE SOODK.
DATA : END OF FOLDER_ID.
DATA : BEGIN OF REC_TAB OCCURS 5. " the table which will contain the
INCLUDE STRUCTURE SOOS1. " information on the destination
DATA : END OF REC_TAB.
DATA : BEGIN OF OBJECT_HD_CHANGE. " the table which contains the
INCLUDE STRUCTURE SOOD1. " info for the object we will be
DATA : END OF OBJECT_HD_CHANGE. " creating
DATA : OBJECT_TYPE LIKE SOOD-OBJTP. " the type of object
DATA : BEGIN OF OBJHEAD OCCURS 5. " the header of the object
INCLUDE STRUCTURE SOLI.
DATA : END OF OBJHEAD.
DATA : BEGIN OF OBJCONT OCCURS 0. " the contents of the object
INCLUDE STRUCTURE SOLI. " i.e. the text etc
DATA : END OF OBJCONT.
DATA : BEGIN OF OBJPARA OCCURS 5. " formatting options
INCLUDE STRUCTURE SELC.
DATA : END OF OBJPARA.
DATA : BEGIN OF OBJPARB OCCURS 5. " formatting options
INCLUDE STRUCTURE SOOP1.
DATA : END OF OBJPARB.
DATA : BEGIN OF T_MAIL_TEXT OCCURS 0, "Message table for messages to
STRING(255), "user via mailbox
END OF T_MAIL_TEXT.
Parameter: p_uname like sy-uname.
**START-OF-SELECTION
START-OF-SELECTION.
d_username = p_uname.
PERFORM POPULATE_EMAIL_TEXT.
PERFORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
PERFORM CREATE_AND_SEND_MAIL_OBJECT.
FORM POPULATE_EMAIL_TEXT *
Inserts text for email message *
FORM POPULATE_EMAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING. "puts a blank line in
APPEND T_MAIL_TEXT.
APPEND T_MAIL_TEXT.
adds failed list on to end of success list.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING. "puts a blank line in
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Header1 Header2 Header3'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = '----
APPEND T_MAIL_TEXT.
ENDFORM.
*& Form SETUP_TRX_&_RTX_MAILBOXES
Ensure that the mailboxes of the sender (INTMGR) are set up OK
FORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
get the user no of the sender in order to add the mail to the
user name's outbox for future reference
SELECT SINGLE * FROM SOUC
WHERE SAPNAM = SY-UNAME. "SAP name of a SAPoffice user
IF SY-SUBRC NE 0.
"Error finding the SAPoffice user info for the user
MESSAGE E064(ZR53) WITH SY-UNAME.
P_RETURN_CODE = 1.
EXIT.
ENDIF.
*Get the outbox No for the sender from the user No where the folder
" type is an outbox
SELECT * FROM SOFD WHERE OWNTP = SOUC-USRTP "Owner type from ID
AND OWNYR = SOUC-USRYR "Owner year from the ID
AND OWNNO = SOUC-USRNO "Owner number from the I
AND FOLRG = 'O'."Output box
ENDSELECT.
IF SY-SUBRC NE 0.
" Error getting folder information for the user
MESSAGE E065(ZR53) WITH SY-UNAME.
P_RETURN_CODE = 1.
EXIT.
ENDIF.
ENDFORM. " SETUP_TRX_&_RTX_MAILBOXES
*& Form CREATE_AND_SEND_MAIL_OBJECT
FORM CREATE_AND_SEND_MAIL_OBJECT.
FOLDER_ID-OBJTP = SOFD-FOLTP. " the folder type ( usually FOL )
FOLDER_ID-OBJYR = SOFD-FOLYR. " the folder year ( usually 22 )
FOLDER_ID-OBJNO = SOFD-FOLNO. " the folder no.
OBJECT_TYPE = 'RAW'. " the type of object being added
build up the object information for creating the object
OBJECT_HD_CHANGE-OBJLA = SY-LANGU. " the language of the email
OBJECT_HD_CHANGE-OBJNAM = 'PS to DM Interface'. " the object name
mail subject 'Mass Linking of QA, pass/fail'
MOVE TEXT-002 TO OBJECT_HD_CHANGE-OBJDES.
OBJECT_HD_CHANGE-DLDAT = SY-DATUM. " the date of the email
OBJECT_HD_CHANGE-DLTIM = SY-UZEIT. " the time of the email
OBJECT_HD_CHANGE-OBJPRI = '1'. " the priority ( highest )
OBJECT_HD_CHANGE-OBJSNS = 'F'. " the object sensitivity
F is functional, C - company sensitive
object_hd_change-skips = ' '. " Skip first screen
object_hd_change-acnam = 'SM35'. " Batch imput transaction
object_hd_change-vmtyp = 'T'. " Transaction type
add the text lines into the contents of the email
CLEAR OBJCONT.
REFRESH OBJCONT.
free objcont. " added this to delete the mail contents records
LOOP AT T_MAIL_TEXT.
OBJCONT-LINE = T_MAIL_TEXT-STRING.
APPEND OBJCONT.
ENDLOOP.
CLEAR OBJCONT.
build up the table of receivers for the email
REC_TAB-RCDAT = SY-DATUM. " the date to send the email
REC_TAB-RCTIM = SY-UZEIT. " the time to send the email
the SAP username of the person who will receive the email
REC_TAB-RECNAM = D_USERNAME.
the user type of the person who will send the email ( USR )
REC_TAB-SNDTP = SOUC-USRTP.
the user year of the person who will send the email ( 22 )
REC_TAB-SNDYR = SOUC-USRYR.
the user number of the person who will send the email
REC_TAB-SNDNO = SOUC-USRNO.
the sap username of the person who will send the email
REC_TAB-SNDNAM = SY-UNAME.
get the user info for the receiver of the document
SELECT SINGLE * FROM SOUC WHERE SAPNAM = D_USERNAME.
IF SY-SUBRC NE 0.
WRITE : / TEXT-001, D_USERNAME. "usnam.
EXIT.
ENDIF.
the user number of the person who will receive the email ( USR )
REC_TAB-RECNO = SOUC-USRNO.
the user type of the person who will receive the email ( USR )
REC_TAB-RECTP = SOUC-USRTP.
the user year of the person who will receive the email ( USR )
REC_TAB-RECYR = SOUC-USRYR.
the priority of the email ( highest )
REC_TAB-SNDPRI = '1'.
check for delivery on the email
REC_TAB-DELIVER = 'X'.
send express so recipient knows there is a problem
REC_TAB-SNDEX = 'X'.
check for a return receipt
REC_TAB-READ = 'X'.
the sap username of the person receiving the email
REC_TAB-ADR_NAME = D_USERNAME. "usnam.
add this receiver to the internal table
APPEND REC_TAB.
CLEAR REC_TAB.
call the function to create the object in the outbox of the sender
CALL FUNCTION 'SO_OBJECT_INSERT'
EXPORTING
FOLDER_ID = FOLDER_ID
OBJECT_HD_CHANGE = OBJECT_HD_CHANGE
OBJECT_TYPE = OBJECT_TYPE
OWNER = SY-UNAME
IMPORTING
OBJECT_ID = NEW_OBJECT_ID
TABLES
OBJCONT = OBJCONT
OBJHEAD = OBJHEAD
OBJPARA = OBJPARA
OBJPARB = OBJPARB
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
DL_NAME_EXIST = 4
FOLDER_NOT_EXIST = 5
FOLDER_NO_AUTHORIZATION = 6
OBJECT_TYPE_NOT_EXIST = 7
OPERATION_NO_AUTHORIZATION = 8
OWNER_NOT_EXIST = 9
PARAMETER_ERROR = 10
SUBSTITUTE_NOT_ACTIVE = 11
SUBSTITUTE_NOT_DEFINED = 12
SYSTEM_FAILURE = 13
X_ERROR = 14
OTHERS = 15.
IF SY-SUBRC NE 0.
MESSAGE A063(ZR53) WITH SY-SUBRC.
EXIT.
ENDIF.
call the function to send the already created email to the receivers
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
FOLDER_ID = FOLDER_ID
OBJECT_ID = NEW_OBJECT_ID
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
TABLES
RECEIVERS = REC_TAB
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
FOLDER_NOT_EXIST = 4
FOLDER_NO_AUTHORIZATION = 5
FORWARDER_NOT_EXIST = 6
NOTE_NOT_EXIST = 7
OBJECT_NOT_EXIST = 8
OBJECT_NOT_SENT = 9
OBJECT_NO_AUTHORIZATION = 10
OBJECT_TYPE_NOT_EXIST = 11
OPERATION_NO_AUTHORIZATION = 12
OWNER_NOT_EXIST = 13
PARAMETER_ERROR = 14
SUBSTITUTE_NOT_ACTIVE = 15
SUBSTITUTE_NOT_DEFINED = 16
SYSTEM_FAILURE = 17
TOO_MUCH_RECEIVERS = 18
USER_NOT_EXIST = 19
X_ERROR = 20
OTHERS = 21.
IF SY-SUBRC EQ 0.
MESSAGE I035(ZR53) WITH NEW_OBJECT_ID D_USERNAME. "usnam.
ELSE.
MESSAGE I036(ZR53) WITH D_USERNAME." sy-subrc.
ENDIF.
ENDFORM. " CREATE_AND_SEND_MAIL_OBJECT
award points if useful,
Aleem. -
I have recently ran through the ExceptionHandling sample project, and I am attempting to extend it slightly.
I have created a Business Exception object called Test_Exception. Within this exception object, I have created three attributes: id, activity, message. The idea behind these properties is that I can set their values when an exception is thrown. I also created a notifyException method that I use to send this information to someone who is charged with investigating/handling these exceptions.
I have a Process Exception flow that looks like this: Process Exceptions >> Notify Exception Handler >> Exception Review. The transition to, "Notify Exception Handler," references my Test_Exception object. The variable that will hold the exception is the default, "exceptionHolder."
So I have some code in an Automatic activity that looks like this:
try{
Test.doSomething();
}catch (Exception ex){
Test_Exception te = new Test_Exception();
te.instanceId = this.id.id;
logMessage("TE Instance = " + te.instanceId + ".");
te.activity = this.activity.name;
logMessage("TE Activity = " + te.activity + ".");
te.message = "Message = " + ex.message + "\rStackTrace = " + ex.stackTrace;
logMessage("TE Message = " + te.message + ".");
throw te;
I can look at the logs and see that te's attributes are being populated.
In, "Notify Exception Handler," there is code to send mail using the attributes of the Test_Exception object.
Mail email = new Mail();
email.recipient = "[email protected]";
email.from = "[email protected]";
email.subject = "An Exception Has Occured";
email.message = "Instance, " + Test_Exception.instanceId + ", in Activity, " + Test_Exception.activity + ", has encountered a problem."
"\r\rError Details: " + Test_Exception.message + "\r\rThank you.";
email.send();
Here, the attributes of the Business Exception are blank. Does anyone have any thoughts or opinions about this approach?You notification code should look more like the code below. Because exceptionHolder is of type any you must first cast it to a Test_Exception.
Test_Exception te = ((Test_Exception)exceptionHolder);
Mail email = new Mail();
email.recipient = "[email protected]";
email.from = "[email protected]";
email.subject = "An Exception Has Occured";
email.message = "Instance, " + te.instanceId + ", in Activity, " + te.activity + ", has encountered a problem."
"\r\rError Details: " + te.message + "\r\rThank you.";
email.send(); -
How to create idoc and send it frm one sap to another sap
hi,
can anyone tell me the complete procedure of creating the idoc and sending it to another sap r/3
how to create rfc destination, partner profiles, port and outbound parameter and inbound parameter
thanksHi Azhar,
Go through the following Links
IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Go through the following Steps for Creating IDoc Via ALE
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards
Sreeni -
Encrypt data send from a non-SAP system to ECC.
Hi,
We are tryign to encrypt the credit card details send from web (non-sap system) via a xml file to ECC.
From Basis side, I have exported the public key from the ECC for the web server to encrypt the CC details while sending via xml.
The external web consultants encrypted the cc detail with the public key and send it via xml but that was not able to decrypt at the ECC side.
The developers were using the FM 'CCARD_DEVELOPE'at ECC to decrypt the data in the xml file. It was saying SSF error: No data transfered.
Meanwhile SAP CryptoLib is installed and credit card encryption/decryption is working fine for CC details entered via GUI interface.
Is there anything I am missing out here to encrypt CC details send from a Non-SAP system to ECC.? Do we need to load the SAP cryptolib in the non-SAP system to ecrypt this data at the senders end. Or is there a alternate solution for this ?
We are in ECC6.0/RHEL/Oracle10204.
Appreciate your help.
ThanksHi Nelis,
Thanks for your reply.
This note does not get any information regarding encrypting data from a non-SAP system to SAp system.
I am looking setup/information for encrypting data from a non-SAP system to SAP system.
Thanks -
Information about SAP PPM needed
Dear Sir or Madam,
my name is Jennifer Fassbender and I am working in the “Project Management Office” (PMO) of the research and development department (R&D) of ERCO. Our group serves as a cut surface in between the R&D and to other departments all over the company. Our team is in charge of the PLP (product launch process) which is one the leading processes at ERCO.
Currently we are using the SAP PS in our ERP system to plan and control our product development projects which belong to the PLP. We are working on a lot of different projects simultaneously, which makes a multi-project management necessary. Therefore we are thinking about implementing SAP PPM.
In addition to my job I am studying industrial engineering in part time at the University of Applied Sciences in Hagen. Right now I am writing my bachelor’s thesis. To combine study and job, the content and aim of this thesis will be something like “Development of an operational scenario to use the tool SAP PPM regarding to the design of a multi-project management within the R&D department of the ERCO GmbH”.
And this is the reason I am writing to you. I need a lot of information about SAP PPM.
Could you please be so kind and help me with the following questions:
Can you describe the (biggest) difference between SAP PS and SAP PPM?
What might be the mayor reason to implement SAP PPM?
What are the main use cases for SAP PPM?
Are there difficulties to run SAP PS together with SAP PPM?
Can you send me a detailed cost plan or license model?
Thank you so much in advance for your help!
Kind regards
Jennifer FassbenderHi Jennifer,
Answering to your questions-
Can you describe the (biggest) difference between SAP PS and SAP PPM?
In PPM, there are 2 areas, PPM-Portfolio Management and PPM Project Management. SAP PS can be compared with PPM-Project Management.
PPM-Proj, Mgmt. is mainly used for certain types of projects like Consulting, development & IT projects and User interface(UI) is very simple and user-friendly in PPM.
PS can be used in any type of projects but its full capabilities are used in capital Investment, overhead costs & customer projects. And moreover SAP PS has very good tight integration with all modules of SAP.
Overall both has it's own pros and cons. More details can be found the below links.
Which is the difference between SAP PPM & SAP PS?
2. What might be the mayor reason to implement SAP PPM?
3. What are the main use cases for SAP PPM?
Major reason could be cross-project resource planning, portfolio management for better financial & capacity planning across projects etc.,
4. Are there difficulties to run SAP PS together with SAP PPM?
By standard, SAP PPM is having integration with SAP PS. Under Portfolio management we can use any of the project managements tools(PPM-Project management, SAP PS & MS Project) for detailing the project & resource planning.
5. Can you send me a detailed cost plan or license model?
Licensing terms varies for different customers, so it is better to contact your local SAP accounts manager for details.
Hope this helps.
Regards,
Ravi -
How will we send smtp mail from SAP via Exchange
Hi;
We changed SAP OS between Windows and Linux and still 4.6c . Now we use linux OS.
We used smtp mail at SAP via Exchange with 3.party (sendmail,indigomail etc.) But Now I dont know how will we send smtp mail from SAP.
Please help me,
Thanks for answers.
Moderator message: not directly related to ABAP development, please have look in the Netweaver forums, also search for available information on sending emails.
Edited by: Thomas Zloch on Nov 22, 2010 2:39 PMHi,
What is the nature of the URL you wish to include in the e-mail ?
Is it fixed or dynamic ?
Cheers
Colin. -
Send binary files from SAP System to SAP XI/PI
Dear experts,
in our SAP ERP-System we have a link to JPG files which are stored in an archive. We want to send these files with some other information to our SAP XI and then store them on a file server. Is there a way to send a MIME attachment via RFC? Or is there another way to send binary files from SAP ERP to SAP XI? We want to avoid polling the files on OS level.
Thanks and regards,
DavidMost recommended way is to go for ABAP proxies. They support attachments.
Regards,
Prateek -
Hi,
I am using utl_mail package to send email in html format.
I am able to send the emails successfully, but there is a delay in completion of my procedure holding utl_mail and delivery of the mail.
I guess the utl_mail.send will not wait for the mail to be completely delivered to the recipients mail box/ nor does this package return any output parameter.
How would i determine if the mail has been successfully sent to the concerned recipient?
Is there a log or an oracle table where in i can monitor/track mails sent through utl_mail.send.
Please also let me know if there are any specific defined exceptions for utl_mail package(ex: utl_file.invalid_mode)
I have been searchin for such information in books and documentations but with minimal use.
Please throw some light on this or direct me to any documents having these information.
Regards,
Hemantuser13321434 wrote:
From that can I confirm that posting an email alone would be the functioning of utl_mail.send?Yes. This procedure connects to a SMTP server, says helo to it, provides the sender and recipient e-mail addresses, and then sends it the actual e-mail message itself.
If that is so what use can a when_others exception be for the block holding the call for utl_mail.sendWhen the conversation with the e-mail server fails. For example, the server may not accept connections from the Oracle database server. You may have formatted the recipient or sender e-mail addresses incorrectly. The mail server may expect authentication (username and password). The mail server may deem that you are attempting to relay e-mail (illegal as per Internet standards these days, in order to reduce spam holes). Etc.
Any such error, will result in the mail server returning an error code in response to a SMTP command. The UTL_MAIL package will detect that the SMTP command it send failed and will then raise an exception as a result.
Will any kind of errors produced by SMTP sent to the senders inbox?, like let say an incorrect email address had been passed to utl_mail package?The SMTP server only sends errors to the sender's inbox when it has problems delivering the mail. This means that is accepted the mail from the client - in this case, from the PL/SQL code using UTL_MAIL. It had no problems with the SMTP conversation itself. However, it ran into some form of delivery/transmission problem attempting to process that mail - and that will (should) result in firing off an e-mail to the sender to inform the sender of the problem.
Not all e-mail received from the mail server like that are failures - it could be a simple warning. For example, if the mail server needs to connect to domain foo.com for delivering your mail, and the mail server at foo.com does not respond, the mail server will queue that mail and retry the transmission later. It may (usually do) send the sender an e-mail to inform the sender that there is a problem with transmission, that it is not an error, and that it will retry the transmission later. This is called a soft bounce (not yet an error).
A hard bounce will be for example receiving a mail from the mail server informing you that the recipient's mail box is full and that it cannot accept any mail. In this case, it is an error - your mail to that recipient failed. Or you may receive an e-mail saying that the recipient does not exist at that domain (no mail box found to accept the mail). Or you may hit a spam filter and the mail server telling you that it does not accept e-mail from your mail server. All such errors are hard bounces that result in the original e-mail being rejected for delivery somewhere along the line.
Also keep in mind that you do not know whether your e-mail arrived at its destination mailbox. There are no mechanisms in SMTP that allows that. You can mark an e-mail header with a tag that instructs the mail reader used by the recipient, to fire off a response e-mail to you when the recipient receives or open the e-mail. But this relies on that mail reader to honour the request. I always turn that option off in my mail readers.
The only way to determine e-mail delivery is to send a URL in the mail and asking the recipient to click it when receiving the mail - e.g. approach used for registering an e-mail address as an account with a web site. Send the same e-mail again in 24 hours when not receiving the URL click in response. After another 24 hours deem the recipient as not interested or not reachable.
Maybe you are looking for
-
Can somebody help me figure this out? So before a road trip I rented a movie on my Ipad mini. The movie fully loaded before I left. It downloaded under wifi. Now that I'm in the car I tried to watch the movie but it isn't working. When I press play a
-
What are end user tools in BEx suite?
Hi, I have following doubts in reporting..Can any one pls help me? (i).What BI content do we need to install (or activate) to view the result of the query in Web Report and Excel Report form? I understand that once the query is designed, it can be ex
-
The titles are not saved when i quit
After quiting FCPX the titles i have made are not saved for next time i open a project. Some titles are saved sometime?
-
What is the cost for Final Cut Pro if I don't have a previous version to update?
What is the cost for Final Cut Pro if I don't have a previous version to update? I see the $299 price for updates. What is the brand new purchase price?
-
How to acquire 3 phase signals
Greetings I need to analyze three sinusoidal signals 120 degrees out of phase by nature including my version of LabVIEW 7.1 and the acquisition card I used is the Measurement Computing USB 1208FS. In principle the acquisition and display them individ