Serial vi build problems

Hello All,
My Configuration:
WIndows 7 64bit
LabVIEW 2010 32bit with application builder SP1
My application runs fine as source code but when I build it the serial vis used do not work and report the following error:
-1073807246
Property Node (arg 1) in VISA Configure Serial Port (Instr).vi->Initialize Serial.vi
Is there a work around for this problem?
Thanx,
Karl
Attachments:
Initialize Serial.vi ‏25 KB

jkarl wrote:
Hello All,
So it turns out that LabVIEW can hold open this port and I may not have closed it properly as well in my code, but the problem goes away when I exit LabVIEW and run my executable without LabVIEW resident
Thanx,
Karl
That is correct. Which is why you need to close out your ports when you are done with them.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

OC4J 10.1.3 production: Build problem Adventure Builder 1.0.1 using EJB 3.0

Hi all,
I tried to use the migration to EJB 3.0 of the Adventure Builder 1.01 from Debu Panda and had some build problems.
Does anybody know if this demo was tested with the production version of 10.1.3?
I used the standalone version and had to tweak a lot of entries in ant-oracle.xml.
Is it possible that the migration was done with a preview release? Have there been so many changes? I had to include a bunch of additional JARs e.g ${J2EE_HOME}/lib/adminclient.jar, ${ORACLE_HOME}/webservices/lib/wsclient.jar. ${ORACLE_HOME}/lib/xmlparserv2.jar
and others.
Also I had to change some task definitions as I guess that the contents of ${ORACLE_HOME}/j2ee/utilities/ant-oracle-classes.jar must have changed...
If I did not do something terribly wrong it would be nice if you could update the example to save other people from this nightmare of running from one build error to the next!
Regards,
Eric

Hi Debu,
thanks for your reply. I've used an previously installed ant 1.6.5 from ant.apache.org, but I don't think this should matter, or?
As far as I could see one of the problems is related to the version of ant-oracle-classes.jar in ${ORACLE_HOME}/j2ee/utilities which the example relies on.
In the adventure builder ant-oracle.xml you'll find task definitions like that:
taskdef resource="oracle/ant/taskdefs/deploy/antlib.xml" uri="http://www.oracle.com/ant/taskdefs" loaderRef="oracle.tasks.loader">which does not match with what one can find in ${ORACLE_HOME}/j2ee/utilities/ant-oracle-classes.jar
So from my point of view this has to be changed to
<taskdef resource="oracle/antlib.xml" uri="antlib:oracle" loaderRef="oracle.tasks.loader">I also had to change some libs... That's why I thought this example was made and tested with an earlier version of oc4j 10.1.3 (maybe a preview version).
Regards,
Eric

Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

This is planned to be fixed in the next release.

Application Builder problem on one server but not another

I am having an Application Builder problem. When I get into App Express and go inside the builder and try to edit a listed application, I get an “http 404 the page cannot be found. The page might have had its name changed or is temporarily unavailable” situation. I can get into SQL commands, utilities, and administrative activities. I can also run the application. Also, if I go onto a different server with App Express on it, I can get into the builder and edit applications with no trouble. Our DBA had the server in question rebooted a little over a week ago and that took care of the problem for a couple days. Any ideas? Is this an Express problem or a server problem? He had also tried restarting Express before he had the reboot done and that didn’t help.
Thank you for any help.
Cordially,
Robert J. Smith

I have messages from the Apache error log files from the dates I was getting the builder error. For future reference, I will post them below. The builder has been working fine lately.
Robert Smith
** error log messages follow **
[Mon Jul 16 07:25:12 2007] [error] [client 147.159.5.134] [ecid:
79143788610,1] File does not exist:
/app/oracle/oraappsrv10g/forms/java/java/awt/KeyboardFocusManager.class
[Mon Jul 16 07:25:12 2007] [error] [client 147.159.5.134] [ecid:
79143788611,1] File does not exist:
/app/oracle/oraappsrv10g/forms/java/java/awt/event/MouseWheelListener.class
[Mon Jul 16 07:25:13 2007] [error] [client 147.159.5.134] [ecid:
83438757083,1] File does not exist:
/app/oracle/oraappsrv10g/forms/java/oracle/forms/registry/default.dat

[svn] 2142: swfutils: Somehow a Java 1.5 API (Integer.valueOf(int)) slipped into the 30x branch, and has only sporadically caused build problems.

Revision: 2142
Author: [email protected]
Date: 2008-06-18 15:17:01 -0700 (Wed, 18 Jun 2008)
Log Message:
swfutils: Somehow a Java 1.5 API (Integer.valueOf(int)) slipped into the 30x branch, and has only sporadically caused build problems.
* By "somehow" I mean it was my injection :)
* Apparently this compiles in 1.4.2 on a Mac, go figure? I assume Windows JDK doesn't accept it.
* Replaced it with 'new Integer(int)'
Reviewer: Matt, community folks
Bugs: n/a
QA: no
Doc: no
Modified Paths:
flex/sdk/branches/3.0.x/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.java

Revision: 2142
Author: [email protected]
Date: 2008-06-18 15:17:01 -0700 (Wed, 18 Jun 2008)
Log Message:
swfutils: Somehow a Java 1.5 API (Integer.valueOf(int)) slipped into the 30x branch, and has only sporadically caused build problems.
* By "somehow" I mean it was my injection :)
* Apparently this compiles in 1.4.2 on a Mac, go figure? I assume Windows JDK doesn't accept it.
* Replaced it with 'new Integer(int)'
Reviewer: Matt, community folks
Bugs: n/a
QA: no
Doc: no
Modified Paths:
flex/sdk/branches/3.0.x/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.java

Serial Communication problem in LabVIEW 7.0

I recently upgraded my test computer from a 450 Mhz machine to a
Del 2.8 Ghz Pentium 4processor with 512meg's of ram using Windows 2000 for the operating system running LabVIEW 7.0.
I use the serial port to communicate with a piece of hardware,
Rs232, 115200 baud, 8 bits, 2 stop bits. NO hardware or software handshaking
The hardware is capable of receiving data from the computer at a full 115200 baud up to 65k transfers at a time with no extra delays.
The problem that the serial data coming from the new Dell computer will send out 2 bytes then waits 2 to 3 milliseconds and sends 2 more bytes.
I generated a separate serial VI that will jest shove data out the serial port.
The VI is a VISA configure serial po
rt, into a while loop that contains 6 VISA Write VI
And on the backside of the wile loop a VISA close.
The above VI will generate the serial data stream as stated above
EXCEPT when I put a PROBE on each of the ERROR OUT of the 6 writes, then the serial port will generate a continuous serial data stream with no millisecond breaks.
I have changed the FIFO Buffer settings (all the possible combinations) of the serial port in Windows 2000, and that has hade no effect.
Any help would be greatly appreciated
James Zumstein
E-mail [email protected]
Attachments:
Serial_Test_1.vi ‏45 KB

Greetings!
Serial port commucations problems can be a real joy, can't they? Have you tried communicating with your instrument with Hyperterm? Usually Hyperterm is capable of operating with almost no overhead, so you can see if there's any strange symbols being transmitted that might be holding things up. There might be an extra CR being inserted, or something like that, which will show up as heiroglyphics in Hyperterm. See if all your symbols coming back are valid. This is where I usually start.
Hope this helps.
Eric
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

JavaFx2 Samples DataApp Build Problems

Download Samples
http://download.oracle.com/otn/java/javafx/2.1.1-b04/javafx_samples-2_1_1-windows.zip
From:http://www.oracle.com/technetwork/java/javafx/downloads/index.html
And follow : DataApp Installation Guide
---Running the Sample
---Start the server:
---In NetBeans, right-click the DataAppServer project.
---Select Run.
---Wait until a browser window opens that says: YOU ARE DONE!
A : Build Problem?
ant -f D:\\DataApp\\DataAppServer -DforceRedeploy=false -Ddirectory.deployment.supported=true -Dnb.wait.for.caches=true run
check-mysql-drivers-installed:
D:\DataApp\DataAppServer\build.xml:72: D:\DataApp\DataAppServer\${j2ee.server.home}\lib does not exist.
构建失败 (总时间: 0 秒)
I have install C:\Program Files\glassfish-3.1.2
Any suggestions?

ant -f D:\\DataApp\\DataAppServer -DforceRedeploy=false clean dist
check-mysql-drivers-installed:
init:
undeploy-clean:
deps-clean:
DataAppClient.init:
DataAppClient.deps-clean:
Updating property file: D:\DataApp\DataAppClient\build\built-clean.properties
DataAppLibrary.init:
DataAppLibrary.deps-clean:
Updating property file: D:\DataApp\DataAppClient\build\built-clean.properties
Deleting directory D:\DataApp\DataAppLibrary\build
DataAppLibrary.clean:
Duplicated project name in import. Project jfx-impl defined first in D:\DataApp\DataAppClient\nbproject\jfx-impl.xml and again in D:\DataApp\DataAppPreloader\nbproject\jfx-impl.xml
DataAppPreloader.init:
DataAppPreloader.deps-clean:
Updating property file: D:\DataApp\DataAppClient\build\built-clean.properties
Deleting directory D:\DataApp\DataAppPreloader\build
DataAppPreloader.clean:
Deleting directory D:\DataApp\DataAppClient\build
DataAppClient.clean:
DataAppLibrary.init:
DataAppLibrary.deps-clean:
Created dir: D:\DataApp\DataAppLibrary\build
Updating property file: D:\DataApp\DataAppLibrary\build\built-clean.properties
Deleting directory D:\DataApp\DataAppLibrary\build
DataAppLibrary.clean:
do-clean:
check-clean:
clean:
check-mysql-drivers-installed:
init:
deps-module-jar:
DataAppClient.init:
DataAppClient.deps-jar:
Created dir: D:\DataApp\DataAppClient\build
Updating property file: D:\DataApp\DataAppClient\build\built-jar.properties
DataAppLibrary.init:
DataAppLibrary.deps-jar:
Created dir: D:\DataApp\DataAppLibrary\build
Updating property file: D:\DataApp\DataAppClient\build\built-jar.properties
Created dir: D:\DataApp\DataAppLibrary\build\classes
Created dir: D:\DataApp\DataAppLibrary\build\classes\META-INF
Copying 1 file to D:\DataApp\DataAppLibrary\build\classes\META-INF
Created dir: D:\DataApp\DataAppLibrary\build\empty
Created dir: D:\DataApp\DataAppLibrary\build\generated-sources\ap-source-output
Compiling 29 source files to D:\DataApp\DataAppLibrary\build\classes
警告: [options] 未与 -source 1.6 一起设置引导类路径
注: Creating non-static metadata factory ...
注: Found Option : eclipselink.canonicalmodel.use_static_factory, with value: false
注: Optional file was not found: META-INF/orm.xml continuing with generation.
注: Optional file was not found: META-INF/eclipselink-orm.xml continuing with generation.
注: Found Option : eclipselink.canonicalmodel.use_static_factory, with value: false
注: Optional file was not found: META-INF/orm.xml continuing with generation.
注: Optional file was not found: META-INF/eclipselink-orm.xml continuing with generation.
警告: 以下选项未被任何处理程序识别: '[eclipselink.canonicalmodel.use_static_factory]'
注: 某些输入文件使用了未经检查或不安全的操作。
注: 有关详细信息, 请使用 -Xlint:unchecked 重新编译。
1 个警告
Copying 1 file to D:\DataApp\DataAppLibrary\build\classes
DataAppLibrary.compile:
Created dir: D:\DataApp\DataAppLibrary\dist
Copy libraries to D:\DataApp\DataAppLibrary\dist\lib.
Building jar: D:\DataApp\DataAppLibrary\dist\DataAppLibrary.jar
To run this application from the command line without Ant, try:
C:\Program Files\Java\jdk1.7.0_05/bin/java -jar "D:\DataApp\DataAppLibrary\dist\DataAppLibrary.jar"
DataAppLibrary.jar:
Duplicated project name in import. Project jfx-impl defined first in D:\DataApp\DataAppClient\nbproject\jfx-impl.xml and again in D:\DataApp\DataAppPreloader\nbproject\jfx-impl.xml
DataAppPreloader.init:
DataAppPreloader.deps-jar:
Created dir: D:\DataApp\DataAppPreloader\build
Updating property file: D:\DataApp\DataAppClient\build\built-jar.properties
Created dir: D:\DataApp\DataAppPreloader\build\classes
Created dir: D:\DataApp\DataAppPreloader\build\empty
Created dir: D:\DataApp\DataAppPreloader\build\generated-sources\ap-source-output
Compiling 2 source files to D:\DataApp\DataAppPreloader\build\classes
Copying 5 files to D:\DataApp\DataAppPreloader\build\classes
DataAppPreloader.compile:
Created dir: D:\DataApp\DataAppPreloader\dist
Copying 1 file to D:\DataApp\DataAppPreloader\build
Not copying library D:\DataApp\DataAppPreloader\dist\DataAppPreloader.jar , it can't be read.
Nothing to copy.
Building jar: D:\DataApp\DataAppPreloader\dist\DataAppPreloader.jar
To run this application from the command line without Ant, try:
C:\Program Files\Java\jdk1.7.0_05/bin/java -jar "D:\DataApp\DataAppPreloader\dist\DataAppPreloader.jar"
Detected JavaFX Ant API version 1.1
DataAppPreloader.jfx-deployment:
DataAppPreloader.jar:
Created dir: D:\DataApp\DataAppClient\build\classes
Created dir: D:\DataApp\DataAppClient\build\empty
Created dir: D:\DataApp\DataAppClient\build\generated-sources\ap-source-output
Compiling 19 source files to D:\DataApp\DataAppClient\build\classes
注: 某些输入文件使用了未经检查或不安全的操作。
注: 有关详细信息, 请使用 -Xlint:unchecked 重新编译。
Copying 27 files to D:\DataApp\DataAppClient\build\classes
DataAppClient.compile:
Created dir: D:\DataApp\DataAppClient\dist
Copying 27 files to D:\DataApp\DataAppClient\dist\lib
Moving 1 file to D:\DataApp\DataAppClient\dist
Expanding: D:\DataApp\DataAppClient\dist\lib\DataAppLibrary.jar into D:\DataApp\DataAppClient\build\classes
Expanding: D:\DataApp\DataAppClient\dist\lib\jackson-core-asl-1.7.1.jar into D:\DataApp\DataAppClient\build\classes
Expanding: D:\DataApp\DataAppClient\dist\lib\jackson-jaxrs-1.7.1.jar into D:\DataApp\DataAppClient\build\classes
Expanding: D:\DataApp\DataAppClient\dist\lib\jackson-mapper-asl-1.7.1.jar into D:\DataApp\DataAppClient\build\classes
Expanding: D:\DataApp\DataAppClient\dist\lib\jackson-xc-1.7.1.jar into D:\DataApp\DataAppClient\build\classes
Expanding: D:\DataApp\DataAppClient\dist\lib\jersey-client-1.8.jar into D:\DataApp\DataAppClient\build\classes
Expanding: D:\DataApp\DataAppClient\dist\lib\jersey-core-1.8.jar into D:\DataApp\DataAppClient\build\classes
Expanding: D:\DataApp\DataAppClient\dist\lib\jersey-json-1.8.jar into D:\DataApp\DataAppClient\build\classes
Deleting directory D:\DataApp\DataAppClient\dist\lib
D:\DataApp\DataAppServer\nbproject\build-impl.xml:860: The following error occurred while executing this line:
D:\DataApp\DataAppClient\build.xml:48: Problem: failed to create task or type javafx:com.sun.javafx.tools.ant:application
Cause: The name is undefined.
Action: Check the spelling.
Action: Check that any custom tasks/types have been declared.
Action: Check that any <presetdef>/<macrodef> declarations have taken place.
No types or tasks have been defined in this namespace yet
构建失败 (总时间: 25 秒)

[svn:osmf:] 17245: Fix build problems for Zeri Certification Projects.

Revision: 17245
Revision: 17245
Author:   [email protected]
Date:     2010-08-09 17:20:33 -0700 (Mon, 09 Aug 2010)
Log Message:
Fix build problems for Zeri Certification Projects.
Modified Paths:
    osmf/trunk/apps/certification/zeri/FlexUnit4UIListener/flexunit4uilistener-build-config-1 0-1.xml
    osmf/trunk/apps/certification/zeri/ZeriCertificationPlayer/zericertificationplayer-build- config-10-1.xml
    osmf/trunk/apps/certification/zeri/ZeriCertificationTest/src/ZeriCertificationTest.mxml
    osmf/trunk/apps/certification/zeri/ZeriCertificationTest/src/ZeriTests.mxml
    osmf/trunk/apps/certification/zeri/ZeriCertificationTest/zericertificationtest-build-conf ig-10-1.xml

Revision: 17245
Revision: 17245
Author:   [email protected]
Date:     2010-08-09 17:20:33 -0700 (Mon, 09 Aug 2010)
Log Message:
Fix build problems for Zeri Certification Projects.
Modified Paths:
    osmf/trunk/apps/certification/zeri/FlexUnit4UIListener/flexunit4uilistener-build-config-1 0-1.xml
    osmf/trunk/apps/certification/zeri/ZeriCertificationPlayer/zericertificationplayer-build- config-10-1.xml
    osmf/trunk/apps/certification/zeri/ZeriCertificationTest/src/ZeriCertificationTest.mxml
    osmf/trunk/apps/certification/zeri/ZeriCertificationTest/src/ZeriTests.mxml
    osmf/trunk/apps/certification/zeri/ZeriCertificationTest/zericertificationtest-build-conf ig-10-1.xml

NWDS and DC Build Problem

Hi,
I recently installed a new version of NWDS on my workstation. This was an upgrade to Version 7.0.10 For some reason my DC will no longer build successfully since using the 7.0.10 version of NWDS. The error I get is:
/userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: /mydc : Build failed for /mydc in variant "default": null
Thanks,
Brian

Hi All
I facing same problem. Can you help me how to resolve this. I want to convert existing WebDynpro project into NWDI. I followed two ways to achieve it.
1) I followed step by step in this help link
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/42/c8204dd57f136fe10000000a1553f7/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/42/c8204dd57f136fe10000000a1553f7/frameset.htm</a>.
2) I newly created one DC (WebDynpro) project and there is an option "Import from existing local project" option.
I used both of them still there build problems in my DC.

Flex installation and serial number, activation problem.

Hello guys,
After the installation of Adobe Flex Builder 3 in my pc, I provide the right serial number
to the software to activate it. The software takes the serial as good, but
when I close and then I open Flex again, he ask the serial again.
I do this with administrator account…
Someone had the same problem?
Do you know if it should depends on Windows Vista configuration?
Note: this Flex license was used in other old Pc that now still not working.
Thank you, Fabio.

Vihamil are you utilizing the serial number registered under your account at http://www.adobe.com/. You can find more details on how to locate your registered serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

New build problems

This is my first build, I have been and bought all the parts, I think it would have been wiser to take advice first!
K7N2 mobo
Athlon XP2400
512 DDR PC3200
Gigabyte Radeon 9200
Maxtor Plus9 SATA 120GB
Pioneer DVD120S
Windows XP Home Upgrade
Antec Sonata Mini Tower with 380 watt PSU
All assembled and checked. On firing up neither the dvd drive or hard drive are recognised by the BIOS.
I have installed drives before, so I don't think its anything obvious?
Help please Sebastian

Hi,
Thanks for your reply. After a nights sleep, rechecked conections and discovered I hadn't quite pushed home the Ide ribbon connecter for the DVD into the mobo!
So the continuing saga....
Started to Install Win XP Home..
Installed Promise376 Serial ATA Driver floppy from F6 prompt.
It installed the fasttx2K driver
When setup asked for Win 98 CD it then came up with the following:
Partitioning disk
0 MB Disk 0 at Id 0 on bus 0 on fasttx2K
The problem caused by the following file: setupdd.sys
PAGE_FAULT_IN_NONPAGED_AREA
setupdd.sys - Address F84C5F3E base at F84A1000, Date stamp 3d6dd67f
I used the Maxtor Powermax v4.06 to check for the hard disk and it couldn't find it.
Rechecked the settings and connections. Serial ATA cable attached to primary SATA conector. power supply plugged in and hard disk buzzing. No jumpers installed.
I havent set up the array settings at start of bootup as I only have one hard disk.
Sebastian

XML Forms Builder - problem with checkbox

Hi,
I have created many checkboxes in XML Forms Builder and if I want to create a new document based on this "Form" I have still checked one of checkboxes. I would like to have all empty checkboxes becasue user should check the appropriate checkboxes.
Do you know how to resolve this problem?
Thaks for help!
Regards,
Andrzej Tabara

Hi,
is it always the same checkbox that is already filled in? Is this ckeckbox based on a metadata-definition?
If yes: You could maybe have a look at the metadata-definition. Is there maybe a default-value defined?
Kind reagrds
Karin

Export Release Build - Problem with Server Settings

Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
When i click the button i get the server setting.
Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost
whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

Export Release Build Problem

I am using Adobe Flex Builder 3 on Windows 7. When I got to export a release build to publish the project, the bin-release folder does not get all necessary files. All of the .mxml files are not copied to the folder. This just started happening out of the blue for some reason and had been operating properly prior. If I select the option to view source files I can see the files that should have been copied by Extracting the zip file that contains the viewable source, but they do not copy on their own.

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

Query Builder problem - query results from previous query

Hi.
I have a 100% repeatable problem in Oracle Query Builder (Version 6.0.7.1.0) where some rows from the results of a previous query appear in the results for the current query. The queries being run are saved in *.brw files. If I close down Query Builder completely between queries, there is no problem. If I run one query, export the results to a CSV file, close that query and then open a second query, when I run the second query there are rows in the results that shouldn't be there (they are remnants of the first query). Interestingly the total number of rows for the second query is correct, so the same number of rows are missing as shouldn't be there. Anyone come across this before? Problem is repeatable for different database users and on different computers.
regards,
Martin

as i posted earlier .. queryBuilder as a stand alone product is neither supported nor available anymore. it is only available as part of the report data wizard.
thanks,
ph.

Serial vi build problems

Similar Messages

Maybe you are looking for