Server not starting after kernel upgrade
Hi,
I did a SAP Kernel upgrade of Patch 146 in NW2004s Unicode system
After the kernel upgrade, the SAP is not starting
Pls let me know of what can be teh reason
The following is dev_disp file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid BWS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2204
Mon Jun 16 13:02:04 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2204) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Jun 16 13:02:09 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWS01_BWS_01 <
DpShMCreate: sizeof(wp_adm) 23680 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE80050, size: 6347104)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE87DD0
DpShMCreate: allocated tm_adm at 000000000EE87E30
DpShMCreate: allocated wp_ca_adm at 000000000F3EBCD0
DpShMCreate: allocated appc_ca_adm at 000000000F3F1A90
DpShMCreate: allocated comm_adm at 000000000F3F39D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F47A660
DpShMCreate: allocated gw_adm at 000000000F47A6E0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F47A710
DpShMCreate: allocated wall_adm at 000000000F47A720
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3496
argv[0] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BWS
argv[7] = -DSAPMYNAME=WDBSSAPBWS01_BWS_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWS01) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >WDBSSAPBWS01_BWS_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Mon Jun 16 13:02:11 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 340
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2447) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3496)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Jun 16 13:02:49 2008
ERROR => DpHdlDeadWp: W0 (pid 3504) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 3380) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4348) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 4528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4360) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 788) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4432) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W8 (pid 3376) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W9 (pid 3632) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W10 (pid 3928) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W12 (pid 3316) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4956) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 1136) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 4968) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:02:59 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Jun 16 17:02:59 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3504 Ended no 1 0 0
1 DIA 3380 Ended no 1 0 0
2 DIA 4348 Ended no 1 0 0
3 DIA 3528 Ended no 1 0 0
4 DIA 4528 Ended no 1 0 0
5 DIA 4360 Ended no 1 0 0
6 DIA 788 Ended no 1 0 0
7 DIA 4432 Ended no 1 0 0
8 UPD 3376 Ended no 1 0 0
9 ENQ 3632 Ended no 1 0 0
10 BTC 3928 Ended no 1 0 0
11 BTC 3304 Ended no 1 0 0
12 BTC 3316 Ended no 1 0 0
13 BTC 4956 Ended no 1 0 0
14 SPO 1136 Ended no 1 0 0
15 UP2 4968 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jun 16 17:02:59 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Mon Jun 16 17:02:59 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jun 16 17:02:59 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:04 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWS01_BWS_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1724) (SOFT_KILL)
Stop icman
killing process (2860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1724 HANDLE:448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1724 HANDLE:448)
wait for end of icman
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2860 HANDLE:456)
[DpProcDied] Process died (PID:3496 HANDLE:432)
DpStartStopMsg: send stop message (myname is >WDBSSAPBWS01_BWS_01 <)
NiIMyHostName: hostname = 'WDBSSAPBWS01'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Jun 16 13:03:17 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 364 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 364 (pos=3)
SiSelNRemove: removed sock 364
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/16
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 364
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2204) [dpxxdisp.c 10421]
Good Bye .....
Are you sure the Database and the listeners are up and running?
Similar Messages
-
SAP does not start after Kernel Upgrade
Hi
We were carrying out the Kernel upgrade on our HPUX 11.23 and Oracle, R3 Quality System. From Kernel 196 to Kernel 221
After carrying taking a backup of the current exe folder we have copied the new exe ( after Uncar )
We restarted the system
We then started the Lsnrctl and it started successfully.
After login in as SIDadm and issuing the startsap command it gives the following error message in the startup log
Execute Pre-Startup Commands
(2987) Local: rm -f ms.sapEEQ_SCS01
(2990) Local: ln -s -f /usr/sap/EEQ/SYS/exe/runU/msg_server ms.sapEEQ_SCS01
(2993) Local: rm -f en.sapEEQ_SCS01
(2996) Local: ln -s -f /usr/sap/EEQ/SYS/exe/runU/enserver en.sapEEQ_SCS01
Starting Programs
sh: /usr/sap/EEQ/SYS/exe/runU/sapcontrol: not found.
(3002) Starting: local ms.sapEEQ_SCS01 pf=/usr/sap/EEQ/SYS/profile/EEQ_SCS01_eqc
r3
(3003) Starting: local en.sapEEQ_SCS01 pf=/usr/sap/EEQ/SYS/profile/EEQ_SCS01_eqc
r3
(2976) Waiting for Child Processes to terminate.
(2976) **** 2008/04/17 22:18:28 Child 3002 terminated with Status 150 . ****
(2976) **** 2008/04/17 22:18:28 Child 3003 terminated with Status 150 . ****
(2976) **** No more Child Processes to wait for.
(2976) Parent Shutdown at 2008/04/17 22:18:28
Execute Post-Shutdown Commands
sh: /usr/sap/EEQ/SYS/exe/runU/sapcontrol: not found.
(2976) Exiting with Return-Code 3.
Startup of Instance failed (No more child processes)
After this we have restored the backup....after restart etc...it still gives the same error
Can anyone exeperienced such a problem. Would appricate if you could share on how you resolved the same.
Regards,
Milind KaroorHi Milind!
Just make sure that you have uncarred both OS dependent and independent files
And also make sure that you copy to the existing folder of RUN (make sure your folder name is RUN)after taking a backup.
As You copy it asks to overwrite, then you overwrite the existing ones.
By doing this some of the files which will not be present in the new Kernel will be present., sometimes this may be also one of the reason
As i have faced the same problem
Thanks,
KIRAN
Edited by: kiran d on Apr 18, 2008 12:54 PM -
"disp+work" process in not getting started after kernel upgradation
Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 55
M sid TNG
M systemid 562 (PC with Windows NT)
M relno 7410
M patchlevel 0
M patchno 42
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid 2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm) 24288 (1104)
M DpShMCreate: sizeof(tm_adm) 51472080 (256080)
M DpShMCreate: sizeof(ca_adm) 432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm) 7583152 (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm) 520080 (1016)
M DpShMCreate: sizeof(vmc_adm) 0 (3208)
M DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm) (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm) 64
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c 2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M pid = 2392
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M workerType = DP_WORKER_DIAWP
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M report = > <
M action = 0
M tab_name = > <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for 64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tngC *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB -
The Connection Server does not start after an upgrade to BO4.1 SP3
Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
GerdHi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting. -
SLD will not start after I upgraded Netweaver 2004s Portal
SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
It gives me the following J2EE error:
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]Hi ,
as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
See the threads below for more information
NetWeaver 2004s upgradation problems
Could not run WebDynpro Tutorial - NoClassDefFoundError
Points are welcome if it is useful
Koti Reddy -
Central Instance didn't start after Kernel Upgrade
Hello,
I've made a Kernel Upgrade for a Solution Manager with kernel version: release 7.01, 64-Bit Unicode on Microsoft Windows Server 2003 Enterprise x64 Edition.
When I wanted the SAP instance, Central Services instance started, but Central Instance didn't.
In the sapstart.log file the following error: "SAPSTART finished successfully on , but at least one process doesn't run correctly:
sapstart.exe=>sapparam (1c): No Profile used."
The file "dev_w0" says the following:
in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThCallDbBreak: use db_sqlbreak
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1
B db_sqlbreak() = 1
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20091025 070423 BCE-SAP-SRV01
B 000 001 +DBO+0000 000000476 DISCONNECTED NO NO NO 000 255 255 20100114 204611 BCE-SAP-SRV01
B Disconnected from connection 0
B statistics db_con_commit (com_total=730465, com_tx=135964)
B statistics db_con_rollback (roll_total=9630, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 10744) [dpnttool.c 334]
I didn't really know what to do in this case... Could you please give me a hint?
I also want to tell you that the Database Instance (MSSQL server) disappeared from SAP MMC, but I checked in SQL Server Configuration Manager and the processes are running...
Thank you in advance for your help,
NoemiPlease check the Wndows event log, you may have run into the problem described in
Note 1402510 - Resolving SideBySide Assembly Errors
Note 1375494 - SAP system does not start after applying SAP kernel patch
Markus -
Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.
I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
I do not use a firewall or virus program.
My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
It is either a Ubuntu problem or a Firefox problem.
Sonny.''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that). -
ORA-27101: shared memory realm does not exist after kernel upgrade
Hi,
I have installed ECC 6.0 on windows 32 bit. After I upgraded the kernel, the database can't be started as well as SAP. When I checked the logs, the error ORA-27101: shared memory realm does not exist was encountered.
M calling db_connect ...
C Prepending E:\usr\sap\ERP\DVEBMGS01\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ERP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06E217E8 06E26D84 06E2660C
C Attaching to DB Server ERP (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C Starting user session (con_hdl=0,svchp=06E26558,srvhp=06E38144,usrhp=06E4CEB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 11042]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@ERP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06E217E8 06E26D84 06E2660C
C Attaching to DB Server ERP (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C Starting user session (con_hdl=0,svchp=06E26558,srvhp=06E38144,usrhp=06E4CEB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 11042]
B ***LOG BV3=> severe db error 1034 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1034 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
Please help.
Thanks.
Regards.Hi. First restart the server, then start the LISTENER, and repeat startsap again. Check if messages repeated. Regards.
-
Intel wireless iwl3945 does not work after kernel upgrade?
My wireless ethernet will not longer connect to access points. I am on a Toshiba Tecra M5-S4332 running kernel 2.6.39.2-1 with linux-firmware 20110512-2 installed. This problem seemed to have started once I upgraded the kernel from 2.6.39.1-1, but I have tried downgrading (back to 2.6.38) and upgrading (to 3.0-rc6) the kernel to no avail. Other possibly relevant packages that were upgraded at that system upgrade were module-init-tools (3.13-1 -> 3.16-1), mkinitcpio (0.6.14-1 -> 0.6.15-1), nvidia-utils (270.41.19-1 -> 275.09.07-1), nvidia (270.41.19-3 -> 275.09.07-1), and netcfg (2.5.5-1 -> 2.6.1-1).
My complete dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011
[ 0.000000] Command line: root=/dev/sda3 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec28000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: TOSHIBA TECRA M/Portable PC, BIOS Version 3.40 05/28/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FEDA0000 mask FFFFE0000 write-back
[ 0.000000] 1 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ cff8a000-cff90000
[ 0.000000] RAMDISK: 37ddb000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f01e0 00014 (v00 TOSHIB)
[ 0.000000] ACPI: RSDT 00000000cff90000 0004C (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: FACP 00000000cff90074 00084 (v02 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: DSDT 00000000cff900f8 07B63 (v02 TOSHIB A003B 20070222 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000000eee00 00040
[ 0.000000] ACPI: SSDT 00000000cff97c5b 00306 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.000000] ACPI: BOOT 00000000cff9004c 00028 (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: APIC 00000000cff98813 00068 (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: MCFG 00000000cff9887b 0003C (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: HPET 00000000cff988b7 00038 (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: TCPA 00000000cff988ef 00032 (v02 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: SLIC 00000000cff98921 00176 (v01 TOSHIB A003B 20060821 TASM 04010000)
[ 0.000000] ACPI: SSDT 00000000cff98a97 00076 (v02 TOSHIB A003B 20060912 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 00000000cff98b0d 00327 (v02 TOSHIB A003B 20061102 MSFT 0100000E)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000cff90000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-00000000cff90000
[ 0.000000] NODE_DATA [00000000cff85000 - 00000000cff89fff]
[ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800cc200000-ffff8800ceffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] On node 0 totalpages: 851743
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11591 pages used for memmap
[ 0.000000] DMA32 zone: 836169 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xd808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000
[ 0.000000] PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000
[ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s83136 r8192 d23360 u1048576
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 840091
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3347820k/3407424k available (4019k kernel code, 452k absent, 59152k reserved, 3335k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 27262976 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.050 MHz processor.
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.35 BogoMIPS (lpj=6650166)
[ 0.003494] pid_max: default: 32768 minimum: 301
[ 0.003694] Security Framework initialized
[ 0.003778] AppArmor: AppArmor disabled by boot time parameter
[ 0.004309] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009415] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011099] Mount-cache hash table entries: 256
[ 0.011683] Initializing cgroup subsys ns
[ 0.011765] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.011858] Initializing cgroup subsys cpuacct
[ 0.011970] Initializing cgroup subsys memory
[ 0.012068] Initializing cgroup subsys devices
[ 0.012147] Initializing cgroup subsys freezer
[ 0.012223] Initializing cgroup subsys net_cls
[ 0.012300] Initializing cgroup subsys blkio
[ 0.012440] CPU: Physical Processor ID: 0
[ 0.012517] CPU: Processor Core ID: 0
[ 0.012593] mce: CPU supports 6 MCE banks
[ 0.012675] CPU0: Thermal monitoring handled by SMI
[ 0.012681] using mwait in idle threads.
[ 0.014125] ACPI: Core revision 20110316
[ 0.018114] ftrace: allocating 15965 entries in 63 pages
[ 0.020057] Setting APIC routing to flat
[ 0.020510] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056062] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 0.056663] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.056663] PEBS disabled due to CPU errata.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073453] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100008] Booting Node 0, Processors #1 Ok.
[ 0.100146] smpboot cpu 1: start_ip = 9a000
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.196691] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203326] Brought up 2 CPUs
[ 0.203404] Total of 2 processors activated (7983.62 BogoMIPS).
[ 0.204795] devtmpfs: initialized
[ 0.207100] PM: Registering ACPI NVS region at eee00 (512 bytes)
[ 0.207684] print_constraints: dummy:
[ 0.207851] NET: Registered protocol family 16
[ 0.208056] ACPI: bus type pci registered
[ 0.208302] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.208397] PCI: not using MMCONFIG
[ 0.208471] PCI: Using configuration type 1 for base access
[ 0.209016] bio: create slab <bio-0> at 0
[ 0.211054] ACPI: EC: Look up EC in DSDT
[ 0.212357] ACPI: Actual Package length (12) is larger than NumElements field (4), truncated
[ 0.212511]
[ 0.214491] ACPI: SSDT 00000000cff982a3 000F3 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.214999] ACPI: Dynamic OEM Table Load:
[ 0.215194] ACPI: SSDT (null) 000F3 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.215455] ACPI: SSDT 00000000cff9840c 0034E (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.215954] ACPI: Dynamic OEM Table Load:
[ 0.216148] ACPI: SSDT (null) 0034E (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.216495] ACPI: SSDT 00000000cff98396 00076 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.216949] ACPI: Dynamic OEM Table Load:
[ 0.217144] ACPI: SSDT (null) 00076 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.217381] ACPI: SSDT 00000000cff9875a 00079 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.217882] ACPI: Dynamic OEM Table Load:
[ 0.218158] ACPI: SSDT (null) 00079 (v02 TOSHIB A003B 20060907 MSFT 0100000E)
[ 0.218524] ACPI: Interpreter enabled
[ 0.218602] ACPI: (supports S0 S3 S4 S5)
[ 0.218924] ACPI: Using IOAPIC for interrupt routing
[ 0.219016] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.227009] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.271058] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.271139] HEST: Table not found.
[ 0.271215] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.271475] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.271657] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.271660] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.271663] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.271666] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.271668] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xefffffff] (ignored)
[ 0.271671] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfebfffff] (ignored)
[ 0.271674] pci_root PNP0A08:00: host bridge window [mem 0xfec28000-0xfecfffff] (ignored)
[ 0.271676] pci_root PNP0A08:00: host bridge window [mem 0xfed00400-0xfed13fff] (ignored)
[ 0.271679] pci_root PNP0A08:00: host bridge window [mem 0xfed1a000-0xfed1bfff] (ignored)
[ 0.271681] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.271684] pci_root PNP0A08:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored)
[ 0.271687] pci_root PNP0A08:00: host bridge window [mem 0xfedc0000-0xfedfffff] (ignored)
[ 0.271689] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffafffff] (ignored)
[ 0.271692] pci_root PNP0A08:00: host bridge window [mem 0xffc00000-0xffdfffff] (ignored)
[ 0.271704] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
[ 0.271752] pci 0000:00:01.0: [8086:27a1] type 1 class 0x000604
[ 0.271790] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.271794] pci 0000:00:01.0: PME# disabled
[ 0.271860] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.271882] pci 0000:00:1b.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
[ 0.271965] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271970] pci 0000:00:1b.0: PME# disabled
[ 0.271999] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.272083] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.272088] pci 0000:00:1c.0: PME# disabled
[ 0.272120] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.272205] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.272210] pci 0000:00:1c.1: PME# disabled
[ 0.272243] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.272328] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.272333] pci 0000:00:1c.2: PME# disabled
[ 0.272367] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.272424] pci 0000:00:1d.0: reg 20: [io 0xafe0-0xafff]
[ 0.272464] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.272521] pci 0000:00:1d.1: reg 20: [io 0xaf80-0xaf9f]
[ 0.272561] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.272617] pci 0000:00:1d.2: reg 20: [io 0xaf60-0xaf7f]
[ 0.272657] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.272713] pci 0000:00:1d.3: reg 20: [io 0xaf40-0xaf5f]
[ 0.272765] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.272790] pci 0000:00:1d.7: reg 10: [mem 0xffaffc00-0xffafffff]
[ 0.272879] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.272885] pci 0000:00:1d.7: PME# disabled
[ 0.272909] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.272995] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.273109] pci 0000:00:1f.0: quirk: [io 0xd800-0xd87f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.273206] pci 0000:00:1f.0: quirk: [io 0xeec0-0xeeff] claimed by ICH6 GPIO
[ 0.273322] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.273466] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.273487] pci 0000:00:1f.2: reg 10: [io 0xaf38-0xaf3f]
[ 0.273500] pci 0000:00:1f.2: reg 14: [io 0xaf34-0xaf37]
[ 0.273512] pci 0000:00:1f.2: reg 18: [io 0xaf28-0xaf2f]
[ 0.273524] pci 0000:00:1f.2: reg 1c: [io 0xaf24-0xaf27]
[ 0.273536] pci 0000:00:1f.2: reg 20: [io 0xaf10-0xaf1f]
[ 0.273581] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.273586] pci 0000:00:1f.2: PME# disabled
[ 0.273651] pci 0000:01:00.0: [10de:01da] type 0 class 0x000300
[ 0.273667] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.273685] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.273703] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.273725] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.273775] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.273876] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.273947] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.273950] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.273955] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.274108] pci 0000:02:00.0: [8086:109a] type 0 class 0x000200
[ 0.274139] pci 0000:02:00.0: reg 10: [mem 0xffde0000-0xffdfffff]
[ 0.274181] pci 0000:02:00.0: reg 18: [io 0xcfe0-0xcfff]
[ 0.274322] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.274330] pci 0000:02:00.0: PME# disabled
[ 0.274367] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.274526] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.274597] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.274602] pci 0000:00:1c.0: bridge window [mem 0xffd00000-0xffdfffff]
[ 0.274610] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.274672] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.274743] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.274748] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.274756] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.274876] pci 0000:05:00.0: [8086:4222] type 0 class 0x000280
[ 0.274932] pci 0000:05:00.0: reg 10: [mem 0xffcff000-0xffcfffff]
[ 0.276851] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.276864] pci 0000:05:00.0: PME# disabled
[ 0.276934] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.277043] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.277114] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.277119] pci 0000:00:1c.2: bridge window [mem 0xffc00000-0xffcfffff]
[ 0.277127] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.277197] pci 0000:06:0b.0: [104c:8039] type 2 class 0x000607
[ 0.277223] pci 0000:06:0b.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.277252] pci 0000:06:0b.0: supports D1 D2
[ 0.277254] pci 0000:06:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.277261] pci 0000:06:0b.0: PME# disabled
[ 0.277286] pci 0000:06:0b.1: [104c:803a] type 0 class 0x000c00
[ 0.277312] pci 0000:06:0b.1: reg 10: [mem 0x00000000-0x000007ff]
[ 0.277327] pci 0000:06:0b.1: reg 14: [mem 0x00000000-0x00003fff]
[ 0.277418] pci 0000:06:0b.1: supports D1 D2
[ 0.277421] pci 0000:06:0b.1: PME# supported from D0 D1 D2 D3hot
[ 0.277427] pci 0000:06:0b.1: PME# disabled
[ 0.277454] pci 0000:06:0b.3: [104c:803c] type 0 class 0x000805
[ 0.277479] pci 0000:06:0b.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.277580] pci 0000:06:0b.3: supports D1 D2
[ 0.277582] pci 0000:06:0b.3: PME# supported from D0 D1 D2 D3hot
[ 0.277588] pci 0000:06:0b.3: PME# disabled
[ 0.277643] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.277716] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.277722] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.277730] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.277733] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.277736] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.277790] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[ 0.277903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.277967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.278039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.278076] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXCB._PRT]
[ 0.278108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MPEX._PRT]
[ 0.278144] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.278295] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.278836] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.281796] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 0.282073] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
[ 0.282602] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
[ 0.283130] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
[ 0.283636] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
[ 0.284164] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
[ 0.284691] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
[ 0.285223] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
[ 0.285810] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.285895] vgaarb: loaded
[ 0.286058] PCI: Using ACPI for IRQ routing
[ 0.286126] PCI: pci_cache_line_size set to 64 bytes
[ 0.286226] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.286229] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.286371] NetLabel: Initializing
[ 0.286437] NetLabel: domain hash size = 128
[ 0.286504] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.286586] NetLabel: unlabeled traffic allowed by default
[ 0.286664] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.286739] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.287010] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.296665] Switching to clocksource hpet
[ 0.299803] Switched to NOHz mode on CPU #0
[ 0.299891] Switched to NOHz mode on CPU #1
[ 0.304354] pnp: PnP ACPI init
[ 0.304444] ACPI: bus type pnp registered
[ 0.305074] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.305077] pnp 00:00: [mem 0x000e0000-0x000fffff]
[ 0.305079] pnp 00:00: [mem 0x00100000-0xcff8ffff]
[ 0.305081] pnp 00:00: [mem 0xcff90000-0xcff9ffff]
[ 0.305084] pnp 00:00: [mem 0xcffa0000-0xcfffffff]
[ 0.305086] pnp 00:00: [mem 0xfec00000-0xfec27fff]
[ 0.305088] pnp 00:00: [mem 0xfed14000-0xfed19fff]
[ 0.305090] pnp 00:00: [mem 0xfed1c000-0xfed1ffff]
[ 0.305092] pnp 00:00: [mem 0xfed20000-0xfed3ffff]
[ 0.305094] pnp 00:00: [mem 0xfed45000-0xfed8ffff]
[ 0.305096] pnp 00:00: [mem 0xfeda0000-0xfedbffff]
[ 0.305098] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[ 0.305100] pnp 00:00: [mem 0xffb00000-0xffbfffff]
[ 0.305102] pnp 00:00: [mem 0xffe00000-0xffffffff]
[ 0.305176] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.305248] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.305318] system 00:00: [mem 0x00100000-0xcff8ffff] could not be reserved
[ 0.305389] system 00:00: [mem 0xcff90000-0xcff9ffff] has been reserved
[ 0.305459] system 00:00: [mem 0xcffa0000-0xcfffffff] has been reserved
[ 0.305530] system 00:00: [mem 0xfec00000-0xfec27fff] could not be reserved
[ 0.305600] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.305671] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.305741] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.305812] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.305882] system 00:00: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 0.305952] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.306023] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.306097] system 00:00: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.306169] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.320363] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[ 0.320409] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.320482] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.346696] pnp 00:02: [bus 00-ff]
[ 0.346698] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.346701] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.346703] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.346705] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.346708] pnp 00:02: [mem 0x000d0000-0x000dffff window]
[ 0.346710] pnp 00:02: [mem 0xd0000000-0xefffffff window]
[ 0.346712] pnp 00:02: [mem 0xf4000000-0xfebfffff window]
[ 0.346714] pnp 00:02: [mem 0xfec28000-0xfecfffff window]
[ 0.346717] pnp 00:02: [mem 0xfed00400-0xfed13fff window]
[ 0.346719] pnp 00:02: [mem 0xfed1a000-0xfed1bfff window]
[ 0.346721] pnp 00:02: [mem 0xfed40000-0xfed44fff window]
[ 0.346724] pnp 00:02: [mem 0xfed90000-0xfed9ffff window]
[ 0.346726] pnp 00:02: [mem 0xfedc0000-0xfedfffff window]
[ 0.346728] pnp 00:02: [mem 0xfee01000-0xffafffff window]
[ 0.346730] pnp 00:02: [mem 0xffc00000-0xffdfffff window]
[ 0.346792] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.346941] pnp 00:03: [io 0x0000-0x000f]
[ 0.346943] pnp 00:03: [io 0x0081-0x0083]
[ 0.346945] pnp 00:03: [io 0x0087]
[ 0.346947] pnp 00:03: [io 0x0089-0x008b]
[ 0.346949] pnp 00:03: [io 0x008f]
[ 0.346951] pnp 00:03: [io 0x00c0-0x00df]
[ 0.346953] pnp 00:03: [dma 4]
[ 0.346985] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.347002] pnp 00:04: [io 0x0061]
[ 0.347037] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.347048] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.347060] pnp 00:05: [irq 13]
[ 0.347091] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.347116] pnp 00:06: [io 0x0060]
[ 0.347119] pnp 00:06: [io 0x0064]
[ 0.347125] pnp 00:06: [irq 1]
[ 0.347157] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.347183] pnp 00:07: [irq 12]
[ 0.347219] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.347230] pnp 00:08: [io 0x0070-0x0071]
[ 0.347236] pnp 00:08: [irq 8]
[ 0.347268] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.347639] pnp 00:09: [io 0x0080]
[ 0.347641] pnp 00:09: [io 0x0084-0x0086]
[ 0.347643] pnp 00:09: [io 0x0088]
[ 0.347645] pnp 00:09: [io 0x008c-0x008e]
[ 0.347647] pnp 00:09: [io 0x002e-0x002f]
[ 0.347649] pnp 00:09: [io 0x0062]
[ 0.347650] pnp 00:09: [io 0x0066]
[ 0.347652] pnp 00:09: [io 0x0480-0x048f]
[ 0.347654] pnp 00:09: [io 0xe000-0xe07f]
[ 0.347656] pnp 00:09: [io 0xe080-0xe0ff]
[ 0.347658] pnp 00:09: [io 0xe400-0xe47f]
[ 0.347660] pnp 00:09: [io 0xe480-0xe4ff]
[ 0.347662] pnp 00:09: [io 0xe800-0xe87f]
[ 0.347664] pnp 00:09: [io 0xe880-0xe8ff]
[ 0.347666] pnp 00:09: [io 0xec00-0xec7f]
[ 0.347667] pnp 00:09: [io 0xec80-0xecff]
[ 0.347669] pnp 00:09: [io 0xd800-0xd87f]
[ 0.347671] pnp 00:09: [io 0xd880-0xd89f]
[ 0.347673] pnp 00:09: [io 0xeeb0-0xeebf]
[ 0.347675] pnp 00:09: [io 0xeec0-0xeeff]
[ 0.347677] pnp 00:09: [io 0x0690-0x06ff]
[ 0.347679] pnp 00:09: [io 0x0010-0x001f]
[ 0.347681] pnp 00:09: [io 0x0024-0x0025]
[ 0.347683] pnp 00:09: [io 0x0028-0x0029]
[ 0.347685] pnp 00:09: [io 0x002c-0x002d]
[ 0.347686] pnp 00:09: [io 0x0030-0x0031]
[ 0.347692] pnp 00:09: [io 0x0034-0x0035]
[ 0.347694] pnp 00:09: [io 0x0038-0x0039]
[ 0.347696] pnp 00:09: [io 0x003c-0x003d]
[ 0.347698] pnp 00:09: [io 0x0050-0x0053]
[ 0.347700] pnp 00:09: [io 0x0063]
[ 0.347701] pnp 00:09: [io 0x0065]
[ 0.347703] pnp 00:09: [io 0x0072-0x0077]
[ 0.347705] pnp 00:09: [io 0x0090-0x009f]
[ 0.347707] pnp 00:09: [io 0x00a4-0x00a5]
[ 0.347709] pnp 00:09: [io 0x00a8-0x00a9]
[ 0.347711] pnp 00:09: [io 0x00ac-0x00ad]
[ 0.347713] pnp 00:09: [io 0x00b0-0x00b5]
[ 0.347715] pnp 00:09: [io 0x00b8-0x00b9]
[ 0.347717] pnp 00:09: [io 0x00bc-0x00bd]
[ 0.347719] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.347814] system 00:09: [io 0x0480-0x048f] has been reserved
[ 0.347884] system 00:09: [io 0xe000-0xe07f] has been reserved
[ 0.347954] system 00:09: [io 0xe080-0xe0ff] has been reserved
[ 0.348023] system 00:09: [io 0xe400-0xe47f] has been reserved
[ 0.348092] system 00:09: [io 0xe480-0xe4ff] has been reserved
[ 0.348161] system 00:09: [io 0xe800-0xe87f] has been reserved
[ 0.348231] system 00:09: [io 0xe880-0xe8ff] has been reserved
[ 0.348300] system 00:09: [io 0xec00-0xec7f] has been reserved
[ 0.348372] system 00:09: [io 0xec80-0xecff] has been reserved
[ 0.348442] system 00:09: [io 0xd800-0xd87f] has been reserved
[ 0.348511] system 00:09: [io 0xd880-0xd89f] has been reserved
[ 0.348580] system 00:09: [io 0xeeb0-0xeebf] has been reserved
[ 0.348649] system 00:09: [io 0xeec0-0xeeff] has been reserved
[ 0.348719] system 00:09: [io 0x0690-0x06ff] has been reserved
[ 0.348790] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.348860] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373796] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.373798] pnp 00:0a: [io 0x004e-0x004f]
[ 0.373800] pnp 00:0a: [io 0x0680-0x068f]
[ 0.373836] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.373854] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.373888] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.400457] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.400464] pnp 00:0c: [irq 4]
[ 0.427076] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.453838] pnp 00:0d: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 0.480366] pnp: PnP ACPI: found 14 devices
[ 0.480434] ACPI: ACPI bus type pnp unregistered
[ 0.487001] pci 0000:00:1e.0: BAR 15: assigned [mem 0xd0000000-0xd3ffffff pref]
[ 0.487085] pci 0000:00:1e.0: BAR 14: assigned [mem 0xd4000000-0xd9ffffff]
[ 0.487157] pci 0000:00:1b.0: BAR 0: assigned [mem 0xda000000-0xda003fff 64bit]
[ 0.487245] pci 0000:00:1b.0: BAR 0: set to [mem 0xda000000-0xda003fff 64bit] (PCI address [0xda000000-0xda003fff])
[ 0.487331] pci 0000:00:1e.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.487402] pci 0000:00:1c.1: BAR 15: assigned [mem 0xda100000-0xda2fffff 64bit pref]
[ 0.487485] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.487555] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.487623] pci 0000:00:01.0: bridge window [io disabled]
[ 0.487693] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.487765] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.487849] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.487918] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.487991] pci 0000:00:1c.0: bridge window [mem 0xffd00000-0xffdfffff]
[ 0.488064] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.488138] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.488208] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.488282] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.488355] pci 0000:00:1c.1: bridge window [mem 0xda100000-0xda2fffff 64bit pref]
[ 0.488441] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.488508] pci 0000:00:1c.2: bridge window [io disabled]
[ 0.488581] pci 0000:00:1c.2: bridge window [mem 0xffc00000-0xffcfffff]
[ 0.488654] pci 0000:00:1c.2: bridge window [mem pref disabled]
[ 0.488730] pci 0000:06:0b.0: BAR 15: assigned [mem 0xd0000000-0xd3ffffff pref]
[ 0.488811] pci 0000:06:0b.0: BAR 16: assigned [mem 0xd4000000-0xd7ffffff]
[ 0.488882] pci 0000:06:0b.1: BAR 1: assigned [mem 0xd8000000-0xd8003fff]
[ 0.488956] pci 0000:06:0b.1: BAR 1: set to [mem 0xd8000000-0xd8003fff] (PCI address [0xd8000000-0xd8003fff])
[ 0.489041] pci 0000:06:0b.0: BAR 0: assigned [mem 0xd8004000-0xd8004fff]
[ 0.489115] pci 0000:06:0b.0: BAR 0: set to [mem 0xd8004000-0xd8004fff] (PCI address [0xd8004000-0xd8004fff])
[ 0.489200] pci 0000:06:0b.1: BAR 0: assigned [mem 0xd8005000-0xd80057ff]
[ 0.489274] pci 0000:06:0b.1: BAR 0: set to [mem 0xd8005000-0xd80057ff] (PCI address [0xd8005000-0xd80057ff])
[ 0.489358] pci 0000:06:0b.0: BAR 13: assigned [io 0x1000-0x10ff]
[ 0.489427] pci 0000:06:0b.0: BAR 14: assigned [io 0x1400-0x14ff]
[ 0.489497] pci 0000:06:0b.3: BAR 0: assigned [mem 0xd8005800-0xd80058ff]
[ 0.489572] pci 0000:06:0b.3: BAR 0: set to [mem 0xd8005800-0xd80058ff] (PCI address [0xd8005800-0xd80058ff])
[ 0.489656] pci 0000:06:0b.0: CardBus bridge to [bus 07-0a]
[ 0.489724] pci 0000:06:0b.0: bridge window [io 0x1000-0x10ff]
[ 0.489796] pci 0000:06:0b.0: bridge window [io 0x1400-0x14ff]
[ 0.489871] pci 0000:06:0b.0: bridge window [mem 0xd0000000-0xd3ffffff pref]
[ 0.489954] pci 0000:06:0b.0: bridge window [mem 0xd4000000-0xd7ffffff]
[ 0.490039] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[ 0.490108] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.490182] pci 0000:00:1e.0: bridge window [mem 0xd4000000-0xd9ffffff]
[ 0.490254] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd3ffffff pref]
[ 0.490349] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.490420] pci 0000:00:01.0: setting latency timer to 64
[ 0.490429] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.490502] pci 0000:00:1c.0: setting latency timer to 64
[ 0.490510] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.490583] pci 0000:00:1c.1: setting latency timer to 64
[ 0.490592] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.490665] pci 0000:00:1c.2: setting latency timer to 64
[ 0.490673] pci 0000:00:1e.0: setting latency timer to 64
[ 0.490682] pci 0000:06:0b.0: enabling device (0000 -> 0003)
[ 0.490756] pci 0000:06:0b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.490832] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.490834] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.490837] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdffffff]
[ 0.490840] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.490842] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.490845] pci_bus 0000:02: resource 1 [mem 0xffd00000-0xffdfffff]
[ 0.490847] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.490849] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.490852] pci_bus 0000:03: resource 2 [mem 0xda100000-0xda2fffff 64bit pref]
[ 0.490855] pci_bus 0000:05: resource 1 [mem 0xffc00000-0xffcfffff]
[ 0.490857] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.490859] pci_bus 0000:06: resource 1 [mem 0xd4000000-0xd9ffffff]
[ 0.490862] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd3ffffff pref]
[ 0.490864] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.490867] pci_bus 0000:06: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.490869] pci_bus 0000:07: resource 0 [io 0x1000-0x10ff]
[ 0.490872] pci_bus 0000:07: resource 1 [io 0x1400-0x14ff]
[ 0.490874] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd3ffffff pref]
[ 0.490877] pci_bus 0000:07: resource 3 [mem 0xd4000000-0xd7ffffff]
[ 0.490963] NET: Registered protocol family 2
[ 0.491248] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.492732] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.499013] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.499934] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.500037] TCP reno registered
[ 0.500113] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.500238] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.500664] NET: Registered protocol family 1
[ 0.500886] pci 0000:01:00.0: Boot video device
[ 0.500912] PCI: CLS 32 bytes, default 64
[ 0.500979] Unpacking initramfs...
[ 0.535672] Freeing initrd memory: 2132k freed
[ 0.536590] Simple Boot Flag value 0xb read from CMOS RAM was invalid
[ 0.536662] Simple Boot Flag at 0x7c set to 0x1
[ 0.537206] audit: initializing netlink socket (disabled)
[ 0.537289] type=2000 audit(1310243563.536:1): initialized
[ 0.537864] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.540443] VFS: Disk quotas dquot_6.5.2
[ 0.540667] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.540930] msgmni has been set to 6542
[ 0.541262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.541390] io scheduler noop registered
[ 0.541459] io scheduler deadline registered
[ 0.541578] io scheduler cfq registered (default)
[ 0.541776] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.541814] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.541889] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.541942] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.542049] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.542102] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.542218] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.542271] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.542391] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.542462] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.542533] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.542560] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.542631] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.542704] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.542725] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.542799] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.542821] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.542891] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.542964] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.543061] intel_idle: MWAIT substates: 0x22220
[ 0.543063] intel_idle: does not run on family 6 model 15
[ 0.543073] ERST: Table is not found!
[ 0.543213] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.564034] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.757615] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.810208] Linux agpgart interface v0.103
[ 0.810379] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.814755] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.814861] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.815104] mousedev: PS/2 mouse device common for all mice
[ 0.815258] rtc_cmos 00:08: RTC can wake from S4
[ 0.834943] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.836797] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.836896] rtc0: alarms up to one year, 114 bytes nvram, hpet irqs
[ 0.836976] cpuidle: using governor ladder
[ 0.837042] cpuidle: using governor menu
[ 0.837348] TCP cubic registered
[ 0.837415] NET: Registered protocol family 17
[ 0.837490] Registering the dns_resolver key type
[ 0.837659] PM: Hibernation image not present or could not be loaded.
[ 0.837665] registered taskstats version 1
[ 0.838340] rtc_cmos 00:08: setting system clock to 2011-07-09 20:32:44 UTC (1310243564)
[ 0.838465] Initializing network drop monitor service
[ 0.840013] Freeing unused kernel memory: 712k freed
[ 0.840372] Write protecting the kernel read-only data: 6144k
[ 0.840765] Freeing unused kernel memory: 60k freed
[ 0.844098] Freeing unused kernel memory: 784k freed
[ 0.855991] udevd[48]: starting version 171
[ 0.939897] usbcore: registered new interface driver usbfs
[ 0.940955] usbcore: registered new interface driver hub
[ 0.941892] usbcore: registered new device driver usb
[ 0.969586] SCSI subsystem initialized
[ 0.976084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.976200] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.976293] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.976297] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.976415] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.983378] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.983460] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.987430] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.987451] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffaffc00
[ 0.999115] libata version 3.00 loaded.
[ 1.000039] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.000272] hub 1-0:1.0: USB hub found
[ 1.000342] hub 1-0:1.0: 8 ports detected
[ 1.002403] ata_piix 0000:00:1f.2: version 2.13
[ 1.002506] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.002584] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.005170] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.153375] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.153767] scsi0 : ata_piix
[ 1.153945] scsi1 : ata_piix
[ 1.154611] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xaf10 irq 14
[ 1.154682] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xaf18 irq 15
[ 1.154800] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.154904] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.154923] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.155059] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.160051] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000afe0
[ 1.160289] hub 2-0:1.0: USB hub found
[ 1.160360] hub 2-0:1.0: 2 ports detected
[ 1.160502] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.160577] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.160581] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.160655] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.180052] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000af80
[ 1.180261] hub 3-0:1.0: USB hub found
[ 1.180332] hub 3-0:1.0: 2 ports detected
[ 1.180469] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.180544] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.180548] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.180622] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.206720] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000af60
[ 1.206935] hub 4-0:1.0: USB hub found
[ 1.207006] hub 4-0:1.0: 2 ports detected
[ 1.207144] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.207220] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.207224] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.207298] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.216718] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000af40
[ 1.216926] hub 5-0:1.0: USB hub found
[ 1.216996] hub 5-0:1.0: 2 ports detected
[ 1.313799] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001M, max UDMA/100
[ 1.313873] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.320342] ata1.00: configured for UDMA/100
[ 1.320580] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5
[ 1.331080] ata2.00: ATAPI: PIONEER DVD-RW DVR-K16S, 1.17, max UDMA/33
[ 1.360458] ata2.00: configured for UDMA/33
[ 1.383510] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K16S 1.17 PQ: 0 ANSI: 5
[ 1.395021] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.395170] sd 0:0:0:0: [sda] Write Protect is off
[ 1.395242] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.395268] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.409585] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.409668] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.410066] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.429811] sda: sda1 sda2 sda3 sda4
[ 1.430324] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.486697] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 1.540020] Refined TSC clocksource calibration: 1994.999 MHz.
[ 1.540095] Switching to clocksource tsc
[ 2.014954] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.951205] udevd[245]: starting version 171
[ 4.375423] Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 4.377182] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 4.464646] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 4.464694] ACPI: Lid Switch [LID]
[ 4.464751] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.464757] ACPI: Power Button [PWRB]
[ 4.464806] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.464810] ACPI: Power Button [PWRF]
[ 4.468874] acpi device:1e: registered as cooling_device0
[ 4.469003] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input4
[ 4.469010] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 4.470072] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.470966] ACPI: AC Adapter [ADP1] (on-line)
[ 4.472259] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.472266] ACPI: Battery Slot [BAT1] (battery present)
[ 4.472287] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.472294] ACPI: Battery Slot [BAT2] (battery absent)
[ 4.511094] iTCO_vendor_support: vendor-support=0
[ 4.639541] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.639544] ACPI: Thermal Zone [THRM] (43 C)
[ 4.693186] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 4.693282] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0xd860)
[ 4.693360] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.711995] parport_pc 00:0d: [io 0x0378-0x037a]
[ 4.712003] parport_pc 00:0d: [io 0x0778-0x077a]
[ 4.712080] parport_pc 00:0d: [irq 7]
[ 4.712083] parport_pc 00:0d: [dma 1]
[ 4.721387] sdhci: Secure Digital Host Controller Interface driver
[ 4.721390] sdhci: Copyright(c) Pierre Ossman
[ 4.723125] sdhci-pci 0000:06:0b.3: SDHCI controller found [104c:803c] (rev 0)
[ 4.723223] sdhci-pci 0000:06:0b.3: enabling device (0000 -> 0002)
[ 4.723232] sdhci-pci 0000:06:0b.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 4.723275] _regulator_get: 0000:06:0b.3 supply vmmc not found, using dummy regulator
[ 4.723317] Registered led device: mmc0::
[ 4.723379] mmc0: SDHCI controller on PCI [0000:06:0b.3] using DMA
[ 4.737354] parport_pc 00:0d: activated
[ 4.737359] parport_pc 00:0d: reported by Plug and Play ACPI
[ 4.737430] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 4.820210] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.927881] intel_rng: FWH not detected
[ 4.960488] ppdev: user-space parallel port driver
[ 4.964564] leds_ss4200: no LED devices found
[ 5.067658] cfg80211: Calling CRDA to update world regulatory domain
[ 5.084335] firewire_ohci 0000:06:0b.1: enabling device (0000 -> 0002)
[ 5.084352] firewire_ohci 0000:06:0b.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 5.136777] firewire_ohci: Added fw-ohci device 0000:06:0b.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 5.336838] input: Toshiba input device as /devices/virtual/input/input5
[ 5.336895] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 5.336897] toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
[ 5.337522] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.344122] Registered led device: toshiba::illumination
[ 5.348189] ACPI: acpi_idle registered with cpuidle
[ 5.348320] Marking TSC unstable due to TSC halts in idle
[ 5.348764] Switching to clocksource hpet
[ 5.510961] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[ 5.530064] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 5.530067] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 5.530097] e1000e 0000:02:00.0: Disabling ASPM L1
[ 5.530118] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.530141] e1000e 0000:02:00.0: setting latency timer to 64
[ 5.530347] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 5.530741] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 5.542011] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8
[ 5.611580] yenta_cardbus 0000:06:0b.0: CardBus bridge found [1179:0001]
[ 5.611604] yenta_cardbus 0000:06:0b.0: Enabling burst memory read transactions
[ 5.611610] yenta_cardbus 0000:06:0b.0: Using CSCINT to route CSC interrupts to PCI
[ 5.611613] yenta_cardbus 0000:06:0b.0: Routing CardBus interrupts to PCI
[ 5.611619] yenta_cardbus 0000:06:0b.0: TI: mfunc 0x01aa1022, devctl 0x64
[ 5.636892] firewire_core: created device fw0: GUID 0000390000886031, S400
[ 5.654088] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:b7:a8:5b:e9
[ 5.654091] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 5.654169] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF
[ 5.696863] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.696933] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.813113] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5.813119] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5.813126] HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 5.813140] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.813203] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 5.813240] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.844531] yenta_cardbus 0000:06:0b.0: ISA IRQ mask 0x0c78, PCI irq 21
[ 5.844536] yenta_cardbus 0000:06:0b.0: Socket status: 30000006
[ 5.844541] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 5.844554] yenta_cardbus 0000:06:0b.0: pcmcia: parent PCI bridge window: [io 0x1000-0x1fff]
[ 5.844557] yenta_cardbus 0000:06:0b.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd9ffffff]
[ 5.844561] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd9ffffff: excluding 0xd4000000-0xd81fffff
[ 5.844574] yenta_cardbus 0000:06:0b.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd3ffffff pref]
[ 5.844577] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd3ffffff: excluding 0xd0000000-0xd3ffffff
[ 5.879954] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 5.879958] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 5.880080] iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.880095] iwl3945 0000:05:00.0: setting latency timer to 64
[ 5.921779] vboxdrv: Found 2 processor cores.
[ 5.922150] VBoxDrv: dbg - g_abExecMemory=ffffffffa05e5360
[ 5.922177] vboxdrv: fAsync=0 offMin=0x3c0 offMax=0x3294
[ 5.922677] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.922680] vboxdrv: Successfully loaded version 4.0.8_OSE (interface 0x00180000).
[ 5.935088] iwl3945 0000:05:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 5.935092] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 5.935238] iwl3945 0000:05:00.0: irq 46 for MSI/MSI-X
[ 5.935471] Registered led device: phy0-led
[ 6.076734] usb 3-2: new full speed USB device number 3 using uhci_hcd
[ 6.260350] input: HDA Intel Line In at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.365648] Bluetooth: Core ver 2.16
[ 6.365675] NET: Registered protocol family 31
[ 6.365678] Bluetooth: HCI device and connection manager initialized
[ 6.365681] Bluetooth: HCI socket layer initialized
[ 6.365682] Bluetooth: L2CAP socket layer initialized
[ 6.367059] Bluetooth: SCO socket layer initialized
[ 6.397150] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 6.423864] nvidia: module license 'NVIDIA' taints kernel.
[ 6.423869] Disabling lock debugging due to kernel taint
[ 6.470309] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.470788] usbcore: registered new interface driver btusb
[ 6.490429] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xe0000-0xfffff
[ 6.490499] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 6.490563] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 6.589542] cfg80211: World regulatory domain updated:
[ 6.589546] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.589549] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.589552] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.589555] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.589558] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.589561] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.589575] cfg80211: Calling CRDA for country: US
[ 6.592441] cfg80211: Regulatory domain changed to country: US
[ 6.592444] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.592447] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 6.592450] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 6.592453] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.592456] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.592459] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.592461] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 7.230839] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.230845] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.230855] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.230864] nvidia 0000:01:00.0: setting latency timer to 64
[ 7.230869] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.231025] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 275.09.07 Wed Jun 8 14:16:46 PDT 2011
[ 7.672048] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.024321] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.235206] Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k
[ 10.230429] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 10.283546] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 11.855962] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.855968] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 35.639276] NET: Registered protocol family 10
[ 46.030030] eth0: no IPv6 routers present
[ 542.872512] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
[ 542.941963] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Those last two lines are after running `sudo ifconfig wlan0 up`. Running the program, `sudo iwlist wlan0 scan`, comes up with an appropriate list of access points. Yet when I run `sudo netcfg -u profile`, I get a "FAIL" message and "wlan0: link is not ready" shows up again in dmesg.
Output of lsmod | grep iwl
iwl3945 74149 0
iwl_legacy 52750 1 iwl3945
mac80211 211822 2 iwl3945,iwl_legacy
cfg80211 146401 3 iwl3945,iwl_legacy,mac80211
Output of lspci for my networking cards
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
My ethernet controller (wired) works fine.EDIT: SOLVED
Solution: I feel sort of silly. I had mistaken my wifi switch for some sort of card eject/lock switch. Oh well, live and learn I suppose....
Hello I am having a similar problem. I tried to manually bring up my wireless device with the "ifconfig wlan0 up" but I get the following error:
SIOCSIFFLAGS: Operation not possible due to RF-kill
After some research I found a suggestion to install rfkill and ensure the following line was uncommented in /etc/conf.d/rfkill
RFKILL_UNBLOCK="all"
Then add rfkill to my /etc/rc.d/conf under daemons and restart. Despite this I still get the same error when I try to run the ifconfig command.
Here is my demsg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f692400 (usable)
[ 0.000000] BIOS-e820: 000000003f692400 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Dell Inc. Inspiron 1420 /0DT492, BIOS A01 07/10/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f692 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 3f468000 - 3f682000
[ 0.000000] Allocated new RAMDISK: 375e4000 - 377fdc50
[ 0.000000] Move RAMDISK from 000000003f468000 - 000000003f681c4f to 375e4000 - 377fdc4f
[ 0.000000] ACPI: RSDP 000fbbf0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 3f693e00 0005C (v01 DELL M08 27D7070A ASL 00000061)
[ 0.000000] ACPI: FACP 3f693c9c 000F4 (v04 DELL M08 27D7070A ASL 00000061)
[ 0.000000] ACPI: DSDT 3f694400 05633 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 3f6a2c00 00040
[ 0.000000] ACPI: HPET 3f693f00 00038 (v01 DELL M08 00000001 ASL 00000061)
[ 0.000000] ACPI: APIC 3f694000 00068 (v01 DELL M08 27D7070A ASL 00000047)
[ 0.000000] ACPI: MCFG 3f693fc0 0003E (v16 DELL M08 27D7070A ASL 00000061)
[ 0.000000] ACPI: SLIC 3f69409c 00024 (v01 DELL M08 27D7070A ASL 00000061)
[ 0.000000] ACPI: BOOT 3f693bc0 00028 (v01 DELL M08 27D7070A ASL 00000061)
[ 0.000000] ACPI: SSDT 3f6927b1 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f692
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f692
[ 0.000000] On node 0 totalpages: 259617
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f6df3200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32150 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b8000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6800000 s27648 r0 d21504 u2097152
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257587
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/5872116e-5d3c-4b91-8061-d3f4e14e0ada ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4155424 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f692)
[ 0.000000] Memory: 1016960k/1038920k available (3376k kernel code, 21508k reserved, 1390k data, 512k init, 129616k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f600c000 soft=f600e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1496.306 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.30 BogoMIPS (lpj=4987686)
[ 0.003469] pid_max: default: 32768 minimum: 301
[ 0.003587] Security Framework initialized
[ 0.003655] AppArmor: AppArmor disabled by boot time parameter
[ 0.003749] Mount-cache hash table entries: 512
[ 0.004058] Initializing cgroup subsys ns
[ 0.004125] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004209] Initializing cgroup subsys cpuacct
[ 0.004289] Initializing cgroup subsys memory
[ 0.004366] Initializing cgroup subsys devices
[ 0.004432] Initializing cgroup subsys freezer
[ 0.004498] Initializing cgroup subsys net_cls
[ 0.004564] Initializing cgroup subsys blkio
[ 0.006717] CPU: Physical Processor ID: 0
[ 0.006782] CPU: Processor Core ID: 0
[ 0.006847] mce: CPU supports 6 MCE banks
[ 0.006918] CPU0: Thermal monitoring enabled (TM2)
[ 0.006986] using mwait in idle threads.
[ 0.008485] ACPI: Core revision 20110316
[ 0.013347] ftrace: allocating 15225 entries in 30 pages
[ 0.016721] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.017179] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050261] CPU0: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz stepping 0d
[ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.053330] PEBS disabled due to CPU errata.
[ 0.053330] ... version: 2
[ 0.053330] ... bit width: 40
[ 0.053330] ... generic registers: 2
[ 0.053330] ... value mask: 000000ffffffffff
[ 0.053330] ... max period: 000000007fffffff
[ 0.053330] ... fixed-purpose events: 3
[ 0.053330] ... event mask: 0000000700000003
[ 0.070120] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.096678] CPU 1 irqstacks, hard=f60c8000 soft=f60ca000
[ 0.096681] Booting Node 0, Processors #1 Ok.
[ 0.096793] smpboot cpu 1: start_ip = 9b000
[ 0.006666] Initializing CPU#1
[ 0.193356] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.199993] Brought up 2 CPUs
[ 0.200057] Total of 2 processors activated (5987.49 BogoMIPS).
[ 0.201199] devtmpfs: initialized
[ 0.201466] print_constraints: dummy:
[ 0.201604] NET: Registered protocol family 16
[ 0.203475] ACPI: bus type pci registered
[ 0.203665] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.203749] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.203817] PCI: Using MMCONFIG for extended config space
[ 0.203882] PCI: Using configuration type 1 for base access
[ 0.203954] dmi type 0xB1 record - unknown flag
[ 0.204679] bio: create slab <bio-0> at 0
[ 0.204902] ACPI: EC: Look up EC in DSDT
[ 0.226159] ACPI: SSDT 3f6931b8 001C0 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.226708] ACPI: Dynamic OEM Table Load:
[ 0.226865] ACPI: SSDT (null) 001C0 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.227216] ACPI: SSDT 3f692c7d 004B6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.227731] ACPI: Dynamic OEM Table Load:
[ 0.227887] ACPI: SSDT (null) 004B6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.228404] ACPI: SSDT 3f693378 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.228935] ACPI: Dynamic OEM Table Load:
[ 0.229092] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.229399] ACPI: SSDT 3f693133 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.229916] ACPI: Dynamic OEM Table Load:
[ 0.230046] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.230473] ACPI: Interpreter enabled
[ 0.230541] ACPI: (supports S0 S3 S4 S5)
[ 0.230809] ACPI: Using IOAPIC for interrupt routing
[ 0.286877] ACPI: No dock devices found.
[ 0.286943] HEST: Table not found.
[ 0.287009] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.300195] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.325114] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.325119] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.325123] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.325127] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.325131] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xf7ffffff] (ignored)
[ 0.325135] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] (ignored)
[ 0.325139] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored)
[ 0.325143] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored)
[ 0.325147] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored)
[ 0.325151] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored)
[ 0.325154] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored)
[ 0.325158] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] (ignored)
[ 0.325173] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.325234] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
[ 0.325254] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit]
[ 0.325267] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.325276] pci 0000:00:02.0: reg 20: [io 0xeff8-0xefff]
[ 0.325321] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
[ 0.325338] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit]
[ 0.325447] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.325514] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f]
[ 0.325562] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.325630] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f]
[ 0.325695] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.325725] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
[ 0.325832] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.325840] pci 0000:00:1a.7: PME# disabled
[ 0.325875] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.325903] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.326002] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.326009] pci 0000:00:1b.0: PME# disabled
[ 0.326044] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.326147] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.326154] pci 0000:00:1c.0: PME# disabled
[ 0.326192] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.326295] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.326302] pci 0000:00:1c.1: PME# disabled
[ 0.326341] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[ 0.326445] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.326451] pci 0000:00:1c.3: PME# disabled
[ 0.326491] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[ 0.326595] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.326601] pci 0000:00:1c.5: PME# disabled
[ 0.326637] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.326711] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f]
[ 0.326759] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.326827] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f]
[ 0.326875] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.326942] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f]
[ 0.327008] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.327038] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
[ 0.327145] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.327152] pci 0000:00:1d.7: PME# disabled
[ 0.327181] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.327284] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.327414] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.327501] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[ 0.327573] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[ 0.327658] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[ 0.327786] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.327806] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
[ 0.327822] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
[ 0.327837] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
[ 0.327852] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
[ 0.327867] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf]
[ 0.327928] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.327961] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7]
[ 0.327976] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb]
[ 0.327991] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7]
[ 0.328006] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb]
[ 0.328021] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff]
[ 0.328036] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff]
[ 0.328094] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.328100] pci 0000:00:1f.2: PME# disabled
[ 0.328127] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.328148] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff]
[ 0.328198] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
[ 0.328318] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.328388] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.328395] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.328406] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.328583] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280
[ 0.328643] pci 0000:0c:00.0: reg 10: [mem 0xfe8ff000-0xfe8fffff]
[ 0.329003] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.329017] pci 0000:0c:00.0: PME# disabled
[ 0.329092] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.329256] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.329325] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.329332] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.329343] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.329416] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 0.329486] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.329493] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.329503] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.329654] pci 0000:09:00.0: [14e4:1713] type 0 class 0x000200
[ 0.329729] pci 0000:09:00.0: reg 10: [mem 0xfe5f0000-0xfe5fffff 64bit]
[ 0.330065] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 0.330079] pci 0000:09:00.0: PME# disabled
[ 0.330229] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[ 0.330299] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
[ 0.330306] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.330316] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.330374] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00
[ 0.330403] pci 0000:03:01.0: reg 10: [mem 0xfe4ff800-0xfe4fffff]
[ 0.330507] pci 0000:03:01.0: supports D1 D2
[ 0.330510] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330517] pci 0000:03:01.0: PME# disabled
[ 0.330543] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805
[ 0.330571] pci 0000:03:01.1: reg 10: [mem 0xfe4ff500-0xfe4ff5ff]
[ 0.330675] pci 0000:03:01.1: supports D1 D2
[ 0.330678] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330685] pci 0000:03:01.1: PME# disabled
[ 0.330712] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880
[ 0.330739] pci 0000:03:01.2: reg 10: [mem 0xfe4ff600-0xfe4ff6ff]
[ 0.330842] pci 0000:03:01.2: supports D1 D2
[ 0.330845] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330852] pci 0000:03:01.2: PME# disabled
[ 0.330878] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880
[ 0.330905] pci 0000:03:01.3: reg 10: [mem 0xfe4ff700-0xfe4ff7ff]
[ 0.331009] pci 0000:03:01.3: supports D1 D2
[ 0.331012] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.331019] pci 0000:03:01.3: PME# disabled
[ 0.331101] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.331173] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.331180] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.331190] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.331194] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.331198] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.331238] pci_bus 0000:00: on NUMA node 0
[ 0.331244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.331643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.331798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.331874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.331953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.332028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.332100] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.332167] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.346826] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.347217] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.347603] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[ 0.348041] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.348520] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.349285] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.350058] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.350808] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.351693] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.351794] vgaarb: loaded
[ 0.351988] PCI: Using ACPI for IRQ routing
[ 0.352053] PCI: pci_cache_line_size set to 64 bytes
[ 0.352214] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.352218] reserve RAM buffer: 000000003f692400 - 000000003fffffff
[ 0.352373] NetLabel: Initializing
[ 0.352437] NetLabel: domain hash size = 128
[ 0.352501] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.352581] NetLabel: unlabeled traffic allowed by default
[ 0.352662] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.352736] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.352984] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.363339] Switching to clocksource hpet
[ 0.366435] Switched to NOHz mode on CPU #0
[ 0.366544] Switched to NOHz mode on CPU #1
[ 0.372461] pnp: PnP ACPI init
[ 0.372551] ACPI: bus type pnp registered
[ 0.384786] pnp 00:00: [bus 00-ff]
[ 0.384791] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.384794] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.384798] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.384802] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.384805] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.384809] pnp 00:00: [mem 0x40000000-0xf7ffffff window]
[ 0.384812] pnp 00:00: [mem 0xfc000000-0xfebfffff window]
[ 0.384815] pnp 00:00: [mem 0xfec10000-0xfecfffff window]
[ 0.384819] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
[ 0.384822] pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
[ 0.384826] pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
[ 0.384829] pnp 00:00: [mem 0xfee10000-0xff9fffff window]
[ 0.384832] pnp 00:00: [mem 0xffb00000-0xffefffff window]
[ 0.384948] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.384985] pnp 00:01: [irq 12]
[ 0.385025] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.385048] pnp 00:02: [io 0x0060]
[ 0.385051] pnp 00:02: [io 0x0064]
[ 0.385054] pnp 00:02: [io 0x0062]
[ 0.385057] pnp 00:02: [io 0x0066]
[ 0.385068] pnp 00:02: [irq 1]
[ 0.385106] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.385128] pnp 00:03: [io 0x0070-0x0071]
[ 0.385136] pnp 00:03: [irq 8]
[ 0.385139] pnp 00:03: [io 0x0072-0x0077]
[ 0.385180] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.385205] pnp 00:04: [io 0x0061]
[ 0.385208] pnp 00:04: [io 0x0063]
[ 0.385211] pnp 00:04: [io 0x0065]
[ 0.385213] pnp 00:04: [io 0x0067]
[ 0.385252] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.385273] pnp 00:05: [io 0x0c80-0x0cff]
[ 0.385357] system 00:05: [io 0x0c80-0x0cff] could not be reserved
[ 0.385428] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.385454] pnp 00:06: [dma 4]
[ 0.385457] pnp 00:06: [io 0x0000-0x000f]
[ 0.385461] pnp 00:06: [io 0x0080-0x0085]
[ 0.385463] pnp 00:06: [io 0x0087-0x008f]
[ 0.385466] pnp 00:06: [io 0x00c0-0x00df]
[ 0.385469] pnp 00:06: [io 0x0010-0x001f]
[ 0.385472] pnp 00:06: [io 0x0090-0x0091]
[ 0.385475] pnp 00:06: [io 0x0093-0x009f]
[ 0.385516] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.385537] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.385545] pnp 00:07: [irq 13]
[ 0.385589] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.385643] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.385718] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.385789] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.385983] pnp 00:09: [io 0x0900-0x097f]
[ 0.385987] pnp 00:09: [io 0x0092]
[ 0.385990] pnp 00:09: [io 0x00b2-0x00b3]
[ 0.385993] pnp 00:09: [io 0x0020-0x0021]
[ 0.385996] pnp 00:09: [io 0x00a0-0x00a1]
[ 0.385999] pnp 00:09: [irq 0 disabled]
[ 0.386002] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.386005] pnp 00:09: [io 0x1000-0x1005]
[ 0.386008] pnp 00:09: [io 0x1008-0x100f]
[ 0.386036] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386121] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386286] system 00:09: [io 0x0900-0x097f] has been reserved
[ 0.386354] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.386423] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.386446] pnp 00:0a: [io 0xf400-0xf4fe]
[ 0.386449] pnp 00:0a: [io 0x0086]
[ 0.386452] pnp 00:0a: [io 0x1006-0x1007]
[ 0.386455] pnp 00:0a: [io 0x100a-0x1059]
[ 0.386458] pnp 00:0a: [io 0x1060-0x107f]
[ 0.386461] pnp 00:0a: [io 0x1080-0x10bf]
[ 0.386464] pnp 00:0a: [io 0x10c0-0x10df]
[ 0.386467] pnp 00:0a: [io 0x1010-0x102f]
[ 0.386470] pnp 00:0a: [io 0x0809]
[ 0.386496] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386581] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386666] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386765] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.386932] system 00:0a: [io 0xf400-0xf4fe] has been reserved
[ 0.387000] system 00:0a: [io 0x1080-0x10bf] has been reserved
[ 0.387068] system 00:0a: [io 0x10c0-0x10df] has been reserved
[ 0.387136] system 00:0a: [io 0x0809] has been reserved
[ 0.387203] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.400920] pnp 00:0b: [mem 0x00000000-0x0009efff]
[ 0.400924] pnp 00:0b: [mem 0x0009f000-0x0009ffff]
[ 0.400927] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.400931] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.400934] pnp 00:0b: [mem 0x00100000-0x3f6923ff]
[ 0.400937] pnp 00:0b: [mem 0x3f692400-0x3f6fffff]
[ 0.400940] pnp 00:0b: [mem 0x3f700000-0x3f7fffff]
[ 0.400943] pnp 00:0b: [mem 0x3f700000-0x3fefffff]
[ 0.400946] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.400949] pnp 00:0b: [mem 0xffa00000-0xffafffff]
[ 0.400952] pnp 00:0b: [mem 0xfec00000-0xfec0ffff]
[ 0.400955] pnp 00:0b: [mem 0xfee00000-0xfee0ffff]
[ 0.400958] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
[ 0.400961] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff]
[ 0.400964] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff]
[ 0.400967] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff]
[ 0.400970] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff]
[ 0.400973] pnp 00:0b: [mem 0xfed18000-0xfed1bfff]
[ 0.400976] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 0.401112] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved
[ 0.401183] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved
[ 0.401252] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.401321] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.401391] system 00:0b: [mem 0x00100000-0x3f6923ff] could not be reserved
[ 0.401460] system 00:0b: [mem 0x3f692400-0x3f6fffff] has been reserved
[ 0.401529] system 00:0b: [mem 0x3f700000-0x3f7fffff] has been reserved
[ 0.401598] system 00:0b: [mem 0x3f700000-0x3fefffff] could not be reserved
[ 0.401667] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.401736] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.401805] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.401874] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.401942] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.402011] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
[ 0.402080] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
[ 0.402148] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
[ 0.402219] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
[ 0.402289] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
[ 0.402358] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.402429] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.402514] pnp: PnP ACPI: found 12 devices
[ 0.402579] ACPI: ACPI bus type pnp unregistered
[ 0.439832] pci 0000:00:1c.5: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.439917] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.439986] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.440081] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.440151] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40400000-0x405fffff]
[ 0.440222] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
[ 0.440306] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.440376] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.440443] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.440517] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.440589] pci 0000:00:1c.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]
[ 0.440677] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.440744] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.440817] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.440889] pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.440976] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 0.441043] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.441115] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.441187] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.441274] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[ 0.441342] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.441413] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.441485] pci 0000:00:1c.5: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.441572] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.441638] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.441710] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.441781] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.441870] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.441942] pci 0000:00:1c.0: setting latency timer to 64
[ 0.441955] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.442026] pci 0000:00:1c.1: setting latency timer to 64
[ 0.442038] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.442109] pci 0000:00:1c.3: setting latency timer to 64
[ 0.442119] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.442190] pci 0000:00:1c.5: setting latency timer to 64
[ 0.442201] pci 0000:00:1e.0: setting latency timer to 64
[ 0.442207] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.442211] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.442215] pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff]
[ 0.442218] pci_bus 0000:0b: resource 1 [mem 0x40400000-0x405fffff]
[ 0.442222] pci_bus 0000:0b: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
[ 0.442226] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]
[ 0.442230] pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.442233] pci_bus 0000:0c: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.442237] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff]
[ 0.442241] pci_bus 0000:0d: resource 1 [mem 0xfe600000-0xfe7fffff]
[ 0.442245] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.442248] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.442252] pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.442256] pci_bus 0000:09: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.442260] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.442263] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.442267] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[ 0.442328] NET: Registered protocol family 2
[ 0.442487] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.442867] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.443500] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.443819] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.443888] TCP reno registered
[ 0.443951] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.444025] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.444241] NET: Registered protocol family 1
[ 0.444324] pci 0000:00:02.0: Boot video device
[ 0.444542] PCI: CLS 64 bytes, default 64
[ 0.444604] Unpacking initramfs...
[ 0.497373] Freeing initrd memory: 2152k freed
[ 0.498538] Simple Boot Flag at 0x79 set to 0x1
[ 0.498947] apm: BIOS not found.
[ 0.499191] audit: initializing netlink socket (disabled)
[ 0.499270] type=2000 audit(1311732031.496:1): initialized
[ 0.499711] highmem bounce pool size: 64 pages
[ 0.499780] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.502730] VFS: Disk quotas dquot_6.5.2
[ 0.502908] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.503131] msgmni has been set to 1737
[ 0.503467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.503585] io scheduler noop registered
[ 0.503650] io scheduler deadline registered
[ 0.503729] io scheduler cfq registered (default)
[ 0.503977] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.504049] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.504155] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.504219] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.504319] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.504383] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.504482] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.504545] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.504797] intel_idle: MWAIT substates: 0x22220
[ 0.504800] intel_idle: does not run on family 6 model 15
[ 0.504808] ERST: Table is not found!
[ 0.504887] isapnp: Scanning for PnP cards...
[ 0.861991] isapnp: No Plug & Play device found
[ 0.862125] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.064028] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.066832] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.066941] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.067133] mousedev: PS/2 mouse device common for all mice
[ 1.067295] rtc_cmos 00:03: RTC can wake from S4
[ 1.070090] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.090146] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.090247] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.090347] cpuidle: using governor ladder
[ 1.090411] cpuidle: using governor menu
[ 1.090805] TCP cubic registered
[ 1.090869] NET: Registered protocol family 17
[ 1.090940] Registering the dns_resolver key type
[ 1.091021] Using IPI No-Shortcut mode
[ 1.091192] PM: Hibernation image not present or could not be loaded.
[ 1.091199] registered taskstats version 1
[ 1.091987] rtc_cmos 00:03: setting system clock to 2011-07-27 02:00:33 UTC (1311732033)
[ 1.092123] Initializing network drop monitor service
[ 1.092277] Freeing unused kernel memory: 512k freed
[ 1.092674] Write protecting the kernel text: 3380k
[ 1.092770] Write protecting the kernel read-only data: 1028k
[ 1.107041] udevd[48]: starting version 171
[ 1.114908] Linux agpgart interface v0.103
[ 1.121178] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 1.121359] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.122127] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.122374] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.134889] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.135457] ACPI: Lid Switch [LID]
[ 1.135611] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.135702] ACPI: Power Button [PBTN]
[ 1.135836] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.135920] ACPI: Sleep Button [SBTN]
[ 1.165275] [drm] Initialized drm 1.1.0 20060810
[ 1.206851] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.206929] i915 0000:00:02.0: setting latency timer to 64
[ 1.232385] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.232394] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.232466] [drm] Driver supports precise vblank timestamp query.
[ 1.290108] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.290525] [drm] initialized overlay support
[ 1.500042] Refined TSC clocksource calibration: 1496.249 MHz.
[ 1.500113] Switching to clocksource tsc
[ 1.652818] fbcon: inteldrmfb (fb0) is primary device
[ 1.701242] Console: switching to colour frame buffer device 180x56
[ 1.708681] fb0: inteldrmfb frame buffer device
[ 1.708727] drm: registered panic notifier
[ 1.722258] acpi device:35: registered as cooling_device0
[ 1.722670] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input4
[ 1.722770] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 1.722857] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 1.723157] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.857654] SCSI subsystem initialized
[ 1.888922] libata version 3.00 loaded.
[ 1.893097] ata_piix 0000:00:1f.1: version 2.13
[ 1.893119] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.893250] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.893737] scsi0 : ata_piix
[ 1.893897] scsi1 : ata_piix
[ 1.894413] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[ 1.894485] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[ 1.894822] ata2: port disabled. ignoring.
[ 2.053718] ata1.00: ATAPI: CD-RW/DVD-ROM DW224EV, D.CF, max UDMA/33
[ 2.066932] ata1.00: configured for UDMA/33
[ 2.069600] scsi 0:0:0:0: CD-ROM TEAC CDRWDVD DW224EV D.CF PQ: 0 ANSI: 5
[ 2.078842] ahci 0000:00:1f.2: version 3.0
[ 2.078863] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.079123] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 2.079207] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 2.079291] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[ 2.079375] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.084142] scsi2 : ahci
[ 2.084346] scsi3 : ahci
[ 2.084543] scsi4 : ahci
[ 2.084859] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 45
[ 2.084935] ata4: DUMMY
[ 2.084964] ata5: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 45
[ 2.087493] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.087564] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.087898] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.403362] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.403454] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.406706] ata3.00: ATA-8: FUJITSU MHW2080BH, 0085001C, max UDMA/100
[ 2.409686] ata3.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[ 2.413635] ata3.00: configured for UDMA/100
[ 2.416701] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2080B 0085 PQ: 0 ANSI: 5
[ 2.431871] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.435016] sd 2:0:0:0: [sda] Write Protect is off
[ 2.438062] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.438092] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.481026] sda: sda1 sda2 sda3 sda4
[ 2.484500] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.080357] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.235421] udevd[242]: starting version 171
[ 6.112926] wmi: Mapper loaded
[ 6.146108] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.146113] ACPI: Thermal Zone [THM] (51 C)
[ 6.146168] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.146178] ACPI: Battery Slot [BAT0] (battery present)
[ 6.350955] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.351124] ACPI: AC Adapter [AC] (off-line)
[ 6.396340] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.644301] r592 0000:03:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 6.644566] r592: driver successfully loaded
[ 6.699202] ACPI: acpi_idle registered with cpuidle
[ 6.703690] Monitor-Mwait will be used to enter C-1 state
[ 6.704291] Monitor-Mwait will be used to enter C-2 state
[ 6.707773] Monitor-Mwait will be used to enter C-3 state
[ 6.707782] Marking TSC unstable due to TSC halts in idle
[ 6.708021] Switching to clocksource hpet
[ 6.748943] tg3.c:v3.117 (January 25, 2011)
[ 6.748973] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.748993] tg3 0000:09:00.0: setting latency timer to 64
[ 6.777884] input: Dell WMI hotkeys as /devices/virtual/input/input5
[ 6.781361] iTCO_vendor_support: vendor-support=0
[ 6.792450] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1a:a0:ff:18:0a
[ 6.792457] tg3 0000:09:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 6.792462] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 6.792467] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 6.798284] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.798408] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 6.798487] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.801214] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.806086] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.860147] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 6.864325] sdhci: Secure Digital Host Controller Interface driver
[ 6.864328] sdhci: Copyright(c) Pierre Ossman
[ 6.905947] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 6.905970] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 6.907018] _regulator_get: 0000:03:01.1 supply vmmc not found, using dummy regulator
[ 6.908074] Registered led device: mmc0::
[ 6.909131] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[ 7.025015] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 7.025072] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.028152] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 7.151001] usbcore: registered new interface driver usbfs
[ 7.151243] usbcore: registered new interface driver hub
[ 7.152609] usbcore: registered new device driver usb
[ 7.330432] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
[ 7.346790] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 7.360146] firewire_core: created device fw0: GUID 374fc00003055581, S400
[ 7.371707] cfg80211: Calling CRDA to update world regulatory domain
[ 7.580439] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.580508] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 7.580544] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 7.580549] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 7.580597] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 7.593422] ehci_hcd 0000:00:1a.7: debug port 1
[ 7.597307] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 7.597332] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 7.610090] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 7.610350] hub 1-0:1.0: USB hub found
[ 7.610357] hub 1-0:1.0: 4 ports detected
[ 7.610503] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.610534] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.610540] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.610553] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 7.620125] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.624008] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 7.624033] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 7.636706] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.636983] hub 2-0:1.0: USB hub found
[ 7.636990] hub 2-0:1.0: 6 ports detected
[ 7.652500] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.652595] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.653363] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 7.653370] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 7.653388] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 7.670218] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 7.670496] hub 3-0:1.0: USB hub found
[ 7.670503] hub 3-0:1.0: 2 ports detected
[ 7.670641] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.670654] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 7.670659] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 7.670672] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 7.676788] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 7.677040] hub 4-0:1.0: USB hub found
[ 7.677047] hub 4-0:1.0: 2 ports detected
[ 7.677185] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.677199] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.677204] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.677216] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 7.693417] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 7.693690] hub 5-0:1.0: USB hub found
[ 7.693697] hub 5-0:1.0: 2 ports detected
[ 7.693825] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.693838] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.693843] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.693855] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 7.706742] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 7.707004] hub 6-0:1.0: USB hub found
[ 7.707011] hub 6-0:1.0: 2 ports detected
[ 7.707138] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 7.707151] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.707156] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.707168] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 7.720067] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 7.720328] hub 7-0:1.0: USB hub found
[ 7.720335] hub 7-0:1.0: 2 ports detected
[ 7.725543] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 7.731070] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 7.731112] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.791352] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 7.791357] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 7.791444] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.791461] iwl3945 0000:0c:00.0: setting latency timer to 64
[ 7.884213] iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 7.884219] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 7.884373] iwl3945 0000:0c:00.0: irq 47 for MSI/MSI-X
[ 7.884664] Registered led device: phy0-led
[ 7.892327] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 8.036178] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 8.073586] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.073775] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.073882] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.476644] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 9.636841] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 9.685426] Adding 4096568k swap on /dev/sda2. Priority:-1 extents:1 across:4096568k
[ 11.639232] tg3 0000:09:00.0: irq 48 for MSI/MSI-X
[ 13.282530] tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 13.282535] tg3 0000:09:00.0: eth0: Flow control is off for TX and off for RX
[ 27.318984] NET: Registered protocol family 10
[ 38.070217] eth0: no IPv6 routers present
[ 1205.294621] chromium-sandbo (1490): /proc/1488/oom_adj is deprecated, please use /proc/1488/oom_score_adj instead.
Here is my rfkill list output:
0: dell-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: yes
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
my lsmod and lspci output is the same.
I am on an dell insprion 1420. I have also tried to disable the dell-laptop module to no avail
Last edited by n0dl (2011-07-27 14:45:25) -
Internet does not work after kernel upgrade...
I have been reading all of the other threads and have tried everything possible to downgrade my kernel to 2.6.26 rather then 2.6.27. I have found a package for kernel 2.6.26.2-1 and nvidia 173.14.12-2 but they do not mix and wont let me start x when i downgrade both of them. Is there some way i can get past this as not having internet is frustrating
Edit:
I have tried using this
echo 0 >/proc/sys/net/ipv4/tcp_sack
echo 0 >/proc/sys/net/ipv4/tcp_dsack
and it did not work, i have also tried downgrading dhcpcd and that didn't work so i'm assumin git is infact the kernel.
Edit again:
When downgrading both the kernel and nvidia with those two packages i found, my computer boots up fine up untill i get to the command line to type "startx". The i get this error message after typing "startx" :
Error: API mismatch: the nvidia kernel module has version 173.14.12, but thus nvidia driver component has version 177.80. Please make sure that the kernel module and all NVIDIA driver components have the same version.
After i got this i went and reinstall kernel 2.6.27 and the latest nvidia to look at the nvidia package i had installed. I extracted it and all the was in it was a hierarchy of folders "/lib/modules/2.6.26-ARCH/kernel/drivers/video/nvidia.ko" and that nvidia.ko file. Is it possible that i'm not installing the driver jsut a kernel module?
Once again... Edit lol:
Also i found a package for nvidia-utils and installed it with nvidia and the kernel and i can "startx", but it freezes everytime and i have to manually restart the computer with the reset button
Last edited by opeth115 (2008-10-19 22:03:56)I use nvidia96xx legacy drivers with no trouble, so I'm not sure I'll be of much help. I did read the announcment that nvidia no longer supports a certain card/cards, and there is a new legacy driver in the repo. Maybe you need to be using that one?
Also, I wasn't effected with any issues with the new kernel, but I did have a small issue with dhcpcd shortly after the kernel upgrade. It kept failing when trying to connect to the Internet. It was a simple fix though. I compared my /etc/conf.d/dhcpcd with /etc/conf.d/dhcpcd.pacnew and there was a significant difference.
I was using the string....
DHCPCD_ARGS="-N -t 30 -h $HOSTNAME"
I just needed to change it to the string in dhcpcd.pacnew....
DHCPCD_ARGS="-q -L -t 30 -h $HOSTNAME"
Anyway, sorry if this doesn't help. -
Firefox does not start after auto-upgrade
Firefox worked well until it prompted me to restart after auto upgrade to 3.6.4. No window displayed although the process list showed firefox was running. Can not resolve the problem even I uninstall and download/re-install 3.6.4.
Windows version: windows 7 enterprise 64bits
== This happened ==
Every time Firefox opened
== upgraded to 3.6.4 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)Same issue for me. I also tried to uninstall the firefox, then delete the folder in program files and reinstalled 3.6.3, 3.6.4 and 3.6.6 tried all sort of combinations I can..
Now firefox is not opening for me in both normal or safemode... :-(( -
Disp+work cannot start after kernel upgrade
Hi,
I have upgraded the kernel from 95 to 133 and when i tried to start, the dispwork is unable to. In MMC, the dispwork show "stopped"
This is Solution Manager system on Windows.
Can someone advise?
Thanks in advancesorry... here's dev_w0 :
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Fri May 30 16:16:59 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\SMA\DVEBMGS01\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\SMA\DVEBMGS01\exe\dboraslib.dll' loaded
B Version of 'F:\usr\sap\SMA\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.115)
B New connection 0 created
M sysno 01
M sid SMA
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 133
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 5696
M
M kernel runs with dp version 232(ext=109) (@(#) DPLIB-INT-VERSION-232)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5696) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 13624 (908)
M DpShMCreate: sizeof(tm_adm) 3642120 (18120)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1296)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04880040, size: 4271696)
M DpShMCreate: allocated sys_adm at 04880040
M DpShMCreate: allocated wp_adm at 04881B30
M DpShMCreate: allocated tm_adm_list at 04885068
M DpShMCreate: allocated tm_adm at 04885098
M DpShMCreate: allocated wp_ca_adm at 04BFE3A0
M DpShMCreate: allocated appc_ca_adm at 04C029F0
M DpShMCreate: allocated comm_adm at 04C04160
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 04C85010
M DpShMCreate: allocated gw_adm at 04C85050
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 04C85080
M DpShMCreate: allocated wall_adm at 04C85088
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host solman
M calling db_connect ...
C Prepending F:\usr\sap\SMA\DVEBMGS01\exe to Path.
C
C Fri May 30 16:17:00 2008
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@SMA on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 04777FA8 08F727D4 08F7205C
C Attaching to DB Server SMA (con_hdl=0,svchp=08F71FA8,srvhp=08F81954)
C
C Fri May 30 16:17:01 2008
C Starting user session (con_hdl=0,svchp=08F71FA8,srvhp=08F81954,usrhp=08FCBC78)
C Now '/@SMA' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=08F71FA8,usrhp=08FCBC78)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@SMA on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 04777FA8 08F727D4 08F7205C
C Starting user session (con_hdl=0,svchp=08F71FA8,srvhp=08F81954,usrhp=08FCBC78)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1005
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=08F71FA8,srvhp=08F81954)
C *** ERROR => CONNECT failed with sql error '1005'
[dbsloci.c 11044]
B
B Fri May 30 16:17:02 2008
B ***LOG BY2=> sql error 1005 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-01005: null password given; logon denied [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 1005 performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01005: null password given; logon denied [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10380]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server solman_SMA_01 on host solman (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Fri May 30 16:17:02 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10585
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5696) [dpnttool.c 327] -
SAP false start after kernel upgrade
Hello gurus
I've upgraded the kernel of SAP and run the command starsap and the sap starts normally. With no error messages, but when I try to logon I can't logon.
So I run the command dpmon pf=<instance_profile> and show me the error below:
DpMonInit failed - possibly no dispatcher running
DpMon: External/Internal dplib version: 102/140
The R3trans command returns 000
I also run the command cleanipc <system_number>
Does anyone know how can I solve this?
RegardsThanks for your answer.
I run saproot.sh and also cleanipc command too.
My dev_disp.new file show the errors below
[Thr 47699260272448] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 19292) [msxxserv_mt. 1746]
[Thr 47699260272448] SigISetDefaultAction : default handling for signal 17
[Thr 47699260272448] ***LOG Q0I=> NiPGetServByName2: service 'sapmsTRN' not found: getservbyname_r [niuxi_mt.c 579]
[Thr 47699260272448] *** ERROR => MsSCommInit: NiBufListen(sapmsTRN) (rc=NIESERV_UNKNOWN) [msxxserv_mt. 9180]
[Thr 47699260272448] *** ERROR => MsSInit: MsSCommInit [msxxserv_mt. 1769]
[Thr 47699260272448] *** ERROR => MsSInit failed, see dev_ms.new for details
[msxxserv_mt. 5639]
[Thr 47699260272448] ***LOG Q02=> MsSHalt, MSStop (Msg Server 19292) [msxxserv_mt. 5700]
also file dev_ms.new
trc file: "dev_ms.new", trc level: 1, release: "640"
[Thr 47699260272448] Fri Feb 17 12:05:19 2012
[Thr 47699260272448] ms/http_max_clients = 500 -> 500
[Thr 47699260272448] MsSSetTrcLog: trc logging not active
[Thr 47699260272448] NiInit2: NI already initialized; param 'maxHandles' ignored
systemid 390 (AMD/Intel x86_64 with Linux)
relno 6400
patchlevel 0
patchno 378
intno 20020600
make: multithreaded, ASCII, 64 bit
pid 19292
[Thr 47699260272448] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 19292) [msxxserv_mt. 1746]
[Thr 47699260272448] SigISetDefaultAction : default handling for signal 17
[Thr 47699260272448] ***LOG Q0I=> NiPGetServByName2: service 'sapmsTRN' not found: getservbyname_r [niuxi_mt.c 579]
[Thr 47699260272448] *** ERROR => MsSCommInit: NiBufListen(sapmsTRN) (rc=NIESERV_UNKNOWN) [msxxserv_mt. 9180]
[Thr 47699260272448] *** ERROR => MsSInit: MsSCommInit [msxxserv_mt. 1769]
[Thr 47699260272448] *** ERROR => MsSInit failed, see dev_ms.new for details
[msxxserv_mt. 5639]
[Thr 47699260272448] ***LOG Q02=> MsSHalt, MSStop (Msg Server 19292) [msxxserv_mt. 5700] -
[SOLVED] Gnome 3 won't start after kernel upgrade
I have upgraded to kernel 3.0, and now I am getting the following error when I try to start gdm:
** (gdm-binary:936): WARNING **: Failed to acquire org.gnome.DisplayManager
** (gdm0binary:936): WARNING **: Could not acquire name: bailing out
Can anybody explain what the deal is?
Last edited by spiritwalker (2011-08-17 16:50:44)theseus, thank you for the reply. I thought you can only start gnome using some kind of display manager. If I understood you correctly, I did 'telinit 5' and then 'startx' with the folowing results:
INIT: Switching to runlevel: 5
INIT: cannot execute "/usr/bin/xdm" <---- This line repeats 10 times
INIT: ID "x" respawning too fast: disabled for 5 minutes
But when I did 'who -r' I got this:
run-level 5 2011-08-16 02:26 last = 4
So I tried to start X wich resulted in the following:
http://i.imgur.com/yydcd.png
http://i.imgur.com/RNapr.png
http://i.imgur.com/NnFaM.png
Also, arch is installed in a virtual box, so I didn't install any video drivers like nvidia.
Thanks
Moderator edit:
spiritwalker, please do not post pictures of this large size: https://wiki.archlinux.org/index.php/Fo … s_and_Code
In this specific case you could have made use the log files in /var/log and posted the relevant info in [ code ] tags.
Besides, this way you will get used to work with logs, which is mandatory in Arch, imo.
Last edited by bernarcher (2011-08-17 13:33:28) -
Weblogic Managed server not starting after installing OIM 11g
Hi All,
I have installed OIM 11g successfully and I am able to start the WL Admin Server. But when I try to start the Managed Server for OIM (oim_server1), the screen just disappears and do not generate any logs.
I haven't used the WL JDK while installing, used seperate JDK. Does it create any problem in starting the managed Server.
Please help in solving this..
Thanks,
anagHi,
How are you starting the managed server, is it like this?
xlStartManagedServer.cmd oim_server1 <URL of admin server>
~ Ketan
Maybe you are looking for
-
Can there be more than one icloud account on a computer? I have an icloud account with my iphone but would like to view my photo stream on my husbands mac. I do not have a mac but an older PC. thanks
-
"You are not connected to the internet" but I am!
solved by using the search function.... https://discussions.apple.com/message/15684542#15684542 Sorry for posting too early.
-
Good Afternoom, I have a question. I created a view and i need concat one collumn. Example: create view teste as select c1 || c2 || c3 as tp from table. The C1 is varchar2(3), c2 is varchar2(5) and c3 is varchar2(1) total varchar2(9)... right??? But
-
Why are my text layers turning to jibberish?
I'll try to explain everything the first time around. Adobe CC 12.2.1.5 Mid 2011 27 in IMac 2.7 GHz Intel i5 processor 8 GB 1333MHz DDR3 RAM Mac OS X Lion 10.7.5 I have Comp that is a duplicate of another Comp that I added about 20 text layers too. I
-
6i Template.fmb Progress Bar and Inv Org LOV
I am building a custom form for use with Oracle Apps. I have two problems: 1. The progress indicator canvas appears after the window is closed. I do not know what is calling it or how to prevent it from poping up. 2. I would like to use the INVSTAND