Session Context Variable and Order by clause

Hi All,
Im using Oracle 11g R2.
Is it somehow possible to use Context variable (to store column name) in ORDER BY clause? My ultimate aim is to construct Order by at runtime without using concatenation.
e.g. i created context as my_ctx for some pkg and its variable as v_ctx having value set as "TABLE_NAME"
so is it possible to use it as
select * from all_tables
order by sys_context('my_ctx', 'v_ctx');
if no, is there any work around??
Thanks,
Vivek

its better to post here
Oracle Discussion Forums » Oracle Database » SQL and PL/SQL

Similar Messages

How to use left outer joins ,right outer joins and order by clause for belo

Hi,
How to use left outer joins ,right outer joins and order by clause for below XML query.
The query which is red colour returns null then its not displaying any values for columns in that tables. Tried decode, nvl function hasn't worked.
SELECT XMLAGG ( XMLELEMENT( "P", XMLFOREST( P.process_id AS Ppid,
          (SELECT XMLAGG( XMLELEMENT( "PI", XMLFOREST( PI.question_id AS PIqid,
                                   PI.process_id AS PIpid,
PI.innertext AS
                                   PItext, PI.itemtype AS PItype,
                                   PI.linkfrom AS PIfrom,
                                   PI.linkto AS PIto,
PI.associated AS PIas,
                                   PI.content_id AS PIc,
                                   PI.exitpoint1_id AS PIe1,
                                   PI.exitpoint2_id AS PIe2,
                                   PI.exitpoint3_id AS PIe3,
                                   PI.followoncall AS PIfoc,
PI.userinput AS PIui,
                                   PI.resolveidentifier AS PIri,
PI.libquestion_idfk AS PIlqid,
                                   PI.isLocked AS PIstls,
                                   PI.PreviousAnswer AS PIPAns,
                                   PI.VisibleToAgent AS PIVAgent,
                                   PI.RetryAttempt AS PIRetry,
                                   PI.Tags AS PITag,
                              SELECT XMLAGG( XMLELEMENT( "PO", XMLFOREST( PO.option_id AS POoid,
                                   PO.question_id AS POqid,
                                                       PO.process_id AS popid,
                                                       PO.opt_innertext AS POtext,
                                                       PO.opt_linkfrom AS POfrom,
                                                       PO.opt_linkto AS POto,
                                                       PO.libquestion_idfk AS POlqid,
                                                       PO.liboption_idfk AS POloid ) ) )
                              FROM vw_liveProcessOption_Sim_v6 PO
                                   WHERE PI.question_id = PO.question_id (+)
                              AND PI.process_id = PO.process_id (+)
                              ) "A" ) ) ) AS "PO"
     FROM vw_liveProcessItem_Sim_v6 PI
          WHERE P.process_id = PI.process_id
          ) "A" ) ) ) AS "PI"
FROM liveProcess_ec P
WHERE (P.process_id = 450)
Any help really appreciated.
Thanks

user512743 wrote:
Hi,
Here below is the scripts of tables, insert statements and Required output.
CREATE TABLE VW_LIVEPROCESSOPTION_SIM_v6
(     "OPTION_ID" NUMBER,
     "QUESTION_ID" NUMBER(10,0),
     "PROCESS_ID" NUMBER(10,0),
     "OPT_INNERTEXT" VARCHAR2(200 CHAR),
     "OPT_LINKFROM" VARCHAR2(20 CHAR),
     "OPT_LINKTO" VARCHAR2(20 CHAR),
     "LIBQUESTION_IDFK" NUMBER,
     "LIBOPTION_IDFK" NUMBER
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,2,450,'Yes',null,'5',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,3,450,'Yes',null,'5',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,5,450,'Yes',null,'6',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,6,450,'Yes',null,'7',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,8,450,'Block All',null,'9',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,9,450,'Yes',null,'10',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,11,450,'Yes',null,'12',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,12,450,'Yes',null,'13',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,14,450,'Yes',null,'16',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,2,450,'No',null,'3',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,3,450,'No',null,'4',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,5,450,'No',null,'8',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,6,450,'No',null,'8',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,8,450,'Standard',null,'11',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,9,450,'No',null,'11',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,11,450,'No',null,'14',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,12,450,'No',null,'14',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,14,450,'No',null,'15',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (3,8,450,'Disabled',null,'12',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (4,8,450,'User Defined',null,'12',null,null);
REATE TABLE "VW_LIVEPROCESSITEM_SIM_v6"
(     "QUESTION_ID" NUMBER(10,0),
     "PROCESS_ID" NUMBER(10,0),
     "INNERTEXT" VARCHAR2(200 CHAR),
     "ITEMTYPE" VARCHAR2(50 CHAR),
     "LINKFROM" VARCHAR2(500 CHAR),
     "LINKTO" VARCHAR2(500 CHAR),
     "ASSOCIATED" VARCHAR2(200 CHAR),
     "CONTENT_ID" NUMBER,
     "EXITPOINT1_ID" NUMBER(10,0),
     "EXITPOINT2_ID" NUMBER(10,0),
     "EXITPOINT3_ID" NUMBER(10,0),
     "RESOLVEIDENTIFIER" VARCHAR2(40 CHAR),
     "LIBQUESTION_IDFK" NUMBER(10,0),
     "FOLLOWONCALL" NUMBER(1,0),
     "USERINPUT" VARCHAR2(200 CHAR),
     "ISLOCKED" NUMBER(1,0),
     "PREVIOUSANSWER" NUMBER(1,0),
     "VISIBLETOAGENT" NUMBER(1,0),
     "RETRYATTEMPT" NUMBER(10,0),
     "TAGS" VARCHAR2(50 BYTE)
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (1,450,'CBB1015 - Router Firewall Settinngs Process','Title',null,'2',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (2,450,'Is the customers PC Firewall turned off?','Question','1','2.2,2.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (3,450,'Advise the customer to turn off the PC Firewall in order to continue. Has this been done?','Question','2.2','3.2,3.1',null,278,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (4,450,'Advise the customer the PC Firewall must be switched off before this process????','ExitPoint','3.2',null,null,null,14,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (5,450,'Is the customer able to access the internet now?','Question','3.1,2.1','5.2,5.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (6,450,'Is the customer having a problem with a specific website?','Question','5.1','6.2,6.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (7,450,'1536: CBB1008 - Browser Setup and Daignostics','SubProcess','6.1',null,'1536-1-0',null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (8,450,'What is the security level on the CPE Management page?','Question','6.2,5.2','8.4,8.3,8.2,8.1',null,279,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (9,450,'Change the security level to Standard. Does this resolve the customers issue?','Question','8.1','9.2,9.1',null,280,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (10,450,'Issue Resolved','ExitPoint','9.1',null,null,null,1,6,122,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (11,450,'Change the security level to Disabled. Is the customer able to browse the internet?','Question','9.2,8.2','11.2,11.1',null,281,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (12,450,'Change the security level to Standard. Is the customer able to browse the internet now?','Question','11.1,8.3,8.4','12.2,12.1',null,283,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (13,450,'Issue Resolved','ExitPoint','12.1',null,null,null,1,6,123,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (14,450,'Ask the customer to perform a master reset. Does this resolve their issue?','Question','12.2,11.2','14.2,14.1',null,282,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (15,450,'Faulty CPE','ExitPoint','14.2',null,null,null,1,6,124,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (16,450,'Issue Resolved','ExitPoint','14.1',null,null,null,1,6,123,null,null,null,null,null,null,null,null,null);
CREATE TABLE "LIVEPROCESS_EC_V"
(     "PROCESS_ID" NUMBER(10,0),
     "USER_ID" NUMBER(10,0),
     "CREATED" TIMESTAMP (6)
Insert into LIVEPROCESS_EC (PROCESS_ID,USER_ID,CREATED) values (450,7460,to_timestamp('21-APR-08 09.34.41.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'));
Required O/P in XML format
<P>
<Ppid>450</Ppid>
<PI>
<PIqid>1</PIqid>
<PIpid>450</PIpid>
<PItext>CBB1015 - Router Firewall Settinngs Process</PItext>
<PItype>Title</PItype>
<PIto>2</PIto>
<PO />
</PI>
<PI>
<PIqid>2</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customers PC Firewall turned off?</PItext>
<PItype>Question</PItype>
<PIfrom>1</PIfrom>
<PIto>2.2,2.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>2</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>5</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>2</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>3</POto>
</PO>
</PI>
<PI>
<PIqid>3</PIqid>
<PIpid>450</PIpid>
<PItext>Advise the customer to turn off the PC Firewall in order to continue. Has this been done?</PItext>
<PItype>Question</PItype>
<PIfrom>2.2</PIfrom>
<PIto>3.2,3.1</PIto>
<PIc>278</PIc>
<PO>
<POoid>1</POoid>
<POqid>3</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>5</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>3</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>4</POto>
</PO>
</PI>
<PI>
<PIqid>4</PIqid>
<PIpid>450</PIpid>
<PItext>Advise the customer the PC Firewall must be switched off before this process????</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>3.2</PIfrom>
<PIe1>14</PIe1>
<PO />
</PI>
<PI>
<PIqid>5</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customer able to access the internet now?</PItext>
<PItype>Question</PItype>
<PIfrom>3.1,2.1</PIfrom>
<PIto>5.2,5.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>5</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>6</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>5</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>8</POto>
</PO>
</PI>
<PI>
<PIqid>6</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customer having a problem with a specific website?</PItext>
<PItype>Question</PItype>
<PIfrom>5.1</PIfrom>
<PIto>6.2,6.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>6</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>7</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>6</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>8</POto>
</PO>
</PI>
<PI>
<PIqid>7</PIqid>
<PIpid>450</PIpid>
<PItext>1536: CBB1008 - Browser Setup and Daignostics</PItext>
<PItype>SubProcess</PItype>
<PIfrom>6.1</PIfrom>
<PIas>1536-1-0</PIas>
<PO />
</PI>
<PI>
<PIqid>8</PIqid>
<PIpid>450</PIpid>
<PItext>What is the security level on the CPE Management page?</PItext>
<PItype>Question</PItype>
<PIfrom>6.2,5.2</PIfrom>
<PIto>8.4,8.3,8.2,8.1</PIto>
<PIc>279</PIc>
<PO>
<POoid>1</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Block All</POtext>
<POto>9</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Standard</POtext>
<POto>11</POto>
</PO>
<PO>
<POoid>3</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Disabled</POtext>
<POto>12</POto>
</PO>
<PO>
<POoid>4</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>User Defined</POtext>
<POto>12</POto>
</PO>
</PI>
<PI>
<PIqid>9</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Standard. Does this resolve the customers issue?</PItext>
<PItype>Question</PItype>
<PIfrom>8.1</PIfrom>
<PIto>9.2,9.1</PIto>
<PIc>280</PIc>
<PO>
<POoid>1</POoid>
<POqid>9</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>10</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>9</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>11</POto>
</PO>
</PI>
<PI>
<PIqid>10</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>9.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>122</PIe3>
<PO />
</PI>
<PI>
<PIqid>11</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Disabled. Is the customer able to browse the internet?</PItext>
<PItype>Question</PItype>
<PIfrom>9.2,8.2</PIfrom>
<PIto>11.2,11.1</PIto>
<PIc>281</PIc>
<PO>
<POoid>1</POoid>
<POqid>11</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>12</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>11</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>14</POto>
</PO>
</PI>
<PI>
<PIqid>12</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Standard. Is the customer able to browse the internet now?</PItext>
<PItype>Question</PItype>
<PIfrom>11.1,8.3,8.4</PIfrom>
<PIto>12.2,12.1</PIto>
<PIc>283</PIc>
<PO>
<POoid>1</POoid>
<POqid>12</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>13</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>12</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>14</POto>
</PO>
</PI>
<PI>
<PIqid>13</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>12.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>123</PIe3>
<PO />
</PI>
<PI>
<PIqid>14</PIqid>
<PIpid>450</PIpid>
<PItext>Ask the customer to perform a master reset. Does this resolve their issue?</PItext>
<PItype>Question</PItype>
<PIfrom>12.2,11.2</PIfrom>
<PIto>14.2,14.1</PIto>
<PIc>282</PIc>
<PO>
<POoid>1</POoid>
<POqid>14</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>16</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>14</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>15</POto>
</PO>
</PI>
<PI>
<PIqid>15</PIqid>
<PIpid>450</PIpid>
<PItext>Faulty CPE</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>14.2</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>124</PIe3>
<PO />
</PI>
<PI>
<PIqid>16</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>14.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>123</PIe3>
<PO />
</PI>
</P>
Thanks in advance
Edited by: user512743 on Nov 18, 2008 4:46 AM

Group by and order by clause

Hi,
I have wriiten the below query and i am using group by and order by clause....but i am not getting the required result
SELECT b.ACCOUNT_REGION,CASE WHEN b.product_reference_status='Reference' THEN 'Recruited' WHEN b.product_reference_status in ('Inactive','Declined') THEN 'Inactive' WHEN b.product_reference_status ='Nominate' THEN 'Inprogress' ELSE 'Other' END product_reference_status, COUNT(decode(b.product_quarter,'Q1FY09',b.REFERENCE_ID)) Q1FY09, COUNT(decode(b.product_quarter,'Q2FY09',b.REFERENCE_ID)) Q2FY09, COUNT(decode(b.product_quarter,'Q3FY09',b.REFERENCE_ID)) Q3FY09, COUNT(decode(b.product_quarter,'Q4FY09',b.REFERENCE_ID)) Q4FY09, COUNT(decode(b.product_quarter,'Q1FY10',b.REFERENCE_ID)) Q1FY10, COUNT(decode(b.product_quarter,'Q2FY10',b.REFERENCE_ID)) Q2FY10, COUNT(decode(b.product_quarter,'Q3FY10',b.REFERENCE_ID)) Q3FY10, COUNT(decode(b.product_quarter,'Q4FY10',b.REFERENCE_ID)) Q4FY10, COUNT(b.product_quarter) Total
FROM refdump a, ref_dh_pr b
WHERE A.REFERENCE_ID=b.REFERENCE_ID AND (b.CREATED_ON - NVL(a.REFERENCE_DATE,a.CREATED))>15 group by b.account_region,product_reference_status order by 2
output is as given below
Region Status Count
LAD     Inactive     0
EMEA     Inactive     21
*APAC     Inactive     2
*APAC     Inactive     1
EMEA     Inactive     2
EMEA     Inprogress     220
LAD     Inprogress     19
LAD     Other     2
LAD     Other     0
LAD     Other     5
LAD     Recruited     182
APAC     Recruited     191
My question is
1) Why i am geeting two APAC regions and 3 LAD (marked *) regions when i have grouped by region and status
2) How can i make the status in the following order
a) Recruited
b)Inprogress
c)Inactive
d)Other
Thanks,

<i>group by b.account_region,product_reference_status</i>
Just take all the columns in the group by clause in your select segment and run the SQL, you'll come to know abt the different values in columns which group together.
*009*

Exception caused by bind variables in ORDER BY clause and VO RANGE_PAGING

Hi,
I'm using a ViewObject in RANGE_PAGING mode and discovered a problem when using bind variables in the ORDER BY clause of my statement:
SELECT * FROM (SELECT /*+ FIRST_ROWS */ IQ.*, ROWNUM AS Z_R_N FROM (
SELECT * FROM T_TABLE WHERE (attr1 = :1) ORDER BY decode (attr2, :2, 1, null, 0, -1) desc, attr3 ) IQ
WHERE ROWNUM < :2) WHERE Z_R_N > :3 When a bind variable is used in the ORDER BY CLAUSE and the method VO.getEstimatedRowCount() is call then the DB issued an SQL error:
java.sql.SQLException: Ungültiger Spaltenindex (eng.: invalid column index)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:239)
     at oracle.jdbc.driver.OraclePreparedStatement.setStringInternal(OraclePreparedStatement.java:4612)The numbering of the bind variables indicates that the last two bind variables have the wrong numbering (??)
When I rewrite the SQL into the following statement, the SQL error does not occur but I have not verified yet that the VO delivers the correct range of data because the numbering of the bind variables is not correct.
SELECT * FROM (SELECT /*+ FIRST_ROWS */ IQ.*, ROWNUM AS Z_R_N FROM (
SELECT *, decode (attr2, :1, 1, null, 0, -1) as ATTR_FOR_SORTING FROM T_TABLE WHERE (attr1 = :2) ORDER BY ATTR_FOR_SORTING desc, attr3 ) IQ
WHERE ROWNUM < :2) WHERE Z_R_N > :3I'm working with JDev 10.1.2 and Oracle DB 9203.
Any comments are welcome!
Thanks,
Markus

You are using the bind variable :2 twice. Did you try
SELECT * FROM (SELECT /*+ FIRST_ROWS */ IQ.*, ROWNUM AS Z_R_N FROM (
SELECT * FROM T_TABLE WHERE (attr1 = :1) ORDER BY decode (attr2, :2, 1, null, 0, -1) desc, attr3 ) IQ
WHERE ROWNUM < :4) WHERE Z_R_N > :3
setWhereClauseParm(0, "a"); // :1
setWhereClauseParm(1, "b"); // :2
setWhereClauseParm(2, "c"); // :3
setWhereClauseParm(3, "b"); // :2setting the fourth parameter the same as the second one?
I remeber reading something about using bind variables twice causing problems, but I#m not sure about it.

Sys_context and Order by clause

Hi All,
Im using Oracle 11g R2.
Is it somehow possible to use Context variable (to store column name) in ORDER BY clause? My ultimate aim is to construct Order by at runtime without using concatenation.
e.g. i created context as my_ctx for some pkg and its variable as v_ctx having value set as "TABLE_NAME"
so is it possible to use it as
select * from all_tables
order by sys_context('my_ctx', 'v_ctx');
if no, is there any work around??
Thanks,
Vivek

Hi, Vivek,
Vivek wrote:
Hi All,
Im using Oracle 11g R2.
Is it somehow possible to use Context variable (to store column name) in ORDER BY clause? My ultimate aim is to construct Order by at runtime without using concatenation.Sure, you can use SYS_CONTEXT in an ORDER BY clause, but it's unclear what you're trying to do, so I don't know if SYS_CONTEXT will help you.
e.g. i created context as my_ctx for some pkg and its variable as v_ctx having value set as "TABLE_NAME"
so is it possible to use it as
select * from all_tables
order by sys_context('my_ctx', 'v_ctx');
if no, is there any work around??Post a complete test script hat people can run to re-create the problem and test their ideas. Show the output you want from the parameters an data you give.
Think about using a CASE expression in the ORDER BY clause. You can use SYS_CONTEXT in the CASE expression if you want to.

PreparedStatement and order by clause

Hi all,
I'm having a strange problem, when I try to use a preparedStatement which has a parameter in the order by clause the query ignores the order by clause and returns the data in the default table order.
I'm trying to allow the enduser the ability to sort the results in any way they like.
a sample of code is:
javax.sql.DataSource dataSource;
java.sql.Connection myConnection = null;
String sort_order = null;
sort_order = request.getParameter("sort_order");
if(sort_order == null) {
sort_order = "start_date, hostname";
String sql = (String)Tokens.getInstance().getSQLProps().get(Tokens.FIND_SCHED);
try {
dataSource = getDataSource(request);
myConnection = dataSource.getConnection();
PreparedStatement pstmt = myConnection.prepareStatement(sql);
pstmt.setString(1, (Tokens.getInstance().getProps().getProperty(Tokens.CURRENT)));
pstmt.setString(2, sort_order);
ResultSet rset = pstmt.executeQuery();
thanks for any help you can provide

You cannot use bind variables for column names. In this case, what you are telling Oracle to do is to sort by the literal string 'start_date, hostname', which (since the literal string is the same for every row) has no effect. If you want Oracle to sort by the values in those columns, you would have to have different versions of the query depending on the ORDER BY clause. In this case, you would probably want to append the ORDER BY clause to your base SQL statement rather than trying to pass the ORDER BY clause in as a bind variable.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Materialized view and Order by clause

Hi all. I'd like to have some information regarding the order by clause used in a materialized view.
I'm using Oracle 9.2 and Win2003 server. I have a common view (my_common_view) on which a materialized view is based (my_materialized_view). Materialized view is built for fast refresh and is created in this way:
create materialized view my_materialized_view as
select * from my_common_view
order by 1,2,3;
My question is: if I query this materialized view without adding an order by clause in the statement, I will obtain always an ordered result set? So, is it useful to include the order by clause in the materialized view script or the order by has to be include in the statement used for quering the materialized view (for example like this: select * from my_materialized view order by ...)?
Thank you very much.
Ste.

SQL> create table t
2 (x int)
3 /
Table created.
SQL> create view vw
2 as
3 select *
4    from t
5   order by x
6 /
View created.
SQL> select *
2    from v$version
3 /
BANNER
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
PL/SQL Release 9.2.0.7.0 - Production
CORE    9.2.0.7.0       Production
TNS for IBM/AIX RISC System/6000: Version 9.2.0.7.0 - Production
NLSRTL Version 9.2.0.7.0 - Production
SQL>

Derived tables and Order by clause

Hi,
I have a query that looks as below.
The execution time of the query (10 sec) is fine when order by clause is removed from the query. But with order by clause, the execution time is 40 times more(400 sec). How to optimize this query so that it will execute within a minute, with ORDER BY clause included?
select X.a1, X.a2, X.a3, X.a4, Y.b1, Y.b2, Y.b3
from (select A.a1 a1, A.a2 a2, A.a3 a3, A.a4 a4
from A_table A
where A.a1 = 'something') X,
(select B.b1 b1, B.b2 b2, B.b3 b3
from B_table B
where B.b1 = 'some') Y
where
X.a1 = Y.a1 (+) AND (some other conditions)
order by X.a1, X.a2, Y.b1, Y.b2, X.a3, X.a4
thanks in advance,
Venkat

You do need the inline view Y if you are outer joining it because you must apply the
where B.b1 = 'some'
condition first.
However, the inline view X is not needed. Still, I'm not sure that getting rid of it is going to improve performance. Try it and see.
Incidentally, the outer join condition
where X.a1 = Y.a1 (+)
refers to Y.a1, but the inline view Y has no column named a1. Did you mean Y.b1?
What are the "some other conditions"? Do any of them involve the inline view Y alone (that is, are not join conditions)? If so, it may be that either: a) you don't need an outer join, or, b) those conditions should be moved into the inline view Y. In either case, this may improve performance.
Are you sure the execution time without the order by clause is really 10 seconds? Or, is that just the elapsed time to return the first row? With the order by clause, Oracle must identify all the rows before it can return the first row.

Session scope variables and weird behaviour of AdfContext()

Hello,
what is the best method and correct API to create a session scope variable?
I am currently using ADFContext().getCurrent().getSessionScope().get()/put(), but it looks like it has some problems: for some unkown reasons I loose the variable, that is get() returns null when called from a method of a (overridden)ViewRowImpl. Why does this happen?
Thanks you in advance

There are a couple of ways you can set values on a sessions scope but I would have to question if you really need a scope as high as session to accomplish what you want to do. At any rate, you should be able to store the value using the method you described but you could also try setting it using EL by using the setExpressionValue and resolveExpression methods in JSFUtils.java (you can find this in the latest fusion demo application). JSFUtils also has a getFromSession and storeOnSession that you could try.
With all that said I don't think it is good practice to access scope variables from your model layer. You should write your method in the ViewRowImpl class to accept the value as a method parameter and then pass the value in through the binding layer or when invoking the method from your bean class.

3 Table Join with group by and order by clauses

I am porting from MySQL to Oracle 8i. I have a three Table Join in MySQL as follows:
select distinct TO_DAYS(l.listend)-TO_DAYS(NOW()) AS daysLeft, i.minbid, l.listend, i.itemid, i.itemtitle, l.listingid, l.lendstart, l.lendend, l.status, MAX(b.amount) AS curBid, COUNT(b.amount) AS numBids from TBL_ITEMS i, TBL_LISTING l LEFT JOIN TBL_BIDS b ON l.listingid=b.listingid where i.itemid = l.itemid AND l.status='1' AND (TO_DAYS(l.listend)-TO_DAYS(NOW()) >= 0) AND i.catcode LIKE'12__' GROUP BY listingid order by curBid DESC, daysLeft;
It performs an straight join on the first 2 tables (TBL_ITEMS and TBL_LISTING) and a LEFT JOIN between the previous result set and TBL_BIDS. TBL_BIDS uses a group by clause to obtain MAX and COUNT info. This final result set is the sorted (ORDER BY).
I have tried to reconstruct this type of call in Oracle and have failed. Several problems that I have notices: Oracle does not let me pull in additional columns when doing a GROUP BY clause.
(see below for my work around)
I have worked around the problem by creating a TABLE with the group by functionality and doing a straing 3 table join. (NOTE: I cannot create a view because use a LIKE function in the call... view dont have indexes). However, when I try to alias the column that returns DATE subtraction ("l.listend-TRUNC(SYSDATE) daysLeft" OR "l.listend-TRUNC(SYSDATE) dayLeft") I cannot use the LIKE statement.
Here is my question. How do I port the above 3-table MySQL call to Oracle. Why am I having these problems (is it the Oracle optimizer?) and how do I avaopid them in the future.
I really appreciate anyone's input. Thanks,
Inder
WORK AROUND:
FIRST STEP:
"create TABLE BIDSUM as
select l.listingid, COUNT(b.amount) numBids, MAX(b.amount) curBid from TBL_LISTING l, TBL_BIDS b where l.listingid=b.listingid(+) group by (l.listingid);"
NEXT STEP:
select i.minbid, i.itemtitle, l.lendstart-TRUNC(SYSDATE), l.lendend, l.listingid, l.status, s.numbids, s.curbid from TBL_ITEMS i, TBL_LISTING l, BIDSUM s where l.listingid=s.listingid AND i.itemid=l.itemid AND l.status='1' AND i.catcode LIKE '12%';
THIS ALSO WORKS (no LIKE):
"select i.minbid, i.itemtitle, l.lendstart-TRUNC(SYSDATE) daysLeft, l.lendend, l.listingid, l.status, s.numbids, s.curbid from TBL_ITEMS i, TBL_LISTING l, BIDSUM s where l.listingid=s.listingid AND i.itemid=l.itemid AND l.status='1' AND i.catcode='12'";
BUT THIS DOES NOT (alias the DATE arimetic)
select i.minbid, i.itemtitle, l.lendstart-TRUNC(SYSDATE) daysLeft, l.lendend, l.listingid, l.status, s.numbids, s.curbid from TBL_ITEMS i, TBL_LISTING l, BIDSUM s where l.listingid=s.listingid AND i.itemid=l.itemid AND l.status='1' AND i.catcode LIKE '12__';

I am porting from MySQL to Oracle 8i. I have a three Table Join in MySQL as follows:
select distinct TO_DAYS(l.listend)-TO_DAYS(NOW()) AS daysLeft, i.minbid, l.listend, i.itemid, i.itemtitle, l.listingid, l.lendstart, l.lendend, l.status, MAX(b.amount) AS curBid, COUNT(b.amount) AS numBids from TBL_ITEMS i, TBL_LISTING l LEFT JOIN TBL_BIDS b ON l.listingid=b.listingid where i.itemid = l.itemid AND l.status='1' AND (TO_DAYS(l.listend)-TO_DAYS(NOW()) >= 0) AND i.catcode LIKE'12__' GROUP BY listingid order by curBid DESC, daysLeft;
It performs an straight join on the first 2 tables (TBL_ITEMS and TBL_LISTING) and a LEFT JOIN between the previous result set and TBL_BIDS. TBL_BIDS uses a group by clause to obtain MAX and COUNT info. This final result set is the sorted (ORDER BY).
I have tried to reconstruct this type of call in Oracle and have failed. Several problems that I have notices: Oracle does not let me pull in additional columns when doing a GROUP BY clause.
(see below for my work around)
I have worked around the problem by creating a TABLE with the group by functionality and doing a straing 3 table join. (NOTE: I cannot create a view because use a LIKE function in the call... view dont have indexes). However, when I try to alias the column that returns DATE subtraction ("l.listend-TRUNC(SYSDATE) daysLeft" OR "l.listend-TRUNC(SYSDATE) dayLeft") I cannot use the LIKE statement.
Here is my question. How do I port the above 3-table MySQL call to Oracle. Why am I having these problems (is it the Oracle optimizer?) and how do I avaopid them in the future.
I really appreciate anyone's input. Thanks,
Inder
WORK AROUND:
FIRST STEP:
"create TABLE BIDSUM as
select l.listingid, COUNT(b.amount) numBids, MAX(b.amount) curBid from TBL_LISTING l, TBL_BIDS b where l.listingid=b.listingid(+) group by (l.listingid);"
NEXT STEP:
select i.minbid, i.itemtitle, l.lendstart-TRUNC(SYSDATE), l.lendend, l.listingid, l.status, s.numbids, s.curbid from TBL_ITEMS i, TBL_LISTING l, BIDSUM s where l.listingid=s.listingid AND i.itemid=l.itemid AND l.status='1' AND i.catcode LIKE '12%';
THIS ALSO WORKS (no LIKE):
"select i.minbid, i.itemtitle, l.lendstart-TRUNC(SYSDATE) daysLeft, l.lendend, l.listingid, l.status, s.numbids, s.curbid from TBL_ITEMS i, TBL_LISTING l, BIDSUM s where l.listingid=s.listingid AND i.itemid=l.itemid AND l.status='1' AND i.catcode='12'";
BUT THIS DOES NOT (alias the DATE arimetic)
select i.minbid, i.itemtitle, l.lendstart-TRUNC(SYSDATE) daysLeft, l.lendend, l.listingid, l.status, s.numbids, s.curbid from TBL_ITEMS i, TBL_LISTING l, BIDSUM s where l.listingid=s.listingid AND i.itemid=l.itemid AND l.status='1' AND i.catcode LIKE '12__';

Cascading LOV - and order by clause?

Hi, I have a collection that makes use of cascading lovs.
The cascading lov works properly, but I would like the return values sorted alphabetically and cannot figure out why they are not. If I run the query in SQL, it runs perfectly.
My query is:
select......
apex_item.select_list_from_query_xl(15,c015,'select port_name, port
from valid_ports
where state = '
||nvl(c014,0)
*||'order by port_name',*
'style="width:150px;background-color:#FBEC5D;"',
'YES',
'0',
'- Select PORT -',
'f15_' || LPAD (seq_id, 4, '0'),
NULL,
'NO' ) PORT,
c014 is a state code. Order by port_name.
any thoughts? thanks

Hi Varad, thanks for your response. It is the child...here is the full query, it may make more sense.
thanks again!
Karen
{select apex_item.hidden (1,seq_id) checkbox,
apex_item.hidden (2,seq_id)||
        *apex_item.select_list_from_query(3,c003,'select partner_name d, state_code r*
                                                  *from   partners*
                                                  *where state_code is not null*
                                                  *order by partner_name',*
                           *'style="width:100px;background-color:#FBEC5D; "'*
                            *||'onchange="f_set_casc_sel_list_item_port(this,f4_'||LPAD (seq_id, 4,'0')||')"',*
                             *'YES',*
                                *'0',*
                                *'- Select State -',*
                                *'f3_' || LPAD (seq_id,4, '0'),*
                                *NULL,*
                                *'NO'*
                               *) STATE,*
           *apex_item.select_list_from_query_xl(4,c004,'select port_name, port*
                                                    *from   valid_ports*
                                                    *where fips_state = '*
                                                    *||nvl(c003,0)*
                                                    *||' order by port_name',*
                                         *'style="width:150px;background-color:#FBEC5D;"',*
                                         *'YES',*
                                         *'0',*
                                         *'- Select PORT -',*
                                         *'f4_' || LPAD (seq_id, 4, '0'),*
                                         *NULL,*
                                         *'NO' ) PORT,*apex_item.POPUPKEY_FROM_LOV(5,c005,'VESSELS_DE',NULL,NULL,NULL,NULL,NULL,
                                'style="width:150px;background-color:#FBEC5D; "') vessel_id,
      apex_item.text(7,c007,8,null,'style="background-color:#FBEC5D;"'
||'onchange="f_set_start_date(this,f7_'||LPAD(seq_id, 4,'0')||')"') trip_start_date,
        apex_item.text(8,c008,5,null,'style="background-color:#FBEC5D"') trip_start_time,
        apex_item.text(9,c009,null,10,'style="width:100px;background-color:#FBEC5D"') trip_end_date,
        apex_item.text(10,c010,5,null,'style="background-color:#FBEC5D"') trip_end_time,
        apex_item.SELECT_LIST_FROM_LOV(11,c011,'TRIP_TYPE','style="width:100px;background-color:#FBEC5D; "') trip_type,
        apex_item.SELECT_LIST_FROM_LOV(12,c012,'YES_NO','onchange="setMultipleFishermen(#ROWNUM#);"','YES',0,' ','f12_#ROWNUM#') multiple_fishermen,
        apex_item.text(13,c013,3,null,'style="background-color:#FBEC5D"') days_at_sea,
        apex_item.text(14,c014,3,null,'style="background-color:#FBEC5D"') nbr_of_crew,
       -- apex_item.hidden(15,c015) supplier_trip_id,
        apex_item.hidden(16,c016,1) trip_nbr,
        apex_item.text(17,c017,5) partner_vtr
from apex_collections where collection_name = 'TRIP_C'
}

Where clause and order by to DAO classes

Hi
Is it ok(I mean design wise) to pass the 'where clause' conditions and order by clause as a parameter to the method of DAO class?

Well, I would suggest you write seperate methods in your dao , one to select data without the where clause and one to select data with the where clause thrown in. If you have different 'where' clauses for selecting different kinds of data, have that many dao methods. The dao methods being specific know exactly what is the data that's coming in.
Lets assume you have a list of purchase orders and each purchase order is indetified by a unique id called PURCHASE_ORDER_ID.
1. The following code would populate a purchase order's details given an id.
private statis final String QUERY_1 = "select * from PURCHASE_ORDERS where PURCHASE_ORDER_ID = ? ";
PurchaseOrderModel getPurchaseOrderData(long poId){
     //get a prepared statement from your connection
     PreparedStatement pst = conn.prepareStatement(QUERY_1);
     //set the poId passed as params to your query
     pst.setLong(1, poId);
     ResultSet rs = pst.executeQuery();
     if(rs.next()){
          //populate data into a model
     finally{
          //clean up resources
     return model;
}2. The following code would return a list of PurchaseOrderModel's whose shipping date falls between a set of dates selected by the user.
private statis final String QUERY_2 = "select * from PURCHASE_ORDERS where SHIPPING_DATE between ? and ? ";
PurchaseOrderModel getPurchaseOrdersBetweenDates(list bindValues){
     //get a prepared statement from your connection
     PreparedStatement pst = conn.prepareStatement(QUERY_1);
     //set the dates passed as params to your query
     //we know that the List ought to contain only 2 dates
     pst.setDate(1, (Date)bindValues.get(0));
     pst.setDate(2, (Date)bindValues.get(1));
     ResultSet rs = pst.executeQuery();
     if(rs.next()){
          //iterate and populate data into a model
          //add model to a list
     finally{
          //clean up resources
     return list;
     3. This is more interesting - the dao method searches a list of Purchase Orders starting with a set of specific words. The words themselves may be one or many. This means that the number of '?' in your prepared statement may be dynamic. Each element of the list is a String that contains the start substring of a purcahse order name. For example - the list may contain elements like ["a", "ab", "c", "gh"] and the dao method returns all purchase order starting with these names.
private statis final String QUERY_3 = "select * from PURCHASE_ORDERS where ";
PurchaseOrderModel getPurchaseOrderNameMatches(list bindValues){
     //construct the query dynamically
     StringBuffer query = new StringBuffer(QUERY_3);
     int count = 0;
     for(Iterator itr = bindValues.iterator(); itr.hasNext();;){
          String value = (String)itr.next();
          query.append ("name like 'value%' ");
          if (count != 0 and (count+1 != bindValues.length)){
               query.append(" or ");
          count ++;
     //get a prepared statement from your connection
     PreparedStatement pst = conn.prepareStatement(query.toString());
     ResultSet rs = pst.executeQuery();
     if(rs.next()){
          //iterate and populate data into a model
          //add model to a list
     finally{
          //clean up resources
     return list;
To sum up,
1. You need as many methods as you have different kinds of searches (one method for each kind of 'where' clause).
2. The ejb/business layer would examine the data and decide on which method to call.
3. Increases coding effort, but makes the code clean and readable. Each layer does it's job. Thus we dont have ejbs forming 'where' clauses and so on.
Having said that, it really is your decision - you should take into consideration the following factors -
1. How big is the project ? If its a huge codebase developed by many people, then segregate the responsibilities clearly in each layer as I have outlined. For a small scale project, you could go with your approach.
2. Whats the take on maintenance and future add-ons ? Do you see the codebase growing with time ?
3. Is your project a commercial one - is it a product that needs to be maintained or is it a one-off development - develop once and you are done with it.
4. What are the design considerations ? Is somebody going to audit code for quality ? Or is it a academic one ?
You should take into account all these before deciding to go one way or the other.
A general thumb rule should be that you should be convinced that your code readable (maintainable), scalable and efficient. Anything that you do towards these ends is good code/design despite what people/books/patterns say, IMO.
cheers,
ram.

Coldfusion session/client variables?

We have multiple users using VPN to get to our intranet. When the second user gets on they get the first person's session/client variables?
I have tried looking for the session/client variables and where they are stored but I can't seem to find them. I have tried searching out the cookies.
I would appreciate any help.

There are not too many people on this forum that have dabbled with ColdFusion. I used to, but that was more than one decade ago.
Your best bet on getting assistance with your problem, is to go to the ColdFusion forum.

Creating multidimensional Context Variable

How can I create a multidimensional String array as a context variable and how can I pass values to that
Thanks
Fahad Hamsa

WHat is a multidimensional String array ?
If you require a String array , you can create a node of cardinality 0..n and a context attribute of type string
Regards,
Subramanian V.

HELP: Forms and Report Session Context Problem

Hi:
I use CONTEXT in our applications. Every time there's a query to
any of the applications tables it's added a predicate in WHERE
clause to restrict access to the data that belongs to different
people!
The context is set when the user LOGIN into applications (NOT
DATABASE) using our login system. Each user that login's in
applications use one user that is always the same (X_USER)
connecting to database. Each session created after our login
system validate user creates a CONTEXT in session and that
context is used to restrict access in tables with the predicate!
Our problem is... Calling reports form forms on WEB create
another session with the user X_USER and when create's that
session the CONTEXT parameters are not SET, so i can SELECT data
from any table!
Is there a way to execute in reports our PROCEDURE that set
context of the session?
Can the reports use the same session of the forms ?
Any solution?
Thankx in advance,
Ricardo

No, Forms and Reports use different sessions. What you can do is
to add a parameter to the report that contains the context. And
use the Before Parameter Form trigger to set the appropriate
action.
I used to set a role to the report user this way, but you can
adapt it to your particular needs.

Session Context Variable and Order by clause

Similar Messages

Maybe you are looking for