Set complex condition of process flow transition by OMB skript

Hi,
i would like to set a complex condition for a process flow transition with OMB+.
If i use:
OMBALTER PROCESS_FLOW 'somename' ADD TRANSITION 'yyy' FROM ACTIVITY 'a' to 'b' SET PROPERTIES (TRANSITION_CONDITION) VALUES ('some complex condition')
the skript sets the condition but the radiobutton within the transition condition editor still point to 'Enumerated Condition' and the complex condition editor sheet, where my condition should be printed is empty. But the Object details within the Process editor shows my condition correct.
We use 11gR1 11.1.0.7.0 (OWB & DB).
Has anybody a clue if i am able to set the transitioncondition to COMPLEX ? Or is it a bug ?
Your Help is appreciated, thanks
Thomas

Hi Thomas
You use the property COMPLEX_CONDITION on the activity for complex transition condition expressions.
Cheers
David

Similar Messages

Complex condition in process flow transition

From a mapping i have three outgoing transitions:
1: "KM_UTIL_PKG"."GETTESTMODE"() = 0
2: "KM_UTIL_PKG"."GETTESTMODE"() = 1
3: unconditional
the process flow validates ok, deploys ok but when it is executed the error message is :
ORA-06550: line 1, column 1085: PLS-00201: identifier 'KM_UTIL_PKG.GETTESTMODE' must be declared ORA-06550: line 1, column 1058: PL/SQL: Statement ignored.
Although the function is there.
What am i doing wrong ?. Has anyone an example of the expected syntax in the transition condition editor > complex condition window ?
Ron

Try giving just = 0 and = 1 without the function call, as the function call is already appended in the where clause.
For example I was able to make it work by just giving IS NULL and IS NOT NULL.
Also there is VALIDATE button within the window where we give the complex condition. Try to validate the condition there itself.
Best,
Manohar

OWB Process Flow - Transition Warinig OR Error - Question

Hi all,
I have a question. In a Simple Process Flow I have:
Start -> Mapping -> Warning -> Email
-> Erro -> Email
->Sucess - End
Is necessary use 3 Transition ?
Can I do only 2 Transition like
Start -> Mapping -> Warning OR Error -> Email
->Sucess - End
How can I do "Warning OR Error" on a Transition?
If i put any condition on the Transition:
Start -> Mapping -> Email
->Sucess - End
It means
Start -> Mapping -> Warning OR Error -> Email
->Sucess - End
Thanks

If i put any condition on the Transition:
Start -> Mapping -> Email
->Sucess - End
It means
Start -> Mapping -> Warning OR Error -> Email
->Sucess - End
it exactly what you need
Edited by: hungsao on Oct 17, 2012 9:10 PM

Process Flow Transitions are very slow

I have a process flow with few activities. All these acttivities are executing some PL/SQL procedures.
But I have noticed, when I ran the procedd flow it takes more than 5 minutes for eaqch transition. For a example I have two activities called Start_Proc and Calculate_Proc. When Start_Proc finished, next step is Calculate_Proc. NO coinditional transitions inbetween those two.
But Wen Start_Proc finished it shows Start_Proc1on process monitor and it takes more than 5 minutes to goto Calculate_Procactivity.
I have removed all codes inside these procedures and put null for testing purpose. So basically now all procedures do nothing and takes lessthan 2 millisecond to execute. Still when I run process flow with 4 steps it takes more than 30 minutes to finish.
I tried optimizing repositiry option as well. But no luck at all.
I am using OWB 10.2.x version
Thanks in advance,
Edited by: mc**** on 8/12/2010 13:57

Oleg wrote:
did you use for deleting data from audit tables truncate_audit_execution_tables script or use supplied with OWB purge_audit_template.sql script?Hi Oleg,
Actually I used API for that instead of using script as below
BEGIN
wb_rt_api_purge.purge_deployment(TO_DATE('2000/01/01','YYYY/MM/DD'),TO_DATE('2010/08/30','YYYY/MM/DD'));
wb_rt_api_purge.purge_execution(TO_DATE('2000/01/01','YYYY/MM/DD'),TO_DATE('2010/09/01','YYYY/MM/DD'));
COMMIT;
END;
Thanks

How deploy a transition using complex condition by OMB+?

Hello,
I can’t deploy a process flow package using OMB+
But, it doesn't work because of a transition with complex condition.
I will try to explain my problem on the best :
I am working in OWB 10g R2.
I developped several process flow of this modele:
- I have a package module named : PFL_MODULE
- In this package module, I have created four process flow package :
PPK_ODS
PPK_DWH
PPK_DMT
PPK_SCH
In each package I have three or four process flow.
To deploy it, I use OMB+
I created this script :
+# move to apropriate context+
OMBCC '/$project_name/PFL_MODULE'
+puts "Current context is [OMBDCC]"+
+puts ""+
+# Connect to the default control center+
+puts "Connect to the default control center"+
+puts ""+
+OMBCONNECT CONTROL_CENTER+
+puts "Deploying workflows :"+
OMBCREATE TRANSIENT DEPLOYMENT_ACTION_PLAN 'PROCESS_FLOW_PACKAGES' \
ADD ACTION 'PPK_ODS' \
SET PROPERTIES (OPERATION) VALUES ('CREATE') \
SET REFERENCE PROCESS_FLOW_PACKAGE 'PPK_ODS' \
ADD ACTION 'PPK_DWH' \
SET PROPERTIES (OPERATION) VALUES ('CREATE') \
SET REFERENCE PROCESS_FLOW_PACKAGE 'PPK_DWH' \
ADD ACTION 'PPK_DMT' \
SET PROPERTIES (OPERATION) VALUES ('CREATE') \
SET REFERENCE PROCESS_FLOW_PACKAGE 'PPK_DMT' \
ADD ACTION 'PPK_SCH' \
SET PROPERTIES (OPERATION) VALUES ('CREATE') \
SET REFERENCE PROCESS_FLOW_PACKAGE 'PPK_SCH' \
OMBDEPLOY DEPLOYMENT_ACTION_PLAN 'PROCESS_FLOW_PACKAGES'
OMBDROP DEPLOYMENT_ACTION_PLAN 'PROCESS_FLOW_PACKAGES'
+puts [OMBCOMMIT]+
+puts "Workflows are deployed"+
when I tested it, everything worked !
But, recently, I had to modify one of my process flow. This process flow is in PPK_SCH package (and it named PRC_SCH_FULL)
I had to change a transition using an enumerated condition (SUCCESS, ERROR) by a transition using a complex condition.
My condition is very simple, I test one of my variable ("PRC_SCH_FULL"."VAR_END" =1)
When I deploy my new process flow by the control center in OWB it works.
But, when I deploy it by my script I have an error message :
*OMB05602 : An unknown Deployment error has occured for Object Type DeploymentContextImpl.generate WBGeneratedObject[] is null or length 0 for PPK_SCH.*
I'm sure the problem is in transition because when I put an enumerted condition back, it works again.
So, How can I do to deploy my process flow package that contains a process flow with complex condition in a transition?
thank you in advance for any suggestions.
Jue.
Edited by: Jue on 20 juil. 2011 05:06

If I get what you said, then you have 2 enumerated and one complex condition?
Rules for Valid Transitions
For a transition to be valid, it must conform to the following rules:
All activities, apart from START and END, must have at least one incoming transition.
Only the AND and OR activities can have more than one incoming transition.
Only a FORK activity can have more than one unconditional outgoing transition.
A FORK activity can have only unconditional outgoing transitions.
An activity that has an enumerated set of outcomes must have either an outgoing transition for each possible outcome or an unconditional outgoing transition.
An activity can have zero or more outgoing complex expression transitions.
An activity, with an outgoing complex expression transition, must have an unconditional outgoing transition.
An END_LOOP transition must have only one unconditional transition to its associated FOR_LOOP or WHILE_LOOP activity.
The transition taken by the exit outcome of a FOR_LOOP or WHILE_LOOP must not connect to an activity that could be carried on as a result of the "loop."

Process flow lags

Hi All,
Can I give a condition in process flow stating that when a mapping is completed with success or completed with warning then continue to next mapping but when It fails with error then to to END_ERROR.? I mean if during success or warning.
Regards,
Danish

Hi,
1.) put two endings in your workflow: a) End_error, b) end_success
2.) make a transition from your mapping c) to the next mapping d)
3.) make a transition from c) to d)
4.) make a transition from c) to a)
5.) configure transition from 2.) that this is used when mapping_result=sucess (right mouseclick on transition),
6.) configure transition from 3.) that this is used when mapping_result=warning,
7.) configure transition from 4.) that this is used when mapping_result=errror.
Regards,
Detlef

User Defined Activity "hangs" Process Flow if it runs for more than 10mins

I have been using OWB (10g r2) for a while and have used "User Defined" activities in production process flows successfully before.
However my problem now is that the activity (shell command) I want to perform, takes more than 10 minutes to complete. If I run the process flow with a parameter that generates a shell command that executes in two or three minutes, the process flow continues past the sucessfully executed user defined activity to the next activity.
BUT
If I run the same process flow (without modification or even redeployment) with a different parameter , the user defined acivity sucessfully executes (after about 11 minutes or so) but the process flow , doesnt seem to know that it is finished and just says it is still executing.
my "user defined" activity has
COMMAND: /usr/bin/ksh
PARAMETER_LIST bound to a variable which is set earlier in the process flow.
RESULT_CODE:
SCRIPT :
SUCESS_THRESHOLD : 0
by examining (RUNTIME CONTROL CENTER SCHEMA).all_rt_audit_execution_params
I can see that the variable contents assigned to RESULT_CODE look like this
'/usr/bin/rsh -n WINSRV1 dtsrun /usa /ppw /S WINSQLSRV /N JOBNAME_SHORT'
or this
'/usr/bin/rsh -n WINSRV1 dtsrun /usa /ppw /S WINSQLSRV /N JOBNAME_LONG'
I put the -n in because I thought that may have been the problem, but I think its more likely that there is come sort of ".properties" in a runtime file that needs to be set to control the "timeout" of user defined activities.
(like in Runtime.properties
property.RuntimePlatform.0.NativeExecution.Shell.security_constraint = NATIVE_JAVA
except maybe
.........Nativeexecution.timeout = .....?????
Has anybody had a problem like this? Found a document describing available configuration properties for PF activites?
Can anyone help?

I have been using OWB (10g r2) for a while and have used "User Defined" activities in production process flows successfully before.
However my problem now is that the activity (shell command) I want to perform, takes more than 10 minutes to complete. If I run the process flow with a parameter that generates a shell command that executes in two or three minutes, the process flow continues past the sucessfully executed user defined activity to the next activity.
BUT
If I run the same process flow (without modification or even redeployment) with a different parameter , the user defined acivity sucessfully executes (after about 11 minutes or so) but the process flow , doesnt seem to know that it is finished and just says it is still executing.
my "user defined" activity has
COMMAND: /usr/bin/ksh
PARAMETER_LIST bound to a variable which is set earlier in the process flow.
RESULT_CODE:
SCRIPT :
SUCESS_THRESHOLD : 0
by examining (RUNTIME CONTROL CENTER SCHEMA).all_rt_audit_execution_params
I can see that the variable contents assigned to RESULT_CODE look like this
'/usr/bin/rsh -n WINSRV1 dtsrun /usa /ppw /S WINSQLSRV /N JOBNAME_SHORT'
or this
'/usr/bin/rsh -n WINSRV1 dtsrun /usa /ppw /S WINSQLSRV /N JOBNAME_LONG'
I put the -n in because I thought that may have been the problem, but I think its more likely that there is come sort of ".properties" in a runtime file that needs to be set to control the "timeout" of user defined activities.
(like in Runtime.properties
property.RuntimePlatform.0.NativeExecution.Shell.security_constraint = NATIVE_JAVA
except maybe
.........Nativeexecution.timeout = .....?????
Has anybody had a problem like this? Found a document describing available configuration properties for PF activites?
Can anyone help?

BPC 7.5 NW Business Process Flow reopen function

Hi,
i have e question concerning the reopen function whithin business process flows.
I set up a business process flow with several steps and use the match step region function. The users are able to go through the bpf steps just for one plant and they don't have to wait for the users of other plants. In most steps we implement a reopen function for the case that users want do add or correct something. I expect, when I reopen one previous step, this step just reopen for one plant, but the reopen function opens the previous step for all plants.
Are there any posibilities to use this reopen function just for one plant and not for all? Is this perhaps a customizing issue?
Thanks in advance
Christian

Hello Christian,
This guide may help you on finding a way to perform that:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00971e51-27eb-2c10-479d-d1a0fa8f2cc0?quicklink=index&overridelayout=true
Best regards,
Vin

Is there a way to translate process flow to OMB+ ?

Hi all,
Is there a way in OWB to translate process flow/mapping into OMB+ script?
thanks.

Well I can't say I have tried this with the OS, but I have done this with software that we had where I worked a number of years ago that somebody had bought in Europe and then moved to the US. Also, make sure you back up your computer before doing any of this, and no guarantees - especially when messing with System files!
If you use Resedit to open application files and explore a bit you will often see things that appear as the menus and messages that pop up. You can try (and I emphasize "try") to replace these with something in Spanish. Usually you should not replace it with anything longer otherwise it may not fit in properly. Also some menus are contained elsewhere and you won't be able to change those at all.

Synchronize Process Flows

I need to synochronize few process flows using a OMB SCRIPT.
Can someone pls help me to get the OMBSYNOCHRONIZE command work for Process flows?
Do anyone know the Matching Strategy Values for Process flows? Couldn't get it working. The error i get
Eg.
OMBSYNCHRONIZE PROCESS_FLOW 'PF_GEO10' \
ACTIVITY 'IAR_BRDINT_DMIS_BRI_TIN1' \
TO PROCESS_FLOW 'PF_GEO10' ACTIVITY 'IAR_BRDINT_DMIS_BRI_TIN1' \
USE (SYNCHRONIZE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'INBOUND_ACTIVITY_MATCH
BYOBJECT_UOID')
PUB01804: The matching strategy INBOUND_ACTIVITY_MATCH_BY_OBJECT_UOID specified
is invalid for the source oracle.owb.processflow.Activity and target oracle.owb.
processflow.Activity.

.... found solution, use 'MATCH_BY_UOID' instead of 'INBOUND_ACTIVITY_MATCH_BY_OBJECT_UOID'

Process flow Condition Help

Thanks in Advance
I have a process flow like below
I have Function(out parameter) --> Returning 0 and 1
I have 2 mappings
1) Map1
2) Map2
What i need is
If function returns 0 i want to run MAP1
If function returns 1 i want to run MAP2
I my process flow what i did is
Start--> function --> Map1 --> Success
--> Map2 --> Success
After Function I added the complex condition(RTN_CODE = 0) for Map1
I added the complex condition(RTN_CODE = 1) for Map2
I am getting error VLD-10028: An activity having an outgoing transition with a complex condition must have another unconditional outgoing transition
If function returns 0 i want to run MAP1

Hi,
if you use conditional transitions you need one conditional transitions for each possible condition outcome or one transition without any condition that is used when none of the other conditions is met.
So you have to handle the case that the return value of your function is neither 0 or 1. Just add a transition without condition an connect it to the "end with errors" operator. This path will never be used if you make sure your function only returns 0 or 1. It is just required to validate the process flow.
Regards,
Carsten.

Problems with setting up the wait in a process flow

Hi,
I have process flow where I need to use a wait function.
The value of minimum_delay is set to 30
literal = true
the value of until_date I've been trying to set to a appropriate date format that is consistent with the default in the database.
When doing this I get the error message ORA-01841: (full) year must be between -4713 and +9999, and not be 0
setting the value of until_date to null and literal still true gives me the error ORA-06502: PL/SQL: numeric or value error. Setting the literal to false also gives me this error.
Does anyone know how I can set this up correctly? And if its possible, not use the until_date parameter.
any help is appreciated
regards,
Ragnar
this is on a 10.2.0.3 database, windows 2003 server
OWB client 10.2.0.3.33
OWB repository: 10.2.0.3.0
Message was edited by:
rhaug

Thanks for your replies:
I've tried running the Processflow with different parameters.
The processflow I am trying to run is in its own Module, with just one processflow, and the wait is the only activity in this.
Its a nice mix of english and norwegian in the error messages, but I'll try to translate as best I can.
Minimum_delay: 30
Literal: true
Until_date: blank
Literal: true
ORA-01867: intervallet er ugyldig (illegal interval)
ORA-06512: ved "OWB_SYS.WB_RT_CONVERSIONS", line 371
ORA-06502: PL/SQL: numerisk feil eller verdifeil: feil under konvertering av tegn til tall(numeric error or valueerror: error under conversion from character to number)
ORA-06512: ved line 3
Minimum_delay: 30
Literal: true
Until_date: null
Literal: false/true
RPE-01003: An infrastructure condition prevented the request from completing.
RPE-01038: Failed to evaluate expression declare "$LOOP_DETECT$" NUMBER := 0;function "WAIT_TEST" return VARCHAR2 is "ITEM_TYPE" VARCHAR2(4000) := (wb_rt_task_variable.get_value(77109));"ITEM_KEY" VARCHAR2(4000) := (wb_rt_task_variable.get_value(77111));"EVAL_LOCATION" VARCHAR2(4000) := (wb_rt_task_variable.get_value(77112));function "WAIT" return VARCHAR2 is "WARNING" NUMBER := 2;"RETURN_RESULT_NUMBER" NUMBER := NULL;"NUMBER_OF_ERRORS" NUMBER := 0;"SUCCESS" NUMBER := 1;"ERROR" NUMBER := 3;"OK" NUMBER := 1;"FAILURE" NUMBER := 3;"AUDIT_ID" NUMBER := 77113;"RETURN_CODE" NUMBER := NULL;"NUMBER_OF_WARNINGS" NUMBER := 0;"RETURN_RESULT" VARCHAR(64) := NULL;"PARENT_AUDIT_ID" NUMBER := 77108;"OK_WITH_WARNINGS" NUMBER := 2;begin "$LOOP_DETECT$" := "$LOOP_DETECT$" + 1;if "$LOOP_DETECT$" > 2 then raise_application_error(-20001, 'Loop detected calling "WAIT"');end if;return wb_rt_conversions.from_timestamp_tz(null);end;begin "$LOOP_DETECT$" := "$LOOP_DETECT$" + 1;if "$LOOP_DETECT$" > 2 then raise_application_error(-20001, 'Loop detected calling "WAIT_TEST"');end if;return "WAIT";end;begin :result := "WAIT_TEST";end;. Please modify the expression, redeploy and retry again.
ORA-06550: linje 1, kolonne 835:
PLS-00307: for mange deklarasjoner av FROM_TIMESTAMP_TZ stemmer med dette kallet (to many declarations of FROM_TIMESTAMP_TZ matches with this call)
ORA-06550: linje 1, kolonne 828:
PL/SQL: Statement ignored
Minimum_delay: 30
Literal: true
Until_date: 23-05-2009
Literal: true
ORA-01867: intervallet er ugyldig (illegal interval)
ORA-06512: ved "OWB_SYS.WB_RT_CONVERSIONS", line 371
ORA-06502: PL/SQL: numerisk feil eller verdifeil: feil under konvertering av tegn til tall (numeric error or valueerror: error under conversion from character to number)
ORA-06512: ved line 3
Minimum_delay: 30
Literal: true
Until_date: ’23-05-2009’
Literal: true
RPE-02083: Process WAIT_TEST has errored Activities. Dependent objects may not have been deployed. You can use Oracle Workflow Monitor to retry the activities or abort the Process.
RPE-02075: Oracle Workflow failed to process the execution request for Activity WAIT_TEST:WAIT. This may be because dependent objects have not yet been deployed.
ORA-01841: (helt) år må være mellom -4713 og +9999, og ikke være 0 ([whole] year must be between -4713 and +9999, and not be 0)
WB_RT_WORKFLOW_UTIL_10G.Execute_Any_Task(TEST_MOD, WB_IK_20080602_101807_77183, 12489, RUN)
WB_RT_WORKFLOW_UTIL_10G.Execute_Wait(TEST_MOD, WB_IK_20080602_101807_77183, 12489, RUN)
Wf_Engine_Util.Function_Call(WB_RT_WORKFLOW_UTIL_10G.EXECUTE_WAIT, TEST_MOD, WB_IK_20080602_101807_77183, 12489, RUN)
Minimum_delay: 30
Literal: true
Until_date: TO_DATE('23-05-2009','DD-MM-YYYY')
Literal: false
ORA-01867: intervallet er ugyldig (illegal interval)
ORA-06512: ved "OWB_SYS.WB_RT_CONVERSIONS", line 371
ORA-06502: PL/SQL: numerisk feil eller verdifeil: feil under konvertering av tegn til tall (numeric error or valueerror: error under conversion from character to number)
ORA-06512: ved line 3
So thats basically it.
What language settings have you been using for this to work?
Ragnar

How to set E-Mail Activitie in Process Flow

Hi All,
I am very new to OWB and i created process flow based on documents.Process flow run successfully.Now i need to set E-mail Activity to that process flow. i read some of links and help topics.But iam not clear.so pleaseme tell how to do.
Thanks,

Hi
You just add the Email icon to the palette and if a process runs sucess or error (depends on your transition). Just add the email icon and click on it. Fill in the necessery values, such as
From
To
Subject
Body
SMTP server.
If you have a mailserver installed on your machine - just enter "localhost".
Else you will need to use an existing email server.
BR / Ander

Upg 10gr2 to 11gr2, process flow: RPE-01003: An infrastructure condition...

Hello.
I am in a bit of a pickle right now after upgrading OWB from 10.2.0.4 to 11.2.0.3, and I'm here requesting a sanity check. Due to the need of a database upgrade, OWB also has to be upgraded and the data warehouse that has been functional and stable for a long time on 10g needs to be migrated to 11g. So this is main deal:
I just want to migrate all mappings and workflows and run them as before. I do not want to redeploy as that will force an enormous effort to regression test everything.
So the OWB upgrade went seemingly well. Everything runs as before. The problem started when I tested deployment of a mapping and subsequently
1. Deployment of a mapping goes well.
2. Deployment of the process flow goes well.
3. Deployment of a mapping that is run in a process flow however causes problems when the process flow is executed.
The deployment goes well. However the mapping fails when I run the process flow with the following error:
RPE-01003: An infrastructure condition prevented the request from completing: no rows found for select into statement.
I subsequently sync the mapping in the process flow redeploy the process flow. Now ALL the other mappings in the process flow that have not been redeployed since the upgrade fails with the same error. However the one that failed before is executed correctly. If I redeploy all the other mappings (which can be dozens) it works, but now I'm faced with a serious regression testing period.
Personally I have a couple of theories that I hope you can debunk or possibly verify.
1. It might be location oriented. I say that because my locations are a bit... iffy. When I redeploy some mappings in some locations it always insists on redeploying the connector (regardless if I deploy it stand-alone right before), and my location passwords are never "remembered" between sessions.
2. I do not have specific knowledge about how workflows are generated in the repository, but if it's run by ID, maybe a new ID is generated for the mapping when it is redeployed, and subsequently the process flow gets a new ID when it gets redeployed?
I hope someone has seen this before and can get me on the right track. Thanks very much.

Here is a log that also illustrates the problem.
First workflow which does not have a redeployed workflow goes okay. That is WF_BOOKED_PRODUCT_020:MAP_BOOKED_PRODUCT_020.
The second workflow, WF_BOOKED_PRODUCT_030:MAP_BOOKED_PRODUCT_030, that is the one that has the redeployed mapping fails.
2013/05/10-09:23:09-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] Initializing execution for auditId= 4358142 parentAuditId= 4358137 topLevelAuditId=4358137 taskName=MAPPER_T_MAIN:WF_BOOKED_PRODUCT_020
2013/05/10-09:23:09-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
2013/05/10-09:23:09-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.ProcessFlow'
2013/05/10-09:23:10-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] Thin driver connection time - 75 millisecond(s)
2013/05/10-09:23:10-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] Workflow equivalent DB Java Encoding = ISO-8859-1
2013/05/10-09:23:10-CEST [41D041D][] Explicit garbage collection - requested
2013/05/10-09:23:10-CEST [41D041D][] AuditId=4358147: Processing execute request
2013/05/10-09:23:10-CEST [41D041D][] Free Memory(bytes)=5547904 Total Memory(bytes)=12557312 Used Memory(bytes)=7009408 Used Memory(percent)=56%
2013/05/10-09:23:10-CEST [15261526][] Thin driver connection time - 75 millisecond(s)
2013/05/10-09:23:10-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Initializing execution for auditId= 4358147 parentAuditId= 4358142 topLevelAuditId=4358137 taskName=WF_BOOKED_PRODUCT_020:MAP_BOOKED_PRODUCT_020
2013/05/10-09:23:10-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
2013/05/10-09:23:11-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.PLSQL'
2013/05/10-09:23:11-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] OCI driver connection time - 236 millisecond(s)
2013/05/10-09:23:11-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] PLSQL callspec: declare "$MAP_ENV$" owbsys.wb_rt_mapaudit.wb_rt_name_values;begin "$MAP_ENV$"(1).param_name := 'OBJECT_ID';"$MAP_ENV$"(1).param_value := 206448;"$MAP_ENV$"(2).param_name := 'AUDIT_ID';"$MAP_ENV$"(2).param_value := 4358147;"$MAP_ENV$"(3).param_name := 'OPERATING_MODE';"$MAP_ENV$"(3).param_value := '0';"$MAP_ENV$"(4).param_name := 'PURGE_GROUP';"$MAP_ENV$"(4).param_value := 'WB';"$MAP_ENV$"(5).param_name := 'MAX_NO_OF_ERRORS';"$MAP_ENV$"(5).param_value := '50';"$MAP_ENV$"(6).param_name := 'COMMIT_FREQUENCY';"$MAP_ENV$"(6).param_value := '1000';"$MAP_ENV$"(7).param_name := 'AUDIT_LEVEL';"$MAP_ENV$"(7).param_value := '2';"$MAP_ENV$"(8).param_name := 'BULK_SIZE';"$MAP_ENV$"(8).param_value := '1000';"$MAP_ENV$"(9).param_name := 'CHUNK_PARALLEL_LEVEL';"$MAP_ENV$"(9).param_value := '0';"$MAP_ENV$"(10).param_name := 'CHUNK_EXECUTE_RESUME_TASK';"$MAP_ENV$"(10).param_value := 'false';"$MAP_ENV$"(11).param_name := 'CHUNK_FORCE_RESUME';"$MAP_ENV$"(11).param_value := 'false';"$MAP_ENV$"(12).param_name := 'CHUNKNUM_TIMES_TO_RETRY';"$MAP_ENV$"(12).param_value := '2'; ? := "STG_MAPPER"."MAP_BOOKED_PRODUCT_020"."MAIN"(p_env=>"$MAP_ENV$");end;
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] PLSQL Mapping completed auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Started Get Execution Results auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Return Result=0 auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Has Custom Parameters=false auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Completed Get Execution Results auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Started Report Execution Results auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] report_execution_result auditId=4358147
2013/05/10-09:23:12-CEST [15261526][OWB_REPOWNER.OWB_REPOWNER] Completed Report Execution Results auditId=4358147
2013/05/10-09:23:12-CEST [41D041D][] Free Memory(bytes)=2954368 Total Memory(bytes)=12557312 Used Memory(bytes)=9602944 Used Memory(percent)=77%
2013/05/10-09:23:12-CEST [41D041D][] AuditId=4358147: Request completed
2013/05/10-09:23:12-CEST [7F097F09][OWB_REPOWNER.OWB_REPOWNER] report_execution_result auditId=4358142
2013/05/10-09:23:12-CEST [41D041D][] Free Memory(bytes)=2225600 Total Memory(bytes)=12557312 Used Memory(bytes)=10331712 Used Memory(percent)=83%
2013/05/10-09:23:12-CEST [41D041D][] AuditId=4358142: Request completed
2013/05/10-09:23:13-CEST [41D041D][] Explicit garbage collection - requested
2013/05/10-09:23:13-CEST [41D041D][] AuditId=4358159: Processing execute request
2013/05/10-09:23:13-CEST [41D041D][] Free Memory(bytes)=6296536 Total Memory(bytes)=12557312 Used Memory(bytes)=6260776 Used Memory(percent)=50%
2013/05/10-09:23:13-CEST [88E088E][] Thin driver connection time - 81 millisecond(s)
2013/05/10-09:23:13-CEST [88E088E][OWB_REPOWNER.OWB_REPOWNER] Initializing execution for auditId= 4358159 parentAuditId= 4358137 topLevelAuditId=4358137 taskName=MAPPER_T_MAIN:WF_BOOKED_PRODUCT_030
2013/05/10-09:23:13-CEST [88E088E][OWB_REPOWNER.OWB_REPOWNER] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
2013/05/10-09:23:13-CEST [88E088E][OWB_REPOWNER.OWB_REPOWNER] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.ProcessFlow'
2013/05/10-09:23:13-CEST [88E088E][OWB_REPOWNER.OWB_REPOWNER] Thin driver connection time - 74 millisecond(s)
2013/05/10-09:23:13-CEST [88E088E][OWB_REPOWNER.OWB_REPOWNER] Workflow equivalent DB Java Encoding = ISO-8859-1
2013/05/10-09:23:14-CEST [41D041D][] Explicit garbage collection - requested
2013/05/10-09:23:14-CEST [41D041D][] AuditId=4358164: Processing execute request
2013/05/10-09:23:14-CEST [41D041D][] Free Memory(bytes)=5425128 Total Memory(bytes)=12557312 Used Memory(bytes)=7132184 Used Memory(percent)=57%
2013/05/10-09:23:14-CEST [6F866F86][] Thin driver connection time - 79 millisecond(s)
2013/05/10-09:23:14-CEST [6F866F86][OWB_REPOWNER.OWB_REPOWNER] Initializing execution for auditId= 4358164 parentAuditId= 4358159 topLevelAuditId=4358137 taskName=WF_BOOKED_PRODUCT_030:MAP_BOOKED_PRODUCT_030
2013/05/10-09:23:14-CEST [6F866F86][OWB_REPOWNER.OWB_REPOWNER] oracle.wh.runtime.platform.adapter.InfrastructureException: RPE-01003: An infrastructure condition prevented the request from completing.
- no rows found for select into statement
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:476)
     at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:1391)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:811)
Caused by: java.sql.SQLException: no rows found for select into statement
     at sqlj.runtime.error.Errors.raiseError(Errors.java:118)
     at sqlj.runtime.error.Errors.raiseError(Errors.java:60)
     at sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO(RuntimeRefErrors.java:62)
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:436)
     ... 6 more
java.sql.SQLException: no rows found for select into statement
     at sqlj.runtime.error.Errors.raiseError(Errors.java:118)
     at sqlj.runtime.error.Errors.raiseError(Errors.java:60)
     at sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO(RuntimeRefErrors.java:62)
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:436)
     at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:1391)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:811)
2013/05/10-09:23:14-CEST [6F866F86][OWB_REPOWNER.OWB_REPOWNER] oracle.wh.runtime.platform.adapter.InfrastructureException: RPE-01003: An infrastructure condition prevented the request from completing.
- no rows found for select into statement
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:476)
     at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:1391)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:811)
Caused by: java.sql.SQLException: no rows found for select into statement
     at sqlj.runtime.error.Errors.raiseError(Errors.java:118)
     at sqlj.runtime.error.Errors.raiseError(Errors.java:60)
     at sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO(RuntimeRefErrors.java:62)
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:436)
     ... 6 more
java.sql.SQLException: no rows found for select into statement
     at sqlj.runtime.error.Errors.raiseError(Errors.java:118)
     at sqlj.runtime.error.Errors.raiseError(Errors.java:60)
     at sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO(RuntimeRefErrors.java:62)
     at oracle.wh.runtime.platform.service.controller.WarehouseObjectImpl.<init>(WarehouseObjectImpl.java:436)
     at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:1391)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:811)
2013/05/10-09:23:14-CEST [41D041D][] Free Memory(bytes)=3686600 Total Memory(bytes)=12557312 Used Memory(bytes)=8870712 Used Memory(percent)=71%
2013/05/10-09:23:14-CEST [41D041D][] AuditId=4358164: Request completed
2013/05/10-09:23:14-CEST [6F866F86][OWB_REPOWNER.OWB_REPOWNER] Thread terminating due to fatal exception of type oracle.wh.runtime.platform.adapter.InfrastructureException
2013/05/10-09:23:14-CEST [6F866F86][OWB_REPOWNER.OWB_REPOWNER] oracle.wh.runtime.platform.adapter.InfrastructureException: RPE-01003: An infrastructure condition prevented the request from completing.
- no rows found for select into statement

How to set FROM ADDRESS for EMAIL activity in Process Flow

Hi all,
Can any one tell how to set(which address) FROM ADDRESS for EMAIL activity in Process Flow?
Thanks,
Suvvi

Did you set what OWB guide says:
To execute a process flow with an email activity, you may need to access different host machines and ports. New security measures implemented in Oracle Database 11g Release 1 restrict access to hosts and ports. You must explicitly grant access to hosts and ports that the email activity accesses using the DBMS_NETWORK_ACL_ADMIN package.
For example, the user OWBSYS needs to send an email through the mail server mail.example.com using port 25. The DBA must perform the following steps:
1. Create an Access Control List (ACL) for the user OWBSYS using the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.CREATE_ACL
(’acl_for_owb_cc.xml’,’ACL for Control Center’,’OWBSYS’,’CONNECT’);
The ACL has no access control effect unless it is assigned to network target.
2. Assign the Access Control List (ACL) to a network host, and optionally specify a TCP port range. Use the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (’acl_for_owb_cc.xml’,’mail.example.com’,25)
3. Commit the changes made using the COMMIT command.

Set complex condition of process flow transition by OMB skript

Similar Messages

Maybe you are looking for