Set date to session language in Application report

Hi All,
I have a Oracle Apps report. Based on the OU language the report is run, the month of the date should be in that language.
For EX: If the report is run from Italian OU, the date should be in the format 29-SET-2011 (SET is the Italian month for SEP). How can the date session be set in the report?
Thanks

Dear firiend,
Try this code.
Select REGEXP_REPLACE(Date_Column_Name, 'SET', 'SEP') From Table_Name;
Good luck

Similar Messages

Current session language in reports HR_ALL_ORGANIZATIONS_UNITS_TL

hi
The current session language of application is not in English, but when i execute the report it is displaying English values for organization name which are taken from HR_ALL_ORGANIZATIONS_UNITS_TL. Is there any possibility to take data which belong to the current session language?????
Thanks

Use HR_ALL_ORGANIZATION_UNITS_VL instead of HR_ALL_ORGANIZATION_UNITS_TL.
The HR_ALL_ORGANIZATION_UNITS_VL view show the current session language data.
See the view definition below:
CREATE OR REPLACE VIEW HR_ALL_ORGANIZATION_UNITS_VL
(organization_id, row_id, business_group_id, cost_allocation_keyflex_id, location_id, soft_coding_keyflex_id, date_from, name, comments, date_to, internal_external_flag, internal_address_line, type, request_id, program_application_id, program_id, program_update_date, attribute_category, attribute1, attribute2, attribute3, attribute4, attribute5, attribute6, attribute7, attribute8, attribute9, attribute10, attribute11, attribute12, attribute13, attribute14, attribute15, attribute16, attribute17, attribute18, attribute19, attribute20, last_update_date, last_updated_by, last_update_login, created_by, creation_date)
AS
SELECT hao.organization_id,
hao.ROWID,
hao.business_group_id,
hao.cost_allocation_keyflex_id,
hao.location_id,
hao.soft_coding_keyflex_id,
hao.date_from,
haotl.NAME,
hao.comments,
hao.date_to,
hao.internal_external_flag,
hao.internal_address_line,
hao.TYPE,
hao.request_id,
hao.program_application_id,
hao.program_id,
hao.program_update_date,
hao.attribute_category,
hao.attribute1,
hao.attribute2,
hao.attribute3,
hao.attribute4,
hao.attribute5,
hao.attribute6,
hao.attribute7,
hao.attribute8,
hao.attribute9,
hao.attribute10,
hao.attribute11,
hao.attribute12,
hao.attribute13,
hao.attribute14,
hao.attribute15,
hao.attribute16,
hao.attribute17,
hao.attribute18,
hao.attribute19,
hao.attribute20,
hao.last_update_date,
hao.last_updated_by,
hao.last_update_login,
hao.created_by,
hao.creation_date
FROM hr_all_organization_units hao,
hr_all_organization_units_tl haotl
WHERE hao.organization_id = haotl.organization_id
AND haotl.LANGUAGE = userenv('LANG');

When I login to EBS as Japan language session some Forms Application is Eng

Hi ,
have recently applied japan NLS on r121.1 and later upgraded to 12.1.3 also applied 9239090(japan as well).
But customer has complained the error below.
Any ideas on it .
Forms Application is still English.
When I login to EBS as Japan language session, some Forms Application is English.
e.g
user MFG
pass welcome
Resp Manufacturing and Distribution Manager
Path Inventory>品目>品目関連
Thanks

ls: /u100/app/HONDA1/orhonda1/oracle/aphonda1/apps/apps_st/appl/po/12.0.0/forms/JA/POXRQVRQ.fmx: No such file or directoryThis indicates that the fmx file was not generated via adadmin -- Can you upload the adadmin log file here?
and also, after logging into the application selecting japan,to the left side i can see some responsibilities in english still..Is this the normal behaviour.No.
Have you generated all NLS menus via adadmin? If possible, upload the log file.
In the preferences tab when i check,logging to application with english can see the below..
Current Session Language :- American English
Default Session Language :- American English
Is the above correct ?
Do we need to perform any steps to so that we can see the responsibilites in english.Change the session language to Japanese and check then.
Thanks,
Hussein

Open data set for reading excel file on application server in back ground

open data set for reading excel file on application server in back ground

hi Vijay,
I am afraid you won't be able to read from Excel file on Appl. Server.
ec

Setting the item for globalization with application language derived...

Hi guys,
i would like to try translation based on item preference.
I've these settings.
Application Primary Language: italian
Application Language Derived From: item prefercence (english)
I've tested the translation with browser settings and it works.
Now i want to have a fixed language.
How can i specify this item?
For example i want a static global var containing the language called CUR_APP_LAN
Wich value i have to assign to CUR_APP_LAN and where i say to apex that it has to use CUR_APP_LAN for translation?
Thanx a lot.

You have to create an item (application item) named FSP_LANGUAGE_PREFERENCE and set its value to 'it'.
Scott

How to set Date in input field by hard coding in application

Hi all,
1.I have to make a date(its my choice to set the date) to appear in input field which is date type.
2.How to compare two numbers of type decimal. for example greatest of two numbers
urgent requirement

Hi
Check the http://java.sun.com/j2se/1.4.2/docs/api/java/sql/Date.html
http://java.sun.com/j2se/1.4.2/docs/api/java/util/Calendar.html
Sample Code
Date now = new Date();
      DateFormat df = DateFormat.getDateInstance();
      String s = df.format(now);
      System.out.println("Today is " + s);
java.sql.Date descends from java.util.Date, but uses only the year, month and day values. There are two methods to create a Date object. The first uses a Calendar object, setting the year, month and day portions to the desired values. The hour, minute, second and millisecond values must be set to zero. At that point, Calendar.getTime().getTime() is invoked to get the java.util.Date milliseconds. That value is then passed to a java.sql.Date constructor:
    Calendar cal = Calendar.getInstance();
    // set Date portion to January 1, 1970
    cal.set( cal.YEAR, 1970 );
    cal.set( cal.MONTH, cal.JANUARY );
    cal.set( cal.DATE, 1 );
    cal.set( cal.HOUR_OF_DAY, 0 );
    cal.set( cal.MINUTE, 0 );
    cal.set( cal.SECOND, 0 );
    cal.set( cal.MILLISECOND, 0 );
    java.sql.Date jsqlD =
       new java.sql.Date( cal.getTime().getTime() );
The second method is java.sql.Date's valueOf method. valueOf() accepts a String, which must be the date in JDBC time escape format - "yyyy-mm-dd". For example,
    java.sql.Date jsqlD = java.sql.Date.valueOf( "2010-01-31" );
creates a Date object representing January 31, 2010. To use this method with a Calendar object, use:
    java.sql.Date jsqlD = java.sql.Date.valueOf(
            cal.get(cal.YEAR) + ":" +
            cal.get(cal.MONTH) + ":" +
            cal.get(cal.DATE) );
which produces a Date object with the same value as the first example.
Regards
Ayyapparaj

Hyperion Smart Cut Session Issue streaming multiple reports at a time using

This is a lengthly post with details, Please review with Patience:
We are trying to integrate Workspace based web Analysis reports within our intranet portal, thru portlets (made from individual workspace smartcut link), so that users can customize their page as needed, Once they login thru intranet, Cookie is set and passed to succeeding smart cut links via secured http headers. This part is fine, but mainly running into issue with streaming several multiple web-analysis reports at a time,+ we are using Iframe to display and stream multiple individual reports on to one page, but unfortunately all Iframes are sharing one session rather than creating individual session, mostly because of limitation of current web analysis system architecture and IE browser behavior with sessions .
Which Hyperion reporting tool does allow to stream multiple reports at a time? ideally we want to create Iframe of each workspace report so that users can customize and pick portlets as needed. To stream multiple reports at a time.
Problem Description: Hypeiron Web Analsysis, Smart cut reports incorrectly rendering images and intermixing dash boards on POV changes upon multiple reports being diplayed at one time thru Iframe's, issue seem to mostly relate to Hyperion using single session rather to multiple session when displaying several web reports at a time.
Steps Needed To Reproduce:
User logs into workspace.
user click on expolore and able to view the report without any issues.
When right on any of the report and select properties.
Select the SmartCut url and paste it in the Internet explorer.
The webanalysis report opens without any issues.
Similarly user copies the smartcut url for a different report and paste the link on a different tab or new window of same browser.
The report on the first tab gets over written of the report of the second tab of the browser.
The issue happens when two different reports and opened on a browser with multiple tabs. The reports get over written.
Oracle development answer:
In the described scenario opening new browser window does not spawn a separate independent browser session. A new browser window is supplied with URL pointing to the same domain, so all browser cookies including the "ORA_WA_SID" (WA session cookie) are shared between the windows. But multiple application instances cannot run in the same browser session simultaneously because of session sharing. This is not actually a defect, but rather a limitation of current system architecture and browser behavior. And there is no way to fix it programmatically on the product side.

Hi MeHyper,
Your current arrangement puts most of the session handling and persistence on the client. This forces you to accept whatever the client decides to persist and propogate between browser elements (in this case iframes).
My approach would be to:
Consider coding your portlets to manage the sessions. Manage using a somewhat stateless strategy so that each request to the server requires a login and connect, retrieve, and disconnect. Each Iframe should access a different portlet url (or provide a different query) based on its content.
This way, in theory, you can invalidate the sessions and related cookies and update the various report elements independently.
Is smartview out of the question here?
Regards,
Robb Salzmann

How to limit number of sessions for an Application

Hi,
I have an ASO application running on Essbase 7.1.5 version.
This Essbase cube is widely used by the BO ( business objects ) Web I services for retrieving data in there Dash Boards.
No I want to restrict number of sessions on this application. We have SERVERTHREADS through which we can set limit on application wise.
SERVERTHREADS [application] 20;
When I set this in the Essbase config file on this server and bounce the Essbase services. Will this really help me in limiting the session till 20 for this application . I see we can set minimum 20 and maximum 500 using server threads.
What will happen to the session which excceds 20. will they be kept in queue ?.
Pls let me know if this work. Else pls suggest me the best one.
Some information for you – in the Essbase ->properties->statistics-> I see Ports Available are 65531
Thanks
MS

HI,
1. SERVERTHREADS does not contain/limit the count of sessions one can have .
2. Count of ports will help you decide what is the default SERVERTHREAD count , in your case its 20.
3. the count 20 signifies the number of threads which a transaction can use ( here threads are nothing by the operating system level threads, to do with the processes and processor).
4. If you have multiple transactions and you want to improve the performance of them ( in case of slow response or so). You can increase the thread count , to make more threads work for your transactions. Again , this does not limit the count of sessions .
5. I did not understand the obejctive behind limiting the sessions and avoiding users from accessing . I think , this defeats the whole purpose of having cubes then. You have many cubes ,and huge number of users who pull data and essbase and its kernel are capable of handling this . If you still want to restrcit, might as well set their security ( by letting them not to access cubes).
Hope this adds value
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

How do I control a data log session with period and sample time?

I need a data logging system where the operator can select 2 logging parameters: Log Period and Sample Time. I also need a START and STOP button to control the logging session. For example, set the log period for 1 hour and the sampling time for 1 second. (I may be using the wrong jargon here.) In this case when the START button is clicked, the system starts logging for 1 second. An hour later, it logs data for another second, and so on until the operator clicks the STOP button. (I will also include a time limit so the logging session will automatically stop after a certain amount of time has elapsed.)
It’s important that when the STOP button is clicked, that the system promptly stops logging. I cannot have the operator wait for up to an hour.
Note that a logging session could last for several days. The application here involves a ship towing a barge at sea where they want to monitor and data log tow line tension. While the system is logging, I need the graph X-axis (autoscaled) to show the date and time. (I’m having trouble getting the graph to show the correct date and time.) For this application, I also need the system to promptly start data logging at a continuous high rate during alarm conditions.
Of course I need to archive the data and retrieve it later for analysis. I think this part I can handle.
Please make a recommendation for program control and provide sample code if you can. It’s the program control concepts that I think I mostly need help here. I also wish to use the Strip Chart Update Mode so the operator can easily view the entire logging session.
DAQ Hardware: Not Selected Yet
LabVIEW Version: 6.1 (Feel free to recommend a v7 solution because I need to soon get it anyway.)
Operating System: Win 2000
In summary:
How do I control a graphing (data log) session for both period and sample time?
How do I stop the session without having to wait for the period to end?
How do I automatically interrupt and control a session during alarm conditions?
Does it make a difference if there is more than one graph (or chart) involved where there are variable sample rates?
Thanks,
Dave

Hello Dave,
Sounds like you have quite the system to set up here. It doesn�t look like you are doing anything terribly complicated. You should be able to modify different examples for the different parts of your application. Examples are always the best place to start.
For analog input, the �Cont Acq&Chart (buffered).vi� example is a great place to start. You can set the scan rate (scans/second) and how many different input channels you want to acquire. This example has its own stop button; it should be a simple matter to add a manual start button. To manually set how long the application runs, you could add a 100 ms delay to each iteration of the while loop (recommended anyway to allow processor to multi-task) and add a control that sets the number
of iterations of the while loop.
For logging data, a great example is the �Cont Acq to File (binary).vi� example.
For different sample rate for different input lines, you could use two parallel loops both running the first example mentioned above. The data would not be able to be displayed on the same graph, however.
If you have more specific questions about any of the different parts of your application, let me know and I�ll b happy to look further into it.
Have a nice day!
Robert M
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments

How to insert system date in Session of the page

Greetings,
I am stuck at one thing and need guidline.
I created date parameter "From Date" - "to Date" . Item Type Date Picker.
- Set Default Value : Sysdate;
- Default Value Type : PL/SQL Expression.
When i run the page it shows current date , but when i see session state report of that page there Item Value is Empty and Status is also Empty.
The result in impact is that i created linked on data that displays, That link doesnt Work because of Item Value is Empty and Status is also Empty.
Kindly guide how i inserted value in Item Value and in status.
Pls

Hi,
>
I am stuck at one thing and need guidline.
I created date parameter "From Date" - "to Date" . Item Type Date Picker.
- Set Default Value : Sysdate;
- Default Value Type : PL/SQL Expression.
When i run the page it shows current date , but when i see session state report of that page there Item Value is Empty and Status is also Empty.
The result in impact is that i created linked on data that displays, That link doesnt Work because of Item Value is Empty and Status is also Empty.
Kindly guide how i inserted value in Item Value and in status.
>
When you set the value of an item in the source, the value is set in the HTML DOM not the session state.
To set value in session state use Computation or Process.
Cheers,

How to set a busy cursor when the excel report pops-up(in Excel)?

I'm using LabVIEW 7.1 and Report Generation Toolkit for MS Office to build a VI. at the end of each session when the data in a certain peroid of time was collected, the data will be transmmited to Excel report. the problem is during the poping-up of Excel report, if the cursor clicks inside Excel accidently, all the collected data will disappear and the blanks in Excel will no longer be filled automatically. I have tried to use Set Busy.vi, but it only works in VI panel, not in Excel. Will someone please help me?
thanks very much

Hi jingli,
For changing cursor appearance, you can visit another post on the forum:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000272E0000&ECategory=LabVIEW.LabVIEW+General
(search for mouse pointer appearance in this forum if the URL doesn't work)
Another suggestion would be setting the windows appearance to "minimum" when you open your Excel report (wire it at the New Report VI).
Dan

UTF8 character set conversion for chinese Language

Hi friends,
Would like to some basic explanation on UTF8 feature,what does it help while converting the data from chinese language.
Would like to know what all characters this UTF8 will not support while converting from chinese language.
Thanks & Regards
Ramya Nomula

Not exactly sure what you are looking for, but on MetaLink, there are numerous detailed papers on NLS character sets, conversions, etc.
Bottom line is that for traditional Chinese characters (since they are more complicated), they require 4 bytes to store the characters (such as UTF-8, and AL32UTF8). Some mid-eastern characters sets also fall in this category.
Do a google search on "utf8 al32utf8 difference", and you will get some good explanations.
e.g., http://decipherinfosys.wordpress.com/2007/01/28/difference-between-utf8-and-al32utf8-character-sets-in-oracle/
Recently, one of our clients had a question on the differences between these two character sets since they were in the process of making their application global. In an upcoming whitepaper, we will discuss in detail what it takes (from a RDBMS perspective) to address localization and globalization issues. As far as these two character sets go in Oracle, the only difference between AL32UTF8 and UTF8 character sets is that AL32UTF8 stores characters beyond U+FFFF as four bytes (exactly as Unicode defines UTF-8). Oracle’s “UTF8” stores these characters as a sequence of two UTF-16 surrogate characters encoded using UTF-8 (or six bytes per character). Besides this storage difference, another difference is better support for supplementary characters in AL32UTF8 character set.
You may also consider posting your question on the Globalization Suport forum which pertains more to these types of questions.
Globalization Support

Set value for textarea field in tabular report

Hi all,
I need some help setting textarea values in a tabular report. The tabular report is for users to be able to build their own ad hoc report, by specifying which columns should be included and filtered. Here are the example tables:
-- Table that holds all of the data for the report.
create table vehicle (
make varchar2(50),
model varchar2(50),
type varchar2(50),
year number);
insert into vehicle values ('Toyota','Camry','Sedan','2008');
insert into vehicle values ('Toyota','4Runner','SUV','2008');
insert into vehicle values ('Honda','Civic','Compact','2011');
insert into vehicle values ('Honda','Accord','Sedan','2010');
insert into vehicle values ('Ford','F150','Truck','2011');
-- Table that holds the columns that are available to be filtered in report.
create table vehicle_cols (
col_id varchar2(50),
col_label varchar2(50));
insert into vehicle_cols values ('make','Vehicle Make');
insert into vehicle_cols values ('model','Vehicle Model');
insert into vehicle_cols values ('type','Vehicle Type');
insert into vehicle_cols values ('year','Vehicle Year');
-- Table that holds filters saved by user.
create table vehicle_user_saved (
saved_rpt_name varchar2(50),
col_id varchar2(50),
col_value varchar2(50));
insert into vehicle_user_saved values ('Saved Report One','make','Toyota');
insert into vehicle_user_saved values ('Saved Report One','make','Honda');
insert into vehicle_user_saved values ('Saved Report One','model','Sedan');
insert into vehicle_user_saved values ('Saved Report Two','make','Honda');
insert into vehicle_user_saved values ('Saved Report Two','year',2010);And below is the source query for the region. The textarea value is initially set to null.
-- Region Source for specifying query parameters.
select
col_label,
apex_item.checkbox(1,'#ROWNUM#','CHECKED') as include_cols,
apex_item.hidden(2,col_id)
|| apex_item.textarea(3,null,2,100) as filter_cols
from
vehicle_cols;When a user clicks the button to load the parameters for a report they have previously saved, I'd like to change the values in the textarea field from null to the saved values from the vehicle_user_saved table so the user can see the parameters and run the report, or modify the parameters if necessary.
I thought I could run a PL/SQL process (After Footer) when the button is clicked to populate these textarea fields, but the test below doesn't do anything:
begin
apex_application.g_f03(1) := 'Hello';
end;For example, when a user selects to load "Saved Report One," the following parameters should be loaded into the textarea fields:
Column >> Filtered Columns
Vehicle Make >> Honda, Toyota
Vehicle Model >> Sedan
Vehicle Year >> Null
Vehicle Type >> NullCan someone help me out? I wouldn't think I need Ajax for this since it's ok to be processed after the button click. But if I do need to use Ajax, I definitely could use some help with it, as I've never used Ajax before. I've setup this example in my hosted account to help.
Site: http://apex.oracle.com
Workspace: MYHOSTACCT
Username: DEVUSER1
Password: MYDEVACCT
Application: report parameters
Thanks in advance!
Mark
APEX 4.1, Oracle 11g

Hi, thanks for your response.
I'm not adding any new rows, I'm just trying to change the values of the textarea fields in the tabular report when the user chooses to load his/her saved parameters. The default for the textarea field in all rows is null, because I assume users will want to start building the report from scratch. However, when the user clicks the button to load his/her saved values, I want to overwrite the null values with new values. How can I do that?
Thanks,
Mark

Setting date format for the entire SQL Server installation - SQL Server 2008 R2-2012

Hi,
I need to safeguard the behaviour of SQL codes that inserting into SQL tables with some date columns. For this purpose, I need to change the date format for the SQL instance and not using CONVERT and CAST.
I've seen the SET DATE FORMAT statement, but if I use it, could I solve my problem?
Thanks

The language setting is related to the database user.
BOL: "DEFAULT_LANGUAGE = { NONE | <lcid> | <language name> | <language alias> }
Specifies the default language for the new user. If a default language is specified for the user and the default language of the database is later changed, the users default language remains as specified.
If no default language is specified, the default language for the user will be the default language of the database. If the default language for the user is not specified and the default language of the database is later changed, the default
language of the user will change to the new default language for the database."
LINK: http://technet.microsoft.com/en-us/library/ms173463.aspx
The default language setting can be overridden by SET LANGUAGE for the session:
http://technet.microsoft.com/en-us/library/ms174398.aspx
Example:
SET LANGUAGE us_english; -- mdy
SELECT CAST ('12/13/2014' as DATE); -- 2014-12-13
GO
SET LANGUAGE british; -- dmy
SELECT CAST ('12/13/2014' as DATE);
GO
(1 row(s) affected)
Changed language setting to British.
Msg 241, Level 16, State 1, Line 2
Conversion failed when converting date and/or time from character string.
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Configuring Date format across a JSF application

Hi,
I know there's a way to use a date-time converter on a Date accessor on a backing bean, such as below..
<h:outputText value="#{bean.dateInstance}">
<f:convertDateTime type="both"/>
</h:outputText>.. but is there a way to format dates consistently across the entire application? Does anybody know what is the default converter for Date's? I haven't done much research into it... I know you can create a custom converter to convert all objects of a certain class, but I assume there's already a default one for Dates that could just be configured to use a certain date pattern?
Thanks in advance,
James

If your script does not have explicit TO_DATE conversions (which it should, by the way), like:
insert into t values (to_date('11/21/2002', 'mm/dd/yyyy'));then you can set the default date format to match the format in your script. So, if your script looks like:
insert into t values ('11/21/2002');then:
alter session set nls_date_format = 'mm/dd/yyyy';prior to running the script.

Set date to session language in Application report

Similar Messages

Maybe you are looking for