Set notifications when the time defined in Service Level SLA is exceeded

Hello everyone,
I am looking for ways how to in OSM set a time - service level (*SLA*) for each function of the orchestration.
If time is exceeded for each function, Make a notification to an external system.
You can do things like this at Order and Task Levels, but I do not know how to do this at the level of each function.
Does anyone know how I could solve this issue.
Best Regards,
David Alejandro Leon H.

Hi David,
you have the option of defining a jeopardy on the order based on the expected process duration, which is an attribute of each process.
Go to Order editor, jeopardy tab, conditions and check the third checkbox and leave the first radio button below. Then you would set the desired duration on the process executing your component. You could also link an automator to the notification and do whatever you want.
Now the problem is the Design studio does not let you set the expected duration for a process through the process editor nistead it populates 86400 seconds every time, but if you open the file in the Package Explorer view, you should be able to modify this by editing the file (haven't tested it though), but I believe it should deploy and once it is in the DB model, it should work since this is old 6.3 functionality. Try it andd let me know!
I believe you could even create an SR for the fact the DS does not alloow to set the duration on a process on the grounds of missing functionality which was previously available, unless it was officially deprecated (I am not aware of that), or, unless there is a way to do this with the Studio of which I am not aware.
If this does not work for whatever reason the only way I can think of is declaring the jeopardy notification on the Order and linking a custom rule created for the purpose which would need to be a sql based rule where the PL / SQL would evaluate the duration of the process executing your function. Would be a bit of coding, but I believe you could make it work.
Viktor

Similar Messages

  • What happens when the Time Machine drive is full?

    I'm on my second iMac. My first one (G5, 1984) died, and I replaced it early 2010 with an Intel mac. The transition when exceedingly well largely due to Time Machine. I just hooked the Time Machine drive to the new system, and I was soon back up running!
    My home folder has 70GB of data. The Macintosh drive has 105GB of data and 395GB free. The Time Machine drive has 220GB used and 30GB free.
    1. What happens when the Time Machine drive is full?
    2. Do I have control over what backups get deleted?
    3. If lightning strikes twice, will I still be able to restore my Intel mac like my G5 mac, even if backups get deleted?
    4. Is there anyway to control what backups/backup files get deleted?
    5. Any other thoughts?
    Thanks.

    maxseven wrote:
    i have deleted the time machine folders and they are now in my trash. when i try to secure empty my trash it will delete everything but the t/m folders. how do i delete them?
    Do you mean all of them? The entire Backups.backupdb folder?
    That's a large mess. First, even a normal delete will take a very long time, as there are probably hundreds of thousands, or even millions, of files. Your best bet by far is to simply erase them with Disk Utility -- that will only take a few moments. If your TM drive has a single partition, see #1 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html]. If there are other partition(s) on the drive, see #2 there.
    If not, and you only deleted some of the folders, you have a different, worse problem. Unfortunately, Apple doesn't do a very good job of warning folks: +*Never move, change, or delete anything in your backups via the Finder or Terminal.+*
    You shouldn't have to delete backups at all, since Time Machine will do that automatically when the disk/partition gets full. But you can do it without harm via Time Machine. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    A normal delete will take a very long time, as there are probably tens or hundreds of thousands of items, each of which must be individually deleted. A secure delete will take much, much longer, as each deleted file must be overwritten with zeros.

  • What will happen when the time come?

    I have upgrade eligibility so when the time come iphone will be available on the list of phones that I'm eligible for upgrade? Is the iphone just gonna appear on the list of phones to purchase on the website?

    Login into MY Verizon....go to your upgrade line, and you will see i buy iphone button... 

  • If I have forgotten my security questions and am not given the option to send them to an alternate email address because I didn't have one set up at the time, how can I get passed this point? I'm sure I'm blocked out at this time from trying.

    I cannot remember my security questions and I am not given the option to send to an alternate email address because I didn't have one set up at the time.  How can I get past this point?

    See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    Or Here  >  Apple  Support  iTunes Store  Contact

  • If I send a text during a time restriction, will my phone re-send the text when the time restriction is over?

    In the family share program, I put a time restraint on my phone so that I couldn't use it during a certain period of time. If I attempt to send a text message during that time, the message won't be sent. But when the time restriction is ended and my phone is unlocked, will that message automatically try again? Or will I have to write and send a new message?

        That is a great question lsellnow! Messages are not save for later delivery. You will have to rewrite your message when the line is not under any restriction.
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

  • In 12c OEM where can I set the notification when the Agent is down.

    Hello Experts,
    In 10g OEM environment , while creating the notification rule , we have a tab "availablity" which has the option to choose for the Agent target availability.
    But while creating a rule in the 12c , I didn't find that kind of option. So, how can I enable my self to alerted for the agent nonavailability.
    Thanks,
    Naveen kumar

    EM12c has an entirely different set up for notifications. You would configure this under the Setup menu by selecting Incidents, followed by Incident Rules.
    Within Incident Rules you should see a couple default Oracle-provided incident rulesets. I created an additional ruleset (priority 3, after the default rulesets) that contains various rules, each rule matching a type of incident for which I want to receive notification.
    Specifically for the "agent down" situation, my rule is set up as:
    Target Type is Agent
    Status in (Closed; New)
    Category is Availability
    Then you specify actions to occur when the rule gets triggered -- I've specified the action to email my EM administrator login, which is configured with my email address.

  • Previously I had my account set up so both my daughter and I got a text notification when the bill was due. I made changes in our plan and now we no longer receive alerts that the payment is due. How can I get this back?

    Previously my account was set up so my daughter and I got texts when the bill was due. I recently made some changes in our plan and now this is gone. How do I get this back?

    Sorry, without knowing the Apple ID/Password that was originally used to activate this phone, then there is no way to re-activate it, as you've found out.
    Apple can't/won't help you. Your choice is to get this info, or you simply won't be able to re-activate this phone.
    If you ex won't give it to you, then consult a lawyer.

  • Estimated Start time in notification based on Time defined in Work center

    Hi,
    Following Satish post- I am trying to find solution to the same  problem so i will appreciate any advise.
    When the notification is created ,the estimated start time should be based on priority .This in iteslf is pretty straight & simple. However if the reported time is after work hours or towards the end of work hours or weekends , the estimated start time should be reflected accordingly based on factory calender & work center time schedule.
    In other words the estimated start time should fall within the window of work hours available.
    Example:
    Presume the the working hours for the Organization are 8:00AM to 5:00 PM & a call comes for service at 4:00 PM. Also say , for high priority the defined response time is 5 hours. In such a instance the estimated start date should be set to next day at 11:00 AM.
    Appreciate your help for the configuration that need to be done
    Shirly

    Hi,
          I think ur talking about notification malfunction start time .. currently it just takes the system date and time by default .. and if you need work center timings i believe first u need the eqpt /F.loc to get the work center data in notificaiton ...
    I think u can get these dates can be modified while saving by using user exit  : QQMA0014 QM/PM/SM: Checks before saving a notification or BADI   IF_EX_NOTIF_EVENT_SAVE , but at the same time the eqpt or F.loc have work center details in master record ...or work center needs to be entered manually in notification ..., pls check up ..
    regrds
    pushpa

  • Time Picker defaults time to 7:00 when the time is deleted

    I have a Lightswitch 2013 desktop silverlight application with a datetime field (not required) but I only use the time portion of the field.  I have a screen with a Time Picker on it and when the user deletes the time the system puts 7:00 am in the
    field.  This only happens in the published application when I debug if I delete the time the time picker is left blank but when looking at the change event the field is changed to the current date with a time of 7:00 AM.  If the time was midnight
    I could at least do some validation and make the field null.  Any ideas why this is happening and how to fix, ideally make the field null but at least make the field midnight.
    Becky

    I need to clarify this bug, when you delete the time the time is immediately changed back to the original time it doesn't matter what time the original time was.  Also the record is not flagged as dirty which means the change event doesn't fire.
    As for the UTC we are on Pacific Standard time so there is an 8 hour difference.  I did some testing and if I the screen says 8:00 am the local time is 12:00 am which is correct, but I don't think it is related to UTC good catch though.
    I've tried the validation and the field can be null, the only way I can get it to change to null is to change the time to some specific value (say midnight) then set it to null in the change event.  This works just fine until someone really needs to
    set the time to midnight.
    Thanks for the idea's I really appreciate it.
    Becky

  • Notification when the stage is vissible on the screen

    Hi all,
    I'm creating a JavaFx application which is a client application that interacts with an server. I created a preloader like scene which shows the progress (with a progress bar) when the application receives a broadcast from the server with server location, application initialization and when started for the first time the user must give a client name. I do not use the preloader interface because it seems to be discarded on the raspberry pi (correct me if i'm wrong, but i'm using a log file and nothing is written to the file from the preloader i created before this attempt).
    This all works fine, user can do input, and when te client starts for the second time and later, the client automaticaly logs in. When i start this client on my development machine i see the preloader scene starting from the beginning. But when i start the same application on the raspberry pi (which offcourse is a LOT slower), the preloader scene is not earlier visible then when:
    - The client receives the broadcast from the server after 4/5 seconds, because the application is then in a "wait" state.
    - Or when the broadcast is recieved quite fast, when there is user input needed,
    - When the broadcast is recieved quite fast and there is no user input needed, i rarely see the preloader scene appearing.
    I've understand that there is a main FX thread for graphical actions and there are you're own threads etc... I have the following code to start the application initialization progress when the preloader scene comes visible in my application start method:
        public void start(Stage primaryStage) {
            redirectOutputToLog();
            rootStage = primaryStage;
            rootStage.setTitle("PiDome Client");
            rootStage.setFullScreen(true);
            rootStage.initStyle(StageStyle.UNDECORATED);
            rootStage.addEventHandler(WindowEvent.WINDOW_SHOWN, new EventHandler<WindowEvent>(){
                @Override
                public void handle(WindowEvent window){
                    if(preloaderShown==false){
                        mainStage = new MainScene();
                        mainStage.setRoot(rootStage);
            ready.addListener(new ChangeListener<Boolean>(){
                @Override
                public void changed(
                    ObservableValue<? extends Boolean> ov, Boolean t, Boolean t1) {
                        if (Boolean.TRUE.equals(t1)) {
                            rootStage.setScene(mainStage.scene());
                            ////rootStage.sizeToScene();
                            Networking.removeEventListener(me);
                            ClientData.removeClientDataConnectionListener(me);
                            ClientData.removeClientLoggedInConnectionListener(me);
                            Domotics.removeDomoticsListener(me);
            preloader = new PidomeClientPreloader(rootStage);
            rootStage.show();
            preloaderShown = true;
            initialize();
    The constructor of the PidomeClientPreloader is creating the preloader scene and puts all the items on the scene as needed. When the preloader is done initializing the rootStage is shown. But as mentioned on the raspberry pi, the event WINDOW_SHOWN seems to be fired before the scene is graphical visible. I'm not using Platform.Runlater in my preloader code (only in one update function to update the progress bar from background threads).
    Is there a way to have a absolute way of determining when a scene is really visible, or is this as far as i can get because the FX thread is always running behind?
    Thnx in advance,
    John.

    There are four general causes of this issue:
    1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
    2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
    3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
    4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
    (66725)

  • Can I stop SMS notification when the iPhone is being used as a phone?

    I love my iPhone, but the one thing that is driving me mad is SMS notifications coming through when I'm talking on the phone - a startling loud alert when the phone is pressed hard against my ear makes me jump every time, and actually hurts a bit too! I don't want to have my SMS alerts as silent, I'd just like the phone to realise that shouting 'PING!' in my ear when I'm on the phone is not good for my hearing or nerves!

  • How to not get notifications when the iOS app is closed

    I don't know if this is for everyone or just me. When I double click the home button and close skype I still get's messages. This is so annoying, I'm in a big group chat so I almost always get's messages. And turning on bussy doesn't work either or turning on sleep mode (sometimes sleep mode works). The only thing that has been working is turning on offline. I think this is really bad, just turning off the app should work. So does this this tace celuar network even when the app is closed? That truly SUCKS! I love the app othewise. Please fix this. I've a iPhone 5s

    Hi Krrrishna,
    >>How do I show all the toast messages received when the application was closed and when user clicks any on one of the toast message ? If that is not possible what is the workaround I can use so that I wont miss any of those messages ?
    In my experience, there is no direct way to handle multiple messages in the same time.
    If I'm not misunderstanding, I think you want to make a Message app, as a workaround, I think you can pull message data from your Mobile Service can display them in your Messages page, this is more like build-in message app.
    About using offline data sync in Mobile Services, see
    http://azure.microsoft.com/en-us/documentation/articles/mobile-services-windows-phone-get-started-offline-data/
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • No badge alert on setting icon when the new ios update is released

    Hi all,
    I use iphone 5. I found that a badge is not shown on the setting icon when a new ios update is released. Only way letting me know that there is an update is manual check update, i.e. go to setting->general->software update. I think, normally, the badge should present automatically on the setting icon everytime the update is released. Does anyone find this problem? How to solve this?
    Thanks,

    I have the exact same problem. Been searching Google for answers but have found none :-(
    I upgraded from an iPhone 4s to 5 recently. I had the Settings badge show up right after I got the phone, but after I got home and did a restore from backup to get my 4s stuff over to the 5, then no more badge notification.
    I can't find any settings anywhere to help with this.
    Anybody got any suggestions/thoughts/fixes/etc?

  • The Error Message in Tax Code determination Set up At the time of updation

    When I update the taxcode in the Valid Period-Setup Form Taxcode determination Forms of the SAP, an error message occur "THE COMBINATION OF KEY FIELDS CANNOT BE DUPLICATED" in the status bar at the time of Update button pressed.what is the reason for this error message? how can I overcome the above error msg and update the taxcode ?

    What is your B1 version and PL? You may check this: Re: Problem related to the Cenvat Tax Code
    Thanks,
    Gordon

  • Error at the time of Terminating Service Contract

    Getting the following error at the time of terminating the contract in Oracle Service Contracts Module.
    OKC_CONTRACTS_REQUIRED_VALUE(COL_NAME=QP CALL FAILURE Routine"QP_PREQ_GRP.INSERT_LINE_ATTRS2 ORA-01400: cannot insert
    NULL into ("QP".QP_PREQ_LINE_ATTRS_TMP_T"."VALUE_FROM"))
    Thanks in advance.
    Ram

    Hi Friends,
    Is it that we can only have one no. range for service entry sheet even if there are 2 different company code in the same client.
    Regards,
    Wasim.

Maybe you are looking for