Set PPT dimension to fit to the Captivate resolution

Hi,
I am working with Captivate 4.
My project's resolution is 1013x584 pixels.
I need to import PPT slides to the project.
I changed the PPT slides to the same resolution as the captivate project but still when I import the slides I get the following message:
(In case it is not clear the message is that the dimensions of the PPT presentation differ from the chosen captivate project size.).
I thought that by setting the slides size to the same size as captivate the problem will be solved but I guess I am not doing something right.
Any ideas?
Thanks,
Merav.

Hello,
When you refer to the resolution: do you mean the total size only or also the ppi. Think that the ppi-settings are different (72 vrs 96)?
Lilybiri

Similar Messages

I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive?

I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive in Iphoto?

Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Where did the print setting "Rewrap message to fit" go in Mail 7?

Where did the print setting "Rewrap message to fit" go in Mail 7?
All text prints too small. Settings for font size haven't changed and the emails print out much smaller than the view settings.
I don't see the options for "Rewrap message to fit" or "Keep fonts the same size".
Suggestions?

I have the same problem. Text and the info with the "To" header all prints very small. I also cannot find the controls described. Just updated to Mavericks, never had problem before this. Same printer, and problem also occurs on another different model printer I tried for a test.
Mail ver 7.2
OSX 10.9.2
Please help !

With the new iOS 7 update when I go to set a pic as my wallpaper it will not adjust the size like before so it fits to the screen. How can I get it too

With the new update when I got to set a photo it won't let the pic to shrink to fit to the screen even though I try it just stays big. How can I get it to shrink down

See this Apple Best Practices Guide, about half way down the page:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
It gives the recommend procedure.
MtD

What size (dimensions and ppi) images sould I make so they fit into the 9 x 11.25 ibook?

What size (dimensions and ppi) images sould I make in Photo Shop so they fit into the 9 x 11.25 ibook? (I am a professional photographer who captures in RAW).
I have sent a number of sizes to iPhoto for use in an iBook and they all are too big for the software so I get cropped images even when zoom slider is at it's smallest.
This is very frustrating. I am on a dealine. Please help.
John

Is your question about a printed book? If so, you likely want to redirect your question to either the iPhoto or Apertuare forums, depending on the software you'll be using to submit your book for printing to Apple.
This forum is actually focussed on the iBooks application for reading (and creating) electronic books for Apple's iOS devices such as the iPad, iPhone, and iPod Touch.
Good luck!

Some of the pictures I am trying to use don't quite fit into the pre-set frames... Is there a way to move just the photo with-in the frame so to use the best part of the picture?

Some of the pictures I am trying to use in Idvd don't quite fit into the specified frame... Is there a way to just move the picture itself within the frame to use the best part of the pic... For example I'm trying to use a picture of my son..but his head gets cut off when I drag the picture into the place holder....

When trying to troubleshoot my problem I discovered a forum that was saying certain NTFS drives work just fine
Apple support says that an NTFS or exFAT drive cannot be used when connected to the AirPort Extreme.
I suppose it is possible that someone might have been using some type of special software on the drive that might perform a "conversion", but without more details, it is hard to know.
Note: ExFAT and NTFS formats aren't supported.
http://support.apple.com/kb/HT2426

Cannot set up an alias on iCloud? have followed the instructions. It will not allow my new alias name which fits inbetween the specified no of characters?

I am having problems creating a new alias in my iCloud.
I have followed the instructions to the letter.
It does not accept my new alias name which fits in the prerequisite number of characters?

Post in the iCloud forum area.

My Olympic camera SD card doesn't fit into the SD card camera reader. Apple advised me to purchase the product in order to import photos to my IPad.

My Olympic camera SD card doesn't fit into the SD card camera reader. Apple advised me to purchase the product in order to import photos to my IPad. How do I over ride this problem. How do I import photos from an Olympus FE-340 directly to my IPad?

Your camera uses an OLympic XD picture card http://www.amazon.com/Olympus-xD-Picture-Memory-202332-package/dp/B002LC2DQ4/ref =pd_sim_sbs_p_1 This card has different dimensions compared to an SD card.
You should be able to plug the cable that came with your camera into the camera connection kit to import the pics.
 Cheers, Tom

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most proje

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most projectors in auditoriums that I will be using have 1024 x 1200 pixels, and possibly 1600 x 1200. There is no reference to this issue in the Keynote Tutorial supplied by Apple, and I have never found a definitive answer to this issue online (although there may be one).
Here’s my question: When scanning my photographic slides, what setting, from 72 dpi to 300 dpi, would result in the best image quality and use up the most efficient amount of space?
Here’s what two different photo slide scanning service suppliers have told me:
Supplier No. 1 tells me that they can scan slides to a size of 1544 x 1024 pixels, at 72 dpi, which will be 763 KB, and they refer to this as low resolution (a JPEG). However, I noticed when I looked at these scanned slides, the size of the slides varied, with a maximum of 1.8 MB. This supplier says that the dpi doesn’t matter when it comes to the quality of the final digital image, that it is the dimensions that matter. They say that if they scanned a slide to a higher resolution (2048 x 3072), they would still scan it at 72 dpi.
Supplier No. 2: They tell me that in order to have a high quality image made from a photographic slide (starting with a 35 mm slide, in all cases), I need to have a “1280 pixel dimension slide, a JPEG, at 300 dpi, that is 8 MB per image.” However, this supplier also offers, on its list of services, a “Standard Resolution JPEG (4MB file/image – 3088 x 2048), as well as a “High Resolution JPEG (8 MB file/image – 3088x2048).
I will be presenting my Keynotes with my MacBook Pro, and will not have a chance to try out the presentations in advance, since the lecture location is far from my home, so that is not an option.
I do not want to use up more memory than necessary on my laptop. I also want to have the best quality image.
One more question: When scanning images myself, on my own scanner, for my Keynote presentations, would I be better off scanning them as JPEGs or TIFFs? I have been told that a TIFF is better because it is less compressed.
Any enlightenment on this subject would be appreciated.
Thank you.

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

How to I get access to the Captivate object in javascript within an HTML file?

I'm still struggling with this and would really appreciate any help/guidance you can .
here's what I've got right now:
var g_bIsInternetExplorer = navigator.appName.indexOf("Microsoft") != -1;
document.write("<P><H1> g_bIsInternetExplorer=" + g_bIsInternetExplorer + "</H1></P>");
document.write("<P><H1> setting objCP....</H1></P>");
var objCp = g_bIsInternetExplorer ? Captivate : document.Captivate;
document.write("<P><H1> set objCP....</H1></P>");
var description = objCp.cpEIGetValue("m_VarHandle.cpInfoDescription");
document.write("<P><H1> description=" + description + "</H1></P>");
I've published the captivate project.. I then launch it and then launch the html file that has this code in it
It does everyting up thru and including line 3
But it seems to fail on line 4..
Any ideas /suggestions?
Thanks in advance.

Hey Jim - thank you thank you thank you
Here's what was up with my code:
This worked:
alert("about to set objCP...");
var objCp = document.Captivate;
alert("completed setting of objCP, about to set get cpInfoDescription...");
var description = objCp.cpEIGetValue("m_VarHandle.cpInfoDescription");
alert("description=" + description);
This did NOT work:
document.write("<P><H1> AT BEGINNING </H1></P>");
alert("about to set objCP...");
var objCp = document.Captivate;
alert("completed setting of objCP, about to set get cpInfoDescription...");
var description = objCp.cpEIGetValue("m_VarHandle.cpInfoDescription");
alert("description=" + description);
====
I'm guessing the 2nd didn't work because i tried to get the captivate object AFTER the script wrote something to an HTML file. I'm ultimately trying to get Captivate to generate a report for the user to report out what they did in response to the various quiz questions in the course (in HTML in table). I've posted a query on how to do this here: http://forums.adobe.com/message/5120417#5120417
Any chance you could take a look at this posting and let me know your thoughts on how best to do this .. It seems like this would be a fairly common thing to do .. It comes stock in Articulate Storyline (through their 'Report.HTML') but I haven't found a comparable one in Captivate.
Thanks again!
tom.

Two Fact tables with Different set of Dimension Tables

Here is my scenario:
I got two fact tables: X and Y (actually, they are the same tables, but with different level of data)
and four dimension tables: A, B, C, D
X joins relationship to all dimensions (A, B, C, D).
Y joins relationship to only A, B, C, but no D.
When I select dimension A, B and C together with fact tables X and Y in BI Answer, result is displayed and compared.
However, if I select dimension D together with fact tables X and Y, only data from fact table X is displayed. There is no result displayed for fact table Y. I know that this is because fact table Y does not join to dimension D.
If the above relationship unchanged, how can I display both X and Y's result in BI Answer when dimension D is selected?

Thanks for all your replies.
Actually, I've tried the solutions you guys mentioned. Generally speaking, the result should be displayed. However, my scenario is a little bit tricky.
table Y's figures are not the aggregation of table X for D dimension. Instead, table Y's figures include not only D dimension total, but also others (others do not mean A, B, C dimension). For example, table Y stores all food's figure, while table X stores only drink's figure. D dimension is only about drink's detail. In my scenario, other foods' figure is not provided.
So, even if I set D dimension to all/total for table X, table X's result is still not the same as table Y.
Indeed, table Y does not have a column key to join to D dimension's key. So, if I select D dimension and table Y's measures at the same time in BI Answer, result returns no data. Hence, I can't compare table X and table Y's results with selection of D dimension.
Is there any solution to solve this problem?
Edited by: TomChan on Jun 3, 2009 9:36 AM

Why my form doesn't fit in the navigator window?

Why my form doesn't fit in the navigator window?.
When I execute the form from navigator the form appears in but the size is less than the size of the explorer and shows shows vertical and horizontal scrollbars. What can I do to avoid this?, Is there any solution different than modify all my forms?, Is there any way to configure my navigator?
Sorry if I'm slighty off topic

We also faced this problem but now we have made changes in formsweb.cfg file by setting SeprateScreen=true value and restarting form server.
This will open forms in new window instead of same.
I hope this will work for you also.

I am having difficulty including text with iPhotos I want to share through email. I get a red exclamation mark along with a statement stating that the text doesn't fit into the designated text area. This is so frustrating.

I am having difficulty including text with iPhotos I want to share through email. I get a red exclamation mark along with a statement stating that the text doesn't fit into the designated text area. This is so frustrating. Before iLire11 I was easily able to share photos with email messages. Arghhhh!

In the iPhoto preferences you can set Apple Mail as your e-mail client and then it will work exactly as before
LN

After the new project by importing PPT release, how to achieve the release of the demo mode SWF, but not now only Click to continue?

After the new project by importing PPT release, how to achieve the release of the demo mode SWF, but not now only Click to continue?
Note：Captivate 5.5
Thks

通过导入PPT新建的项目发布后,如何实现发布演示模式的SWF（自动播放）,而不是交互模式的SWF（只能点击才能继续）？

Changes in the Dimensions not reflected in the Current View and Excel Sheet

Hi Experts,
We're using BPC MS Platform Version 7.0.112 and we're having problems. When we make changes in the dimension members like adding members or making changes in the hierarchy or groupings, it takes time for the changes to reflect in current view or in the excel sheet. After full processing of the dimension we can see the changes we've made when we reopen the dimension member but when we try to use the member we've added in the template, it's not yet in the current view. I've already tried, full processing of all the dimensions, processing application and reassigning aql index, refresh dimension members and yet the changes we've made doesnt appear in the current view. And what's odd is that sometimes the changes we've made would appear after a day or two or nothing at all.
What could be possibly causing this issue?
Thanks,
Marvin

Hi Dzmitry,
Thanks for your response, I'm just wondering whats causing this? We never had this issue on older versions of BPC though, so it would really help if we would know the cause of this. Basicaly when do changes in a dimension, after processing (Full Process, System Offline and Process through member sheet), we just had to set the AppSet status to available and refresh the dimension members in Excel and all the changes would already be visible.
Thanks,
Marvin

Set PPT dimension to fit to the Captivate resolution

Similar Messages

Maybe you are looking for