Set range selection on a clip using "X" not working!

So I just downloaded FCPX this afternoon and am trying to select a range on a clip in the Event Browser to then drag that selection down to the Timeline. On a 20 second clip, I press the "I" at 7 seconds in, then I press "O" at 14 seconds. That's the part of the clip I want. So then the FCPX Online User Guide tells me to do this:
In the Event Browser or the Timeline, move the skimmer (or the playhead) over a clip and press X.
Final Cut Pro sets the range selection start and end points at the clip start and end points.
Note: To use this X key method with connected clips or clips in a connected storyline, move the pointer directly over the clip and press X.
BUT, when I press X, it discards my "I" and "O" points and puts the yellow selection box around the entire clip again! It's very frustrating. Please help me, what am I doing wrong, or is this a bug? I'm up against a deadline and this is preventing me from moving forward because it won't "store" or remember, I don't know what to call it, my in and out points and the yellow bounded selection range on the clip!
Thank you!
Paul

Huh? Tom, thank you, but I'm not supposed to use the manual? I desperately need a User Guide. Is there one? And you did not explain what X does then, or what I am supposed to do? If the X does not do what that manual says, then how do I set the In and Out points on the clip?
Confused,
Paul

Similar Messages

How to do range selection for connected clips?

How to do range selection for connected clips? Whenever I press I or O, it only selects the primary storyline. I want select a portion of the connected clip and trim it.

If you're using the 10.1.x, and if you set the playhead, so that the circle is over the connected clilp (you don't even need a range selection OR have the clip selected) you can type Option - [ to trim from the beginning of the clip to the playhead; you can type Option - ] to trim from the playhead to the end; or if you do set a Range selection, you can type Option - \ (backslash) to trim both ends off the clip preserving the range selection.
If that circle isn't over the connected clip you require (perhaps you have a stack of clips) then you will need to click on the clip you need to have selected for the trim operation.

Why does right clinking on link and selecting open in new tab does not work?

Why does right clinking on link and selecting open in new tab does not work?
It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Change password on the first use - does not work

Change password on the first use - does not work.
Created a user and specified 'Change password on the first use' - when user logs in - the 'Change password' window does not pop- up.
Please advise.

(APEX 4.0.2) I am running into this same issue - if you don't set the password expiration and locking to 'Yes', the user gets into the app without being asked to change the pw.
When you do set expiration and locking - after the user logs on with their temporary password, it does take them to the change password page (4155:50) but the username is blank. Because the username didn't get to the page the old password will never match and you get the "Invalid password" message.
What am I missing? Anyone successful doing this?
Simple application, default authentication, no javascript, HTTP_SERVER, no ssl.
Thanks,
Steve

HT204053 I have different icloud and iTunes id's and I want to do homesharing for all my devices. I'm trying to set up a new iMac but homesharing is not working. SHould it be the itunes or iCloud id?

I have different icloud and iTunes id's and I want to do homesharing for all my devices. I'm trying to set up a new iMac but homesharing is not working. Should it be the itunes or iCloud id?

Welcome to the Apple Community.
Preferably your iTunes account, but it shouldn't really matter for getting homesharing turned on, as long as it's a valid ID.

When I detach my audio do I have to include that in range selection when exporting clip?

So I usually export the clip I want to share by Range selecting it and then exporting the range selected part. I detached the audio and cannot seem to grab the audio file underneath the regular clip to export with the rest. How can I get that detached audio in the range selected part or will it just go along too even if it is not in the yellow range selected part?

FCP exports everything in the range, vertically as well as horizontally.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

Clip name effect not working correctly in 2014/2014.1

I'm referring to these notes from the latest bug fixes here...
Bugs fixed in Premiere Pro 2014.1 Release | Premiere Pro work area
"Clip name effect doesn’t work correctly if Source Track is set to a different track."
"The Clip Name effect does not work when applied to a transparent video track item, with Source Track set to a video clip."
I've just updated Premiere (2014.1) to specifically fix these two bugs. The Clip name effect isn't using the correct file names. It uses something close but not quite e.g. clip 100 shows as 100B which is down the timeline.
The effect is applied to a transparent layer (have also tried it in a black video layer) and the clip name drawn from a different video track (video/PNGs in track 1, transparent video and effect is in track 3). This problem only appears when videos are in the timeline. When used with stills (PNGs) it works fine.
Any idea of a fix or workaround that isn't using some kind of titling filter? I'm looking to automate the shot naming process for a pipeline in creating animation animatics and this would be perfect. If to actually worked properly.
Using Premiere on a Mac Book Pro with 10.9.5.

Anyone from Adobe care to offer some insight as it's something that is reportedly fixed?

Problem with GenericCatalogDAO JDBC Resultset using parameters not working

Hello
I have a problem with Petstore GenericCatalogDAO. java. The problem is the behaviour of the resultset object when retrieving data from the database.Below are two synareos one that
works (when) hard coded and one that does not work when parameter values passed into the the result set.
1. The code the WORKS.
statement = connection.prepareStatement("select a.productid , name, descn from product a, product_details b
where a.productid = b.productid and locale= 'en_US' and a.catid = 'FISH' order by name"
,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
resultSet = statement.executeQuery();
resultSet.absolute(1);
String s = resultSet.getString(1);
The code that gives me a 'exhausted resultset' error which I think means no results
String[] parameterValues = new String[] { locale.toString(), categoryID };(For example parameters are 'en_US' and 'FISH')
statement = connection.prepareStatement("select a.productid , name, descn from product a, product_details b
where a.productid = b.productid and locale=? and a.catid =? order by name"
,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
for (int i = 0; i < parameterValues.length; i++) {
statement.setString(i + 1, parameterValues[i]);
resultSet = statement.executeQuery();
resultSet.absolute(1);
String s = resultSet.getString(1);
There is obviously a problem using these named parametevalues with these preparedstatement resultset, Does anybody know anything about this and a fix for it????
Cheers. Roger

Which version of PetStore are you using?
-Larry

Change Password on first use does not work properly.

I have created apex application user in Oracle Apex 3.2 as follows
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99');
END;
As in the documentation
p_change_password_on_first_use IN VARCHAR2 DEFAULT 'Y',
User should be prompted to change password at first use. But it does not work properly. There is no such message. Still accepts user to log in with old passord that was first given to the user. I have tried explicitly to ensure change password at first log in. by
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99',
p_change_password_on_first_use =>'Y');
END;
Still does not work. How can I ensure user to change password on first login.
Hasan Al Mamun
Programmer
Bangladesh Bank
Dhaka, Bangladesh

Might be a long way around the problem but I would utilize a boolean flag in a column (FIRST_LOGIN) your custom auth table set to 'Y' when you create their account. Then on the login page have a page process something like:
** NOT TESTED **
declare
v_first VARCHAR2(10;
v_session NUMBER;
begin
v_session := APEX_CUSTOM_AUTH.GET_NEXT_SESSION_ID;
select FIRST_LOGIN into v_first from AUTH_TABLE where user_name = :P101_USERNAME and :P101_PASSWORD;
if v_first = 'Y' then
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':2' *** THIS IS YOUR PAGE TO HAVE THEM RESET THEIR PASSWORD ***
else
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':1' *** MAIN LOGIN PAGE *****
EXCEPTION WHEN OTHERS THEN
*** handled **
end;
The page 2 in this example would have an few items for them to enter their new password twice, a page process to update their password in the auth table and then redirect them to the intended first page.
Not sure if it meets your setup.
Ricker

SELECT with pattern CP '50*' is not working on material numbers MATNR

Hello,
I have a specific matchcode for searching on material numbers with a function module as selection method.
In this function module, the SELECT clause is built dynamically as bellow.
      SELECT (temp3)
        INTO CORRESPONDING FIELDS OF TABLE result_tab UP TO CALLCONTROL-MAXRECORDS ROWS
         FROM (temp)
         WHERE (temp2) .
In the "temp2" variable, I use RANGES for the selection simply built with values of SELECT-OPTIONS coming from the search help selection screen.
I am facing the following problem :
When a search is executed on material number with the following pattern '50*' --> nothing is found !
When I run a search on '50575' --> the material number is found !
I expect it is a problem of convertion routines (external to internal format) but I am not able to fix a solution...
We are in SAP_BASIS 700.

I think it can be done.
I have -
CONCATENATE 'Z+_'   '00+' INTO r_ranges-low .
    r_ranges-sign = 'I'.
    r_ranges-option = 'CP'.
    APPEND r_ranges.
    SELECT ar_object FROM toasp
      INTO CORRESPONDING FIELDS OF table lt_toasp
       WHERE ar_object IN r_ranges.
And it returns all values with pattern 'Z_00'.
(Z1_001, Z1_002 etc.)
If the pattern '50*' is not working, you could try using '50+++'.
Regards,
MaryM

Setting default value of Tabular form item is not working

Hi,
I have a tabular form and in that I want to set the default value of the username to app_user. So in the default value of the item, I wrote v('app_user') and type Pl/SQL, but that does not seem to work. I tried the static application & page item with :app_user. That threw an error.
Also, I wanted to populate the date field in one column. Doesn't sysdate work?
Thanks,
Sun

Bob, I did read that. MY problem is that it is still not working. I am wondering if this is because the table is in execute query mode maybe? I am wondering if the default value needs to be added after the tabular data is populated through some other way? Maybe the default value would work only for static non database items?
ThanksYou're right, I just tested that using the default setup on the column in report attributes and it did not work.
I think you'll have to update the columns with the default value post query but I'm not sure exactly what you need to do.
I have a form that has a weight entry column. I tried changing the query to set the default value in the query
from..
Select Weight
From...
to
Select 999.99 Weight
From...That appeared to work, but the 999.99 value was not populated back to the Database since it wasn't entered through the form UI. APEX maintains the entered values internally so it can do its checksumm processing and update modified rows back to the DB. I'm thinking you could update what needs to be updated using Javascript in a Dynamic Action, but I'm afraid I don't know how to do that.
Excuse my incorrect assumption when first replying.

Basic invisible button movie clip frame actions not working, pls. help!

Hi,
I've got a basic little slide show player which is timeline-based, rolling through 5 images with alpha transitions, and on the topmost layer, I have 5 invisible movie clips which have actions applied to them as follows:
on (press) {
gotoAndPlay(21);
This action should allow for the on click button to navigate to that specific frame, or image, but for some reason it is not working.
Did I do something wrong? I feel like I've done this before but I'm rusty with Flash since I don't use it all the time.
Any help is greatly appreciated!
Thanks,
Sean

The invisible movie clip is something I know I've done over the years on many occasions - I'm not sure I'm understanding your alternate technique, can you explain it better? The way my movie clips are invisible is just by setting the alpha to zero in the properties for the movie clip instance (clicking on the object on stage, then setting it in properties)..
Also, the actions are on the invisible movie clips (buttons) and not the timeline.
Cheers,Sean

Toggle clip keyfram button not working...

I recently upgraded to the latest version of fcp and I'm trying to do a variable speed change.
My toggle clip does not work. When I click on it, nothing happens. the tick marks that show the speed are not showing up. (I have also tried opt T) anyone know if I have a setting wrong???
Thanks

Thanks, that was it...
I right clicked and had to select "keyframe editor" and "speed indicators" under video.
Solved

TWO CRITICAL BUGS: 1) File, "Save Page As" and 2) right-click the picture and select "Save Image As", both do not work at all in Firefox 27, 28, and 29!

Note: capitals are used only to highlight important words.
PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
I am forced to revert to Firefox 26!
First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
---FIRST CRITICAL BUG:
When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---SECOND CRITICAL BUG:
When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
Please, make it a priority to solve these two critical bugs. Thanks.
I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.

First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

Set range selection on a clip using "X" not working!

Similar Messages

Maybe you are looking for