Set the screen size

How to fix the size of a screen? I want the opportunity to screen sales, it opens in a tmanho fixed and do not allow to maximize the screen. How?

Hi,
Refer This.......
[Change Form type;
[Maximize button in a customized form;
[Form Sizing;
Thanks
Shafi

Similar Messages

How to set the screen size with nested Iview screen

Can someone show me how to set the screen size with nested IView screen.
at the moment i only try it with trial and error untill it looks somewhat close. Is there a property in VC to set the size for Height and width.
The same question is for the form. the form elements inside the form is easy but the actual form is still a challenge.

Hi,
Yes you are correct ,Still the Form and iview are not able to change thier Layout Structure using a Propery.
it is available with VC7.1
Govindu

How do I set the screen size of my site?

Hey guys making a site for a friend and I'm not sure on how I go about setting a screen size that can be viewed on varying screen sizes like 1280x800 and up. At the moment on my 1920x1080 display it looks fine but when I open it on her MacBook Pro (1280x800) it is cut of by half and my website has some fixed anchors which I do not allow scrolling so you are kind of stuck.
Thanks to anyone that can help, can't find a tutorial anywhere

In the normal state the screen on an iPad will rotate depending on which side is up. Any of the four sides can be up or on top and the display will look correct. But if you want to lock the display in one orientation you can. Swipe up from the bottom of the screen to reveal the Control Center. Then tap on the Orientation Lock icon. That's the icon of the small padlock surrounded by a circular arrow. That icon will appear at the top right of the display and the screen will no longer rotate. Repeat the same procedure to unlock orientation.

CP5: Is there a way I can set the resolution size before I start recording?

When I launch Adobe Captivate 5, I click on "Create New.. Software Simulation", but I can't find a way of setting the screen size / resolution before I start recording, like there is when you click "Create New... Blank Project".
I prefer to do a new Software Simulation instead of a Blank Project because I can record in Demo, Training and Assement modes all at once, and I don't get this option when I start a project.
Can someone help me?
Many thanks!

Hello and welcome to the forum,
Choose 'Custom size' after having selected the application to record, and you will be able to choose a resolution. If you choose Application or Application region the current resolution, size of that application or that region will be kept. But with custom size you can have a resolution and the application snapping to that resolution.
Lilybiri

How can I set the minimum size the location bar should automatically resize to

I have moved all of my navigation buttons, location bar and tabs to be in line. This has been done to maximise the available space on screen.
This works perfectly with two or three tabs open, but once more tabs are opened the location bar automatically shrinks to allow for more tabs and becomes unusable. I want to set the minimum size the location bar should shrink to but I do not know how to do this.
[http://www.mediafire.com/imgbnc.php/eed5749531b3081c43186f59492500e5f089c498c0372fb6fa797b7d697826806g.jpg Screen shot displaying automatically resizing location bar]
Any help would be appreciated.
Thanks.

FBZP seems to be the only way to do the minimum amout setting in standard SAP.
You can check the BTE (Business transaction event) 00001820 for excluding the low amount items in F110. Please search SDn on how to use the BTEs.
Regards,
SDNer

Each time I open a site, the site exceeds the screen size until I manually zoom out. How do I fix this permanently?

For no apparent reason recently, when I open a website with Firefox, the site's homepage or any other visual exceeds the screen size of my monitor. It did not previously do that and I have not intentionally or knowingly changed any settings. I can click on VIEW and then ZOOM OUT twice and it fits the screen. What can I set/fix so that the initial page on the screen is properly sized like it used to be.
Thank you.
JAF

Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Command+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
You can set the layout.css.devPixelsPerPx pref on the <b>about:config</b> page to 1.0 (current default value is -1.0) to restore the behavior of previous Firefox versions.
*http://kb.mozillazine.org/about:config
Use this extension to adjust the font size for the user interface.
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
You can look at the Default FullZoom Level or NoScript extension if web pages need to be adjusted after changing the layout.css.devPixelsPerPx pref.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
*https://support.mozilla.org/kb/forum-response-Zoom-feature-on-Firefox-22

Need help setting the exact size of my JSlider

Hello everyone. I'm trying to build a small program to help people learn a about RGB colour values, and at the same time teach myself a bit more about Java. Things have been going fine so far until I came to setting my JSlider's size. The intention is to have three JSliders with a JPanel next to each. The I need the track of the slider to be exactly 256 pixels tall (one pixel per gradient value painted into the adjacent JPanel) plus whatever extra padding and spacing the Look And Feel dictates.
I've got the height set to 256 pixels in the following code, but it makes the JSlider as a whole 256 pixels tall and so squishes the track. I've set the minor tick spacing to 2 so that if the track was actually 256 pixels tall, the ticks would alternate over each screen pixel. If you compile and run the code, you will notice that a few ticks appear next to each other without a one-pixel gap between them. I've also verified it by taking a screen capture, pasting it into the GIMP and then using the measure tool to check the size.
I've tried searching through the API documentation to find ways of doing it, or to see if some ideas I've had so far were possible, but so far, I've not found anything particulairly satisfactory. I even tried to see if I could set the JSlider size to current JSlider size minus the track size, plus 256, but I couldn't find a way of getting the current size of the track.
Can anyone help me out here? I'm rather stuck.

Here's the code with all but the JSliders stripped out. Sorry about having to put it in a seperate post; the forum wouldn't allow it.
Here's the code I have so far:
package com.stephenphilbin.colourcoder;
import java.awt.Color;
import java.awt.Dimension;
import javax.swing.GroupLayout;
import javax.swing.GroupLayout.Alignment;
import javax.swing.GroupLayout.ParallelGroup;
import javax.swing.GroupLayout.SequentialGroup;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JSlider;
import javax.swing.UIManager;
import javax.swing.border.LineBorder;
import javax.swing.border.TitledBorder;
public class Colourcoder extends JFrame {
    private void initComponents() {
        String colourcoderTitle = "Colourcoder";
        String lightsPanelBorderText = "Lights";
        // Create the lights panel, set the borders and set up layout references
        JPanel lightsPanel = new JPanel();
        TitledBorder lightsPanelBorder = new TitledBorder(LineBorder.createGrayLineBorder(), lightsPanelBorderText);
        lightsPanel.setBorder(lightsPanelBorder);
        GroupLayout lightsPanelLayout = new GroupLayout(lightsPanel);
        lightsPanel.setLayout(lightsPanelLayout);
        // Initialize each light slider
        JSlider[] lightSliders = new JSlider[3];
        for (int i = 0; i < lightSliders.length; i++) {
            lightSliders[i] = new JSlider(JSlider.VERTICAL, 0, 255, 0);
            lightSliders.setPaintTrack(false);
lightSliders[i].setMajorTickSpacing(16);
lightSliders[i].setMinorTickSpacing(2);
lightSliders[i].setPaintTicks(true);
lightSliders[i].setSnapToTicks(true);
// Loop through the light sliders and add them to the lights panel
SequentialGroup horizontalLightGroup = lightsPanelLayout.createSequentialGroup();
for (int i = 0; i < lightSliders.length; i++) {
horizontalLightGroup.addGroup(lightsPanelLayout.createParallelGroup().addComponent(lightSliders[i]));
SequentialGroup verticalLightGroup = lightsPanelLayout.createSequentialGroup();
ParallelGroup parallelLightsGroup = lightsPanelLayout.createParallelGroup();
verticalLightGroup.addGroup(parallelLightsGroup);
for(int i = 0; i < lightSliders.length; i++) {
parallelLightsGroup.addComponent(lightSliders[i], 256, 256, 256);
lightsPanelLayout.setHorizontalGroup(horizontalLightGroup);
lightsPanelLayout.setVerticalGroup(verticalLightGroup);
// Final window/frame configuration
setTitle(colourcoderTitle);
setResizable(false);
setLocationRelativeTo(null);
GroupLayout frameLayout = new GroupLayout(getContentPane());
getContentPane().setLayout(frameLayout);
frameLayout.setAutoCreateContainerGaps(true);
frameLayout.setHorizontalGroup(
frameLayout.createParallelGroup(Alignment.LEADING)
.addGroup(
frameLayout.createSequentialGroup()
.addComponent(lightsPanel))
frameLayout.setVerticalGroup(
frameLayout.createParallelGroup(Alignment.LEADING)
.addGroup(
frameLayout.createSequentialGroup()
.addComponent(lightsPanel))
pack();
public Colourcoder() {
setDefaultCloseOperation(EXIT_ON_CLOSE);
UIManager.put("swing.boldMetal", Boolean.FALSE);
try {
UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
} catch (Exception ex) {
System.exit(1);
initComponents();
* @param args the command line arguments
public static void main(String[] args) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new Colourcoder().setVisible(true);
Edited by: S_Philbin on Sep 29, 2008 11:18 PM

How do I set the frame size

I am Making a program for purchasing games, with the basic layout alsot done, except on problem. When the purchase button is pressed, a dialog shows up but nothing is seen until i resize it. How would i set the frame size so that i do not need to resize it each time? below is the code for the files. Many thanks in advance.
CreditDialog
import java.awt.*;
import java.awt.event.*;
class CreditDialog extends Dialog implements ActionListener { // Begin Class
     private Label creditLabel = new Label("Message space here",Label.RIGHT);
     private String creditMessage;
     private TextField remove = new TextField(20);
     private Button okButton = new Button("OK");
     public CreditDialog(Frame frameIn, String message) { // Begin Public
          super(frameIn); // call the constructor of dialog
          creditLabel.setText(message);
          add("North",creditLabel);
          add("Center",remove);
          add("South",okButton);
          okButton.addActionListener(this);
          setLocation(150,150); // set the location of the dialog box
          setVisible(true); // make the dialog box visible
     } // End Public
     public void actionPerformed(ActionEvent e) { // Begin actionPerformed
//          dispose(); // close dialog box
     } // End actionPerformed
} // End Class
MobileGame
import java.awt.*;
import java.awt.event.*;
class MobileGame extends Panel implements ActionListener { // Begin Class
     The Buttons, Labels, TextFields, TextArea
     and Panels will be created first.
     private int noOfGames;
//     private GameList list;
     private Panel topPanel = new Panel();
     private Panel middlePanel = new Panel();
     private Panel bottomPanel = new Panel();
     private Label saleLabel = new Label ("Java Games For Sale",Label.RIGHT);
     private TextArea saleArea = new TextArea(7, 25);
     private Button addButton = new Button("Add to Basket");
     private TextField add = new TextField(3);
     private Label currentLabel = new Label ("Java Games For Sale",Label.RIGHT);
     private TextArea currentArea = new TextArea(3, 25);
     private Button removeButton = new Button("Remove from Basket");
     private TextField remove = new TextField(3);
     private Button purchaseButton = new Button("Purchase");
     private ObjectList gameList = new ObjectList(20);
     Frame parentFrame; //needed to associate with dialog
     All the above will be added to the interface
     so that they are visible to the user.
     public MobileGame (Frame frameIn) { // Begin Constructor
          parentFrame = frameIn;
          topPanel.add(saleLabel);
          topPanel.add(saleArea);
          topPanel.add(addButton);
          topPanel.add(add);
          middlePanel.add(currentLabel);
          middlePanel.add(currentArea);
          bottomPanel.add(removeButton);
          bottomPanel.add(remove);
          bottomPanel.add(purchaseButton);
          this.add("North", topPanel);
          this.add("Center", middlePanel);
          this.add("South", bottomPanel);
          addButton.addActionListener(this);
          removeButton.addActionListener(this);
          purchaseButton.addActionListener(this);
          The following line of code below is
          needed inorder for the games to be
          loaded into the SaleArea
     } // End Constructor
     All the operations which will be performed are
     going to be written below. This includes the
     Add, Remove and Purchase.
     public void actionPerformed (ActionEvent e) { // Begin actionPerformed
     If the Add to Basket Button is pressed, a
     suitable message will appear to say if the game
     was successfully added or not. If not, an
     ErrorDialog box will appear stateing the error.
          if(e.getSource() == addButton) { // Begin Add to Basket
//          GameFileHandler.readRecords(list);
               try { // Begin Try
                    String gameEntered = add.getText();
                    if (gameEntered.length() == 0 ) {
                         new ErrorDialog (parentFrame,"Feild Blank");
                    } else if (Integer.parseInt(gameEntered)< 0
                              || Integer.parseInt(gameEntered)>noOfGames) { // Begin Else If
                         new ErrorDialog (parentFrame,"Invalid Game Number");
                    } else { // Begin Else If
                         //ADD GAME
                    } // End Else
               } catch (NumberFormatException num) { // Begin Catch
                    new ErrorDialog(parentFrame,"Please enter an Integer only");
               } // End Catch
          } // End Add to Basket
     If the Remove From Basket Button is pressed, a
     a suitable message will appear to say if the
     removal was successful or not. If not, an
     ErrorDialog box will appear stateing the error.
     if(e.getSource() == removeButton) { // Begin Remove from Basket
          try { // Begin Try
                    String gameEntered = remove.getText();
                    if (gameEntered.length() == 0 ) {
                         new ErrorDialog (parentFrame,"Feild Blank");
                    } else if (Integer.parseInt(gameEntered)< 1
                              || Integer.parseInt(gameEntered)>noOfGames) { // Begin Else If
                         new ErrorDialog (parentFrame,"Invalid Game Number");
                    } else { // Begin Else If
                         //ADD GAME CODE
                    } // End Else
               } catch (NumberFormatException num) { // Begin Catch
                    new ErrorDialog(parentFrame,"Please enter an Integer only");
               } // End Catch
          } // End Remove from Basket
     If the purchase button is pressed, the
     following is executed. NOTE: nothing is done
     when the ok button is pressed, the window
     just closes.
          if(e.getSource() == purchaseButton) { // Begin Purchase
               String gameEntered = currentArea.getText();
               if (gameEntered.length() == 0 ) {
                    new ErrorDialog (parentFrame,"Nothing to Purchase");
               } else { // Begin Else If
                    new CreditDialog(parentFrame,"Cost � 00.00. Please enter Credit Card Number");
               } // End Else
          } // End Purchase
     } // End actionPerformed
} // End Class
RunMobileGame
import java.awt.*;
public class RunMobileGame { // Begin Class
     public static void main (String[] args) { // Begin Main
          EasyFrame frame = new EasyFrame();
          frame.setTitle("Game Purchase for 3G Mobile Phone");
          MobileGame purchase = new MobileGame(frame); //need frame for dialog
          frame.setSize(500,300); // sets frame size
          frame.setBackground(Color.lightGray); // sets frame colour
          frame.add(purchase); // adds frame
          frame.setVisible(true); // makes the frame visible
     } // End Main
} // End Class
EasyFrame
import java.awt.*;
import java.awt.event.*;
public class EasyFrame extends Frame implements WindowListener {
public EasyFrame()
addWindowListener(this);
public EasyFrame(String msg)
super(msg);
addWindowListener(this);
public void windowClosing(WindowEvent e)
dispose();
public void windowDeactivated(WindowEvent e)
public void windowActivated(WindowEvent e)
public void windowDeiconified(WindowEvent e)
public void windowIconified(WindowEvent e)
public void windowClosed(WindowEvent e)
System.exit(0);
public void windowOpened(WindowEvent e)
} // end EasyFrame class
ObjectList
class ObjectList
private Object[] object ;
private int total ;
public ObjectList(int sizeIn)
object = new Object[sizeIn];
total = 0;
public boolean add(Object objectIn)
if(!isFull())
object[total] = objectIn;
total++;
return true;
else
return false;
public boolean isEmpty()
if(total==0)
return true;
else
return false;
public boolean isFull()
if(total==object.length)
return true;
else
return false;
public Object getObject(int i)
return object[i-1];
public int getTotal()
return total;
public boolean remove(int numberIn)
// check that a valid index has been supplied
if(numberIn >= 1 && numberIn <= total)
{   // overwrite object by shifting following objects along
for(int i = numberIn-1; i <= total-2; i++)
object[i] = object[i+1];
total--; // Decrement total number of objects
return true;
else // remove was unsuccessful
return false;
ErrorDialog
import java.awt.*;
import java.awt.event.*;
class ErrorDialog extends Dialog implements ActionListener {
private Label errorLabel = new Label("Message space here",Label.CENTER);
private String errorMessage;
private Button okButton = new Button("OK");
public ErrorDialog(Frame frameIn, String message) {
/* call the constructor of Dialog with the associated
frame as a parameter */
super(frameIn);
// add the components to the Dialog
          errorLabel.setText(message);
          add("North",errorLabel);
add("South",okButton);
// add the ActionListener
okButton.addActionListener(this);
/* set the location of the dialogue window, relative to the top
left-hand corner of the frame */
setLocation(100,100);
// use the pack method to automatically size the dialogue window
pack();
// make the dialogue visible
setVisible(true);
/* the actionPerformed method determines what happens
when the okButton is pressed */
public void actionPerformed(ActionEvent e) {
dispose(); // no other possible action!
} // end class
I Know there are alot of files. Any help will be much appreciated. Once again, Many thanks in advance

setSize (600, 200);orpack ();Kind regards,
  Levi
PS:
    int i;
parses to
int i;
, but
[code]    int i;[code[i]]
parses to
    int i;

How do I set the Page size default in Adobe Reader using Window 8?

I need to set the page size everytime I go to print from my Adobe Reader in my windows 8. Is there a way to set the page I want letter (8.5 by 11) as a default? So I do not have to do this everytime I print something?

I can't help but wonder why Adobe doesn't respond to this - at this point there are 464 views of this item and still no answer. I have the same problem and it's a big irritation to have to set the duplex mode everytime I want to print!

How can I set the font size of a form field in the fdf file?

I need to dynamically set the font size of a field to accommodate text of varying length, automatic font size won't work in this case. It seems like this can be done in the FDF but I have tried several variants without success. Could someone help out with a real example of what the syntax in the fdf should look like.
I am using Acrobat Professional 8.1 but the created fdf will need to work with Reader also.

I think that the font size has to be set in the form itself, not the FDF.

How can I find out the screen size of the users moniter using the Acrobat SDK?

How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
Thanks,
Gregory

Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
Gregory

How do I set the default size of a new folder?

I have finder sized the way I want for existing folders and if I do Finder > New Finder Window. These preferrences, however, do not seem to apply to new folders. Everytime I create a new folder on my desktop, and open that folder for the first time, the window size is really small and the sidebar is narrow. This is incredibally annoying. How do I set the default size for all new folders? Is there a plist file I can edit to fix this? Or an AppleScript I can run automatically in the background that fixes this? I am running Mavericks 10.9.1.

If you use the Finder's New Finder Window command (command N) to create a new window, resize it, place it where you want, and set it for icon view or however you want it. Then close it. Closing it is what sets these as the default. That should become the default for every new Finder window you create using the new window command. But if you have lots of windows open at once and then close them, the last window you close will set a new default.
There are lots of utilities that control Windows - their size and placement. I use one called Moom but there are many more.

HT5639 I am attempting to install windows 7 ultimate on a mid2012 production macbook pro using Bootcamp 5 in Mountain Lion. Whenever I set the partition size and tell it to continue, the program quits unexpectedly. I have done this about 5 times now. Sugg

The lead-in above pretty much states the problem. I am attempting to install Windows 7 from a disk, but that is not the issue. Boot Camp 5 just quits and reopens. I then repeat. Help.

I am about to run specialized GIS software that may or may not need the full machine resources. I am an attorney who uses QuickBooks for my accounting. The Mac version does not do as much as the Windows version. This is from both Apple and Quick Books professionals. I am using Parallels Desktop version 8 at this time. It does not support QuickBooks Windows version per Parallels. Any other questions? I am a highly competent PC user who is new to Macs. I am entitled to my own configuration choices. That said, I know when I need help which is now.
As to the free space issue I have 665.18 GB free space out of 749.3 GB on the drive. I am not trying to run the 32 bit version. I know that it requires the 64 bit version. Besides, it does not get that far in the process. As I said Boot Camp asssitant terminates unexpectedly as soon as you hit the continue button after setting the partition size. Therefore I conclude that it does not have a chance to see which version of Windows that I am using. I am using Windows 7 Ultimate 64 bit version in the virtual engine (to use Parallels speak), but again Boot Camp would not see that since it is not running. It can't run at the momenet because Apple just installed a new hard drive and I have just restored the data from TIme Machine and Parallels needs reactivated, which I have not done yet deliberatley. With all of this addtiional information do you have any further suggestions? Thanks for your time and interest my issue.

Hi, I am using Indesign CS6, How to set the page size in Inches.

Hi, I am using Indesign CS6, How to set the page size in Inches.

All fields in InDesign can be entered in any measurement system. So, if you want to make an 8"x10" document and go to File>New Document and the window looks like this:
…you can type either 8 in or 8" into the Width field like this:
…and when you move to the next field, it will convert the eight inches into the equivalent number in the unit of measure that it is using at the moment, like this:
… (203.2 milimeters is the same as 8 inches). You can also enter a different measurement unit into other fields once the file is created, such as the width or height of a frame, or the position of an object in the X and Y coordinates.
If you would rather just work in inches instead of having to type the inches mark or abbreviation, go to InDesign>Preferences>General and select the Units & Increments tab. There you will see Ruler Units for Horizontal and Vertical at the top of the window. Set them to Inches and all of the fields will display in inches. If you do that to an open document, you will change the unit of measure for that document. If you do it while no documents are open, it will change the unit of measure for any new documents you create. To change the unit of measure for existing documents, you will have to open each and make the change.

How to set the page size and the margins programatically

Hello,
I am working with crystal report XI Release2 and asp.net.
One of my report is having 4 graphs in a single report.In order to display all the graphs in one page i have set the paper size as A3.(Via Crysta report ->File->Page set up)
But the page size A3 is not provided by all printers.So problem comes when the application is diployed on a machine which does not support A3 Printer.All the graphs will not be shown on a single page.
Also Each and Every time ,when the application is diployed on a machine,user has to open the crystal report and adjust the page size accordingly to get all the reports on a single page.
This is a kind of usability issue also.
Is it possible to set the page size and the margins programatically say for eg 11 X 17.so that with out doing anything all the 4 graphs will get displayed on a single page ?
Please let me know if you require more information regarding this issue.
Thanks in advance.
smitha.

Hi Ludek,
i could solve the issue by using the follwing code.
report = new ReportDocument();
PageMargins customPageMargin = report.PrintOptions.PageMargins;
report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
report.PrintOptions.PaperSize = PaperSize.Paper10x14;
customPageMargin.rightMargin = 1;
customPageMargin.topMargin = 0;
customPageMargin.bottomMargin = 0;
report.PrintOptions.ApplyPageMargins(customPageMargin);
Thanks for you help.
Regards,
smitha.

Set the screen size

Similar Messages

Maybe you are looking for