Set up profile and object to distribute report

I am getting error Object not found when I created a profile and object to distribute one report to different groups based on the city. However, when in the test mode, it event didn't send to myself who is the administrator. The process to create the profile and object are correct. Anyone have seen this error before? It seems the security problem, but change the security seems fine. However, the user in the group won't be able to refresh that particular report, but is able to create a new report from the same universe. We use XI R2, have been told can only use the deski report to distribute. However, we want to be able to publish the webi report in the long run.

Since the replication configuration is in the primary database, it is also in the database you log ship to. So once you do RESTORE WITH RECOVERY on the secondary database, replication should start rolling. The one caveat is that there must be a distribution
database to talk to. But if the distribution database is not on the primary or secondary server, but on a third server (maybe the same as where the reporting database is), this should not be an issue.
I need to add the disclaimer, that this is nothing I have implemented myself, so I encourage that you test carefully that what I have said actually works.
Erland Sommarskog, SQL Server MVP, [email protected]

Similar Messages

Object Reference not set to instance of Object when sub-report on new page

I have a problem when my sub-report goes onto the second page of the report, with an error message.
My VB.NET displays a report and sub-report (in the footer) in a CrystalReportViewer:
- When both are on the first page, both display fine
- When the sub-report (or at least part) goes to the second page, the report displays OK, but without the subreport. When I go to page 2 of the report - hoping to see the sub-report - an error message is displayed, with title "Crystal Report Windows Forms Viewer" and text "Object Reference not set to an instance of an object".
This problem occurs both on my development machine in VS and at a user site.
Am desperate for some ideas please! I have VB.NET in Visual Studio 2010, and SAP Crystal Reports, version for Visual Studio 2010. The program is targeted for .NET Framework 3.5.
I looked for the HandleException event on my Windows Forms Viewer, as suggested by SAP and Microsoft, but cannot find this. See for [example|http://devlibrary.businessobjects.com/businessobjectsxi/en/en/crystalreports_dotnet_sdk/crystalreports_net_doc/doc/crsdk_net_doc/html/crlrfwindowsformscrystalreportviewerclasshandleexceptioneventtopic.htm]

Usually, the error is due to the object going out of scope. Placing the object in a session may help. Moving the CR code to page init or page load may help. Looking at samples may help:
http://wiki.sdn.sap.com/wiki/x/JQBmBQ
CR Dev help files are here:
SAP Crystal Reports .NET API Guide http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip
SAP Crystal Reports .NET SDK Developer Guide http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip
Finally, ensure you are using Service Pack 2 (see the sticky thread at the top of this forum).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Set row height and column witdh in Report Designer

All,
Is there any way to enter value of a row height or a column width by numbers, instead of dragging them, which I find stupid, especially if several rows should have same height (or several columns same width). I looked for something like Properties-Size/Width/Height but didn't find any. Did I miss anything?
Cheers!
/RB

For those who come from other programming language specially web development, designer or Analyzer looks stupid, but it is very powerful tool. If you need to manage the width and height, then please explore the options in Table Interfaces, there you will be able to use your programming skills.
thanks.
Wond

How to set field width and height at runtime programatically?

Hi all,
I want to set the width and height of a report field by reading its values from the database table.
Is it possible in Oracle reports?
How to achieve this in Oracle reports 10g?
Any help will be highly appreciated.
Thanks .... Best Regards
Bilal

You cannot give it a specific value. During design you can set Horizontal and Vertical Elasticity properties to Variable, so the items are automatically scaled when running the report.

Getting error "Object variable or with block variable not set" when trying to open a FR report in studio

Problem Description
We are on FR 11.1.2.2.305 installed on AIX. a user is getting this error: "Object variable or with block variable not set" when trying to open a FR report from FR studio client installed on windows xp . Initialy, we thought it may be a FR client installion issue. We uninstalled and cleaned up registry and did a fresh installation of the client but the issue still persists. The FR server and the client are on the same version.
The user is a LDAP user who is facing the issue. We have confirmed with other users and they dont have any issue accessing FR report from their own client but when they try to connect from the users machine who is having issues, the others users also see the above error. All the users are ldap users and all belong to same shared services groups so the provisiong is the same.
Any input will be appreciated.
Thanks

OK, in this case of one single computer, please make sure that settings as per below KB document as in place and then validate the issue:
Internet Explorer (IE7, IE8, IE9 and IE10) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
The information in this document applies to the following Enterprise Performance Management products:
    Calculation Manager
    Data Relationship Management (DRM)
    Enterprise Performance Management Architect (EPMA)
    EPM Workspace
    Essbase Administration Services (EAS)
    Financial Data Quality Management (FDM)
    Financial Management (HFM)
    Financial Reporting
    Foundation Services
    Interactive Reporting
    Planning
    Shared Services
    Web Analysis
Thanks!

Transport an Appraisal and Objective Setting Template

Note the following advice pertaining to transporting an appraisals and objective setting template (I have not found documentation about this anywhere else, so hopefully some of you find this useful):
Scenario:
You have maintained your templates in PHAP_CATALOG_PA in the main config client, and you have transported all other configurations (basic settings, etc.) to your unit test/integration test environment.
However, although you have right-clicked the category groups and templates to be transported and included them in a transport request, you find that only some of your configuration (or perhaps none at all!) is arriving in the target client when the transport is performed.
You may initially be able to work around this by downloading/uploading your config, but once your templates contain more complex configuration (such as using dynamic element references, etc.) you will find that this is no longer a feasible approach.
Cause & Resolution:
The problem is caused by outdated information in the workflow definition environment (transaction SWU3), and specifically the section labeled "Check Entries from HR Control Tables".
Run transaction SWU3, expand tree node "Maintain Definition Environment" (which should be marked with a red cross at this stage) and click on "Check Entries from HR Control Tables". The information presented in the right-hand pane indicates that:
If there are errors regarding the transport objects PDST or PDWS, the relevant entries are not maintained in table SOBJ. You can use the report RHSOBJCH to rectify this later.
Proceed as suggested and run report RHSOBJCH (through SE38 or SA38) in the config client (i.e. where the templates are to be transported from). This has no side-effects I am aware of other than updating the reference information required.
If you now run SWU3 again you should find that the "Check Entries from HR Control Tables" node is marked with a green tick.
Simply go back to the catalog, include your cat.groups & templates in a transport again, and Voila! Our work here is done.
Happy transporting...
Side-note: You may ask (as I did) what transporting of appraisal templates has to do with workflow, but it just so happens that the PD objects and infotypes associated with appraisals (VA, VB, VC, etc.) are transported through the same mechanism as workflow templates (which are also PD objects). if you peek inside the transport you will note that everything to do with the template and category group configuration is bundled inside PDWS and PDST transport objects...
Edited by: Francois Van Lille on Jun 29, 2009 9:58 AM

>
A. Jimenez wrote:
> Hi Francois,
>
> I have successfully transported Categories and Templates, but I have customized "appraisals process", which seems to create VH Objects, and this objects or customizations are not added in the transport order.
>
> You or anyone know how to transport this customization?
>
> Thanks in advance
Hi Abe,
what is the appraisal process you are talking about? The new stuff in ep4 where you define the process and steps which create the roadmap at the top of the document? if so SAP does not have a great straightforward solution, but they did provide us some options.
you can check out this thread and if you want I can send you the full document that is referred to in the post.
EP4: Performance Management-Flexible-Transporting the Tab & Process config

Report Generation broken after deployment - Excel Set Cell Color and Border.vi

Upon deployment, the Excel Set Cell Color and Border.vi became broken. After installing LV2010 SP1 to view the VIs in the deployment, I noticed that in the second case structure where the code draws the border using the BorderAround invoke node, there is an extra variant input parameter named 'Parameters'. Upon right-clicking, an option to 'Relink Invoke Node' appeared and after selecting this, the extra input disappeared and the VI was no longer broken.
Why does "Relink Invoke Node" appear? How do I create a deployment with this issue? Has anybody else experienced this? Why is the TestStand deployment so buggy?

Hi Ching-Hwa,
I have set up a test deployment here where I am deploying a workspace that contains a sequence file. This sequence file has a LabVIEW Action Step calling a VI that opens a new Excel file and simply calls the Excel Set Cell Color and Border VI. After deploying this, both the VI and my test sequence ran on the deployment machine without error. Therefore, I do have some more questions to more accurately reproduce what you are seeing.
First, what operating systems are you developing on and deploying to? Also, what license do you have for TestStand on the machine you are deploying to? If you have a development version, can you manually take the sequence file and VI to this machine and run it? I know you now have LabVIEW 2010 SP1 on your development machine, but if you have the development version of TestStand as well, it would be interesting to see if you copy the files over if you still see this behavior. Are you including the TestStand Engine in the deployment?
Can you open a blank VI on the deployment machine and add the Excel Set Cell Color and Border VI? It would also be interesting to see if this is not a product of the deployment, but rather an issue with something on the deployment machine itself. What version of the Report Generation Toolkit do you have on each machine? Also, what versions of Excel are you using on the development and deployment machine? Again, it would be helpful for me to know exactly what versions you have installed on both the development and deployment machines so that I can reproduce this as accurately as possible.
One last thing to try, too, would be to try deploying the VI by itself just to see if it also has the same behavior. Do you have the Application Builder in LabVIEW? If so, could you also try building an executable from the VI, create an installer, and deploy this to the deployment machine?
In regards to the "freezing" of code by removing the block diagrams, I do not believe this will be a proper work around in this case. While this removes the block diagram from actually being deployed along with the VI and restricts users from editing the code on the deployment machine, if something is getting changed in the compiled code upon deployment, this will not stop this from happening. This option is available more as a memory option to lower the size of the deployment as well as prohibit any users on the development machine from editing the block diagram themselves.
Thanks, Ching-Hwa! I look forward to your response so that I can continue trying to reproduce this issue. Have a great day!
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

Can't add database field or text object to a report (new and existing)

We have Crystal Report 8.5 and when trying to modify an existing report or create a new report, I can't seem to add any database fields or text objects in my report. I get a prohibition symbol (circle with a backslash inside it) when I hover over the report. Has anyone encoutered something like this? Any suggestions? Thank you.

Do you have two monitors?
I had this problem if I tried to open crystal in the second monitor, move it back to primary monitor and it should be OK.
Ian

I bought my I pod touch 3-4 months ago and I got this message all of a sudden, it said something along the lines of provisonal complete_Distrib... will expire in 30 days. What is this it's under setting-general-Profile should I be worried?

I bought my I pod touch 3-4 months ago and I got this message all of a sudden, it said something along the lines of provisonal complete_Distrib... will expire in 30 days. What is this it's under setting-general-Profile should I be worried? Should I just let it expire.

Unless you have a company or school iPod, that profile was installed by an app you installed. It is likely that the app will no longer function when that date is reached. You can Google the name of the profile and that may provide some more information.

How do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

how do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

if you see all the different panel. I past the info in and have to manually expand the width of every panel. Is there a way of pasting the text in and the panel moves to the right with so that there is an even space on both sides of the blue panel?

How to set users level security profiles and auditing?

hi,
We are using EBS 12( 12.0.6 ) with database 10g (10.2.0.3) on Linux redhat 4.
I want to set the all user level and site level security profiles like user login attempts, password attempts, case sensitivity, and all these
infos and attempts should be audit.
Please also explain the empact of audit on running system?
Thx

I want to set the all user level and site level security profiles like user login attempts, password attempts, case sensitivity, and all these
infos and attempts should be audit. https://forums.oracle.com/forums/search.jspa?threadID=&q=Profile+AND+Option+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Profile+AND+Option+AND+Audit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Please also explain the empact of audit on running system?https://forums.oracle.com/forums/search.jspa?threadID=&q=Auditing+AND+FND+AND+Profile+AND+Option&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Try this in a TEST instance before you promote it to Production.
You will need to bounce the application services and enforce the users to sign off/on after setting those profile options.
Thanks,
Hussein

Find Universe, classes and objects used in each report

I want to find a list of universes, classes and objects used in each report
or the other way to find list of reports which use a particular universe. please let know, i could not get much information from activity universe in a proper way.

Hello Venkataramat,
plese post in more detail what kind of report you are using Crystal report ? webi ? Deski.
Please post in the specific forums.
If you have a Crystal Report I recommend to post this query to the [Crystal Reports Design|SAP Crystal Reports; forum.
Best regards
Falk

Dynamic setting of line count and footer in classical report

Hi all,
In classical report,we can set line count and footer at the beginning of the report as Line-count 6(2), here out of 6 lines 4 lines is for content and 2 lines is for footer (assume no standard heading), but if my report produces less content than 4 say 3 at run time ,then footer will not be displayed .Here again i have to set line count and footer as 5(2) in order to get the footer to be displayed ,so How can i achieve dynamic setting of the line count and footer,
Thanks,
Avinash

Use RESERVE,
START-OF-SELECTION.
RESERVE 6 LINES. "at the last of your code
This will trigger a page-break & footer will be displayed.

How to disable Switch Profile and Auxilliary Metadata set on UCM checkin screen?

We are using webcenter content 11.1.1.6 with Record Management component installed on top of it
While trying to checkin a new document from a normal checkin screen or from Manage attachments screen two options come at the top 'Switch Profile and Auxilliary Metadata set'
How can these options be disabled?

Hi,
The xExternalDataSet is already an empty string on the check in page
When i append &IsJava=1, the variables have these values
xExternalDataSet=
xExternalDataSet:isInfoOnly=1
xExternalDataSet:isSetDefault=1
Isn't there a config variable for this, as I see this component has come as part of record management but no option to disable when I configure record management
Thanks,
Gaurav

How to set custom profiles in iphone 5 and viewing sent messsges and dialed calls seperately

i found that i cannot set any other profiles other than silent and general is there any app to create custom profiles and also i can't view the dialed calls seperately only missed calls can be viewind seperately is there any app to overcome that problem?and also i want to view sent messages seperately in my messages option.

These are not a features of the iPhone and iOS. No 3rd party app can provide these functions due to Apple restrictions.

Set up profile and object to distribute report

Similar Messages

Maybe you are looking for