Set up structure S094 for trx. MCBZ

Dear.
Can you explain how can I set up structure S094 for the transaction MCBZ of the LIS ?
Thanks.

Please refer below thread .
[LIS & Info structure;
pavankulkarni

Similar Messages

Setting a Layer Break for GEAR Pro Mastering Edition with EncoreDVD & IFOEdit

Setting Layer Breaks Manually for Encore/GEAR Projects
Although we can write straight to a DVD+R DL disc directly out of EncoreDVD 2.0 and we can also create our Master DLT tapes directly out of EncoreDVD 2.0 also, there are times when these options simply are not sufficient.
For example - we wish to Verify the successful writing of a DLT Tape, or we wish to create a QC disc for our clients in DVD-R DL format.
Either way, the "option" of using a +R DL disc is often unacceptable.
Another very good reason for +R DL discs to be NFG is that they are NOT DVD-Video format, and as such tend to expect the layers 0 and 1 to be of equal size.
Yet another reason could simply be we are using EncoreDVD 1.01, which does not support direct writing of any DL discs at all.
The solution is to use GEAR Pro Mastering Edition to create your DLT or DVD-R DL disc directly from your Encore project instead.
And here's how you do it.
You are going to need copies of both GEAR Pro Mastering Edition, EncoreDVD (any version) and finally a copy of the freeware application IFOEdit http://www.ifoedit.com/. Additionally, we will also need the GEAR Layer Break Calcuulator, provided for free on their excellent support site at http://www.gearsoftware.com/support/documentation/layerbreakcalculator.xls
Now we are ready - lets look at how it is all done. Don't be put off by what looks like a lot of math here either - this gets easier every time you do it and all it takes is a little common sense and practise.
The best way to proceed is to use EncoreDVD to build your project to a folder. This will not make any Layer Break settings at all, and will allow us to create a new DL Project in GEAR and also allows GR+EAR to build the UDF/ISO structure for us.
So once we have written our tested and checked project to a folder, the next step is to close out of EncoreDVD and launch GPME. By the way - if you're not certain that you need the expense of GPME for a one-off project you can simply download their 30 day trial version and use this as it is 100% fully functional in every way - there are no limitations at all.
When GEAR loads, select to create a new DVD-Video project and be certain you tick the DVD9 box in this screen too. Another window will appear now asking you to locate the folder where the Video_TS files are stored. Point this at the Video_TS folder and GEAR will create a basic DVD9 project for you.
Next we need to load up the Excel Spreadsheet with the Layer Break Calculator we downloaded earlier. I always use a different machine for this as I don't have Office installed and any open source application that can read an XLS file will do the job. If you don't have one, I recommend either OpenOffice or Star Office to do this. There are a lot of helpful calculators in XLS mode, and you won't regret it. Just try to keep all this stuff well clear of your authoring system though. But I am rambling, and I'm sorry. Back to buiness.
Once we have loaded up our Layer Break Calculator, we need to enter in some numbers.
Back over in GPME, where we have our shiny new DVD9 project sat there waiting for instructions, there is a file structure on the lower left hand side of the project screen. Att the top of the list we should see something very much like "VOLUME (projectname) (DVD-Video ISO/UDF)"
Right-click on this, and select "Properties". A screen will appear with all sorts of numbers in it, and we ignore the lot of them except for the "Total Volume Size in Sectors" - which we need to write down, nip across the room to our spreadsheet, and type the number in right at the top where it says "Total Volume (project) Size"
Another set of (probably) meaningless numbers appears - and the 2 we are interested in here are the ones where it says "RULES" and specifically "Layer Break Point must be Greater than .....
And Less than.....
Write these 2 numbers down, and hop smartly back across to where we have our GEAR project open on our authoring machine. Or simply minimize the spreadsheet if we are doing all this on the same system.
We now need to click on the folder marked "Video_TS" in the bottom left of the GEAR screen, and on the lower right we need to click once on the bar in the middle above all the VOB files marked "start sector" to arrange all the files in the sequence they will be on the disc. This makes finding our VTS file so much easier.
Somewhere in that list there will be a file that has that range of numbers in it. If we are really lucky, there will be more than one, which means that one of these will soon become our Layer Break.
When we have identified the correct file, take a note of it's name - it will be VTS_01_4.VOB or something with a similar structure name wise.
Next, we need to write down and enter into the Layer Break Calculator the start sector number of the VTS_xx_1.VOB file that holds our values.
I will try to explain why. If our Sector range is to be found in the example we gave earlier, say VTS_01_4.VOB, we need to note the start sector of the file VTS_01_1.VOB. This is because all these VTS_xx_x.VOB files are all extensions of the same file. They are just in handy blocks so that the Computer can keep track of them without breaking any rules about file sizes. Anyway, we write down the Start Sector of the file VTS_xx_1.VOB where xx is the file where the Layer Break range is to be found.
Just to try & make the concept clear, if the range were found in the file VTS_05_5.VOB, our start sector we need to write down is VTS_05_1.VOB
Enter this into the Calculator/Spreadsheet in the place where it says "Chosen Video Object VTS_xx_1.VOB Start Sector.
Now this will tell us exactly where we need to look next, and tell us we now need to hunt for a cell start sector between a range of sectors.
It might be something like "1,148,678 and 2,051,052" sectors.
This is where IFOEdit comes in.
Launch IFOEdit - and you may as well go back to GEAR, and close the project - but not the application. Go to the "File" menu, and from the drop dow select "Delete GEAR Project" and delete the one we just created, as we will need to change it anyway. Why you will find out later on.
From IFOEdit, you will see 2 halves of a screen. Down the bottom left there is an "Open" button. Click on this and locate the Video_TS folder, and specifically the file VTS_xx_1.IFO, where xx is the file we know from earlier the Layer Break will be placed.
Immediately your head will start to ache, your eyes will glaze over & your brain will wave a little white flag, as some serious mathematics suddenly appears (Well, that's what happened to me the first time. I was too fascinated to be confused - sheer bewilderment is perhaps the best expression. And I still don't know what most of it is for.
The one we are interested in can be found in the upper half, and is called "VTS_PGCITI".
Click on this, and a lot of little others will appear immediately below it.
You will see VTS_PGC_1 and so on until you run out of blocks.
The odds are high our layer break will be in the longest file - but this does not always hold true, so we start at the top & work our way rapidly down. What we are looking for is twofold.
1 - A Cell Start Sector within our range defined earlier.
2 - A cell Start Sector flagged as "NON Seamless playback.
If we can fill both these criteria, we have our layer break.
Write this number down, and enter it into our spreadsheet - and close down IFOEdit as we are done with it for today.
Back in the Spreadsheet we are almost done. Once we enter this number in, it will helpfully calculate exactly where in our Virtual image from earlier that sector lies, and will check to see if it is divisible by 16. Don't worry for now why, just know that it has to do this.
The chances are high it will not be, so the spreadsheet will tell you how many sectors the whole image has to be shifted forwards by, and what the new Cell Start Sector is in this revised image. This is automatic, and you get 2 figures.
1 - Offset. This number will be between 0 and 15.
2 - Layer Break Sector.
Time to go back to GEAR, and in our "Options" drop-down menu we will have another one called "Preferences". In this, we need to tell GEAR to ask us for the start sector to be entered for each file.
Now we create our project again - but this time GEAR will ask us for the start sector of VIDEO_TS_IFO, and the figure 640 will be highlighted.
Add our offset figure we were given earlier to this so if our offset was 11, enter in 651.
GEAR will do all the rest automatically for you.
One more job to do now.
Go Back to "Options/Preferences", and under DVD we need to tell GEAR we are changing the Layer Break. Click on the "Change" button, and use the up/down arrows to arrive at our newly discovered Layer Break Value.
Save the project - we're done. And write down that offset & Layer Break whatever you do.
You can now write to DVD-R DL, DLT tapes (and if you right-click on your DLT drive in the lower "Devices" screen, and choose "Properties", you can tell GEAR to verify the tape after writing too. It will write both layers first, then verify each one.
There is, however, a minor "GOTCHA" in GPME when writing DLT tapes.
It is allowed to set the IDENT.TXT file to be included on the DLT tape by means of a tick box. However, as this file is not actually required for replication in DVD-Video, but only in DVD-ROM - GEAR will not include the file
i even if the box is ticked
but it
i does
add a pointer to the file in the DDPID file instead. The upshot of this is that a DLT tape where IDENT.TXT has been selected to be included will be
i rejected by the factory as unusable.
This is because when they try to verify the DDP image on the tape it will fail as IDENT.TXT is NOT on the tape.
You must ensure this box is NEVER TICKED - I fell for this one recently, and had to rework 7 DLT tapes.
There is yet another way to get a DL project to the factory if you do not have a DLT machine, and do not have access to DL discs in the correct format.
Write the DDP images to 2 single layer discs instead!
This requires the use of GEAR Pro Mastering Edition again, and is incredibly easy to do.
What you need to do here is follow the original guides in the FAQ sections for setting the Layer Break manually, but instead of writing the project to DLT tapes or to DVD-R DL/DVD+R DL media, what we do next is write the project to a DDP file on the HDD instead.
This will result in 2 folders appearing - Layer 0 and Layer 1.
Each of these has the necessary information for the replication plant to manufacture the discs - all we need to do is get them onto 2 discs instead of 2 DLT tapes.
This is simplicity itself.
Launch your burning application.
Create a new DVD-ROM project.
Name it (Project)_Layer_1
Broswe to the 2 folders with the DDP files in them, and add the contents in this exact order
DDPID
CONTROL.DAT
IMAGE.DAT
(Checksum.txt - optional)
(Log file - optional)
Burn the disc.
Repeat for Layer 1.
That is all there is to it.
What will happen at the factory is the Eclipse verification system will look for the DDPID file at the root level of the disc. If it cannot find it, it will assume it is dealing with a standard DVD-ROM disc instead, but if it is there it will know what is going on, load the files, and ask for Layer 1 after it has finished in the normal manner.
I hope this helps out - if not, please post in the main forums, and I'll try to help out.

Hi Ryan,
Yes, you'll only get the LB sector number when you format with one of the "tape images" (go with DDP 2.0). And unfortunately, Gear doesn't allow transfer of DDP or CMF Images to DLT.
Gear is working on a version that will incorporate DVD-9 making within the program.
Meanwhile, If you go with the instructions on their site to create a DVD-9, be sure to add: "correct VTS sectors" in the VIDEO_TS folder with IFOEdit, and set the region info in the VMGM_MAT to "0"; and be sure to flag all instances of a cell properly for the layer break, in the case they reside in any Stories that span the Layers.
But if I may; It's highly recommended that you hire out tests on the resulting DDP image to make sure the layer break did indeed fall where you expected, and that there are no other issues (Same goes with any DDP image destined for replication, created by any other program).
Or better yet, consider hiring someone to premaster for you (I wonder who? , who also includes navigation proofing, spec compliance testing (MEI and sometimes with a player bank) and verifying the finished Image (EclipseSuite); all for one low fixed price, i.e. no charge in the event a resubmission to me is required (pre consultation, also included, nips lots of common mistakes in the buds). This insures that only a bullet-proof Image is finally sent in to the replicator.
There I go with commercials again! But for sure, Gear's current DVD-9 method is not for the faint of head; and premastering in general, is not the innocuous activity it appears to be. Real trouble eventually awaits (unless measures are taken), due to the nature of the critter.
Take care,
Trai

Setting up separate accts for kids - how to associate acct with their device?

I've seen many discussions on this topic, but I am still confused. I want to have more structure around how much my kids spend on iTunes - mostly games and apps. I also want them to have more autonomy using their iPod touches. So, I created 2 iTunes accounts for them and set up an allowance for each. I want all three accounts and devices (my iTouch and their two iTouches) to sync to one Library on our one iMac. I've gone into my daughter's device and "connected" it to her new iTunes account - but what is it supposed to look like when I log into the iTunes account? If I log into her iTunes account on the computer - should I see her device associated with that account? Right now I don't. Should I remove it from the list of associated devices on MY account? Can we all still share the music in our ONE library? I don't know what to do next...thanks.

Do you want to share purchases among the different devices?
Note:
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

Setting the colour red for an input field or a text-field in a table

Hy,
I am using an input-field or text-field within a table-cell. For some rows in the table the text in the input-field / text-field should be red. How can I do this ?
Florian Hroch

Create a new attribute "TextColor" of type "com.sap.ide.webdynpro.uielementdefinitions.TextViewSemanticColor" (local DDIC types), under the table's data source node.
Bind the "TextView.semanticColor" property of the table cell editor to this attribute.
If you cannot add new attributes under the data source node (this is the case if there is a structure binding), add a value node "TableProperties" (cardinality 1:1, selection 1:1) under the data source node and add the attribute there.
Then you can control the color of the TextView in table row at index i by setting the "TextColor" value for node element at index i.
For an input field, you cannot set the text color, a workaround might be adding an icon in an extra column.
Armin

Trouble Setting the structured app on import - FS_StructuredImportApplication

Hello All,
I have some referenced documents that I refresh when opening the parent document and I am trying to set the structured application on import.
I am using>
        var importParams = GetImportDefaultParams();
                        i=GetPropIndex(importParams,Constants.FS_StructuredImportApplication);
                        importParams[i].propVal.ival= "myStructApp";
                        alert(importParams[i].propVal.ival);
I expect the alert to return "myStructApp" , which exists in the list of structured apps. However, my alert returns 0.
What am I doing wrong please?
thanks,
Tracey
[Thread moved to Scripting Forum by moderator]

Hi eh1160,
I'm not sure if your issue is now resolved, but since this is an open thread, I thought I would respond and give you a couple of things to try.
Firstly, make sure the Bonjour service is running on your PC. This is required for iTunes to communicate with other devices on a network. To do this, right click on 'Computer', and select 'Manage'. You'll should see "Services and Applications", expand that, then select 'Services'. You could also try restarting the service if it is there, or re-install it in Control Panel.
Secondly, while you're there looking at the list of services, check that 'Routing and Remote Access' is enabled and running, and set to start automatically.
I hope that helps! Looks like you have already check the obvious things like the firewall, and iTunes settings...
All the best,
r4m0n

Issue:Structure explosion for item 000020 is not possible...

Hello all,
i am getting this error when i am creating the sales order.so where i have to do the setting for resolving this issue.
Structure explosion for item 000020 is not possible
Message no. V1578
Diagnosis
You have tried to carry out a structure explosion within an exploded structure, but this is not possible.
For example, the system finds one component and one item category within an exploded BOM that leads to another BOM explosion in document processing. This is not possible because you can only explode a multi- level BOM and the explosion can only start with a document item that has not been generated by the previous explosion.
Similar problems occur when combining BoM explosion and product selection.
System Response
The system does not carry out the lower-level explosion.
Procedure
Configure the settings in Customizing, so that sub-items do not lead to another explosion. It might be that the wrong item category was determined for the sub-item.
Regards
Subrat

Dear G. Lakshmipathi,
my requirement is very simple
i have two levels one is header level material and another is child level material.
the stocks will be at child level
pricing will be at header level
so what will be will be the item catagory group and item catagory for header level item and for the child level item.
please help
Regards
Subrat

Setting Preferences--Structured Authoring cause FM11 to crash

Hello,
I changed Preferences setting to Structured Authoring. I was prompted to restart FrameMaker 11.x.
When I tried to open a file, I got this error message:
Any suggestions on what I might have done wrong? If there is a bug or workaround for this, I would love to find it. Thanks! Laura Ferrer

Hi Arno!
Did you happen to change the Short Name of your Home folder?
If so, review the articles linked to below.
Return to Default Desktop, Apparent "Loss" of Home Directory
My home folder and desktop are different than before
Recover from renaming your Home folder, authored by Dr Smoke
"...I usually have between 4 to 8 Gb available on my 'Macintosh HD'"
Depending on the size of your HD, that may not be sufficient.
Insufficient available space, can cause performance issues, system corruption, and possible loss of data.
Depending on Mac system usage habits, it is a general recommendation, to keep 10% to as much as 20%, of the Total capacity, available at all times.
Review the suggestions, in the documents that I have linked to below.
Authored by Dr Smoke:
Problems From Insufficient RAM And Free Hard Disk Space
Freeing Space On Your Mac OS X Startup Disk
Have you ever run any routine Maintenance procedures, as suggested in the articles linked to below?
Mac OS X 10.3/10.4: System Maintenance, authored by Gulliver
Maintaining Mac OS X, authored by Dr Smoke
ali b

Converting large complex unstructured set to structured.

I am converting a large complex unstructured doc set to Structured Frame. I'm starting off with Tom Aldous' webinars. I have many questions. First, I am performing my conversion to DITA (because this is how the webinar guides us). Is this the best format to use? I will have PDF User Guide with multiple role based outputs and Robohelp Webhelp output. Am I better with a DITA or Custom Structure?
I am using TCS 3.

Amy,
   I don't know what experience you have in working with XML, structured documents, EDDs, conversion tables, read/write rules, application definition files, and the other components of a FrameMaker structure application. You may not need them all. Especially if you are new to structure in general, I recommend that you don't try to learn everything at once. Start with something you do need--a structured template and an EDD and branch out to other components as you need them. It is always tempting to start by converting legacy documents. If your schedule permits, I recommend first setting up a structured template that you can use to experiment with structured documents. If you start with the conversion table, you may wind up with a structure that is optimized for adding structure to existing material rather than editing it once it's been structured.
   As far as the question of whether to define your own structure or use an existing one, I do not agree with the logic that using an existing model (such as DITA) gets you started earlier and saves you analysis time. Structure is all about organizing content, that is, organizing ideas and your project will provide the most benefit if you take time for planning at the beginning. That analysis might take the form of designing your own structure; it may take the form of figuring out how the elements and attributes defined in an existing model map into your own content. Remember that the industry-standard models are designed to apply to the documentation needs at many companies. They often make great examples for preliminary study, but they tend to be huge and much more complex than you may need. If you decide to go that route, strongly consider using a subset or specialization of the original model.
    Using a large tag set off the shelf is parallel to using a word processor without a style sheet. If the model was designed to let writers create almost anything, the model won't help writers create documents that conform to their own company's conventions. For example, one benefit of FrameMaker structured editing as compared to unstructured editing is that the context-sensitive available elements listed in the structured Element Catalog show only elements the writer is likely to need at the current point in the document. In contrast, the Paragraph and Character Catalogs show all defined catalog entries. Thus, if certain formats are only available within front matter or only for a title at the beginning of a larger unit, the format catalogs still show them everywhere. Suppose you start with a model that allows dozens of inline elements within a paragraph (emphasis, foreign phrase, part number, keyword, quotation, and so forth). If writers at your organization never use more than five of the inline elements, set up your application so that those five are the only ones listed.
   One of DITA's original design goals was to reduce the overhead that large companies like IBM required to publish documentation from new partners. The only way that goal could be achieved was with permissive rules for what's allowed where. Yes, DITA can be customized to support more stringent rules. Learning how to do so is part of the cost of using DITA. That expense may be worth it, but recognize it is there.
The dividing line between a custom structure and a customization of one that is widely available may be blurry. My mother once had a cookbook with a recipe that concluded something like "bake for 20 minutes, or more, or less, it all depends." Designing a structured environment is similar. It all depends.
   --Lynne

HT204053 i accidently set up one account for i cloud and one for itunes. suggestions on how do i update this to only the one. please on how do i change my icloud to be the same as my itunes acct. thanks

i accidently set up one account for icloud and one for itunes; suggestions on how to correct this and use just one account for both.... thanks

If you want to change your iCloud ID to another existing ID you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account. To do this, first go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
This will not move your photo stream, however. If you have photos in photo stream that aren't in your camera roll and that you haven't backed up anywhere else you will need to save these before deleting the account. To do this, open your photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos to select them, tap Share, then tap Save to Camera Roll. You can then delete the iCloud account and your photos will stay in your camera roll.

HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014

How to set up Dynamic Variants for job which is based on Pay Period

Hi,
We need to set up dynamic variant for payroll interface. This interface is based on Pay periods and that is why we need to use different variant for each month. Letus know how to set up dynamic variant which will take care of Pay Periods

Hi, Thnx for reply.
We are not changing the control records, current period will be some old period in system.
payroll is not processed in SAP,

Issue in setting custom identity service for soa 11.1.1.4

Hello,
I am facing issue in setting custom identity service for soa 11.1.1.4
It is not picking up the implemented UserManager (in custom IDM) implemented via ServiceProvider and IdentityStoreService.
This is configured in jps-config.xml
The same setup was working in soa 11.1.1.2
I believe there is a change done in JpsProvider in bpm-service.jar to authenticate via default login context from oracle.security.jps.internal.jaas.module.authentication.JpsUserAuthenticationLoginModule
If my uderstanding is correct,
Please guide me in implementing custom identity store and services for bpm services for soa 11.1.1.4
Tried various work arounds but no luck.
Thanks
Bala

Hi...
Can u tell me how did u set up custom identity service for 11.1.1.2 ?
Thanks

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

Set up structure S094 for trx. MCBZ

Similar Messages

Maybe you are looking for