Set up Virtual IP and Private IP for each node in RAC installation

I am new to Oracle 10G RAC installation, based on the documentation, I need to assign a public IP, Virtual IP, private IP for each node, I know how to assign public IP for each node, I can assign the IP from the router, but I don't know how to assign the Virtual IP and private IP, since the private network is only connected by a switch, the switch is not able to assign IP to server, should I just go to the host file
%SystemRoot%\system32\drivers\etc\hosts
of each node to put IP in the file? what else should I do? I already read through the document from Oracle "Oracle Real Application Clusters, Quick Installation Guide for Oracle Database Standard Edition 10g Release 1 for window".

I am still keep thinking why each node need a virtual IP address? if each mode has a virtual IP, which IP address the client can be specified? I have multiple application servers work as clients.

Similar Messages

Working set, virtual bytes and private bytes

Hello everyone,
I am using Windows Server 2003 Performance Counter tool to monitor the memory consumed by my process.
The interested terms are working set, virtual bytes and private bytes. My questions are,
1. If I want to watch the real physical memory consumed by current process, which one should I monitor?
2. If I want to watch the physical memory + swap file consumed by current process, which one should I monitor?
3. Any more clear description of what these terms mean? I read the help from Performance Counter tool, but still confused
which one(s) identifies the real used physical memory, and which one(s) identifies the real used physical memory + page swap file, and which one(s) identifies the required memory (may not be really allocated either in physical memory or in swap page file).
If there are any related learning resource about the concepts, it is appreciated if you could recommend some. :-)
thanks in advance,
George

And for further benefit:
"Virtual bytes" is the total size of the not-free virtual address space of the process. It includes private committed, mapped, physically mapped (AWE), and even reserved address spaces.
"Private committed" is the portion of "virtual bytes" that is private to the process (as opposed to "mapped", which may be shared between processes; this is used by default for code). This normally includes program globals,
the stacks (hence locals), heaps, thread-local storage, etc.
Each process's "private committed" memory is that process's contribution to the system-wide counter called "commit charge". There are also contributions to commit charge that aren't part of any one process, such as the paged pool.
The backing store for "private committed" v.m. is the page file, if you have one; if you have (foolishly in my opinion) deleted your page file, then all private committed v.m., along with things like the paged pool that would normally be backed
by the page file, has to stay in RAM at all times... no matter how long ago it's been referenced (which is why I think running without a page file is foolish).
The "commit limit" is the size of RAM that the OS can use (this will exclude RAM used for things like video buffers) plus the total of the current size(s) of your pagefile(s). Windows will not allow allocations of private committed address space
(e.g. VirtualAlloc calls with the COMMIT option) that would take the commit charge above the limit. If a program tries it, Windows will try to expand the page file (hence increasing the commit limit). If this doesn't succeed (maybe because page file expansion
is disabled, maybe because there's no free disk space to do it) then the attempt to allocate committed address space fails (e.g. the VirtualAlloc call returns with a NULL result, indicating no memory was allocated).
The "Working set" is not quite "the subset of virtual pages that are resident in physical memory", unless by "resident" you mean "the valid bit is set in the page table entry", meaning that no page fault will occur
when they're referenced. But this ignores the pages on the modified and standby page lists. Pages lost from a working set go to one of these lists; if the modified list, they are written to the page file and then moved to the standby list. From there they
may be used for other things, such as to satisfy another process's need for pages, or (in Vista and later) for SuperFetch. But until that happens, they still contains the data from the process they came from and are still associated with that process
and with that processes' virtual pages. Referring to the virtual page for which the physical page is on the standby or modified list will result in a "soft" page fault that is resolved without disk I/O. Much slower than referring to a page that's
in the working set - but much faster than having to go to disk for it.
So the most precise definition of "working set" is "the subset of virtual pages that can be referenced without incurring a page fault."

Is it Possible to set Top and Bottom Margin for each section?

I've been googling and haven't found an answer to this problem.
I need to specify a different top and bottom margin for each section in my document. The "document margins" apply to the whole document, so I've set those to a low amount, and I can set the Layout Left and right margins - but the "Layout Margins" do not allow "top and bottom" only "before and after". This is a critical difference, because if you have 2 pages in a section, only the first page gets the "before" margin, and only the 2nd page gets the "after" margin. This is a little odd, and I'm frankly surprised we are in version 4 of this app - and you can't set top and bottom margins for each section.
If you insert a "layout break" on each page, then you can get the margins to reset for each page inside a section, but this is not an acceptable workaround as I need to setup templates for staff to use that will "flow" like a normal word processor.
Does any one have any suggestions?

On page 49 in the English Guide version it tells you about Lay-out margins. This is the text
*Defining Layout Margins*
*In a word processing document, a layout margin is the space around columns in a*
layout.
*To change the layout margin in a word processing document:*
*1 Click in a column.*
*2 Click Inspector in the toolbar, click the Layout button, and then click Layout.*
*3 To change the outside margins of the column(s), enter values in the Left and Right*
*fields under Layout Margins.*
*4 To specify the amount of space above and below the column(s), enter values in the*
*Before and After fields under Layout Margins.*
*The new margins can’t extend outside the page margins set for the document in the*
*Document inspector.*
I hope this helps.

How to find public and private url for an EBS instance?

I am asked to find public and private url for an instance. I did in the following way. Can u please correct me if following is wrong.
1) Go to .xml file.
2) found s_external_url and corresponding entry is public URL.
3) found s_login_page and corresponding entry is private URL.
Please correct me any thing is wrong.
Regards
DBA.

please give a hand. online waiting....
thanks....

How to set the gain and input coupling for each channel on a NI 4462 DaQ card?

I've seen a few examples in how to set the gain for NI 4462, but none tell me how to chose the channel I wish to set this gain. Also the same problem with input coupling
Does anyone know how to set the gain and input coupling for each individual channel?
Thanks,
Hector
LabView 8.5 Windows XP

Hey Hector,
http://forums.ni.com/ni/board/message?board.id=100&thread.id=1688
This has a few examples of how to do that. Let me know if you have further questions.
Have fun!
-gaving

Property and Property Definition for a Node

Hi all,
While retrieving meta data for each node, I could not understand whether Property for a node represents meta data or Property Definition. Please provide a clear understanding and difference between the two.
Second, is there a predefined fixed set of Property and Property Definition for a node (for any given portal application)?
Provide inputs.
Thanks,
Shakti

Hi Shakti,
A node has two types of metadata -- the built-in system metadata such as node name, node path, node objectClass, create date, modified date, created by, etc -- visible via getXXX methods on the Node object, and the user-defined metadata.
The system metadata applies to all nodes regardless of ObjectClass (and also to nodes without any ObjectClass).
The user-defined metadata depends on the Node's ObjectClass. A node with no objectClass cannot have any user-defined metadata. A node with an objectClass can have the metadata defined by the ObjectClass's Property Definitions.
Suppose Node n has ObjectClass "StringType", and StringType ObjectClass has two property definitions -- StringVal (single-valued string), and BinaryVal (single-valued binary). In this case, Node n can have zero, one, or two user-defined properties from the set 'StirngVal' and 'BinaryVal'.
In short, a PropertyDefinition is a schema, part of the ObjectClass definition, whereas a Property is an instance of a PropertyDefinition attached to a node of the ObjectClass.
-Steve

Production Order and Internal Order for each item of the sales order

Hi
   I am developing Make To Order Report where I have to display the MTO Line Items and non MTO Line Items. For non MTO Line Items I have to display Internal order with Planned and Actual Costs and also Production Order with Planned and Actual Costs. Could anybody tell how to get the Internal order no and production order with Planned and Actual costs for each line item for a sales order.
Thanks
Naga

Hi,
You can get the Production orders, Planned orders, Internal orders generated for Sales order item from AFPO table (use fields KDAUF-Sales order number & KDPOS-Sales order item). Then to identify the order type use order category (AUTYP) from table AUFK.
Once you have the Production/internal order, you can ge the cost from COSS and COSP table. Use the object number from AUFK to get the cost entries from COSS & COSP.
You can use the following sample code as reference.
Hope this is helps.. (Don't forget to mark it... )
Form GET_COSTS                                                       *
Get the material cost, labour hours and the labour cost for the      *
sales order material.                                                *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_COSTS.
DATA V_OBJNR LIKE AUFK-OBJNR.
DATA v_menge LIKE vbap-kwmeng.
SELECT SINGLE OBJNR
    INTO V_OBJNR
    FROM AUFK
   WHERE AUFNR EQ AFPO-AUFNR.
SELECT * FROM COSS
   WHERE OBJNR EQ V_OBJNR
     AND WRTTP IN ('01', '04'). " p_wrttp. "Labour Cost ( Plan, Actual)
    PERFORM GET_VALUES_FROM_COSS.
ENDSELECT.
SELECT * FROM COSP
   WHERE OBJNR EQ V_OBJNR
     AND WRTTP IN ('01', '04')         " p_wrttp
     AND KSTAR NE '0000510033'. " EQ p_kstar2.      "Material Cost
    PERFORM GET_VALUE_FROM_COSP.
ENDSELECT.
Get the unit cost of the production order by dividing the production
cost by the order quantity. The result will be multiplied by the
GL posting qunatity (Delivery quantity) to get the production cost
for the quantity being deluivered.
IF NOT AFPO-PSMNG IS INITIAL.
    OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_HOURS_ACT =
                      OUT_REC-ADDNL_LABOUR_HOURS_ACT / AFPO-PSMNG.
    OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_HOURS_PLN =
                     OUT_REC-ADDNL_LABOUR_HOURS_PLN / AFPO-PSMNG.
    OUT_REC-LABOUR_COST_ACT = OUT_REC-LABOUR_COST_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_COST_ACT =
                     OUT_REC-ADDNL_LABOUR_COST_ACT / AFPO-PSMNG.
    OUT_REC-LABOUR_COST_PLN = OUT_REC-LABOUR_COST_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_COST_PLN =
                     OUT_REC-ADDNL_LABOUR_COST_PLN / AFPO-PSMNG.
    OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_MATERIAL_COST_ACT =
                     OUT_REC-ADDNL_MATERIAL_COST_ACT / AFPO-PSMNG.
    OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_MATERIAL_COST_PLN =
                     OUT_REC-ADDNL_MATERIAL_COST_PLN / AFPO-PSMNG.
ENDIF.
Multiply the calculated Unit Production costs with the GL quantity to
get the actual production cost of the quantity delivered.
Calculation for Labour Hours
OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT *
                             OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_HOURS_ACT = OUT_REC-ADDNL_LABOUR_HOURS_ACT *
                             OUT_REC-QUANTITY.
OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN *
                             OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_HOURS_PLN = OUT_REC-ADDNL_LABOUR_HOURS_PLN *
                             OUT_REC-QUANTITY.
Calculation for Material Cost
OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_MATERIAL_COST_ACT =
      OUT_REC-ADDNL_MATERIAL_COST_ACT * OUT_REC-QUANTITY.
OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_MATERIAL_COST_PLN =
      OUT_REC-ADDNL_MATERIAL_COST_PLN * OUT_REC-QUANTITY.
Calculation for Labour cost
OUT_REC-LABOUR_COST_ACT   = OUT_REC-LABOUR_COST_ACT *
                               OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_COST_ACT = OUT_REC-ADDNL_LABOUR_COST_ACT *
                              OUT_REC-QUANTITY.
OUT_REC-LABOUR_COST_PLN   = OUT_REC-LABOUR_COST_PLN *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_COST_PLN = OUT_REC-ADDNL_LABOUR_COST_PLN *
                              OUT_REC-QUANTITY.
Get the planned material cost from the total of the planned cost of
the component materials in the production order confirmations.
SELECT BWART MENGE MATNR SHKZG FROM AUFM
    INTO (AUFM-BWART, AUFM-MENGE, AUFM-MATNR, AUFM-SHKZG)
   WHERE AUFNR EQ AFPO-AUFNR.
    CHECK AUFM-BWART NE '101'.
    READ TABLE I_MBEW WITH KEY MATNR = AUFM-MATNR
                               BWKEY = AFPO-DWERK.
    IF SY-SUBRC NE 0.
      SELECT MATNR BWKEY ZPLPR LPLPR PEINH
        FROM MBEW
        INTO I_MBEW
       WHERE MATNR EQ AUFM-MATNR
         AND BWKEY EQ AFPO-DWERK.
        APPEND I_MBEW.
      ENDSELECT.
    ENDIF.
    IF SY-SUBRC EQ 0.
      IF I_MBEW-ZPLPR NE 0.
        IF AUFM-SHKZG EQ 'H'.
          OUT_REC-PLANNED_MATERIAL_COST =
          OUT_REC-PLANNED_MATERIAL_COST +
                       ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ELSE.
          OUT_REC-PLANNED_MATERIAL_COST =
          OUT_REC-PLANNED_MATERIAL_COST -
                       ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ENDIF.
      ELSEIF I_MBEW-LPLPR NE 0.
        IF AUFM-SHKZG EQ 'H'.
          OUT_REC-CURRENT_MATERIAL_COST =
          OUT_REC-CURRENT_MATERIAL_COST +
                       ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ELSE.
          OUT_REC-CURRENT_MATERIAL_COST =
          OUT_REC-CURRENT_MATERIAL_COST -
                       ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ENDIF.
      ENDIF.
    ENDIF.
ENDSELECT.
Get the Future material cost per Unit by deviding the calculated
Future material cost above with the goods reciept quantity to, then
multiply the unit cost with the GL quantity to get the Future material
Cost for the Quantity delivered. (Quantity in the entery from GLPCA
Table).
IF NOT AFPO-WEMNG IS INITIAL.
    OUT_REC-PLANNED_MATERIAL_COST =
       OUT_REC-PLANNED_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
    OUT_REC-CURRENT_MATERIAL_COST =
       OUT_REC-CURRENT_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
ENDIF.
ENDFORM.                               " GET_COSTS
Form GET_VALUE_FROM_COSP                                             *
Get the Material cost from COSP table.                               *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_VALUE_FROM_COSP.
FIELD-SYMBOLS: <FS> TYPE ANY.
DATA: V_COMPONENT TYPE I.
Cummulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the aprtial posting of
prodction order values in diffrent periods.
V_COMPONENT = 15.
DO 16 TIMES.
    ADD 1 TO V_COMPONENT.
    ASSIGN COMPONENT V_COMPONENT OF STRUCTURE COSP TO <FS>.
    IF COSP-WRTTP EQ '04' AND COSP-KSTAR EQ P_KSTAR2.
      ADD <FS> TO OUT_REC-MATERIAL_COST_ACT.
    ELSEIF COSP-WRTTP EQ '04'.
      ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_ACT.
    ELSEIF COSP-WRTTP EQ '01' AND COSP-KSTAR EQ P_KSTAR2.
      ADD <FS> TO OUT_REC-MATERIAL_COST_PLN.
    ELSEIF COSP-WRTTP EQ '01'.
      ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_PLN.
    ENDIF.
ENDDO.
ENDFORM.                               " GET_VALUE_FROM_COSP
Form GET_VALUES_FROM_COSS                                            *
Get the Labour cost and Labour hours from the COSS table.            *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_VALUES_FROM_COSS.
FIELD-SYMBOLS: <FS1> TYPE ANY,
                 <FS2> TYPE ANY.
DATA: V_COMPONENT1 TYPE I,
        V_COMPONENT2 TYPE I.
Cummulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the aprtial posting of
prodction order values in diffrent periods.
V_COMPONENT1 = 15.
V_COMPONENT2 = 111.
DO 16 TIMES.
    ADD 1 TO: V_COMPONENT1, V_COMPONENT2.
    ASSIGN COMPONENT V_COMPONENT1 OF STRUCTURE COSS TO <FS1>.
    ASSIGN COMPONENT V_COMPONENT2 OF STRUCTURE COSS TO <FS2>.
    IF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ P_KSTAR1.
      ADD <FS1> TO OUT_REC-LABOUR_COST_ACT.
      ADD <FS2> TO OUT_REC-LABOUR_HOURS_ACT.
    ELSEIF COSS-WRTTP EQ '04'.
      ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_ACT.
      ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_ACT.
    ELSEIF COSS-WRTTP EQ '01' AND COSS-KSTAR EQ P_KSTAR1.
      ADD <FS1> TO OUT_REC-LABOUR_COST_PLN.
      ADD <FS2> TO OUT_REC-LABOUR_HOURS_PLN.
    ELSEIF COSS-WRTTP EQ '01'.
      ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_PLN.
      ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_PLN.
    ENDIF.
ENDDO.
ENDFORM.                               " GET_VALUES_FROM_COSS

Report that shows the PO and PR number for each FI doc # of invoice posting

Hi
I want a report in SAP for PO and PR no. for each FI doc.
Thanks & Regards

There is no standard report. Through development or BI.

I have four devices on one Apple ID, i have separate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.

I have four devices on one Apple ID, i have seperate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use. I have tried many things and the only guess I have is that either someone else has this email as their iMessage but is fake or it wasn't taken off my old iPod when I reset it. Any ideas on what to do?

Thanks but that doesn't give me the information I need. I am putting an email on my ipod for people to contact me for iMessage and FaceTime but when I put the email in, it gives me an error saying that the email cannot be veirified because it is already in use. My Apple ID can be varified, just not the email that they will contact me with.

How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

Hi,
Sorry, we do not support a matrix-question field. Please try the multilines text field (where your participant can enter multiple lines in the input text box) and see if it works for you.
Thanks,
Lucia

Planned and actual consumption for each confirmation

Dear All,
There is a production order. it has two operations. i have made three confirmations of each operation for that order. now i want to see the planned and actual consumption for each confirmation. how is it possible.
However i know that on order we can see planned and actual consumption but it is for total order but i want to see planned and actual consumption for each confirmation. Actually client wants that on 2nd confirmation what is planned consumption and what they consumed on actual. thanks

Hi,
In standard SAP this type of report not be there, but u can make it by using BOM,Confirmation table, & material document table.
Use AFRU to get posted document no for confirmation & detail by joining it with MSEG by mblnr & MAZHR.
now u get plan component qty by using mast & stpo if ur bom not changed in Production order , if in order component may be change then use afko & resb table & by comparing base qty or order qty & confirmation qty get plan component qty for confirmation.
Thanks
Rakesh

SQL Selecting the first and last entries for each day

Hello SQL experts,
I hope you can help with this.. I have a table (could have 1M or more rows in it) see structure below. I am looking to get the first and last date/times for each employee for each day. I also need the location GUID for the first read.
EmployeeGUID (uniqueidentifier datatype)
LocationGUID (uniqueidentifier datatype)
DateTime (DateTime datatype)
12345678-0000-0000-0000-000000000000
11111111-0000-0000-0000-000000000000
04/12/2014 07:00:01
12345678-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/12/2014 10:40:05
12345678-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/12/2014 17:04:02
44422222-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/14/2014 08:00:00
44422222-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/14/2014 14:00:03
44422222-0000-0000-0000-000000000000
33333333-0000-0000-0000-000000000000
04/15/2014 07:49:00
44422222-0000-0000-0000-000000000000
11111111-0000-0000-0000-000000000000
04/15/2014 09:00:01
This would be the ideal output (I can do without the TotalTimeInHours):
EmployeeGUID (uniqueidentifier datatype)
LocationGUID (uniqueidentifier datatype)
FirstRead (DateTime datatype)
LastRead (DateTime datatype)
TotalTimeInHours
12345678-0000-0000-0000-000000000000
11111111-0000-0000-0000-000000000000
04/12/2014 07:00:01
04/12/2014 17:04:02
Total in hours between the first and last read.
44422222-0000-0000-0000-000000000000
22222222-0000-0000-0000-000000000000
04/14/2014 08:00:00
04/14/2014 14:00:03
44422222-0000-0000-0000-000000000000
33333333-0000-0000-0000-000000000000
04/15/2014 07:49:00
04/15/2014 09:00:01
I would post what I have tried so far but I have been trying many different types of queries over the last few days. In short I need the employees first and last reads for each date. They could have many entries per date or just 1. I am certain that this
is a trivial thing for a SQL expert but not trivial for me :).
Thank you in advance!

Thank you!
This is almost what I need. The LocationGUID has to be included in the output. When I include it, I have to put it in the Group By clause. When I do that the reads are based on the LocationGUID (see below).
** I added a few more data entries and included the LocationGUID in the output.
***** SQL ***********
CREATE TABLE test( EmployeeGUID uniqueidentifier, LocationGUID uniqueidentifier, DateTimeCol DateTime )Insert into test values
('12345678-0000-0000-0000-000000000000','11111111-0000-0000-0000-000000000000','04/12/2014 07:00:01')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/12/2014 10:40:05')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/12/2014 17:04:02')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/12/2014 19:00:00')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/14/2014 08:00:00')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/14/2014 14:04:03')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/15/2014 07:49:00')
,('44422222-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/15/2014 09:00:01')
,('12345678-0000-0000-0000-000000000000','11111111-0000-0000-0000-000000000000','04/13/2014 10:40:05')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/13/2014 17:04:02')
,('12345678-0000-0000-0000-000000000000','22222222-0000-0000-0000-000000000000','04/13/2014 19:00:00')
;with mycte as (
SELECT *, row_number() OVER(partition by EmployeeGUID, Cast(DateTimeCol as date) Order by DateTimeCol) rnASC,
row_number() OVER (partition by EmployeeGUID, Cast(DateTimeCol as date) Order by DateTimeCol DESC) rnDESC
FROM test)
Select EmployeeGUID ,Cast(DateTimeCol as date) dt,LocationGUID,
Max(Case when rnASC=1 Then DateTimeCol End) minDateTimeCol
,Max(Case when rnDESC=1 Then DateTimeCol End ) maxDateTimeCol
,Datediff(minute, Max(Case when rnASC=1 Then DateTimeCol End) ,Max(Case when rnDESC=1 Then DateTimeCol End ) )/60.0 TotalTimeInHours
from mycte
Group by EmployeeGUID, LocationGUID,Cast(DateTimeCol as date)
Order by dt,EmployeeGUID
drop TABLE test
**** OUTPUT **********
EmployeeGUID
dt
LocationGUID
minDateTimeCol
maxDateTimeCol
TotalTimeInHours
12345678-0000-0000-0000-000000000000
2014-04-12
11111111-0000-0000-0000-000000000000
2014-04-12 07:00:01.000
NULL
NULL
12345678-0000-0000-0000-000000000000
2014-04-12
22222222-0000-0000-0000-000000000000
NULL
2014-04-12 19:00:00.000
NULL
12345678-0000-0000-0000-000000000000
2014-04-13
11111111-0000-0000-0000-000000000000
2014-04-13 10:40:05.000
NULL
NULL
12345678-0000-0000-0000-000000000000
2014-04-13
22222222-0000-0000-0000-000000000000
NULL
2014-04-13 19:00:00.000
NULL
44422222-0000-0000-0000-000000000000
2014-04-14
22222222-0000-0000-0000-000000000000
2014-04-14 08:00:00.000
2014-04-14 14:04:03.000
6.066666

Get Start and End times for each step in a job

Can someone tell me how to get the start and end times for each step in a background job? Table TBTCP only stores the time that the step was saved in a background job. Table TBTCO stores the times for the entire job and not each individual step.
Thanks.
Ryan

Hi,
Please check this tables and FM perhaps they may help
TBTCJSTEP - Background Job Step Overview
TBTCR - Batch scheduler execution time
TBTCS - Background Processing: Time Schedule Table
GET_JOB_RUNTIME_INFO
Regards,
Ferry Lianto

How do I set up my ipad2 and MacBook to FaceTime each other when I am the user on both? Ie my apple account....

How do I set up my ipad2 and MacBook to FaceTime each other when I am the user on both? Ie my apple account....is on both?

To locate people, you should use the free "Find my Friends" service and app.
See: http://www.apple.com/icloud/features/find-my.html

Need to give allowance base on time and gred. For each coverage has diffrence rate. for Executive.

Hi,
Please help me to configure for this issue
Need to give allowance base on time and gred. For each coverage has diffrence rate. for Executive.
Gred
1st Shift(Morning)
2nd Shift (Evening)
3rd Shift (Night)
E07 - E08
RM100
RM120
RM140
E12 - E13
RM140
RM160
RM180
E14 - E17
RM190
RM210
RM230
Thank you,
Vidya

Go through below link it helps you to resolve the issue.
Re: need give amount 600 for particular shift and particular personal area and this amount need calculated through sch…
Before raising the thread just go through community and check any similar kind of queries are there or not so that it reduces the work of you and you will get some info as well.
After going through the link you have any queries let us know and try to understand what is there in the thread.
Regards
Venkatesh

Set up Virtual IP and Private IP for each node in RAC installation

Similar Messages

Maybe you are looking for