Set="yes" linkindex="15" ??

I was going through a site I'm working on and adding title
attributes to my links when I found a strange bit of code that had
been placed in between my "<a" and my "href=" . . . does anyone
have a clue as to what this code doing and how it may have gotten
there? When I originally created the page, I just copied the
content from an existing page and pasted it into Design view, but
the extra mystery code was not in the source file when I went back
and checked.
<a set="yes" linkindex="15"
href="../folder/file.php">Anchor Text</a>

Neither of those are valid HTML usages. Leaving them there
will cause your
page to fail validation. How did that get there? It must have
been in the
source file. Are you sure that you cannot find it there? DW
does not
insert such pseudo-attributes....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Ephricon Jon" <[email protected]> wrote in
message
news:g52cee$346$[email protected]..
>I was going through a site I'm working on and adding
title attributes to my
> links when I found a strange bit of code that had been
placed in between
> my
> "<a" and my "href=" . . . does anyone have a clue as
to what this code
> doing
> and how it may have gotten there? When I originally
created the page, I
> just
> copied the content from an existing page and pasted it
into Design view,
> but
> the extra mystery code was not in the source file when I
went back and
> checked.
>
> <a set="yes" linkindex="15"
href="../folder/file.php">Anchor
> Text</a>
>

Similar Messages

  • "put hard disk(s) to sleep when possible" setting - YES or NO?

    I've searched.... but I can't find a definitive answer.
    Is it a bad idea to NOT "sleep" my hard disk(s)?
    (i.e. - uncheck the "hard disk(s) sleep" option)
    I have a new macbook and I'm running Time Machine on an external (powered) drive. I have my computer set to "put hard disk(s) to sleep when possible" but I'm having problems with "improper device removal" warnings when I wake up the macbook. I would hate to shorten the life of my drives - but potentially corrupted
    files on my Time Machine disk kind of defeats the purpose of back ups.
    I realize that "sleeping" conserves battery life - but when the macbook is plugged in, what should I do?
    thanks

    the external hard drive is unmounting itself and I receive the "improper removal" warning. I've seen similar posts in the Time Machine discussions. It seems that it might be a sleep related issue. Macbook wakes - but doesn't wake external?
    (Although one time it unmounted while the macbook wasn't sleeping)
    At first I thought it was because the drive was bus powered -so I switched to a powered drive. Problem still happened - so I removed the drive from my usb hub and plugged straight into macbook usb port... but the problem is still occuring.
    (Also.... wondering if verifying my back up drive will assure me that no data corruption occurred with improper removal...of should I do another complete backup?) thanks

  • Setting Aspect Ratio when cropping to A3

    Hey folks being new to Lightroom 5.6 I'm probably doing something stupid and I am sure there is an easy solution; I just don't know what it is..
    I have 23 RAW images in my LR Catalogue that I wish to crop, but I also know that I will be saving them as A3 JPGS at 300ppi.  So the first thing I did was go into the Print module and select my Canon Pixma Pro printer so that I can then select a paper size of A3.  In the print module, each image then displays A3 on the left hand side of the main preview window.  So good job, that bit is successful.
    So now I need to crop the images.  I had previously tried cropping them to A4 and therefore had typed 8.27x11.69 into the Custom Aspect Ratio setting (yes I know we're talking inches here.... LOL).  Well I then reset all the images so that their Aspect Ratio is set to "As Shot" and when I select done, the little crop box in the previews along the bottom of the screen disappears....  Still with me?  Oh I hope so
    So now the images are back to their original size as if they were straight off the camera, I selected all 23 images and pressed 'R' to enter the crop function.  Under the Aspect Ratio, I selected "Enter Custom" and tried entering both 297x420 (mm) and also 11.7x16.5 (inches).  On entering each of these ratios, whenever I select <OK>, the Ratio always reverts back to 8.27x11.69, as in A4, which was a custom ratio in the first place!!!!
    Any help on how I can set the Ratio correctly for A3 so that i can actually start doing some cropping would be greatly appreciated.
    Many thanks....
    Lewis

    Sean what a wombat!!!!   (Me that is, not you..... LOL)
    Of course, A3 is two sheets of A4,  That would explain why Lightroom kept showing 8.27x11.69.
    Many thanks for answering what is really common sense when one thinks about it.  Sorry to have wasted peoples time, but thanks once again.
    Lewis

  • Provisioning Allowed and Allow Auto-provisioning YES   Role exists No

    Hello,
    I am unable to select the roles while submitting the user provisioning request.
    The role additional details are set Yes for Provisioning Allowed and Allow Auto-provisioning
    But Role exists is showing No; i have tried updating the roles in many ways, everything is getting updated except this paricular field.
    Could you pls help me ...
    Regards,
    Sumanth

    Hello Sumanth,
    Can you successfully generate roles using the role generation option?
    I have the same issue but I presently have issues with generating single roles ONLY as posted on this thread - "Illegal tcodes" error during the role generation phase of ERM in AC10
    ...so I am thinking it is becuase I can't generate single roles that is why the roles are not displaying. However, I can view the roles in other environments like risk analysis but not at the point of access request provisioning. It tells me no roles are available.
    I sure hope someone will be able to help us out.
    Thanks

  • Rounded Rectangle Tool Corner Radius setting

    I'l like to see the Rounded Rectangle Corner Radius setting moved from General Preferences to either the RR Tool option bar, or double click on the RR Tool to access its Corner Radius setting.

    Yes. Change from the default % to px in the Properties panel. You can also enter an exact radius in the Autoshape Properties panel if you use the rounded rectangle auto shape instead of a regular rectangle.

  • Setting International settings

    Hey
    I work for a third party company and we have some software that is supported across several platforms including MAC. We have come across an issue in 10.5 with people having there prices in $ instead of in £. The software that we use is given a price but no currency is attached to it and we have several users in the UK stating they see $ symbol for prices on our software. However the software knows to pull the info from the local computer. I have had a look at 10.5 and under system preferences -> Format the details have been set accordingly to UK and GBP. Is there anywhere else on the MAC OS that sets this info? As I have had a look through it and I cannot seem to find any other place where this would be set.

    Yes thats what I was under the impression of as well as you should not need to set these details twice. I can only assume there is an issue with 10.5. If anyone else can find any other places to find change this it would be most appreciated as I am not an advanced MAC user.

  • Update a single column in query only form

    Forms 9i, database 10g
    I am migrating the form from 6i to 9i. I have a form that is query only except for one field that can be updated. The main block1, based on a view, includes most of the person's personal data, none of which is updateable.. Another block2, based on a table, includes the 3 not-null colums that cannot be updated, and a remarks field, which can be updated. The block2 properties are set YES for insert, update, delete. The three non-updatable columns have properties set to NO for I,U and D, but the remarks column has I,U and D properties set to YES. When I enter data into the remarks field and press the Save on the Forms icon bar, I get error FRM-40508:unable to insert record and the ORA-00001:unique constraint. I don't should not be able insert and I don't want to, I just want to update one column.
    What am I not setting correctly in 9i? The same triggers and code works in 6i.
    Any suggestions are greatly appreciated.
    Vija

    No, there are no on-update triggers, but there are Post-Qry. I did run it in debug mode, but there is no good place to put a break point, since retrieval of the data works fine. Should I have key-commit trigger on the block to do the update?
    Vija

  • 1-new slim imac, 1-new vista machine, 1-new airport extreme

    so I've been searching around the threads here and it seems like everyone's problems deal with like not seeing a wireless connection or not being able to print or not being able to file share and you would think that my situation was pretty common; if there is another thread about this please direct me and I apologize if I'm repeating a recent topic.
    ok, so i'm setting up a small little network for my aunt, she has a brand new 20" imac slim, two vista machines and one xp laptop. i advised her of getting an airport extreme to share internet. the imac sees and connects to the airpot fine but with vista it does not. vista can clearly see the basestation but won't let me connect to it. i've used a simple WEP key to connect to the base station and basically used defaults for my setting, yes, i am using an "Equivalent Key" for the vista machines but vista just keeps telling me it is unable to connect due to an unknown error.
    I've also tried to connect to the basestation with my little cousin's nintendo ds lites and it tells me that it "does not support this type of network security". i mean i just have WEP turned on, are there other settings on the basestation that i need to change? i'm new to the basestation i usually work with the airport express, the setting and stuff are different.
    any ideas?
    any and every post is much appreciated.

    i reset the basestation and and installed the airport utility on the vista machine and through the vista machine set up the basestation. i still can not connect to the basestation if any sort of encryption is turned on but if the basestation is open then the vista pc connects fine. since it looks like wireless encryption isn't an option; is there a way that i can just keep the connection open and just use a MAC filter?
    if they had cable internet it wouldn't be a bandwidth problem, but my aunt and uncle live in a somewhat rural area and they have to have satellite internet which means their download cap is around 17GB per month. if their neighbor knows and steals their bandwidth they'll hit 17GB in no time.
    the basestation has the latest firmware and both imac and vista machines have airport utility installed but i still don't understand why i can't turn on wireless security and still have the vista machine connect.
    i've tried using every encryption type possible and nothing will let the vista machine jump online; even the airport utility (on the vista machine) won't see the basestation when i turn on any sort wireless security.
    thanks cloth542000 for your reply, does anyone have any ideas on what i should do?

  • Network connection to HP P3015dn printer

    I have a problem with several layers to it.
    After MANY years of service my HP laserjet 2100 series printer started to have feed issues so I thought it was time to update.  Bought the P3015dn printer as a companion to the color laserjet.  Printer had issues with tray select, auto select and was irritating to get to work as needed but finally sucessful using the USB connection.  Now the big issue.  When I ran the set up software that comes with the printer and chose network installation the software found the printer right away, I acepted the setting and continuned.  Was able to configure the printer properly to print from the main office computer so installed the software on the computer in the shipping department.  So far so good.  Later I discovered my main computer was off line from the internet which has never happened before.  Did some trouble shooting and discovered the Gateway IP was missing from my network card configuration.  Re entered the IP address and immidiatly had internet back.  Thirty seconds later internet is gone again.  Checked the setting for the adapter in IPv4 and gateway is missing agin.  All the other settings are intact, just the gateway address is missing.  Repeated the process again and thirty seconds later address is missing again.  Repeat and repeat.  Not going to test the defanition of insanity.  Went and checked the computer in the shipping department and same problems.  I have a combination of (26) static IP nodes on my network, a mixture of wired and wireless and only these two computers were having an issue.  Since this was the next morning after adding the network installation for the printer I didn't connect the relationship right away.  Short version....finally narrowed the testing down to disconnecting the new HP printer and problem went away, adapter would hold it's gateway IP settings, reconnect printer and problem returns.  More research and discovered the printer looked to be configured using IPv6 setting.  My network is all all IPv4.  Dissabled IPv6 in the printer and programmed the printer for static IP IPv4  
    Problem now is, the printer will NOT print using IPv4 setting (yes....the setting are correct).  I can ping the printer just fine but when test pages are sent to the printer I have never had a page sucessfully print.  I reran the network installation and directed it to the static IP address, software saw the printer, installed just fine, shows the printer in devices, but can NOT print to it.
    Can anyone add insight as to WHY the printer doesn't print using IPv4?
    PS....when I was able to print, when the printer warms up just before printing is has a LOUD low pitch growling squeel and after printed makes a loud humming buzz for about 20 to 30 seconds.   ??? Normal ???

    DIYguy,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Regenerate Jar files on apps and DB tier at same time?

    The process of regenerating product jar files takes about 30 minutes on each tier (apps tier has forms and web server while DB tier has Database, concurrent manager). Can i regenerate on bot tiers simultaneously via adadmin?
    Thanks

    from node 1
    Generate Applications Files
    1. Generate message files
    2. Generate form files
    3. Generate report files
    4. Generate graphics files
    5. Generate product JAR files
    6. Return to Main Menu
    Enter your choice [6] : 1
    AD utilities can support a maximum of 999 workers. Your
    current database configuration supports a maximum of 117 workers.
    Oracle recommends that you use between 16 and 32 workers.
    Enter the number of workers [16] :
    Your current character set is "WE8ISO8859P1".
    Do you want to generate Oracle Message files
    using this character set [Yes] ?
    Enter list of products ('all' for all products) [all] :
    The current set of installed languages is: US
    Please select languages for generating Oracle Message files.
    You may select all of the above languages, or just a subset.
    Enter list of languages ('all' for all of the above) [all] :
    You selected the following languages: US
    Is this the correct set of languages [Yes] ?
    Setting up environment...
    Generating message files...
    Creating FND_INSTALL_PROCESSES table...
    The table FND_INSTALL_PROCESSES created by AD Administration already exists.
    If you are sure you do not want to keep the information from the failed
    AD Administration session,you may drop FND_INSTALL_PROCESSES table and
    continue with AD Administration.
    If you choose not to drop FND_INSTALL_PROCESSES table, AD Administration
    cannot continue successfully.
    Drop FND_INSTALL_PROCESSES table [No] ?
    from node 2:
    Generate Applications Files
    1. Generate message files
    2. Generate form files
    3. Generate report files
    4. Generate graphics files
    5. Generate product JAR files
    6. Return to Main Menu
    Enter your choice [6] : 1
    AD utilities can support a maximum of 999 workers. Your
    current database configuration supports a maximum of 117 workers.
    Oracle recommends that you use between 16 and 32 workers.
    Enter the number of workers [16] :
    Your current character set is "WE8ISO8859P1".
    Do you want to generate Oracle Message files
    using this character set [Yes] ?
    Enter list of products ('all' for all products) [all] :
    The current set of installed languages is: US
    Please select languages for generating Oracle Message files.
    You may select all of the above languages, or just a subset.
    Enter list of languages ('all' for all of the above) [all] :
    You selected the following languages: US
    Is this the correct set of languages [Yes] ?
    Setting up environment...
    Generating message files...
    Creating FND_INSTALL_PROCESSES table...
    The table FND_INSTALL_PROCESSES created by AD Administration already exists.
    If you are sure you do not want to keep the information from the failed
    AD Administration session,you may drop FND_INSTALL_PROCESSES table and
    continue with AD Administration.
    If you choose not to drop FND_INSTALL_PROCESSES table, AD Administration
    cannot continue successfully.
    Drop FND_INSTALL_PROCESSES table [No] ? yes
    Dropping FND_INSTALL_PROCESSES table...
    FND_INSTALL_PROCESSES table dropped.
    Dropping AD_DEFERRED_JOBS table...
    AD_DEFERRED_JOBS table dropped.
    Writing dependencies of jobs to run to appldep.txt file...
    There are now 59 jobs remaining (current phase=admin):
    0 running, 59 ready to run and 0 waiting.
    Reading completed jobs from restart file (if any).
    There are now 59 jobs remaining (current phase=admin):
    0 running, 59 ready to run and 0 waiting.
    Starting worker processes.
    Worker process 1 started.
    Worker process 2 started.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Worker process 3 started.
    Worker process 4 started.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Worker process 5 started.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Worker process 6 started.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Worker process 7 started.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Worker process 8 started.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Worker process 9 started.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Worker process 10 started.
    Worker process 11 started.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Worker process 12 started.
    Worker process 13 started.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Worker process 14 started.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Worker process 15 started.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Worker process 16 started.
    Checking if all jobs have their actual and symbolic arguments in sync....
    Done.
    Writing jobs to run to restart file.
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Reading jobs from FND_INSTALL_PROCESSES table ...
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sat Jan 08 2011 17:28:07
    APPL_TOP is set to /u15/tec2/appl
    Done reading jobs from FND_INSTALL_PROCESSES table ...
    Telling workers to read 'todo' restart file.
    Done.
    Starting phase 1000 (admin): Administration
    There are now 59 jobs remaining (current phase=admin):
    0 running, 59 ready to run and 0 waiting.

  • Oracle UCM folder level access on the fly

    Our requirement is like this. We have a folder named Projects.
    One user with Project Manager role will create a new folder within the Projects folder and give access to this new folder to one user from the Project Team Member role. No other member from the Project Team Member role will have access to that folder.
    Hence the access is not based on role or group but to an individual who will be selected on the fly.
    If someone can help me resolve the issue, that would be of immense help.
    Thanks,
    Deep.

    Well thanks again for your support. I saw you have given some detailed steps in another of my post. I have tried the ntk meanwhile in my own way and found something is working but not exactly what I want.
    Let me tell you this is for a demo that needs to shown to the client in a couple of days and I have jumped into this thing shortly to help out but I am not an expert of UCM.
    The requirement is like this -
    There is a virtual folder called Projects.
    The project manager will create another virtual folder under Projects and will give access it's access to only one of the project team members.
    There are two roles PROJECT_MANAGER and PROJECT_TEAM_MEMBER.
    If a user is either of these two roles s/he will see this folder. This works.
    I have installed the ntk component and set SpecialAuthGroups=restricted under the General Configuration.
    Added a new metadata DisclosureQuery.
    In the Content Security Configuration Information page of NTK Administration, under the Read Options section set Yes for both Use Security and Limit Access and in the script area wrote
    <$if isDisclosureQuery(xDocDisclosureQuery)$>
    <$isNTKReadAccess=1$>
    <$endif$>
    Say the user XXX has role PROJECT_MANAGER. He creates a folder say Project X under the folder Projects and mark the security group as Restricted. And in the DisclosureQuery filed wrote
    (UserName like 'ABC')
    Now say there are two users ABC and JKL with role PROJECT_TEAM_MEMBER. They both can see the Projects folder. The ABC can further see the folder Project X under Projects where JKL does not see any folder under Projects folder.
    But when ABC clicks on the Project X folder and tries to go inside it, the error message is thrown "Can not read folder".
    PROJECT_TEAM_MEMBER has RW access on Restricted security group.
    I even tried to put PROJECT_TEAM_MEMBER in the Query Role and Update Role select boxes in the Hit List Roles Configuration Information page. Not sure if I really need this.
    This link helped me a lot - http://selvam2day.blogspot.com/2010/10/sample-step-by-step-implementation.html
    But I am not able to resolve the last part.
    You can help that will be much appreciated.

  • H.264 Web based Encoder Demo

    Hi,
    before some weeks ago i red a newsletter that adobe has include a h.264 encoder in FP 11.
    Well, here we go i thought and start to develope a web based h.264 encoder for our CDN. Here is a first version that i want to share with you developers.
    Onlinelib Web Encoder Version 0.2:
    http://onlinelib.de/labs.html
    Please do not use this in serious projects. You will need also a RTMP Server for testing and of course a web-player. I will include a player option inside the encoder for internal testing.
    There are a lot of features missing, but the basic h.264 encoding is working on my Mac Pro and our CDN.
    What i found out during the development:
    Please correct me if i post something wrong.
    Contra:
    - AAC Encoding for Audio is missing. Without AAC we cant product ipad / iphone compatbile streams. Flash iOS cross-compiler supports CPU native speex decoding, same for nellymoser, but you cant mix them cause native h.264 decoding in iOS is also not working and you cant send the iOS native quicktime player a bytearray for decoding h.264.We can have access to the raw micro data, but its useless cause you cant transmux the packets to the camera stream. I think a native AAC encoder in AS3 or alchemy is possible but without more access to the encoder its useless.
    - No Stereo Encoding. That is really a big minus point. I study all docs and cant find if its possible to encode 2 channels.
    - No access to compressed frames for video or audio. Without getting access to the compressed frames we cant use HTTP streaming, packing for the new HTTP protocol that is accessable sinse FP 10.1. In times of hacks and security its important that we developer can protect our streams with own encryption technologies. Not possible right now. RTMP(e) is a option, but this encryption is really useless (my 2 cent mind). A DES is stronger than the hole RTMP(e).We also are not able to calculate our own bandwidth alogs.
    - I thought that adobe will include VP8 Encoder / Decoder in FP11. I hope they will do this.
    Pro:
    - I think the encoder is based on MainConcept SDK, works for me. Baseline and Main is fast enought toDo realtime. I cant find a way to set motionVectors, bframes that can be used in mainprofile. I saw that in some level(s) profile h2.64 the encoder makes some strange colorspace effects (false colors).
    -We can change cameras, micro, bitrate, fps during a streaming-sessions. That´s cool and not possbile with Flash Media Desktop (FME) Encoder. You have to disconnect the FME first, then set the changes re-connect again.
    - p2p is also working and you can mix server and p2p. We port the rtmfp protocol to an embedded device:
    http://walyou.com/img/world-smallest-pc-space-cube-4.jpg
    The p2p option in the public encoder is not useable cause adobe has patent-rights on the rtmfp protocol. If i have time i will inlcude a cirrus service.
    Best,
    Gary
    http://onlinelib.de

    Thanks for the input. What do you mean by encoding it as H.264 not mp4 - which setting affects that?
    Maybe I already has it?
    here is what I have now:
    Video compression setting
    Compression type: H.264
    Frame rate: current fps
    Key frames: every 24 frames
    Frame Reordering: Yes
    Compressor quality: High
    Encoding: Best Quality (Multi-pass)
    Data rate: Restrict to 800 kbits/sec
    Optimized for: Download
    Sound
    Format: AAC
    Channels: mono
    Rate: 44.1 kHz
    Show advanced setting: yes
    Render setting:
    - quality: normal
    MPEG 4 AAC LC Encoder Settings:
    - Encoding stratey: Average bit rate
    - Target bit rate: 96 kbps
    Inspector panel
    File format: Quicktime Movie
    Extension: mp4
    Allow job segmenting: yes
    Video setting: Enabled
    Audio setting: enabled
    Streaming: none

  • Firefox 4 app can't be installed on my Motorola Backflip. It has Android 2.1 installed and an ARMv11 processor (which I can only assume is better than an ARMv7 which is required. Any way to install the app?

    Android 2.1 firmware version
    ARCv11 processor
    >17 mb space free
    I've looked in the app store, tried the online app store, tried the image code, and even tried installing to the SD card.
    If anyone has successfully installed, please respond. If not, is there any clue when it will be supported? (I don't understand why Mozilla would go through all the trouble of making an app that is exclusive to certain phones)

    Sorry, ARM11 processors use the ARMv6 instruction set (yes, this is weird and confusing), and Firefox 4 is not available for phones with these processors. For details, see https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements

  • How do I change the settings to automatically open a file?

    I accidentally changed the settings so everytime I open an Excel spreadsheet, it saves automatically to my desktop. These are shared, so this is not beneficial. All I need is to open the file. Please let me know if there is a way to change this, as the only options are saving and prompting each time to save.

    I think this uses the default PDF Maker setting, yes. What you should try
    is to open Word and then go to the Acrobat tab in the ribbon. Then click on
    Preferences and under the Settings tab un-tick the "View Adobe PDF result"
    check-box.

  • How to make alternate GL account mandatory based on enable checkbox?

    Hi,
    I need to do a personalization on gl code combination form such that it makes alternate gl code combination field mandatory for a gl code combination which is disabled by user. So it must not allow to disable any gl code combination without entering alternate gl code combination.
    trigger event : WHEN-VALIDATE-RECORD
    trigger object : COMBO
    condition : :COMBO.ENABLED_FLAG = 'N' AND :COMBO.ALTERNATE_ACCOUNT_FLEXFIELD IS NULL
    Actions
    1) property -> item -> COMBO.ALTERNATE_ACCOUNT_FLEXFIELD -> REQUIRED -> true
    2) message -> error -> Alternate account must be compulsory when disabling any account.
    I've tried above form personalization but it is not working. also tried custom.pll but this even does not work on this form. Can anybody suggest how I can achieve this requirement without doing any customization?
    Thanks in advance.....
    SANJAY
    Edited by: sanjaypanchal on 25-May-2012 04:04
    Edited by: sanjaypanchal on May 25, 2012 4:41 PM
    Edited by: sanjaypanchal on May 25, 2012 4:42 PM

    Okay, looks like you are doing Internet Expenses, correct? Look at the profile options for each employee in Oracle System Administration. Profile option "PA: Allows Project Time and Expense Entry" would be set = "Yes" to allow project expense entry. I assume that is done, since you can see the fields to enter project information. Next, look at profile option "OIE: Enable Projects". That profile option should be set = "Required", for what you are wanting to do. I am thinking maybe that is set to "Yes". So I would look at those profile options first. You may be making this harder work than it needs to be. Make sense?
    John Dickey

Maybe you are looking for

  • End  user deleted posted MIRO invoice, how?

    Hi SAP Gurus, Surprisingly user was able to delete the posted MIRO invoice (infact a paid invoice) using MIR4, then going to Edit- Display/Change and Invoice document-Delete. I can see the deleted invoice under Purchasing history in the PO but when i

  • Emailed photos missing color profiles

    I noticed that all the photos I've sent people from the iPhone look really flat and lifeless. When I transfer the photos to iPhoto they have the profile sRGB. But if I email them from the Photos app on the phone (at any size) they are missing their I

  • Safari application missing

    My darling son went to visit some not so proper sites and now the safari application is missing. There is a question mark on the icon and when I ttry to find safari.app it says no records found. Is this the only way we can get online? Can anyone help

  • Recently, almost every time I try to open a new website, A weird website( ads?) pops up as a new window. and i have to close it. how to fix it?

    this is one website that would pop up...... https://www.updatevideos.com/s/updatescreen/?ClickID=6GIBAMNLQwBLHEUBAAAAADzeUwAAAAAAAAAAAAAAAAAAAAoAAQAHC8zNagAAAAAApjhrAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAD3ARgAAAAAAAIBA

  • Inspection Lot Qty Vs Actual Lot Qty

    Hi All; I am posting multiple GR's against a Process Order for Eg 1st GR 100 Qty, 2nd GR 200, 3rd GR 300 and after doing this in the Inspection Lot the Inspection Lot Qty shows as 100 and the Actual lot Qty of 600 (sum of GR's) hence the Inspection l