Setting GUI Status on CL_SALV_TABLE

Hi All,
I'm calling CL_SALV_TABLE in a method in the popup mode:
*    Set popup display
lo_alv->set_screen_popup( start_column = 10
                                  end_column   = 200
                                  start_line   = 5
                                  end_line     = 30 ).
My problem is that I can't link a GUI status to this as the status can only be linked to a program, function module etc.
I have added a new GUI status to a FM in the same package but I'm getting an object not found exception.
lo_alv->set_screen_status( pfstatus = 'CTRL_POPUP'
                                report = sy-repid
                                set_functions = lo_alv->c_functions_all ).
Anybody know a workaround for this besides moving the ALV into a program and calling that from the object. I'd prefer to keep all my code in this one object if I can help it.
Cheers,
Gregor

You can refer to any GUI status for which is created in any other program.
For, example:
lo_alv->set_screen_status( pfstatus = 'SALV_STANDARD'
report = 'SALV_DEMO_TABLE_FUNCTIONS'
set_functions = lo_alv->c_functions_all ).
So, you can use any dummy program which can hold the GUI status for you.
Regards,
Naimesh Patel

Similar Messages

GUI status for report

Hi,
I had created GUI status for output list in one report. its status is active in program but in report output this created status is not activated (Menu bar, application toolbar). Has anybody face this kind of problem before?
Regards,
Dilip

hi,
use command
SET GUI-STATUS 'menu1' -> double click on menu1 ->select menu bar radio button from available radio buttons -> click on expand butt0n -> select required buttons n give function codes n select user-command optionfor those buttons ->activate -> back ->activate the report prgm.
i think in our case you didn't activated the menu painter screen. check it once n dont forget to assign f.code n to give user-command after giving static text for buttons that u will use in prgm.
if helpful reward some points.
with regards,
suresh babu aluri.

GUI STATUS IN ALV USING OOPS

How can we set GUI STATUS in a alv program using oops...Is there any method we need to use for this ????

Hi,
Just call screen from your program as below .
call screen 9001.
In the PBO of the screen,write the following code
MODULE status_9001 OUTPUT.
SET PF-STATUS 'ZSTATUS'.
SET TITLEBAR 'ZTITLE'.
ENDMODULE. " STATUS_9001 OUTPUT

How to set my own gui status when i use selection-screen

how to set my own gui status when i use selection-screen command
and
how to set the names in the application tool bar when function keys are created

Make sure that you do this in event "AT SELECTION-SCREEN OUTPUT".
Run Txn ABAPDOCU and check 'DEMO_SEL_SCREEN_STATUS' for sample.
Also check out following discussion -
Selection Screen PF-STATUS
Cheers,
Sanjeev

Default setting of SAP GUI Status bar

Hello all,
Is there a way to set a default value of the precious combobox from the GUI status bar (the one showing System, Client, User, Program.....).
I would like to set it to always display the SAP System.
thanks.

Hi,
you can do this like below.
First select the option to show 'System' ( may be it is by default prompting to show 'Program Name' )
next time when you login it will default with System name only.
Kind Regards,
Ravi Sankar.Z

Setting the GUI Status - URGENT

Hi Experts,
Is there any way for setting the GUI Status other than se41.
What's the difference between Status and Status list?
Can anyone help me out of this?
Thanks and Regards,
Swamy Kunche

Hi Swamy Kunche ,
GUI Status :
A GUI status is a subset of the interface elements used for a certain screen.The status comprises
those elements that are currently needed by the transaction .The GUI status for a transaction may be composed of the following elements:
-Title bar.
-Mneu bar.
-Application tool bar
-Push buttons.
GUI List:
GUI List Displays a list of all GUI statuses for the current program
Thanks,
Greetson

Help needed on ALV variant with new GUI screen is created by set PF status

Hi Gurus,
I have created a new GUI screen for ALV grid display thru set pf-status, since i need two buttons on application toolbar.
have been passing parameters to alv_grid_display FM for display-*
i_save            = 'A'
is_variant        = gwa_variant
I have an ALV variant selection paramter on selection screen.
Please guide me with some pointers on how to implement ALV variant selection thru selection screen.
Many Thanks,
Madan

Hi,
Search default variant for the report
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            i_save     = 'A'
       CHANGING
            cs_variant = i_variant1
       EXCEPTIONS
            not_found = 2.
If default variant is found , use it as default.
Else , use the variant LAYOUT1.
IF sy-subrc = 0.
    p_var = i_variant1-variant.
ELSE.
    p_var = 'LAYOUT1'.
ENDIF.
endform.                    " SUB_VARIANT_INIT
*&      Form SUB_CHECK_PVAR
Once the user has entered variant, check about its existence
FORM SUB_CHECK_PVAR.
If the name of the variable is not blank, check about its existence
if not p_var is initial.
clear i_variant.
i_variant-report = sy-repid.
i_variant-variant = p_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
         EXPORTING
              I_SAVE     = 'A'
         CHANGING
              CS_VARIANT = I_VARIANT.
If no such variant found , flash error message
     if sy-subrc ne 0 .
      message e398(00) with 'No such variant exists'.
     else.
If variant exists , use the variant name to populate structure
I_VARIANT1 which will be used for export parameter : IS_VARIANT
in the function module : REUSE_ALV_GRID_DISPLAY
       clear i_variant1.
       move p_var to i_variant1-variant.
       move sy-repid to i_variant1-report.
     endif.
else.
   clear i_variant.
endif.
ENDFORM.                    " SUB_CHECK_PVAR
*&      Form SUB_VARIANT_F4
Display a list of various variants of the report when the
user presses F4 key in the variant field
form SUB_VARIANT_F4.
i_variant-report = sy-repid.
Utilising the name of the report , this function module will
search for a list of variants and will fetch the selected one into
the parameter field for variants
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
       EXPORTING
            IS_VARIANT         = I_VARIANT
            I_SAVE             = 'A'
            I_DISPLAY_VIA_GRID = 'X'
       IMPORTING
            ES_VARIANT         = I_VARIANT1
       EXCEPTIONS
            NOT_FOUND          = 1
            PROGRAM_ERROR      = 2
            OTHERS             = 3.
IF SY-SUBRC = 0.
    P_VAR = I_VARIANT1-VARIANT.
ENDIF.
endform.                    " SUB_VARIANT_F4
Thanks
Ashu

How to get GUI Status(Push Buttons) in ALV Report

Hi Friends
I have a requirement in a way that:
Once selection-screen was processed,an ALV report has to come and above the ALV List,I need a custom GUI Status(4 Push Button) with Push Buttons Logic.
Once I had clicks on thesse push button,I need to display one more ALV List and above this List,again I need a custom GUI Status(2 Push Buttons) with Push Buttons Logic.
Can anyone throw some light how we can achieve this.
Thanks for your cooperation!
Regards,
Madisetty

data: rt_extab type slis_t_extab,
        g_ucomm like sy-ucomm ,
        g_selfield type slis_selfield.
form alv_display .
call function 'REUSE_ALV_LIST_DISPLAY'
     exporting
     i_callback_program             = g_repid
     i_callback_pf_status_set       = 'PF_STATUS'
     i_callback_user_command        = 'USER_COMM'
       it_fieldcat                    = it_fldcat
      tables
        t_outtab                       = it_final1
perform pf_status using rt_extab.
perform user_comm using g_ucomm g_selfield .
endform.
form pf_status using    p_rt_extab.
set pf-status 'PF_STATUS' excluding p_rt_extab.
endform.
form user_comm using    p_ucomm like sy-ucomm
                         p_selfield type slis_selfield.
data: l_row type i.
case p_ucomm.
    when 'DISPLAY_PO'.
      loop at it_final1 into wa_final1.
        if wa_final1-sel eq 'X' .
          l_row = l_row + 1.
        endif.
        if l_row gt 1.
          message e004.
        endif.
        clear wa_final1.
      endloop.
      p_selfield-fieldname = 'SEL'.
      read table it_final1 into wa_final1 index p_selfield-tabindex .
      set parameter id 'BES' field wa_final1-ebeln.
      call transaction 'ME23N'.
endcase.
endform.
*create user interface for gui status by double clicking on 'PF_STATUS'.
*Check the above sample code .

Set pf status in alv oops concept

Hi all,
can any one pls tell me by using which method or class i can set the
pf status......?
regards
cnu

Fast and Easy way
As you are using OO ALV, remove any function not needed from the ALV via parameter IT_TOOLBAR_EXCLUDING of method set_table_for_first_display and put your own function in the menu of your dynpro PBO via SET PF-STATUS.
Nethertheless you can use a more complew way using :
<b>Changing Standard Functions</b>
Purpose
The standard functions are not designed for specific applications. As a result, special knowledge of the data displayed cannot be considered. In individual cases, you may design a standard function - such as sorting by a specific column - more effectively in a specific application.
Process Flow
1. Define an event handler method for event before_user_command [Page 108]. This event is triggered after the user has selected a function. This means that the ALV Grid Control passes control to the application before the function is executed. Using event parameter I_UCOMM you can restrict the function code to the function you want to modify.
2. Implement your own algorithm for the function within the event handler method. In this context, you can call methods of the ALV Grid Control.
3. Reset the function code to ensure that the standard function is no longer executed:
CALL METHOD <Instance of the ALV Ccntrol>->set_user_command exporting I_UCOMM = SPACE.
If you never need specific functions of the tool bar, you can hide them for the entire life-cycle of the control. To do this, you use parameter IT_TOOLBAR_EXCLUDING of method set_table_for_first_display to pass a table that contains the function codes to be hidden.
<b>Defining GUI Elements in the Toolbar</b>
Process Flow
1. Define an event handler method for event TOOLBAR.
2. Declare a structure for defining a toolbar element:
data: ls_toolbar TYPE stb_button.
3. For a pushbutton, for example, you would fill the following fields:
CLEAR ls_toolbar. MOVE 0 TO ls_toolbar-butn_type.
MOVE 'BOOKINGS' TO ls_toolbar-function.
MOVE icon_employee TO ls_toolbar-icon.
MOVE 'Show Bookings'(111) TO ls_toolbar-quickinfo. MOVE SPACE TO ls_toolbar-disabled.
In the butn_type field, you specify the type of the GUI element for the ALV Grid Control. For possible values, see the value range of domain TB_BTYPE.
4. Use event parameter E_OBJECT to append the new definition to table mt_toolbar:
APPEND ls_toolbar TO e_object->mt_toolbar.
5. If you want to define additional elements, go back to step 3.
6. Call method set_toolbar_interactive, if you want to rebuild the toolbar.
Result
In the event handler method of event USER_COMMAND, you can query the function code you specified in field function to implement the associated function.
See also report BCALV_GRID_05 in development class SLIS.
Look at this documentation too : <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf">ALV Gird Control (BC-SRV-ALV)</a>
Regards

Add Button to GUI STATUS Application toolbar

Hi,
I have to add a button in the application toolbar of a gui status. I have done that many times before, but I never got into trouble like this time....
When I open the Gui status and the tree for the application toolbar, I can see already set buttons. When I now click on change (a modification warning comes) and press the plus-icon, it is possible to enter a new item. But everything I´m typing, I get the message Function code XXXX has not been assigned to a function key. I have never got this before....
When I now go to SE41 and enter a new function key, I can´t use it either afterwards as a button in the application toolbar.
In the tree of the function keys, I can´t change anything...
What can I do here? The program name is SAPMZLCG, so it has been modified sometimes. But how can I change the GUI STATUS now to add a new button?
Thank you!

You need to goto the application toolbar and the add your text to the items and click below the text you will get one popup which will ask for static text and dynamic text. select statictext and then add all the information like text name and if you want to add an icon you can do it aswell. the there will be another popup for fuction attributes where you will be able to find some options loke fuction types and reaction need to select all that and then click on the ok button and save check and activate the same and after that activate and check whether the button is visible or not. once the button is visible then you need to check for the ok_code and sy_ucomm and then insert the fuctionality of the button.
I hope this might solve your problem.

Gui status (AT USER-COMMAND) trigger at first

Hello all,
I wrote a basic list shown below.
In it , AT USER-COMMAND and AT LINE-SELECTION events are used all.
when i double click on line in the list, I think the at line-selection should be trigger at first. but in fact ,the AT USER-COMMAND trigger.
and the sy-ucomm get the first button value in the GUI-STATUS BAR(There's only one button on it).
how can i solve it .
any answers should be appreciated.
START-OF-SELECTION.
SET PF-STATUS 'ZSATMM24F1'.
write : \ 'aaaaaaaaaaaa'
write : \ 'aaaaaaaaaaaa'
write : \ 'aaaaaaaaaaaa'
write : \ 'aaaaaaaaaaaa'
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'TO_a'.
PERFORM to_a.
ENDCASE.
AT LINE-SELECTION.
write : 'test'.
best regards,
daniel.

Please make sure to add the fcode PICK to the F2 function code in your gui status and try again.
Regards,
Rich Heilman

Any ideas for GUI status manipulation?

Hi All,
I have a requirement with me, which I'm not able to figure out how to achieve. Here goes:
There's a transaction in ERP system (CO11N) which was originally not designed (it seems) to be used with CALL TRANSACTION kind of way. But now a requirement is to call it that way... I guess I can do that anyway by passing the SET PARAMETER for the key input fields...
But there's also another requirement that when calling the transaction this way, make sure two of the application toolbar buttons should be disabled. And they should be enabled when the transaction is called directly from the command bar (as /nCO11N).
I don't have any set/get parameters to check for and disable/enable the GUI status Fcodes with it...
Can someone please give me some pointers as to how this can be achieved?
Thanks in advance!
Mithun.

Hello Jonathan,
Thanks a lot for the quick tip.
I thought of this technique as well... But then figured that using this 'export to memory' technique is not a very recommended way...
Thus I want to keep this way as a last resort for the time being... But would like to know if there is any better way to achieve the same effect without using the shared memory sort of technique.

Upload / download gui-status/dynpro when function group

Hi All,
I'm coding a program where I can download and upload reports and module pools but I tried to do the same with function groups and I found It is different to upload dynpro and gui staus when the objet to generate is a function group.
Could anyone help me a little in order to complete and finish this issue?
Below is shown the routines I coding in order to achive that:
For gui-status uploading I use:
CALL FUNCTION 'RS_CUA_INTERNAL_WRITE'
    EXPORTING
      program   = prog
      language = sy-langu
      tr_key    = tr_key
      adm       = adm4
    TABLES
      sta       = sta4
      fun       = fun4
      men       = men4
      mtx       = mtx4
      act       = act4
      but       = but4
      pfk       = pfk4
      set       = set4
      doc       = doc4
      tit       = tit4
      biv       = biv46c
    EXCEPTIONS
      not_found = 1
      OTHERS    = 2.
For screen uploading I use:
GENERATE DYNPRO gs_d020s gt_d021s gt_d022s gt_d023s ID dynp_id
                      MESSAGE mess LINE line   WORD    word.
    IF sy-subrc = 0.
      EXPORT DYNPRO gs_d020s gt_d021s gt_d022s gt_d023s ID dynp_id.
    ENDIF.
But both options don't work when uploading function groups
Regards...
Edited by: Rob Burbank on Jun 1, 2011 11:58 AM
Edited by: Kenneth Castañeda on Jun 2, 2011 7:31 PM
Edited by: Kenneth Castañeda on Jun 2, 2011 7:34 PM

Hi Kenneth,
sorry, it is really not obvious that [there is a link behind zsaplink|http://code.google.com/p/saplink/].
From the link:
"SAPlink is an open source project that aims to make it easier to share ABAP developments between programmers. It provides the ability to easily distribute and package custom objects."
This software allows you to up- and download all kinds of SAP objects. It is distributed under the GNU General Public License.
I think this is exactly what you are looking for - or I did not understand your question.
Regards,
Clemens

GUI status items are not displayed

Hi all,
Some parts of gui status are not displayed but some of them are displayed.
What is the problem?
Thanks.
deniz.

Hi snehi chouhan,
I have created a program and two gui statuses for this.
One of them is set at first display of report but not all items.
Thanks.

How to add a gui status in selection screen

hi
experts can u help me plzzzzzzzzzzzzzzzzzzzzzz
for this

Hi Ravi,
Refer
how to add a gui status in a selection screen?
gui status in selection screen
gui status in selection screen
how to set my own gui status when i use selection-screen
Reward if it helps
Regards,
Santosh

Setting GUI Status on CL_SALV_TABLE

Similar Messages

Maybe you are looking for