Setting "javaplugin.maxHeapSize" at System level deployment

Hi all,
I'm trying to change the default value for the "javaplugin.maxHeapSize" parameter. By default it is always 96m, but I need to configure it to 256m.:
....java.vm.version = 1.5.0_06-b05
javaplugin.maxHeapSize = 96m
javaplugin.nodotversion = 150_06
javaplugin.proxy.config.type = auto
javaplugin.version = 1.5.0_06....
At user level configuration it runs ok, but at System level configuation it doesn't.
I tried the following changes in the deployment.properties (located by the deployment.config file) :
deployment.javapi.jre.1.5.0.args=-Xmx256m -Djavaplugin.maxHeapSize\=256m
javaplugin.maxHeapSize=256m
but these changes don't work.
Can you help me?
Thanks.
Regards.

G'day,
Did you ever find a solution to this problem?
I'm in a similar boat...
http://forum.java.sun.com/thread.jspa?threadID=5185445
Thanks,
Chris.

Similar Messages

System Level deployment.properties on https Server

We want to use the system level deployment.properties (
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html#location )
which is placed on our https server.
For Java Webstart applications this works perfect.
But applets wont start.
Applet console output when deployment.properties is placed on https server:
Java Plug-in 1.5.0_06
Using JRE version 1.5.0_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\xxxFinalizer, called close()
Finalizer, called closeInternal(true)
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading proxy configuration from Internet Explorer ...
network:     Auto config URL: http://proxy.xxx.com/pac/proxy.pac
network: Done.
network: Loading auto proxy configuration ...
network: Downloading auto proxy file from http://proxy.xxx.com/pac/proxy.pac
network: Done.
network: Proxy Configuration: Automatic Proxy Configuration
     URL: http://proxy.xxx.com/pac/proxy.pac
basic: Registered modality listener
liveconnect: Invoking JS method: document
liveconnect: Invoking JS method: URL
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@1efb836, refcount=1
Exception in thread "Thread-2" java.lang.ClassCastException: sun.net.ProgressMonitor
     at sun.plugin.util.GrayBoxPainter.beginPainting(Unknown Source)
     at sun.plugin.AppletViewer.initApplet(Unknown Source)
     at sun.plugin.AppletViewer.appletInit(Unknown Source)
     at sun.plugin.viewer.LifeCycleManager.initAppletPanel(Unknown Source)
     at sun.plugin.viewer.IExplorerPluginObject$Initer.run(Unknown Source)
Applet console output when deployment.properties is placed on http server:
Java Plug-in 1.5.0_06
Using JRE version 1.5.0_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\xxx
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading proxy configuration from Internet Explorer ...
network:     Auto config URL: http://proxy.xxx.com/pac/proxy.pac
network: Done.
network: Loading auto proxy configuration ...
network: Downloading auto proxy file from http://proxy.xxx.com/pac/proxy.pac
network: Done.
network: Proxy Configuration: Automatic Proxy Configuration
     URL: http://proxy.xxx.com/pac/proxy.pac
basic: Cache is enabled
basic: Location: C:\Documents and Settings\xxx\Application Data\Sun\Java\Deployment\cache\javapi\v1.0
basic: Maximum size: unlimited
basic: Compression level: 0
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
basic: Registered modality listener
liveconnect: Invoking JS method: document
liveconnect: Invoking JS method: URL
trustStore is: C:\PROGRA~1\Java\JRE15~1.0_0\lib\security\jssecacerts
trustStore type is : jks
trustStore provider is :
init truststore
adding as trusted cert:
X509KeyManager passed to SSLContext.init(): need an X509ExtendedKeyManager for SSLEngine use
trigger seeding of SecureRandom
done seeding SecureRandom
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@fc9944, refcount=1
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@1256ea2
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
# and so on ...I guess that the trusted jssecerts is not regarded until the system level deployment.properties has been downloaded.
Whereas the deployment.properties can not be downloaded from my https server when the trusted certs are not known at this time.
Or any other presumptions?
Maybe it helped you ;-)

I did something very similar. I am using jre 1.5.0_01.
And it seems to work!
The deployment.config is:
deployment.system.config=file:/c:/jws/deployment.properties
deployment.system.config.mandatory=true
and the deployment.properties is (at the location above):
deployment.system.cachedir=cache
To load the cache I start javaws as follows:
javaws -import -system -codebase file:/c:/cd file:/c:/cd/notepad.jnlp
This results in creating the cache in
file:/c:/jws//cache
To start the app I did:
javaws -system http://java.sun.com/products/javawebstart/apps/notepad.jnlp
The -system seems to be neccessary but I am not quite sure. If it is omitted
the app also starts, but javaws stores just the jnlp in the default user cache!

Can anyone tell me how to do a system level deployment using JNLP ?

Hi All,
Can anyone tell me how to do a system level deployment using JNLP ?
Any example or link will be very useful.
Thanks in advance..

Thanks for the link. I can now able do configure on system level.
Uniform for all users.
However, I have three different environment running ( e.g : production, uat and dev )
And I want to deploy all of them on system or enterprise configuration.
I create the file "deployment.config" on jre/lib directory and put the entry as below :
deployment.system.config=file:/E:/Deployment/XXXX/production/deployment.properties
deployment.system.config.mandatory=trueNow, when I run other environment it will look on the production deployment. I have different
version of jars for production , uat and dev.
How can I archive that ? I want different universal "cache" of jars for all the three different environment.
e.g ( production - in one loaction for all the users , C:\Documents and Settings\All Users\Application Data\prod\cache
uat - in one loaction for all the users , C:\Documents and Settings\All Users\Application Data\uat\cache
dev - in one loaction for all the users, C:\Documents and Settings\All Users\Application Data\dev\cache )
Is that possible ??
Thanks in advance,

Setting javaplugin.maxHeapSize -Xmx at system level

G'day,
A similar unanswered question has been asked elsewhere
http://forum.java.sun.com/thread.jspa?forumID=30&threadID=5115738
I would really like to know whether it is possible to set the default value of javaplugin.maxHeapSize at the System Level (I know how to do it on a per user basis).
In particular, I am interested in doing this on Windows Vista, where I've read the limit can be as low as 64M (!)
http://forum.java.sun.com/thread.jspa?forumID=30&threadID=5168556
I understand that it might not be possible - the heap-size limit is set by the application, e.g. IE7, into which the Plug-In is being embedded. Even so, it can be overridden at the user-level, so why not at the system level?
Thanks,
Chris.

G'day,
Did you ever find a solution to this problem?
I'm in a similar boat...
http://forum.java.sun.com/thread.jspa?threadID=5185445
Thanks,
Chris.

Setting system level deployment.user.cachedir in deployment.config

G'day,
I've been experimenting with JRE 1.5.0_04 on Windows XP.
By default deployment.user.cachedir is set to <user home>\Application Data\Sun\Java\Deployment\cache. However, I want it to be <user home>\Local Settings\Application Data\Sun\Java\Deployment\cache.
I have managed this as follows.
C:\Windows\Sun\Java\Deployment\deployment.config contains:
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.propertiesand C:\Windows\Sun\Java\Deployment\deployment.properties contains:
deployment.user.cachedir=$USER_HOME\\..\\..\\..\\..\\Local Settings\\Application Data\\Sun\\Java\\Deployment\\cacheThis works but is ugly. The problem is that $USER_HOME=<user home>\Application Data\Sun\Java\Deployment. It seems that $USER_HOME and $JRE_HOME are the only two variables for use in deployment properties. Are there any others, in particular, one that mirrors the user's actual home directory?
Thanks,
Chris.

G'day,
Open the Java Console and execute "dump system and
deployment properties" which shows property values,
and see if what you want is there.Thanks, but I don't think I can use these at the system level, can I?
I did try using ${user.home} but that doesn't work.
So, are there any variables other than $USER_HOME and $JRE_HOME that can be used when setting system level properties?
More info, http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html
Thanks,
Chris.

Deployment '2700002' to target 'tar152' encountered a system level deployment error during data transfer.

Hi All,
I got this error in atg bcc on UI and console as well when i doing full deployment.
I triyed through snap-shot id but i think this is different issue.
So please tell me where is problem happend.
Thanks in Advance.
--Kakasaheb.

Are you working with a customer with a support contract?
Cause
One potential cause is corrupted data in the epub_file_folder table in the versioned schema and examining the table contents is necessary. This data may be the result of a deployment containing VFS assets that did not complete successfully
The BCC application assumes that the virtual folder structure contained in epub_file_folder is built upon a single root folder. This folder has the name 'root' and has a NULL parent_folder. If another folder in this table has a NULL parent_folder, then the application does not know which is the true root folder. As a result, based purely on chance, the BCC will choose one of them as the root folder of the VersionFileStore (VFS). Depending on which assets are contained beneath that folder, some file assets may not appear correctly in the BCC UI. Another symptom is the inability to deploy any project, including a full deployment.
To check for this particular corruption, perform the following SQL query.
select * from epub_file_folder order by parent_folder;
Putting the table data in a spreadsheet makes it easier to sort the data on various columns for analysis.
If you sort by parent_folder check for data similar to that shown in the following table. Note that there are two folders whose parent_folder is NULL. Here are the relevant columns from epub_file_folder:
folder_id
folder_name
parent_folder
asset_version
is_head
version_deleted
version_editable
ff102063
CorruptFolder
NULL
1
1
0
0
root
root
NULL
1
1
0
0
Solution
Note: Exercise caution when directly modifying the versioned database schema. For assistance identifying this problem and implementing the solution, please open an SR with Oracle Support.
1. Analyze Versioned Folder Data
How you resolve this corruption will depend on whether or not you need to retain the corrupt folder. Examine whether the folder has an asset version that is checked in, marked as deleted, or marked as the head version. If there is no checked-in version with is_head=true, then this indicates the folder may have been part of a failed deployment.
Trace through the hierarchy of folders underneath the corrupt folder. Determine whether there are any folders or files within that hierarchy that you need to retain. In some cases, it may be a single folder created unintentionally by a BCC user. In other cases, there may be more significant folder structure underneath it that is needed by the front-end application.
2a. Corrupt Folder Not Needed
If you do not need the corrupt folder, set its version_deleted=1.
This will mark the folder as Deleted in the versioned repository. As far as the BCC is concerned, neither it nor anything under it will exist and will not appear in the BCC UI. The data will still be retained in the database, though.
2b. Corrupt Folder Needs Correct Parent
If you do need the corrupt folder, determine the true parent folder. Set its parent_folder to the ID of the actual parent.
See the folder_id column for the correct parent folder and substitute that ID for NULL in BadFolder's parent_folder.
3. Restart BCC and Re-Test
After modifying the data for the corrupt folder, restart the BCC so that the repository picks up all the changes.
++++
Thanks
Gareth
Please mark any update as "Correct Answer" or "Helpful Answer" if that update helps/answers your question, so that others can identify the Correct/helpful update between many updates.

Deployment '18600003' to target 'Production' encountered a system level dep

Hi Experts,
Please help me in resolving the error while i am doing full deployment from BCC to staging / production server instances , i am getting below error.
It would be great if u help me resolving this error.
<Dec 5, 2012 1:48:26 AM PST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
**** Warning Wed Dec 05 01:52:33 PST 2012 1354701153339 /atg/epub/PublishingRepository Using default JDBC type for: project:tar1557 could not find this column in the table's meta data
**** debug Wed Dec 05 01:52:43 PST 2012 1354701163290 /atg/epub/DeploymentServer Run first apply phase: true
**** debug Wed Dec 05 01:52:43 PST 2012 1354701163292 /atg/epub/DeploymentServer Target not configured for switch. Skipping switchable datasource verification.
**** debug Wed Dec 05 01:52:43 PST 2012 1354701163407 /atg/epub/DeploymentServer DistributedDeploymentAdapter:DAF Deployment with ID: 18600003 previously deployed.
**** debug Wed Dec 05 01:52:43 PST 2012 1354701163410 /atg/epub/DeploymentServer DistributedDeploymentAdapter:Deploy Data
**** debug Wed Dec 05 01:52:43 PST 2012 1354701163410 /atg/epub/DeploymentServer DistributedDeploymentAdapter:Resuming DAF deployment with ID: 18600003
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer --- CONTAINER:atg.deployment.common.DeploymentException: Deployment '18600003' to target 'Production' encountered a system level deployment error during data transfer.; SOURCE:atg.deployment.DistributedDeploymentException: Cannot resume deployment 18600003 because it was cancelled before the deployment data and markers were saved.
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.common.ResourceUtil.exception(ResourceUtil.java:414)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.adapter.DistributedDeploymentAdapter.deployData(DistributedDeploymentAdapter.java:1399)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.adapter.DistributedDeploymentAdapter.transferData(DistributedDeploymentAdapter.java:278)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.server.Deployment.run(Deployment.java:1951)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at java.lang.Thread.run(Thread.java:662)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer Caused by :atg.deployment.DistributedDeploymentException: Cannot resume deployment 18600003 because it was cancelled before the deployment data and markers were saved.
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.DeploymentManager.deploy(DeploymentManager.java:1069)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.adapter.DistributedDeploymentAdapter.resumeDafDeployment(DistributedDeploymentAdapter.java:1944)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.adapter.DistributedDeploymentAdapter.deployData(DistributedDeploymentAdapter.java:1307)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.adapter.DistributedDeploymentAdapter.transferData(DistributedDeploymentAdapter.java:278)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at atg.deployment.server.Deployment.run(Deployment.java:1951)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer at java.lang.Thread.run(Thread.java:662)
**** Error Wed Dec 05 01:52:43 PST 2012 1354701163792 /atg/epub/DeploymentServer
**** Warning Wed Dec 05 02:03:14 PST 2012 1354701794489 /atg/dynamo/service/ClientLockManager The useLockServer property of: /atg/dynamo/service/ClientLockManager is false and so global locking is disabled
**** Warning Wed Dec 05 02:04:43 PST 2012 1354701883454 /atg/epub/PublishingRepository Using default JDBC type for: project:tar1552 could not find this column in the table's meta data
**** Warning Wed Dec 05 02:05:41 PST 2012 1354701941339 /atg/epub/PublishingRepository Using default JDBC type for: project:tar1557 could not find this column in the table's meta data
Thanks ,
Sharif.

Hi,
I faced the same issue while opening the merchandiser tab in the BCC(after providing the credentials error dialog appearing the UI side and log showing the error whatever you mentioned). But issue resolved after initiating a full deployment and the restarting the publishing server.:)))))

Deployment '124500010' to target 'tar12462' encountered a system level dep

Hi Experts,
I'm trying to do initial deployment in Agent BCC. I'm getting below error while deploying
' Deployment '124500010' to target 'tar12462' encountered a system level deployment error during data transfer. '
and Details
Message Detail:
CONTAINER:atg.repository.RepositoryException; SOURCE:java.sql.SQLException: ORA-00942: table or view does not exist at atg.adapter.gsa.Utils.deleteAllItems(Utils.java:1384) at atg.adapter.gsa.Utils.deleteAllItems(Utils.java:1524) at atg.adapter.gsa.Utils.deleteAllItems(Utils.java:1674) at atg.deployment.repository.RepositoryWorkerThread.prepareFullDeployment(RepositoryWorkerThread.java:636) at atg.deployment.repository.RepositoryWorkerThread.preDeploymentPhase(RepositoryWorkerThread.java:525) at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:310)
It's saying that Table doesn't exist, but I went through log, I didn't found any table name(Which table it's trying to search).
Can you help me to fix this issue.
Thanks & Regards,
Murali.Ch

Hi,
It seems that your DB is not upto date with the deployed code. It has some missing table as evident from the error. If you can try some DB comparison tool and compare the DB with other environments on which BCC deployments are running fine.
1. Do a full deployment
2. If it fails with same error it means DB isnt in sync.
3. Copy that from other environment or do by a DB checker tool/ comparison tool.
4. Resume deployments.
Thanks

System level location of deployment.config

According to http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html, the system level deployment.config can be found in one of two locations on windows:
(1) <Windows Directory>\Sun\Java\Deployment\deployment.config
(2) ${deployment.java.home}\lib\deployment.config
The documentation is a bit sketchy as to what determines which location it checks. From my testing, it seems that if you have a JDK installed, it looks for it in (1). If you only have a JRE installed, it looks for it in (2). Can someone confirm this? Secondly, why does WebStart via a JDK install look in one location while WebStart via a JRE look in another? Why can't it simply search in one location?

JRE/JDK makes no difference. Java Web Start is in the JRE, so you actually need a JRE to run javaws.
Webstart will always look first in (1) , and if no deployment.config is found, it will look in the lib directory of the jre that javaws is in. (2)
However, updating a JRE will (until after 6u4) put the new JRE in a new directory, so you would loose any customization done to the old JRE (such as putting a deployment.config in in) so (1) is preferred, unless you want the config to only apply to a specific update version.
/Andy

JRE System-level settings does not work - JRE1.6.30

Good day,
I need to set deployment.security.mixcode parameter to "DISABLE" within of deployment.properties configuration file.
Also I wish to place the deployment.properties configuration file is not user-specific path. The default location is
<User Application Data Folder>\Sun\Java\Deployment\deployment.properties.
TO change the default location I read about possibility to use the deployment.config for specifying the System-Level
deployment.properties in the infrastructure.
Unfortunatelly seems does not work. Someone have got experience about system level settings of deployment.properties?
This is the configuration I have used.
deployment.config:
deployment.system.config.mandatory=FALSE
deployment.system.config=file/:C:\Program Files\Java\jre6\lib\deployment.properties
deployment.properties:
#deployment.properties
#Fri Feb 17 15:54:57 CET 2012
deployment.version=6.0
deployment.capture.mime.types=true
deployment.browser.path=C\:\\Program Files\\Internet Explorer\\iexplore.exe
#Java Deployment jre's
#Fri Feb 17 15:54:57 CET 2012
deployment.javaws.jre.0.product=1.6.0_31
deployment.javaws.jre.0.registered=true
deployment.javaws.jre.0.osname=Windows
deployment.javaws.jre.0.platform=1.6
deployment.javaws.jre.0.path=C\:\\Program Files\\Java\\jre6\\bin\\javaw.exe
deployment.javaws.jre.0.location=http\://java.sun.com/products/autodl/j2se
deployment.javaws.jre.0.enabled=true
deployment.javaws.jre.0.osarch=x86
deployment.security.mixcode=DISABLE <<====
Thank you in advance
Adriano C.
Edited by: user12025469 on Feb 20, 2012 6:23 AM
Edited by: user12025469 on Feb 20, 2012 7:48 AM

user12025469 wrote:
This is the configuration I have used.
deployment.config:
deployment.system.config.mandatory=FALSE
deployment.system.config=file/:C:\Program Files\Java\jre6\lib\deployment.propertiesHm, try using a file URL like this:
file\:C:/Program Files/Java/jre6/lib/deployment.propertiesI believe that the file is interpreted as a properties file, which means the colon and slashes need to be escaped. This would be it if you want to use a proper Windows path:
file\:C:\\Program Files\\Java\\jre6\\lib\\deployment.properties

Invoice Tolerance - System Level

Hi
I've been looking at setting invoice tolerances to block invoices outside set limits.
I am aware I can create invoice tolerance and set these at vendor level but to make maintenance of this simple can you set invoice tolerances at system level i.e. one tolerance rate that applies to all invoices recieved?
Many Thanks for you help.
Chris

Please check these links for details:
Invoice verification tolerance limits
Re: RE: Invoice Tolerance
Invoice Tolerance key BW.
Re: Tolerance in invoice verification
Edited by: Afshad Irani on Apr 29, 2010 9:11 PM

BindByName system level setting

Is there or will there ever be a system level parameter for OracleCommand.BindByName. It's very frustrating to have to set it everywhere, especially if you have common frameworks that use the generate IDbCommand/IDbConnection interfaces with a Connection factory.
We had to put an explicit type test into our Persistance framework just to see if it was an OracleCommand and set that property. That means EVERY call regardless of the target database has to go through that check.

G'day,
Open the Java Console and execute "dump system and
deployment properties" which shows property values,
and see if what you want is there.Thanks, but I don't think I can use these at the system level, can I?
I did try using ${user.home} but that doesn't work.
So, are there any variables other than $USER_HOME and $JRE_HOME that can be used when setting system level properties?
More info, http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html
Thanks,
Chris.

Error : Unicode setting doesnot match source system in BW

Hi All,
While replication data in BW im facing the following error :
unicode setting doesnot match source system.
Kindly suggest.
Regards,
Amit Miglani.

Hi,
We have installed a fresh BIW server on MSSQL database 2005. We have selected components like as ABAP.JAVA,EP,EP Core ,BI Java. While replicating the datasource using tcode RSA1 from R/3 Retail Server we are getting an error Error in module RSQL of the datasource inter face .
Details of Support package level-:
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
PI_BASIS 2006_1_700 0007 SAPKIPYM07 Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW 700 0018 SAPKW70018 SAP NetWeaver BI 7.0
BI_CONT 703 0008 SAPKIBIIP8 Business Intelligence Content
Please suggest us the solution.
Note: we are not getting any dump in st22. we have already checked the note 1162821
Regards,
Amit Miglani.

How to enable BPEL loggers at domain and system level ?

As far as I know there are two kind of BPEL loggers
- at domain and
- system level
Where EXACTLY can I enable/disable them resp. set them to e.g. DEBUG mode?
Peter

Apart from the posts mentioned above, please note that log4j-config.xml is the files that has these logging entries.
For domain level : SOA_ORACLE_HOME\bpel\domains\default\config\log4j-config.xml
For system level : SOA_ORACLE_HOME\bpel\system\config\log4j-config.xml
You set these loggers on domain level or system level depending on the information you are interested to see, so set that particular logger.

System-level AbbreDailing

We are using CCM6.0 right now. We would like to implement AbbreDailing, for example:
**000 will goes to a number in China.
**001 will goes to a number in Japan.
we have over 100 abbreDailing number, and we need them to be avaliable in system level so every user can use it.
Any idea how to implement it?

You can use Translation Patterns, that would be the simplest way to make it work.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmcfg/bccm.pdf
The only caveat that I forsee is that translation patterns call out using whatever calling search space is assigned to the translation pattern. Which is OK if you have a single site and everyone dials out one way. But if you have multiple sites and they hit one translation pattern it will dial out one site. Which may or may not be OK. Just depends on you business structure. If start setting up a set of translation patterns per location that could get out of control quick.
I have also seen some custom directory done which was a modified corporate directory, where it queries DC Directory and it only pulls records that have something like "SpeedDial" in the Departmnet field but that was long ago. It would be optimal though because it then would use the phones dialing rules when placing a call to the contact.

Setting "javaplugin.maxHeapSize" at System level deployment

Similar Messages

Maybe you are looking for