Setting Node Attributes for a non singleton node

HI,
I want to know what is the correct way to set attributes for a non singleton node dynamically.
I have node A which contains the non singleton node B.
At runtime I want to change the attributes of node B dynamically. What is the correct way for this?
When I try wdContext.nodeB().getNodeInfo I get a NullPointerException.
For example this code works: wdContext.nodeA().getAElementAt(0).nodeB().getNodeInfo(). Here I get the node info.
But when I set attributes for the second line, are there valid for all Elements in Node B?
What is the correct way to set the attribut infos for non singleton Node B?
Best regards,
Peter

Hi Peter
The main rule here - do not touch node instances at all. Deal only with node metadata:
IWDNodeInfo nodeBInfo = wdContext.getNodeInfo().getChild("node A").getChild("node B");
nodeBInfo.getAttribute("xAttr");
nodeBInfo.addAttribute(...);
BR, Siarhei
Edited by: Siarhei Pisarenka on Jan 13, 2010 12:55 PM

Similar Messages

Context Mapping for Non-Singleton Node

Hi ,
I have following context structure
Node_A
|     attr 1
|________ Node_B
                              attr2
                              attr3
Node_B is the child of Node_A. NOde_B has attributes attr2 and attr3.
Node_B is a Non SIngleton Node.
Node_B is mapped to Node_View of the View Controller.
Node_A had 2 elements. Initially Element 1 is the Lead selection Element for Node A. I get the reference for Node_B using the Lead Selection Path
NodeA_element1 = Node_A->GET_ELEMENT( ).
Node_B = NodeA_element1->GET_CHILD_NODE( 'NODE_B' ).
Node_B is filled with elements, lets say attr2 = 'Dallas', attr3 = 'Detroit'
Node_View shows the values Dallas and Detrait since its mapped to Node_B
Now the Lead selection of Node_A changes to 2.
I again gett he reference for NOde_B usign the Lead Selection Path (index 2)
NodeA_element2 = Node_A->GET_ELEMENT( ).
Node_B = NodeA_element2->GET_CHILD_NODE( 'NODE_B' ).
Node_B is now filled with, lets say attr2 = 'Mexico', attr3 = 'Canada'
Since element 2 is Lead selection for Node A, now, and NodeB is mapped to Node_View, I expect the contents of Node_View to be attr2 = 'Mexico', attr3 = 'Canada' since this is along the Lead Selection of Node_A
But it stays attr2 = 'Dallas', attr3 = 'Detroit'
So in a nut shell, the Context Mapping of the Non Singleton Node DOES NOT map the Lead selection Path when its parent , changes in Lead Selection.
Is this a BUG ?
Thanks

Hi Anand,
There is no bug. See when you are saying
"Node_B is now filled with, lets say attr2 = 'Mexico', attr3 = 'Canada' "
I am just not sure how you have filled the data in node B. Because the way u populate node data that way only you can get the data. The way you want to get data you must populate data in this way:
1. Get Node A instance let say in lv_node_A.
2. Get Node A element instance (lead selection) in your case lets say in lv_elem_A.
3. Now get node B instance by lv_elem_A->get_child_node( 'B' ) lets say in lv_node_B.
4. Create element of lv_node_B and bind it to the node B and also populate the value of attributes.
Repeat the steps as per your requirement. Also Singleton and Non singleton has nothing to do with this it is all about how the instances will be manged in the memory.
Look at this sample code and will help you while populating data in nested nodes:
    DATA lo_nd_a TYPE REF TO if_wd_context_node.
    DATA lo_el_a TYPE REF TO if_wd_context_element.
    DATA lo_nd_b TYPE REF TO if_wd_context_node.
    DATA lo_el_b TYPE REF TO if_wd_context_element.
    DATA ls_a TYPE wd_this->element_a.
    DATA lv_test LIKE ls_a-test.
    data lv_btest type string.
navigate from <CONTEXT> to <A> via lead selection
    lo_nd_a = wd_context->get_child_node( name = wd_this->wdctx_a ).
@TODO handle not set lead selection
    IF lo_nd_a IS INITIAL.
    ENDIF.
    data count type c.
    data count_i type i value 1.
    do 2 times.
      lo_el_a = lo_nd_a->create_element( ).
      lo_el_a->set_attribute(
      EXPORTING
        name = `TEST`
        value = count_i ).
      lo_nd_a->bind_element( new_item = lo_el_a
                             SET_INITIAL_ELEMENTS = abap_false ).
      lo_nd_b = lo_el_a->get_child_node( 'B' ).
      lo_el_b = lo_nd_b->create_element( ).
      move count_i to count.
      concatenate count 'in node b' into lv_btest.
      lo_el_b->set_attribute(
      EXPORTING
        name = `BTEST`
        value = lv_btest ).
      lo_nd_b->bind_element( new_item = lo_el_b
                             SET_INITIAL_ELEMENTS = abap_false ).
    count_i = count_i + 1.
    enddo.
This code will set value 1 and 2 in node A's test attribute. and on change of lead selection between 1 and 2 it will show value of attribute BTEST in node B as 1 in node B and 2 in node B...
Regards,
Neha

How to instantitate a non-singleton node

I need to instantitate the non-singleton node which has the following properties
Collection cardinallity of 0..n
and
Selection Cardinallity of 0..1
But when I try to get this node using wdContext.nodeA().nodeB()
where
nodeA is singleton
nodeB is non-singleton whose properties are given below
I always get nodeB as null . it seems nodes are initialized only if set to singleton
I need non-singleton node for using the TableRowGrouping element
If any one can please help that will be great

Hi Gaurav,
You have not mentioned nodeA properties.If it's cardinality is 1..x then no need to initialize A otherwise you must initialize A first then initialize nodeB.
Try like this:
//If cardinality of A is not 1...1
IPrivateTrstView.IAElement ele = wdContext.createAElement();
//Set if there are any attributes
ele.setXXX();
wdContext.nodeA().addElement(ele);
IPrivateTrstView.IBElement ele = wdContext.createBElement();
ele.setXXX();
wdContext.nodeB().addElement(ele);
The singleton property refers the relationship between the node and its parent but not between the node its child as for as I know.
Regards,
Siva

Setting archive attribute for files

Hi,
I've written a program to make backups from files. I'd like to set archive attributes for files so the program knows which files have changed since the last backup.
Is there any way to do that?

nope,
unless you write your own dll with VB or C++ and call this through native methods.
Try to find a workaround.

How to set CORS properties for BLOB Storage using node?

Hi - I just got started with Azure using a Node-based web site and mobile services.
I am following various documentation in order to provide an API for users to upload images via a time-restricted SAS for the BLOB Storage.
In order to upload my image, I need to set the CORS configuration for the BLOB Storage. Unfortunately this cannot be done via the management portal.
I'm unclear as to how to accomplish this. I'm considering using the startup.js file in my mobile service to make a post request to the BLOB Storage REST API:
http://msdn.microsoft.com/en-us/library/windowsazure/hh452235.aspx
Are there appropriate methods in the Node SDK to make this easier, especially the signing part?
What is the recommended way for setting CORS properties for the BLOB Storage via Node?
Thanks for your help
Stefan

Unfortunately Node SDK does not support CORS functionality yet. Your option would be to write code which consumes the REST API for setting CORS. Not sure if it helps but there's a free tool out there written by my company which you can use to set CORS
on your storage account. More information about this tool can be found here:
http://blog.cynapta.com/2013/12/cynapta-azure-cors-helper-free-tool-to-manage-cors-rules-for-windows-azure-blob-storage/
Hope this helps.

How to set a attribute value of a sub node binded to a table.. pls respond.

Hi friends,
I have context defined like this.
     Head_node ( table 1)
          Item_node ( table 2, sub node ). ( now this im saving in global internal table).
so now when i hit save button, im passing my internal table (it has col1- sales order no, col2 item details(table type, which can have more than one record) to a FM, to create sales order.
My sales order is getting saved.
But the function module will return some new values (like sales order number, item number etc).
Now i want these values to be updated in my context.
Meaning whenever after that i do get_attribute, i should get these new (sales order no, item no ) also.
I dont know how to set the context values of sub nodes , so im missing these values.
kindly respond back to me..
thanks in advance,
Niraja

Its very simple.
Follow these steps. e.g you want to get the new sales order number. Define a attribute in ur node (or set of attributes in ur case as per reqruirement) say new_so_number.
Check your FM, if its returning new_so_number then it's fine, otherwise you have to change the FM to return the new_so_number or you have to get from db table somehow, which best suites your req.
So once you have new_so_number after calling the FM, say in lv_new_so_number field. Then write this code to set the attribute (change the variables as per your context attributes)
DATA lo_nd_head TYPE REF TO if_wd_context_node.
DATA lo_el_head TYPE REF TO if_wd_context_element.
DATA ls_head TYPE wd_this->element_head.
DATA lv_new_so_number LIKE ls_head-new_so_number.
* navigate from <CONTEXT> to <HEAD> via lead selection
lo_nd_head = wd_context->get_child_node( name = wd_this->wdctx_head ).
* get element via lead selection
lo_el_head = lo_nd_head->get_element( ).
lv_new_so_number = new_so_number. " (You got this as a exporting parameter of FM etc..)
* get single attribute
lo_el_head->set_attribute(
    EXPORTING
      name = `NEW_SO_NUMBER`
      value = lv_new_so_number ).
Hope it works.

ABAP: dynamic context node + attribute for DROP_DOWN_BY_KEY

Hello,
I need to create a Node with attributes dynamically and than assign it to a DROP_DOW_BY_KEY element in ABAP.
I create drop down this way:
drop_down_figure = cl_wd_dropdown_by_key=>new_dropdown_by_key( bind_selected_key = 'REPOSITORY.FIGURES' on_select = 'GET_OPERATOR' ).
cl_wd_grid_data=>new_grid_data( element = drop_down_figure ).
ui_container->add_child( drop_down_figure ).
However, here I bind to REPOSITORY.FIGURES. Instead of doing this I need to bind it to an attribute that I create.
I can access wd_context but I am not sure how to create a node in wd_context, then attribute for that node that will contain items for drop down.
bind_selected_key is type of String. If I create a node with attribute how do I cast it to a String so I can pass it to a constructor of a drop down?
Thank you.

Hi Georgy,
There is a 3 - series weblog for this.
The first one is:
/people/thomas.szcs/blog/2005/12/28/dynamic-programming-in-web-dynpro-abap--introduction-and-part-i-understanding-ui-elements
The following are the the general steps for creating a node and table where table name is input by the user:
DATA:
UI Elements
    group_1       TYPE REF TO cl_wd_uielement_container,
    new_tab       TYPE REF TO cl_wd_table,
Context Nodes
    dyn_node      TYPE REF TO if_wd_context_node,
    tabname_node TYPE REF TO if_wd_context_node,
Node Info
    rootnode_info TYPE REF TO if_wd_context_node_info,
Data Reference (for internal table)
    stru_tab      TYPE REF TO data,
String (for table name)
    tablename     TYPE string.
FIELD-SYMBOLS:
    <tab> TYPE table.
1) * get node info of context root node
rootnode_info = wd_context->get_node_info( ).
2) * create sub node named TEST1 of structure (tablename)
cl_wd_dynamic_tool=>create_nodeinfo_from_struct(
    parent_info = rootnode_info
    node_name = tablename
    structure_name = tablename
    is_multiple = abap_true ).
3) * get instance of new node
dyn_node = wd_context->get_child_node( name = tablename ).
4) ***** create new UI element table *******************************************************
new_tab = cl_wd_dynamic_tool=>create_table_from_node(
ui_parent = group_1
table_id = 'TESTTAB'
node      = dyn_node ).
5) ***** fill context node with data *******************************************************
create internal table of (tabletype)
CREATE DATA stru_tab TYPE TABLE OF (tablename).
ASSIGN stru_tab->* TO <tab>.
Get table content
SELECT * FROM (tablename) INTO CORRESPONDING FIELDS OF TABLE <tab>.
Bind internal table to context node.
dyn_node->bind_table( <tab> ).
Regards,
Srini.

Problem setting VI_ATTR_SUPPRESS_END_EN Attribute for my TCPIP MBSession

Hello,
im using the NI-VISA for c#.
I have to set the VI_ATTR_SUPPRESS_END_EN Attribute to false in order to get my query with an instrument working.
I have already checked it with MAX and its working perfectly. In MAX there is a checkbox on the VISA test panel to change this property.
Unfortunately i can't find a "VI_ATTR_SUPPRESS_END_EN" property of my TCPIP MBSession Object in my Visual Studio - C#.
There are lots of properties but this one is missing!!! :-(
Why is it missing? What else can i do to set this attribute?
Thanks in advance!

After a little more digging, I noticed that there are some public methods on Session to directly access VISA attributes. The tricky part is that they are decorated with the [EditorBrowsableAttribute(EditorBrowsableState.Never)] attribute, which hides them from Visual Studio Intellisense. This solved my problem:
session.SetAttributeBoolean(AttributeType.SuppresEndEn, false);
where session is a MessageBasedSession object
Thanks,
James

Setting screen attributes for select-option in subscreen

Hello SDN Community, I have researched this extensively in forums and found much helpful information in getting the select-option working in a subscreen. Also found information that discussed using standard AT SELECTION-SCREEN statements to process the sub-screen with.
I encountered problems when that from the LOOP AT SCREEN within the AT SELECTION-SCREEN OUTPUT, I set the INPUT/OUPUT attributes to zero, the field was still open for input when it displayed. For when I do this on other fields of my screen, they are "greyed out".
Has anyone any experience setting field attributes from within loop at screen for embedded select-option subscreen? Would appreciate any insight you might have.
Thank you,
Dean Atteberry.
P.S.- I put this thru the debugger and I can see the INPUT and OUTPUT attributes getting changed. But when displays, it is like the change didn't happen.
Full description of my processing below...
I have a screen with four radio-buttons. Under the first radio-button is my embedded subscreen with one SELECT-OPTION for AUFNR. Under the other three radio-buttons are single fields declared regular way in main screen.
In my PBO of main screen I have loop at screen that enables/disables INPUT and OUPTUT attributes based on which radio-button is selected. This prevents confusion from user entering values in fields other than the one the radio-button is selected for.
For my embedded select-option subscreen, I have an AT SELECTION-SCREEN OUTPUT statement in which I have a LOOP AT SCREEN. Within that, based on radio-buttons, I either enable or disable the INPUT and OUTPUT attributes for the S_AUFNR-LOW and S_AUFNR-HIGH fields.
Edited by: Dean Atteberry on Mar 25, 2009 4:39 PM

>> I think that you are trying to change select options within main screen, whereby it should be
>> changed in PBO of that subscreen. You said you do it in AT SELECTION-SCRREN OUTPUT which
>> will be only applicable for selection screen (I guess your main screen here). Do loop at screen in
>> PBO module of this subscreen not in PBO of the selection screen and see if that helps.
Hi Marcin, thank you for your reply. My "main screen" is not my "selection screen". Please allow me to further clarify...
My "main screen" has four radio buttons with a subscreen area under the first one and single fields under the others.
My "subscreen" is auto-generated by Selection-Screen and Select-Options statements which are in my TOP module.
I call my auto-generated select-option subscreen in my PBO with...
call subscreen sca_ordr including sy-repid scr_0121.
and in my PAI with...
call subscreen sca_ordr.
In order to do LOOP AT SCREEN for my system-generated select-option subscreen, I use the AT SELECTION-SCREEN OUTPUT event in which to put my loop.
When I walk thru this in the debugger, I can see it setting INPUT/OUTPUT fields to zero, but when the screen displays, there are no changes to my subscreen.... Fields should be "greyed out" instead they are open for intput.
Doing my best to accurately describe in as few words as possible. Thank you for your ideas!
Dean.

MM06E005 - how to set screen attributes for custom fields?

Hi all,
I have implemented enhancement MM06E005. I have added my custom fields to CI_EKPODB. I have created and activated all the dynpros. I modified subscreen 0111 (items) to contain my new custom fields. I have activated the function exits (016,017,018) for the item screens. I am able to save data using the new custom fields on subscreen 0111.
What I am having trouble with is modifying the screen attributes for the new custom fields that I placed on subscreen 0111. I know it should be in exit 016(PBO) and I need to check the action type. I tried a "loop at screen" but my fields were not there.
How do I modify the screen attributes? Also, can I change the "Tab" text from "Customer Data" to be something else?
Any help would be appreciated.
Thanks, Mark

Hi,
In the PBO of the screen 0111, create a module. And in that module you can do LOOP AT SCREEN..where the screen elements will be available..
Thanks
Naren

Set XML-Attributes for multiply objects

Hi everybody,
this is my situation. I have a document with several pages and several objects on each page.
now I want to get the coordinates and the dimensions of a object and write down the datas as a XML-attribute.
The script should do this for every object in my document.
That's what i got so far:
function creatAtt(){
    for (var i = 0; i < app.selection.length; i++){
    var myObject     = app.selection[i];
    var myXMLobject = myObject.associatedXMLElement;
    var ycoords     = myObject.geometricBounds[0];
    var xcoords     = myObject.geometricBounds[1];
    var width         = myObject.geometricBounds[3] - myObject.geometricBounds[1];
    var height         = myObject.geometricBounds[2] - myObject.geometricBounds[0];
    myXMLobject.xmlAttributes.add ("Y-Koordinate", ycoords.toString() + " px");
    myXMLobject.xmlAttributes.add ("X-Koordinate", xcoords.toString() + " px");
    myXMLobject.xmlAttributes.add ("Width", width.toString() + " px");
    myXMLobject.xmlAttributes.add ("Height", height.toString() + " px");
creatAtt();
When I select a object and run the script it only writes the data for the selected object, not for all objects. Somebody a tip how to fix it???

Hi,
I have tried the script. And it only writes down the attributes for one object. Directly in the root. I have attached a screenshot. But i want to write the attributes in the hotspot Tags of the selected object.
I hope you know what I mean .
I dont know where he gets the datas bot that are not the datas of one of my three objects.
I changed the scrip a little bit:
var myDoc     = app.activeDocument;
var myPages = myDoc.pages;
for (var i = 0; i < myPages.length; i++){
    var myActualPage = myPages[i].pageItems;
    for (var j = 0; j < myActualPage.length; j++){
        var myObject     = myActualPage[j];
        var myXMLobject = myObject.associatedXMLElement;
        var ycoords     = myObject.geometricBounds[0];
        var xcoords     = myObject.geometricBounds[1];
        var width         = myObject.geometricBounds[3] - myObject.geometricBounds[1];
        var height         = myObject.geometricBounds[2] - myObject.geometricBounds[0];
        myXMLobject.xmlAttributes.add ("Y-Koordinate", ycoords.toString() + " px");
        myXMLobject.xmlAttributes.add ("X-Koordinate", xcoords.toString() + " px");
        myXMLobject.xmlAttributes.add ("Width", width.toString() + " px");
        myXMLobject.xmlAttributes.add ("Height", height.toString() + " px");
But then I get a error message:
Errornumber: 21
null is not an object.
Row 60 --> He means this part of the script: myXMLobject.xmlAttributes.add ("Y-Koordinate", ycoords.toString() + " px");

Setting transaction attributes for EJB Create methods

Dear developers
How do I set transaction attributes at the method level. I am able to set this only at the bean level.
I am trying to use container managed transactions.
Thanks
Naveen

if you specify * in the <method-name> element, then it is the bean
otherwise, you can specify a particular method name in the <method-name> element.
Best regards...
Dear developers
How do I set transaction attributes at the method
level. I am able to set this only at the bean level.
I am trying to use container managed transactions.
Thanks
Naveen

Trouble setting AD attribute for UserAccountControl

I am trying to set UserAccount Control value to 262658 so that Account is disabled and Smart card is required are checked.
But for some reason the user is getting created the useraccount control value is not updating.
This is simply what I am doing
<set name='user.accounts[AD].userAccountControl '>
<Integer>262658</Integer>
</set>
Just a background on this. I am creating a user with all the other attributes updated and then checkin the user view then set user as disabled. After that is done I am doing a checkout and then setting the accountControl Value as above and then checkin the view.
Please let me know if you have any idea why I can't set the accountcontrol value.
Thanks.

You have to use the Postscript name of the font. Create a text layer with
the font you want to use. Select the text layer and run this script:
docRef = activeDocument;
if (docRef.activeLayer.kind == LayerKind.TEXT)
alert("Font name is " + app.fonts[docRef.activeLayer.textItem.font].name +
"\n" +
"Postscript name is "+
app.fonts[docRef.activeLayer.textItem.font].postScriptName + "\n" +
"Style is " + app.fonts[docRef.activeLayer.textItem.font].style+ "\n"
+
"Anti-alias is " + docRef.activeLayer.textItem.antiAliasMethod);
else
{alert("Active layer is not a text layer");
Larry

Web-services.xml: cannot set "charset" attribute for alternative encoding

Hi,
the definition of the charset attribute in tag web-service in a web-services.xml
descriptor gets lost, when deploying a web-service.
Sample:
Before deployment I defined:
<web-service charset="ISO-8859-1" useSOAP12="false" targetNamespace="http://www.itpearls.com/unity/SubscriberData"
name="WebSubscriberDataCollector" style="rpc" uri="/WebSubscriberDataCollector">
After deployment the console states:
<web-service jmsUri="ISO-8859-1" useSOAP12="false" exposeWSDL="true" targetNamespace="http://www.itpearls.com/unity/SubscriberData"
name="WebSubscriberDataCollector" style="rpc" uri="/WebSubscriberDataCollector">
So the value "ISO-8859-1" changed his master :-(
I consider this a bug. Is there a workaround for the charset definition of an
individual web-service?
Thanks for an comments
Manfred

Hi Neal
my server's locale is not en_US. The locale command delivers:
$ locale
LANG=de_CH.ISO8859-1
LC_CTYPE="de_CH.ISO8859-1"
LC_NUMERIC="de_CH.ISO8859-1"
LC_TIME="de_CH.ISO8859-1"
LC_COLLATE="de_CH.ISO8859-1"
LC_MONETARY="de_CH.ISO8859-1"
LC_MESSAGES="de_CH.ISO8859-1"
LC_ALL=de_CH.ISO8859-1
but the Weblogic Server remains stubborn on all possibilities according to http://e-docs.bea.com/wls/docs81/webserv/i18n.html#1069538
and keeps complaining:
java.io.CharConversionException: Malformed UTF-8 char -- is an XML encoding declaration
missing?
My analysis: The Weblogic server seems to expect a UTF-8 compliant stream (due
to the current user.language property set to "de") regardless of the chosen configuration
possibilities proposed on the above mentioned link page.
Q: is this bug related to CR105388 on http://e-docs.bea.com/wls/docs81/notes/issues.html
Now I urgently need a workaround to make Umlaute contained in a web service request
working.
Thanks for any help
Manfred
"Manfred Sturm" <[email protected]> wrote:
>
Hi Neal
OK, typo. But it doesn't work. I get the console output:
java.io.CharConversionException: Malformed UTF-8 char -- is an XML encoding
declaration
missing?
plus I get following stack trace from the web-service client:
javax.xml.soap.SOAPException: Failed to read a xml element from
Vorname_aou_AOU091 Name_aou_AOU091 Ort_äou_AOU091 091A 1091 Strasse_aou_AOU091
bbcs adsl sample string
at weblogic.webservice.tools.pagegen.SampleInstance.getJavaObject(SampleInstance.java:139)
at weblogic.webservice.server.servlet.ServletBase.getJavaParams(ServletBase.java:378)
at weblogic.webservice.server.servlet.ServletBase.invokeMultiOutput(ServletBase.java:347)
at weblogic.webservice.server.servlet.ServletBase.invokeOperation(ServletBase.java:306)
at weblogic.webservice.server.servlet.WebServiceServlet.invokeOperation(WebServiceServlet.java:312)
at weblogic.webservice.server.servlet.ServletBase.handleGet(ServletBase.java:272)
at weblogic.webservice.server.servlet.ServletBase.doGet(ServletBase.java:154)
at weblogic.webservice.server.servlet.WebServiceServlet.doGet(WebServiceServlet.java:232)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
(server's locale is en_US)
Alternatively, when using "-Dweblogic.webservice.i18n.charset=ISO-8859-1"
in
I get the console output:
<Oct 7, 2003 11:46:05 AM MEST> <Warning> <Management> <BEA-141087> <Unrecognized
property: webservice.i18n.charset.>
which results in the above stack trace when invoking on the web service.
I still need a workaround within weblogic server. I cannot change the
Solaris
server's locale settings.
Thanks for an comments
Manfred
"Neal Yin" <[email protected]> wrote:
Hi Manfred,
There is a typo in code. But this should NOT affect any functionality
(charset attribute is working). Please contact support for a patch.
Thanks,
-Neal
"Manfred Sturm" <[email protected]> wrote in message
news:[email protected]...
Hi,
the definition of the charset attribute in tag web-service in aweb-services.xml
descriptor gets lost, when deploying a web-service.
Sample:
Before deployment I defined:
<web-service charset="ISO-8859-1" useSOAP12="false"
targetNamespace="http://www.itpearls.com/unity/SubscriberData"
name="WebSubscriberDataCollector" style="rpc"uri="/WebSubscriberDataCollector">
After deployment the console states:
<web-service jmsUri="ISO-8859-1" useSOAP12="false" exposeWSDL="true"
targetNamespace="http://www.itpearls.com/unity/SubscriberData"
name="WebSubscriberDataCollector" style="rpc"uri="/WebSubscriberDataCollector">
So the value "ISO-8859-1" changed his master :-(
I consider this a bug. Is there a workaround for the charset definitionof
an
individual web-service?
Thanks for an comments
Manfred

Set Font Attributes for Slide Show Captions

PSE v.6 - When creating a slide show, I can select to "Include photo captions as text" when adding slides. The font of the included text is basic with no effects (I want it to have a drop shadow). Is there a way to set the default text attributes (color, font style, drop shadow, etc.) before adding the slides or change the text on all selected slides instead of having to do it one slide at a time?

well you can add captions below the slide , if you double click on a slide and move it , it can move around , hence you can add a caption below the slide by slightly moving up the image .

Setting Node Attributes for a non singleton node

Similar Messages

Maybe you are looking for