Setting the default line separator

I have just installed CF9 on a Windows sever and I need the default line separator to be a CRLF (CHR 13 then 10).
The JVM running CF9 has the default line separator set as CR (CHR 13). Which I find odd considering the default on windows should be CRLF.
I have searched and searched and can find nothing. I know the JVM command line should look something like: "-Dline.separator=". The only problem being I cannot work out for the life of me what should follow the equals sign.
I am sure I can't be the first person needing todo this. I would appreciate any help you can give me.
Cheers

Thanks for the reply Jochem.
Unfortunately no dice. I was pretty sure I tried that, but I went ahead and tried the following again:
-Dline.separator=\r\n
-Dline.separator="\r\n"
-Dline.separator=\\r\\n
-Dline.separator="\\r\\n"
None of these variations work. Either the literal string "\r\n" is used to seperate lines, or I get a Jrun applet error trying to run and cf page.
So you understand how I am testing these. I am editing the jvm.config. Restarting the cf service. Going to "Java and JVM" under system settings and hitting submit changes, so that the jvm.config is recreated using the new line separator.
But if you have any ideas I am all ears.
Thanks

Similar Messages

How can I set the default line height?

Greetings,
I have a report that displays observed behavior in a list format like the one below:
Behavior Observed:
    Withdrawn
    Happy
    Sad
    angry
There are 5 responses as to the severity of the behavior or it is left blank if the behavior was within normal limits.
So the output would look like this:
Behavior Observed:
    Withdrawn            (mild)
    Happy
    Sad                      (moderate)
    angry
The problem is that when this report was designed the details sections were not uniformy formatted and the spacing between data elements is hard to follow from the label to the data field. I tried to set the details to be uniform by selecting "Arrange Lines", however when I do this, the data is displayed too close horizontally. So my question is how do I set the default line height for each field so that they are uniform in distance from each other but not too close due to the font height?
Does this make sense?
Thank you,
Kevin

I'm confused... How are you associating line height with horizontal field spacing???
If you have this...
Behavior Observed:     Severity:
Withdrawn          (mild)
Happy
Sad               (moderate)
angry
But want it to look like this...
Behavior Observed:
Withdrawn (mild)
Happy
Sad (moderate)
angry
all you have to do is create a concatenation formula. Something like this...
{TableName.BehaviorObserved} & " (" & {TableName.Severity} &")"
Sorry if I've misunderstood what you are trying to do.
Jason

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How can I set the default home page in Firefox 4 for all users that login to a PC on a Win 7 PC?

I work at a community college in upstate NY.
We use Firefox as the default browser at our institution and we have always set the default homepage to be our homepage for all users that login to the PC. We had a procedure to to that that worked with Windows XP and FF 3 or earlier
We would do the following:
1. go to: c:\Documents and Settings\Administrator\Application Data\Mozilla\FireFox\Profiles\<profile_name>\prefs.js
2. Add the line: user_pref (“browser.startup.homepage”,”http://www.genesee.edu”);
3. Copy the Folder
C:\Documents & Settings\Administrator\Application Data\Mozilla
To
C:\Documents & Settings\Default User\Application Data\Mozilla
4. Restart the computer
We're going to Win 7 and Firefox 4 and things seem to be different in terms of files and file structure. Does anyone know how to accomplish this?
Thanks in advance.

Making customisation from the default profile is generally considered poor practice and quite often doesn't work out as planned. (If you're interested in some more information on this, [http://mockbox.net/windows-7/227-customise-windows-7-default-profile.html see here] see here)
This article should help you with developing and deploying your customised Firefox 4 installation (without touching the Windows 7 default user profile):
http://mockbox.net/configmgr-sccm/174-install-and-configure-firefox-silently.html

How to set the default text in an input box or a label to be a predefine, multiline text

how to set the default text in an input box or a label to be a predefine, multiline text. In other words how to break the line in the code of a text box.
thank you

There are a couple of ways of doing this:
If you're editing on the canvas, press Shift + Enter.
If you're working in Express View (see lower right hand corner of Project Siena), you'll need to copy a hard return from another app such as Notepad.
I believe a better implementation of hard returns are in the list of requested functionality that you can find here:
https://social.technet.microsoft.com/Forums/en-US/2e1f9446-56b2-419a-9c17-7037d2cd6146/from-the-community-overview-of-requested-additional-functionality?forum=projectsiena
Thor

How to set the default maximum size for java's heap?

Hi!
Im trying to set the default max size for the java heap - but not from the command line.
I would like to set it higher as default on my computer.. how can I do that?
thanks!

>
...You may increase the memory heap only when you're launching a new JVM.>Much like IWantToBeBig does.
OTOH, it this is an app. with a GUI, it is easier to launch it using webstart, and request extra memory in the JNLP descriptor (the webstart launch file).

Does anyone know how to change where incoming (via mail) calendar requests go on my MacBook? Mine insist on going to Entourage, which I don't use any more. I've tried setting the default calendar in iCal preferences. Doesn't help. Bugs me. Can you help?

Does anyone know how to change where incoming (via mail) calendar requests go on my MacBook? Mine insist on going to Entourage, which I don't use any more. I've tried setting the default calendar in iCal preferences. Doesn't help. Bugs me. Can you help?

Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

Can I set the default locale for jvm

Hi,
Can I set the default locale for jvm?
How to do it?
Pan

My windows default locale is chinese .I have thought of your opinion. But in
windows nt , if I change the locale , all the environment will be
destroyed(just like reinstall it , it's difficult for me) . So , Is there
any other approach?
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Did you try to change the locale in the Windows control panel?
(Control panel -> Regional Options -> Your locale)
Pan YangBin <[email protected]> wrote:
I have tried changing this system property and other properties such
as -Duser.language=en -Dfile.encoding=Cp1252 , but all these properties
did
not changed, you can get this infomation from the log file .Maybe these
system properties are readonly.
Thanks very much.
Pan
Chris Halstead <[email protected]> wrote in message
news:[email protected]...
Try adding -Duser.region=US to the java command line used to start
WebLogic...
-chris
"Pan YangBin" <[email protected]> wrote in message
news:[email protected]...
Hi,
The problem exists in my project still exist.That is it.
When I did not set weblogic.jsp.encoding to GB2312 in my web
application(web.xml), and when the jsp file contain's chinese , the
output
will be error(error chinese) .And when I did not set it , the output
is
correct, but when I use request.getParameter("SomeFormElement")(theelement
inputed chinese), the return value is error(still chinese error).And
when
I
am in windows nt english version and do not set this property, all
these
two
problems dispear. And I try to compare the java files those were
generated
by weblogic from the jsp file , there is only two additional clause
in
the
java file. That's it:
((weblogic.servlet.jsp.JspWriterImpl)out).setEncoding("GB2312");
response.setHeader("Content-Type", "text/html; charset=GB2312");
(the web.xml has <context-param>
<param-name>weblogic.jsp.encoding</param-name>
<param-value>GB2312</param-value>
</context-param> to be set
So, I think maybe it works well if I change the default locale toenglish.
And unfortunately, your method is also failed.(I have to use weblogic
in
chinese environment)
Would you please help me to solve this problem?
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Try java ... -Duser.language=en ...
or mode con cp select=437 in the command prompt before running
weblogic.
Pan YangBin <[email protected]> wrote:
I'm using weblogic server 5.1 sp6 in chinese environment, and I
want
weblogic compile my jsp with en_us locale . So I can't use
Locale.setDefault(new Locale(...)) to set the default locale ,butI
really
want someway configure.
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Locale.setDefault(new Locale(...)) ?
Pan YangBin <[email protected]> wrote:
Hi,
Can I set the default locale for jvm?
How to do it?
PanDimitri
Dimitri
Dimitri

How to set the default language for JRE?

I appreciate the fact that JRE is intelligent enough to select language according to my system default codepage, which is 936 (Simplified Chinese). However, i don't find any option in java control panel or java.exe command line switch to change the codepage for Java back to 437 (which is the default codepage for US english). Is there any way to make the change?

Thanks, finally i have a way to eliminate Chinese characters in console output. But I'd like to go one step further. Is there any way to permanently set the default encoding for JRE? I don't like the idea of having to add -Dfile.encoding every time i run a java program.

Setting the default font

Hey,
I was just wondering if there is a way to set the default font to whatever you want. It is especially frustrating for footnotes (no matter how many times you change the font of your footnotes, every subsequent footnote is created in the default Helvetica).
I've looked around in Help and such but can't find any option to set the default font.
Thank you!
Jesse.

Jessiah87 wrote:
Hey,
I was just wondering if there is a way to set the default font to whatever you want. It is especially frustrating for footnotes (no matter how many times you change the font of your footnotes, every subsequent footnote is created in the default Helvetica).
I've looked around in Help and such but can't find any option to set the default font.
I described several time ways to do that.
It requires surgery in the index.xml file describing the used template.
Assuming that the used template is Blank.template.
Create a new document using it.
Save it as my_Blank.pages.
Using the scheme which I described many times, open its index.xml file.
To do that I use the free TextWrangler.
Search for "footnote" to reach this block of code :
You see the entry spelled <sf:fontName/>
Edit it as :
<sf:fontName>
<sf:string sfa:string="LucidaGrande"/>
</sf:fontName>
to get :
Of course, you may use an other fontname.
The rule is to use the official internal fontname.
I already posted a long list of such names.
Save the edited index.xml file
If the original document contained a index.xml.gz file, remove it so that when you will open the doc it will be forced to use the edited index.
Create a new document
Leave it empty and save it as a custom template : my_Blank.template in the dedicated folder.
Each time you will create a document starting from this template, the footnotes will be automatically created using LucidaGrande
Some lines below the fontName descriptor is the fontSize one.
The default one is :
<sf:fontSize>
<sf:number sfa:number="10" sfa:type="f"/>
</sf:fontSize>
You may edit it as
<sf:fontSize>
<sf:number sfa:number="9" sfa:type="f"/>
</sf:fontSize>
or an other integer value so the footnotes will default to this fontSize.
Of course, double check what you do.
When you will be satisfied of the result, maybe you will wish to edit the inthebox template.
It may be done but it's an other story.
Yvan KOENIG (VALLAURIS, France) dimanche 6 mars 2011 21:50:14

Setting the default respond email address in Yosemite Mail

In Mavericks I was able to set the default email address to my new address when I was replying to mail sent to me using an older address I am transitioning from. However this behavior got changed after installing Yosemite. In Mail Preferences -> Composing I do not see any place to create a default email address when responding. Only for new mail. I was wondering if it is possible to change this via command line in Terminal?

Whichever account mailbox is currently selecting in the mailboxes drawer will be the account used when selecting New to compose a new message. If no account mailbox is currently selected, the first account listed in the account's window at Mail > Preferences > Accounts is the default email account.
Tiger Mail includes a true default account selection for "Send new mail from".

Can I set the default save location in text edit to dropbox?

I'm happy with dropbox for now and want to set the default save folder to a dropbox folder but I cannot see how to do this.
Can it be done? Or do I need a 3 party text editor?
Thanks
Tom

You cannot. Because this option both takes much longer and reduces the quality of files, it has to be chosen specifically.
In any case, when you save a PDF file from Word. this process does not involve Acrobat or Adobe software in any way.

How do I set the default welcome page for PUBLIC user

gurus,
i'm using -
Oracle 9i Database
Oracle 9ias Portal Release 2
QUESTION => how do I set the default welcome page for the PUBLIC user.
i did the following to achieve this -
1. logged into portal
2. clicked on builder
3. clicked on administer tab
4. selected PUBLIC user in the Portal User Profile portlet
5. went to the preferences tab
6. in the default home page selected a custom page group
7. logged out of portal
8. open a new browsere session
9. type the portal URL and i get the login page ....??
i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
Partner Application Name Logout Status [Logout Status]
Oracle Portal (portal) logout status
The SSO Server (orasso) checkmark
buzz.resva.trw.com:7778 checkmark
infrastructure.happy.resva.trw.com checkmark
portal1.buzz.resva.trw.com checkmark
portal2.sylvester.resva.trw.com checkmark
sylvester.resva.trw.com:7778 checkmark
so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
ideas anyone ....?
thanx a bunch.
hero

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

How do I set the default Hero image in a Muse slideshow widget when using Free Form Thumbnails?

Hello,
I am trying to find out how to set the default Hero image when using a Muse slideshow widget and in the Layout section I have the "Free Form Thumbnails"
box checked.
In other words, when the page loads I want to define which image displays as the first Hero image.
If I do not select the "Free Form Thumbnails" option, the top left Thumbnail image always displays first. This is fine.
But when I select the Free Form Thumbnails" checkbox I don't know how to define which image shows first as the Hero image.
I have a short video at this link where I illustrate the question:
http://amson.org/misc/default-hero-image-1.mp4
I have added a WMV video file at the link below:
http://amson.org/misc/default-hero-image-1.wmv
Okay… I think I've worked out how to do it!
[1] First have the "Free Form Thumbnails" box UNCHECKED.
[2] Organize the Thumbnails and place the image that you want to be the first Hero image when the page loads in the top left corner of the Thumbnails group.
[3] When you "Preview Site In Browser" the Thumbnail image in the top left corner will always display as the first Hero image.
[4] If you want "Free Form Thumbnails" go ahead now and SELECT that checkbox.
[5] Whichever image was in the top left of the Thumbnail group before you checked "Free Form Thumbnails" will still show up as the first Hero image when the page loads, regardless of where that thumbnail image is located within the Thumbnail images group.
Thanks very much.
Chris.

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence. I'm having to adjust the easing of each keyframe individually.
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor? It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Setting the default line separator

Similar Messages

Maybe you are looking for