Setting the number of print lines in a Crystal 8.5 report

I want to be able to conditionally start a new page when the number of lines reaches a set amount. The report needs to print within the body of a preprinted report.
On a separate note, since Crystal changed from Business Objects it does not seem there is a knowledgebase that can be easily searched.

If you have any field in the details section that contains data then you can use the condition "NewPageAfter" that exist in section expert by right clicking on the details section and click on X+2 corresponding to "NewPageAfter" and write the condition like
remainder(recordnumber,10)=0
This prints the lines in a new page for every 10 records.
for 15 records then use this
remainder(recordnumber,15)=0
so on......
Regards,
Raghavendra

Similar Messages

MN05: setting the number of printer copies for the whole range of vendors

Hi all,
by t.code MN05 I can set the number of copies of the MM documents printed the FIRST TIME. I can do it for doc.type or vendor.
I can't set the number of printer copies for the whole range of vendors. Should I do it for each one of them?
Thanks
Gandalf

Unfortunately,
setting for document type, it doesn't work for all range of vendors.
Setting for document type, in the field "PartF" I've put in "OA". Could it depend on it?
you do for document type and then it will cover all range of vendors.
If you want prints for a specific vendor then set condition recrod for that vendor only.
regards

How to set the number of seconds a servlet is allowed to run

I use JSP to generate a report, but it will take about 10 minutes to search.
IE Client screen displays an error message what is "Cannot find out your page" after 8 minutes. How to set the number of seconds a servlet is allowed to run.

It's not a matter of how long the servlet is running... it's the browser timing out because the servlet hasn't responded to its request.
You have several options:
1) "Browser Pinging"
Your servlet sends some small data which can be either seen or unseen (html comments, hidden chars, etc) by the user at short intervals while your report is running. When the report is finished, the browser will not have timed out because it has been "snacking" on those small bits of data which tell the browser its original request was both heard and being handled. I don't think there is any timeout in IE as long as it receives data continually (or at least before its own timeout mark over and over again...)
2) Multithreaded processing
This would probably be a better approach. Have the report run in a separate thread running on the server. You'd want to store a reference to this executing report in the user's session. Instead of making the browser wait for the report to be finished, have the servlet check the user's session to see if a report exists and is running. If one does not exist, create one and start its execution. If one does exist, and is still running, print a "please wait" type of message OR an animation, etc... along with some javascript which will reload the page every few seconds. If the page reloads and the servlet sees that the report is finished, it can then display it to the user.
Hope this helps,
-Scott

How do I check the number of prints per laserjet cartridge

HP Color Laserjet CM1312 MFP nfi
Operating System: XP SP2
How do I check the number of prints on the printer

Hi Delroyaw,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How do I set the number of columns for JTextPane

I only found a method setSize() of JTextPane class. How can I set the number of columns in a JTextPane? Each column can be written one letter.
Thanks.

You're not going to use FontMetrics to change the width of the characters; you're going to use it figure out how wide a single character is. Then multiply by the number of characters you want to have in a line, and presto! You know how wide to make your JTextPane.
Unless I've misunderstood your problem, of course.

How do I pass the number of print copies to AcroExch.AVDoc

Hi,
I have the following function to print a pdf file, but I don't seem to be able to specify the number of copies I want to print, please help! How to set the number of copies to print, thanks a lot!
Sub PrintPDF(ByVal pdfFilePath As String, ByVal numCopyToPrint As Integer)
'AcroPDF1.Application
Call GetCommandBarNames
Dim myAcroApp As AcroApp
Dim myAVDoc As AcroAVDoc
Dim PDDoc As AcroPDDoc
Dim numPages As Integer
Dim IsSuccess As Boolean
Set myAcroApp = CreateObject("AcroExch.App")
Set myAVDoc = CreateObject("AcroExch.AVDoc")
myAVDoc.Open pdfFilePath, ""
Set PDDoc = myAVDoc.GetPDDoc
numPages = PDDoc.GetNumPages
myAcroApp.Show
'MsgBox "numpages = " & numPages & ", numcopies = " & numCopyToPrint
'myAVDoc.PrintPages 1, numPages, numCopyToPrint, True, True
myAVDoc.PrintPages 1, numPages, 2, True, True
'Close the PDF
myAVDoc.Close True
myAcroApp.Hide
myAcroApp.CloseAllDocs
myAcroApp.Exit
'Cleanup
Set PDDoc = Nothing
Set myAVDoc = Nothing
Set myAcroApp = Nothing
End Sub

You cannot. (Note to other readers: this is an API to Acrobat, not
Adobe Reader)
Aandi Inston

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

Ignore the number of schedule lines in sale order item when run MRP

Dear All,
I have a problem when I create production order (discrete manufacturing)
When I create a sale order with one sale order item and 3 schedule lines for this sale order item.
After that, I run MRP for this sale order, what I get is 3 planned orders for 3 schedule lines. It means that I will have 3 production orders for 1 sale order item.
I want create one production order for one sale order item whatever the number of schedule lines in sale order item.
I think I have to config in MRP. Please help me.
Thanks in advance

Dear
Check in OPPQ then look in Master data Availability Check & strategy for material also check whether u have maintained strategy for same material and see did u extended sales views for other material
As u said 3 schedule lines for this sale order item check whether u have extended sales views for next material
With Regards
Pushpalas

How do I set the number of simultaneous downloads? Per server?

iTunes always tries to download 3 podcasts at once, which leads to timeouts on podcast servers that limit the number of connections. That means I'm either missing episodes or else I need to manually babysit iTunes.
Is there a way to set the number of simultaneous downloads? I'm using XP.
Thanks.

You can turn simultaneous downloads off. In the downloads window, at the lower left. Also, while things are downloading, you can pause all but one or two.

Total of the number of stock lines held in storage at any given time

Hi Experts,
Is there a transaction we could use that will quickly give us a total of the number of stock lines held in storage at any given time? can anyone please advise
Many Thanks

Solved.
SE16 and table LQUA or LAGP. LAGP is more logical but takes longer to generate the result.
Regards
Simon

How to set the number of seconds (or time) a photo is displayed on a slideshow (ATV2)

Can I set the number of seconds a photo stays on the TV screen when I do a slideshow from my ATV2? Can't seem to find a setting on the Apple TV to do that. For the slideshow on the ATV2 I am choosing an Event from my iPhoto library and then choosing "slideshow" after adjusting the ATV2 settings for music and theme.

You can only set the time of slides with certain types of slideshows (i.e. classic and ken burns)

How to set the number of rows that an awt.Choice can display

Dear Sir,
I want to ask how an awt.Choice can set the number of rows that it can display, like the method setMaximumRowCount in JCombobox. Since I want to set more row can be displayed, but choice no any method can set. And I have tried to add Jcombobox into awt.frame, then, the handling event function cannot receive event for the right-top cornet button(minimize, maximum, close).
Best Regards,

please post a Short, Self Contained, Correct Example showing your problem.
bye
TPD

How to set the number of rows per page dynamically

Hello all,
i urgent need the option to set the number of rows per page dynamically.
I've got a parameter.
In dependence of the value of this paramter i want to set the number of rows per page of a repeating frame.
The Reports Builder version i use is 10.1.2.0.2
I defined a report trigger.
My code so far:
function R_G_BEMERKUNGFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
--what i've to write right here??
return (TRUE);
else
     return (TRUE);
end if;
return (TRUE);
end;
Can anyone help me please??
Best regards
Florian

Do you just need to change back and forth between 1 and some other number? If so, you can create two identical layouts, one with the "number of rows per page" preperty (on the repeating frame) set to 1 and the other layout set to whatever. You would have to have duplicate layouts for each group you wanted to do this with. Your format trigger on the outermost master group frame where num of rows was 1 would look like:
function M_G_ename_GRPFRFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
    return (TRUE);
else
    return (FALSE);
end if;
end;Your format trigger on the outermost master group frame where num of rows was whatever would look like:
function M_G_ename_GRPFR1FormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'N' then
    return (TRUE);
else
    return (FALSE);
end if;
return (TRUE);
end;

How to set the number of records displayed at run time

Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica

How to set the number of sockets for batch processing at runtime?

Hello all,
I need to change the execution model at runtime. I have achieved this by setting the 'ModelPath' property of the sequence file at runtime. When I set the sequence file model as batchmodel, i need to set the number of test sockets also dynamically. How can this be done? Once i set the number of sockets, i would also have to set the UUT serial number for each socket. Please help me out in solving this.
Thanks and Regards
Madhu Srinivasan.

Hi Madhu,
You can do this by inserting a sequence file callback into your main sequence and choose the ModelOptions callback. You can then use the expression step to set the "Parameters.ModelOptions.NumTestSockets" value to whatever you want. If you then use the Test UUTs execution entry point you will be prompted for serial numbers automatically. You could also use this same procedure but alter the ModelOptions callback in the process model directly, either way works just as well but I think that using a sequence file callback gives a bit more flexibility in the system.
Hope this helps,
Nick

Setting the number of print lines in a Crystal 8.5 report

Similar Messages

Maybe you are looking for