Setting up application aprovers in AE 5.2

Hi,
I'm busy configuring the AE system, and I'm trying to set the application approvers.
I have maintained the relevant connectors, the connection was sucessful. I have also managed to import the roles from the relevant connection. I have read a few notes which stated that the approvers need to exist in the UME, which they do.
However when I try to create the application approvers, I cannot select the application from the application drop-down. But when I search for the users, I do see the approvers - but cannot save the entry because I cannot select the correct application/approver id combination. Does anyone know what could cause this? Could this be an error in the User Data Source set-up? Or an error in the set-up of the UME?
Thanks in advance
Sujeet

The Application Approvers area you are trying to configure does not seem to include SAP connectors--everyone else would see exactly what you're seeing. The applications that would show up there are configured in Configuration -> Request Configuration -> Application Configuration -- these applications cannot autoprovision.
I would suggest creating a custom approver determinator.

Similar Messages

How to set an Application Item from PL/SQL

I am attempting to set an Application Item
After login to my app, I want to retrieve a row from my SETTINGS table and populate some Application Items with the settings information so that I can
display some of that settings information on every page.
Just to start, I created one Application Item named F106_YEAR
I then created a Shared Components Application Process which executes on New Session: After Authentication
I created this process as an Anynomous PL/SQL block.
declare
aucyr varchar(4);
begin
select year into auctyr
from settings;
:F106_YEAR := aucyr;
end;
I've tried a couple of other Syntax tricks attempting to reference the Application Item F106_YEAR from within PL/SQL (like V('F106_YEAR') but nothing seems to be working.
I'm sure that I am missing something simple. Can someone tell me how to set an Application Item from PL/SQL?
Thanks in advance.

I'm still doing something wrong because this is not working for me.
I've tried both of the following versions as an Application Process set to run on New Session after Authentication:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
:F106_AUCTION_YEAR:=auction_year;
end;
and I also tried:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
APEX_UTIL.SET_SESSION_STATE (p_name, p_value);
end;
F106_YEAR is a global Item (shared components).
The select statement works just fine in SQL*PLUS so I know that it is correct.
If I run the debugger and log into the application, here is the output. Shouldn't I see my Application Process get called if it is set to run on New Session after Validation?
My Application process is named RETRIEVE_AUCTION_SETTINGS
0.01: A C C E P T: Request="P101_PASSWORD"
0.01: Metadata: Fetch application definition and shortcuts
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Fetch session state from database
0.02: ...Check session 695371898690095 owner
0.02: ...Check for session expiration:
0.02: ...Metadata: Fetch Page, Computation, Process, and Branch
0.02: Session: Fetch session header information
0.02: ...Metadata: Fetch page attributes for application 106, page 101
0.03: ...Validate item page affinity.
0.03: ...Validate hidden_protected items.
0.03: ...Check authorization security schemes
0.03: Session State: Save form items and p_arg_values
0.03: ...Session State: Save "P101_USERNAME" - saving same value: "jps"
0.03: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.03: Branch point: BEFORE_COMPUTATION
0.03: Computation point: AFTER_SUBMIT
0.03: Tabs: Perform Branching for Tab Requests
0.03: Branch point: BEFORE_VALIDATION
0.03: Perform validations:
0.03: Branch point: BEFORE_PROCESSING
0.03: Processing point: AFTER_SUBMIT
0.03: ...Process "Set Username Cookie": PLSQL (AFTER_SUBMIT) begin owa_util.mime_header('text/html', FALSE); owa_cookie.send( name=>'LOGIN_USERNAME_COOKIE', value=>lower(:P101_USERNAME)); exception when others then null; end;
0.04: ...Process "Login": PLSQL (AFTER_SUBMIT) wwv_flow_custom_auth_std.login( P_UNAME => :P101_USERNAME, P_PASSWORD => :P101_PASSWORD, P_SESSION_ID => v('APP_SESSION'), P_FLOW_PAGE => :APP_ID||':1' );
0.06: ...Process "Clear Page(s) Cache": CLEAR_CACHE_FOR_PAGES (AFTER_SUBMIT) 101
0.06: Nulling cache for application "106" page: 101
0.00:
0.00: S H O W: application="106" page="1" workspace="" request="" session="695371898690095"
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2904114531488186
0.01: ...Session ID 695371898690095 can be used
0.01: ...Application session: 695371898690095, user=JPS
0.01: ...Determine if user "JPS" workspace "1040027630222986" can develop application "106" in workspace "1040027630222986"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.01: ...Metadata: Fetch page attributes for application 106, page 1
0.01: Fetch session state from database
0.02: Branch point: BEFORE_HEADER
0.02: Fetch application meta data
0.02: Computation point: BEFORE_HEADER
0.02: Processing point: BEFORE_HEADER
0.03: Show page template header
0.03: Computation point: AFTER_HEADER
0.03: Processing point: AFTER_HEADER
0.04: Computation point: BEFORE_BOX_BODY
0.04: Processing point: BEFORE_BOX_BODY
0.04: Region: Auction_Title F106_AUCTION_YEAR

How to set an application item when report column link is clicked?

I am trying to set the short name of a bread crumb entry when I drill into a detail from an interactive report page.
The master report has a column link with target = detail - "page in this application"
I can pass page items through the URL and they are set on the target page.
How can I set an application item before the target page is called?
Is there a way to set a process before the link is followed?

Kenneth,
I'm not totally sure that I understood the question but, it soounds like you want to set the value of some page items on the page that is opened when you click a link on a column in the master window. Is this right?
If so, you can achieve what you want by creating hidden page item(s) on the target page. In the master page, on which every column provides the link, go into Report Attributes, click on the link column and scroll down to the section labeled "Column Link" Within this section, set the link text to the current column value, e.g. #MASTER_REPORT_COLUMN_NAME_HERE#. Set the target to "Page in this Application" and pick the page number for the target window.
Underneath this you will see a section to set set the value for page items. If you click the flashlight, you can search for the hidden page item that you created above. Use the same value to set it as you did the link text, i.e. #MASTER_REPORT_COLUMN_NAME_HERE#. Do this and let APEX take care of passing the values on the URL.
On the child page, just set whatever control you want to dynamically pick up the value from the hidden field. For example, if you hidden field where named P4_CLEARER_NAME. You could set the title attribute to "Contact Information for &P4_CLEARER_NAME."
You need the preceeding "&" and terminating "." around the name of you hidden page item to do this.
-Joe

JMS Defined property names are set as "Application" defined properties

JMS Specification says "JMS reserves 'JMS_<vendor_name>' for provider specific properties " . so when i try to define a application property name as "JMS_Sun MicroSystems"
it is throwing the exception shown below :
javax.jms.JMSException: message property name is invalid .
This is working according to the specification but the same is not happening with JMS Defined Properties.
I am using J2EE's JMS Provider.
The JMS Specification says "JMS reserves the 'JMSX' property name prefix for JMS defined properties. "
This implies that a JMS Client Should not be allowed
to use them as "Application " property name.
For example the following code should throw JMS Exception :-
setStringProperty("JMSXUserID","abcd")
but instead it sets the application propertyname as "JMSXUserID". This behaviour is against the specification.

This behaviour is not agains the specification.
The specification table 3.3 defines who sets the properties, their type and their name. If you read the table two of the properties are set by the client, your assertion would make this behaviour contradictory.
The others are set by the provider on send or receive. This means that it does not matter what you set them to they will be overwritten when the message is sent, or received, so it is perfectly reasonable to allow the user to set this variable as it is overwritten by the provider.
If you were to try: setStringProperty("JMSXNewName", "abcd") I would expect this to fail as the property has not been defined yet, and accepting this would be contradictory to the specification.
In other words. You cannot use the prefix JMS_ or JMSX for your own properties, unless they have been defined previously by the Provider or the specification in which case they may be overwritten anyway.
Hope this helps.

Setting the "Application" thats displayed in MSSQL 2k

I have a flex project that calls several cfc files. When we
have deadlocks, we want to track down what/who was causing the
lock. In prior versions of coldfusion I heard it was possible to
set the "Application" which was displayed in the process info
listing in mssql. Any idea's on how I could go about modifying the
cfc so that I can set whats displayed in mssql?
tia

> There has to be a more simple way to accomlish this. So,
how might I
> accomplish this?
There is no way, if you want it to be precise, you need to
outlines by hand.
That's how we do, every single button by hand :)
> I originally tried this: I decided to go into Photoshop
and make the
> background of the image (all that whitespace)
transparent. It didn't work.
That's because even tho there is no color, the shape of the
image still remains
rectangular.
> Flash didn't care what part of the image was declared as
being transparent and
> what part was declared as being opaque. All of the image
was still considered
> "clickable", even whitespace.
What you could do (if the image is vector like -limited
colors) it try to trace
it in flash. Flash has the built in feature that traces
raster images into vectors.
Tho, not always produce great results, for some images it's
heaven's sent.
By converting to vector you could than easily delete unwanted
parts and keep just
the shape (group of colors) of that trace for your HIT frame.
If the map however is a photo, they you will have more luck
doing it manually by hand.
I will normally zoom IN allow and just use the brush tool to
draw.
to trace image , select your bitmap, go to Modify - Bitmap -
Trace Bitmap
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

After i changed the setting in application tab in options : open pdf doc by adobe by default, the "Ask" window still pop up every time. How to fix this ?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/913026]]</blockquote>
after i changed the setting in application tab in options : open pdf doc by adobe by default, the "Ask" window still pop up every time. How to fix this ?

How do I fix this problem ...javascript (cid) applications.

No system manager locations set, search application might not be ready yet

Hi,
I am just setting up a new SharePoint 2013 environment (Windows server 2008 R2 + SQL Server 2008 R2) and I am getting this error message in powershell when I try to save my new search topology: No system manager locations set, search application might
not be ready yet. The installation script used to install and create the search service originates from this link: http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=378 and I receive the error message after running $clone.Activate().
ULS is writing this:
05-29-2013 14:57:00.94 mssearch.exe (0x19C0) 0x1A68 SharePoint Server Search Crawler:Content Plugin cd11 Critical Content Plugin can not be initialized - list of CSS addresses is not set.
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration dkd5 High synchronizing search service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration eff0 High synchronizing search data access service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.38 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajzc7 Medium Cleanup of Orphan Systems in server SR00667 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwve Medium Synchronizing legacy admin 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai4f1 High Unable to get systemmanagerlocation from db 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai84s Medium Skipping legacy admin sync as there is no system manager location set 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwvc Medium Skipping Topology Synchronize.The active topology does not have any Components. 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajnco Medium Cleaning up Orphan nodes in system : 7B4831 8f28209c-5d35-a0cc-7fad-bd7b088335ee
So basically all else is going fine before saving the clone. Application pool is created, search service and it´s proxy is created (the databases are also created in SQL). The clone is after this created and then the components are added.
I have tested with both March and April CU. I use separate accouns for search service, installation and so on. I have tested giving the search application pool account local admin right but didnt make any difference.
Some posts in Internet around this matter is pointing towards there might be 4 missing patches like here: http://blog.steigis.ch/sharepoint/sps2013/search-in-starting-state/ They are all installed on my server.
Search host controller service and SharePoint Server Search are started.
Before creating the service I ran this. I have done this on all my other installations of search to solve the problem with the host service is in "starting" state. Info taken from here: http://mmman.itgroove.net/2012/12/search-host-controller-service-in-starting-state-sharepoint-2013-8/
$acl = Get-Acl HKLM:\System\CurrentControlSet\Control\ComputerName
$person = [System.Security.Principal.NTAccount] "Users"
$access = [System.Security.AccessControl.RegistryRights]::FullControl
$inheritance = [System.Security.AccessControl.InheritanceFlags] "ContainerInherit, ObjectInherit"
$propagation = [System.Security.AccessControl.PropagationFlags]::None
$type = [System.Security.AccessControl.AccessControlType]::Allow
$rule = New-Object System.Security.AccessControl.RegistryAccessRule($person, $access, $inheritance, $propagation, $type)
$acl.AddAccessRule($rule)
Set-Acl HKLM:\System\CurrentControlSet\Control\ComputerName $acl
$sh = Get-SPServiceInstance | ? {$_.TypeName -eq "Search Host Controller Service"}
After this I do a server restart and continue with creating the search service and its components.
Any ideas?

I had exactly the same issue when setting up a new SharePoint 2013 environment (Windows Server 2012, SP2013 with PU March 2013 and CU April 2013, .NET 4.5). I have tried almost everything during the last weeks to configure the Search Service Applicatione,
e.g. create the service from GUI, create it from PowerShell, verify my search account had enough permissions, check for missing updates etc. etc. Same error no matter what I tried.
Using another SharePoint farm I went through a similar configuration of the Search Service Application. I used exactly the same script as I did on the first server and the setup completed without any issues. So why did the same features fail during the setup?
To find an answer I compared the two farms and the only thing I noticed that were different was the lack of .NET 3.5 on the application and WFE server in the first farm. I then enabled .NET 3.5 features and now the Search Service Application works as expected
I had no idea enabling .NET 3.5 features would solve the issue - I thought .NET 4.5 was backward compatible and SharePoint only requires .NET 4.5 according the
requirements?

OSB Customization files 2 set Retry Application Errors and Timeout props

I know it's possible to set Endpoint URI, Retry Count and Retry Iteration Interval properties using customization files, but what about other properties? I am particularly interested in setting Retry Application Errors and Timeout for a HTTP business services. If it's not possible to do with customization files is there another way of setting them without having to go though each service in the console?
Edited by: user1019490 on Sep 23, 2010 2:45 AM

Yes, I guess this can be done as there is provision in ALSBCustomizationFile.xml. Below is the snippet from ALSBCustomizationFile.xml
<cus:envValueAssignments>
<xt:envValueType>Service URI Table</xt:envValueType>
<xt:location xsi:nil="true"/>
<xt:owner>
<xt:type>BusinessService</xt:type>
<xt:path>TestProject/BusinessService/TestBS</xt:path>
</xt:owner>
<xt:value>
<tableElement xmlns="http://www.bea.com/wli/sb/transports">
<URI>http://www.test.com/testService.asmx</URI>
<weight>0</weight>
</tableElement>
</xt:value>
</cus:envValueAssignments>
<cus:envValueAssignments>
<xt:envValueType>Service Retry Count</xt:envValueType>
<xt:location xsi:nil="true"/>
<xt:owner>
<xt:type>BusinessService</xt:type>
<xt:path>TestProject/BusinessService/TestBS</xt:path>
</xt:owner>
<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>
</cus:envValueAssignments>
<cus:envValueAssignments>
<xt:envValueType>Service Retry Iteration Interval</xt:envValueType>
<xt:location xsi:nil="true"/>
<xt:owner>
<xt:type>BusinessService</xt:type>
<xt:path>TestProject/BusinessService/TestBS</xt:path>
</xt:owner>
<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>
</cus:envValueAssignments>
Regards,
Karthik

Reinstallation of the Setting Wizard Application v...

Due to a complete formatting of my Nokia N72 Memoery Card,the Setting Wizard Application got uninstalled.Will the Setting Wizard Application reinstall itself if I upgrade my Nokia N72 Firmware?

Hi,
You can try something like this
data: l_cmp_api type ref to if_wd_Component,
      l_window type ref to if_wd_window,
      l_view_ctlr type ref to if_wd_View_controller,
      l_window_ctlr type ref to if_wd_window_controller.
l_cmp_api       = wd_comp_controller->wd_get_api( ).
l_view_ctlr     = wd_this->wd_get_api().
l_window_ctlr     = l_view_ctlr->get_embedding_window_ctlr().
if l_window_ctlr is bound.
   l_window = l_window_ctlr->get_window( ).
      if l_window is bound.
         l_window->set_window_title(
            "please look up the parameter name and set it here.
      endif.
endif.
Regards,
Satyajit.

Set-up application not loading for Creative Cloud. Can anyone advise?

Set-up application not loading for Creative Cloud. Can anyone advise?

Please elaborate the issue and Supply pertinent information for quicker answers:
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.
~ Arpit

Change All / Get Info issue. How to set which application opens a file?

Hello,
I would like to be able to set which application opens a specific file, but cannot get the 'Change all' option in the get info to stick, or to have scvope beyond the immediate folder. For example: whenever I download an.xml file and try to open it the application it defaults to is 'Property List editor' - so I have to go into 'get info' and set the application that I want to use to open the file. Let's say - Textmate. That file will then remain set, for the length of that session anyway - but clicking 'Change all' will not mean that the next file downloaded will default to 'Textmate', or that any .xml files outside the folder will open in Textmate. I have to set them all manually, which gets to be a drag.
I once had a little open source app. that I used to set the preferences as to which application opened a specific suffix - which worked with some, some of the time... but after a clean install I lost it - and can't remember what it was called. Anyway, it didn't entirely solve the problem, only lessened it.

[Mac OS X: Double-Clicking a File Opens the Wrong Application|http://support.apple.com/kb/TS2291?viewlocale=en_US]
*Changing the application used to open all files of a certain kind*
1) In a Finder window highlight a file of the kind you want to change the application to open that kind of file.
2) While that file is highlighted, select File > Get Info or press command (apple or propeller icon) + i to get a file information window.
3) In the lower part of the info window there is an "open with" menu with a list of applications.
4) If your application is already in the box then it is the default application for opening that kind of file and you don't need to do anything more. Close the get info window.
5) If the application showing in the menu is not the one with which you wish to open the file then select a new application. If your application does not appear there then select the "other..." and track down the application (usually in the Applications folder at the main level of the computer).
6) If you wish to change all files of this type to open with this application in future, make sure the "change all" button is selected.
7) Close the get info window.
I know that what I posted may have been what you have been doing, but wanted to double check.
I don't know to what application you are referring but application/file type association is done by Launch Services. Potentially this can become corrupted. You can use Onyx (free) utility to rebuild LS, but in doing so you will lose all non-default associations.
As with any problems, I would also make sure you have run disk utility to verify and repair your drive, and repair permissions on your computer, before doing any other actions. It's surprising what that can clear up. You can slo just try starting in Safe mode, then restarting normally and see if that helps.
[Mac OS X: Double-Clicking a File Opens the Wrong Application|http://support.apple.com/kb/TS2291?viewlocale=en_US]
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]

How to set Different applications running on the same computer to use different Gateways?

Dear All,
I would like to have different applications running on the same computer to use different Gateways (both gateways are in the same subnet).
Is it possible in Windows7 with / without a third-party utility?
Current scenario & requirements:
I have two internet connections. Both are in the same subnet (192.168.1.0/24) and connected to the same LAN switch
Gateway for the first connection is 192.168.1.1
Gateway for the second connection is 192.168.1.2
I need to set my chrome browser & google talk to use the gateway 192.168.1.1
I need to set my IE & skype to use the gateway 192.168.1.2
Is it possible? Answers are appreciated!!
Regards,
Anees

Hi,
I agree with Bill. Gateway is essentially an IP address for one network to other networks. For example, you have two networks: network A and network B, to make the two networks communicate with each other, you must go through Gateway. That is, as long
as you set Gateway, then you can make the two networks communicate with each other. The ip address for Gateway is the ip of device with routing enabled. One host machine can own multiple gateways.
Andy Altmann
TechNet Community Support

Set default application for *all* users

Hello people, my 1st post here, so forgive me for possible imprecisions, ambiguity, inappropriateness....
When I search how to set/change the default app for opening some type of file I always find the answer "through the getinfo". But doing that, I only change the default application for the current user.
I want to do that for all users of my mac, without repeating the getinfo process for each of them.
Is there any adminstrative tools for doing that?
Thank you.

You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
http://www.rubicode.com/Software/RCDefaultApp/

Help with setting up application form to change per week.

Hi all, i am going to be creating a simple feedback system application on apex but from the requirements given to me I am somewhat uncertain of how to go about creating it.
The requirements are roughly:
A feedback system to capture thoughts and views of students each week.
An 'admin' area for the lecturer to define how many weeks the course is running for and whether there are 2/3/4 sessions each week for the duration.
The form in which the student will give feedback each week.
A results chart/graph/report in the 'admin' area, (with a printable PDF possibly?)
My question is, when the lecturer defines how many weeks the course is running for and how many sessions a week there is, is there any way of setting the form page (the student uses to give feedback) to change for each week i.e week1, week2 etc. So the student doesn't keep supplying the feedback for week1 for example.
The number of sessions will simple enough to sort out im thinking, just create the page with the highest possible amount of sessions on, then if there is only 2 sessions a week, only 2 will be displayed to fill in and the others will be hidden. If this is possible?
Any ideas and thoughts are welcome. Please also mention any other ways of doing this if you have any!
Thanks in advance,
Ashleigh

Hello Ashleigh,
>
My question is, when the lecturer defines how many weeks the course is running for and how many sessions a week there is, is there any way of setting the form page (the student uses to give feedback) to change for each week i.e week1, week2 etc. So the student doesn't keep supplying the feedback for week1 for example.
>
The answer for the above question is YES, with the help of form based on APEX_COLLECTIONS and/or APEX_ITEM API.
Now the question is HOW. The answer to this question is for example the Timesheets Packaged Application which was provided by OTN a while ago(say before release of APEX 4.1) which was available here:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/packaged-apps-090453.html
The application provided a way to collect no. of hours a particular person has worked on particular timecode in a week.
The main page consisted of a form built on collection(which was built on page load) whose first column consisted of timecode drop-down and rest of the column headers consisted of days of the week and the columns consisted of textbox for entering no. of hours worked. In short it was type of matrix form.
Hope it helps!
Regards,
Kiran

Setting default application

when I'm trying to open up a document or something it says something like "There is no default application specified to open the document (name of document)" . How do you set a default application and what should I set it to?
I have an iMac version 10.4.8

Tell me some of the names of these programs. What are the 3 letter suffixes (after the .)?
Examples: .sit opens with Stuffit Expander, .xls = Excel, .mov = Quicktime Player etc.
Most games run by themselves after you've installed them
Are these Mac games you've downloaded? Files ending .exe are Windows programs & require Windows XP SP2 to be installed through Bootcamp.
Steve

Setting up application aprovers in AE 5.2

Similar Messages

Maybe you are looking for