Setting VMware vCenter Computing Resources from command line

Does anyone know how to set VMware vCenter Computing Resources from the command line? vda pool-setprops doesn't seem to include an option for it. Thanks.

This document was posted in Aug 23, 2012. It covers Mountain Lion but Lion server may be similar.
http://support.apple.com/kb/HT5359
OS X Server (Mountain Lion)-based servers that need to run high performance services can use the command line utility serverinfo to dedicate systems resources.
serverinfo --perfmode
Gets the current mode
serverinfo --setperfmode 1
Sets the high performance mode
serverinfo --setperfmode 0
Disables the high performance mode.
Note: Transitioning to or from high performance mode requires a restart.

Similar Messages

Why not all jars picked up by ojdeloy and how to generate build.xml from command line and not JDEV GUI - quick question

Hi All
We have 11.1.1.7 ojdeploy to compile our app.
We notice in the log that not all jars are used in classpath arguments when we explicitly set them up for compilation.
eg:
<path id="classpath">
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/jsp-el-api.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/oracle-el.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/a.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/b.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/c.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/d.jar"/>
</path>
Log Output -
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/bin/javac
[ora:ojdeploy] -g
[ora:ojdeploy] -Xlint:all
[ora:ojdeploy] -Xlint:-cast
[ora:ojdeploy] -Xlint:-empty
[ora:ojdeploy] -Xlint:-fallthrough
[ora:ojdeploy] -Xlint:-path
[ora:ojdeploy] -Xlint:-serial
[ora:ojdeploy] -Xlint:-unchecked
[ora:ojdeploy] -source 1.6
[ora:ojdeploy] -target 1.6
[ora:ojdeploy] -verbose
[ora:ojdeploy] -encoding Cp1252
[ora:ojdeploy] -classpath
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/resources.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/rt.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/jsse.jar:
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/a.jar"/>
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/c.jar"/>
1- Is it because it depends on how jpr or jws are configured ?
2- How can we automatically generate a build file of the application from command-line (as opposed to using Jdev IDE to click to generate a build.xml) ?

The first warning is happening because you're stating drivers for input devices without need. You haven't disabled hotplug so evdev gets used instead of kbd. This is normal, and you should change the driver line from kbd to evdev so that whatever options (if any) you've specified for the keyboard get parsed.
The second warning is about you not installing acpid.
The third I have no idea about, but look at the synaptics wiki. None of the (WW) are related to your video card.
And every card that has 2 or more output ports show up as "two cards". You also don't need to specify the pci port in xorg.conf. edit: this is the general case with laptops, might be different for desktops.
When I do lspci -v I get:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at d0f0 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dff00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0
Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
And it doesn't matter if it errs in trying to sli up with it self. That's just not a possibility.
Last edited by gog (2009-10-15 23:59:49)

Unable to build and run Javapetstore using Sun SDK from Command Line

Hi,
Here is a problem I?ve come across building and running JavaPetstore from Command Line using Ant.
It shows that Build is successful but there is an error message in very beginning:
?Unable to locate tools. jar. Expected to find it in C:\Program Files\Java\jre 1.5.0_11\lib\tools.jar?
But there is no such a file in jre-1.5.0_11 or previous versions.
The only place where the file with such name can be found is jdk\lib.
All attempts to run end up with:
? BUILD FAILED.
C:\<PETSTORE_HOME>\bp-project\command-line-ant-task.xml:77;unable to find javac compiler;com.sun.tools.javac.Main is not on the class path.
Perhaps JAVA_HOME does not point to JDK."
Directories C:\Sun\SDK\bin and C:\Sun\SDK\jdk are in the PATH.
JAVA_HOME as a System variable is set up to C:\Sun\SDK\jdk.
Building and running other applications like a BluePrints or Samples bring to same result.
I will post more information if needed.
Thank you in advance for help.

If you are using Windows XP:
1. Right click on my computer
2. Select Properties from the popup dialog
3. Click on the "Advanced" tab
4. Click the button towards the bottom that says "Environment Variables"
5. In the dialog that pops up, look in both the User variables and the System variables for a variable named CLASSPATH
6. If its not there, you need to create it. If you want to make it available to all users of your computer, create it as a System variable. If you only want it to be available to the current user, add it as a User variable.
7. If it is there, or if you just created it, it needs to contain the following values: the current directory (symbolically abbreviated as a period: "."), any class libraries you want to be available to the java compiler (javac) or the java interpreter (java). By default, jre/lib and jre/lib/ext are searched for classes, so you don't need to include anything located in one of these folders on the classpath.

Error while running ADF-BC Test Suite from command line

Hi,
I have created a separate test project containing the Test Suite for the Model componenet of my ADF-BC application.
I need to run this test project separately from jmeter.
The tests run fine from Jdev, But when I package the test project into a jar and try to run from command line, I get the following error:
java.lang.NoClassDefFoundError: oracle/jbo/ApplicationModule
        at com.oracle.cs.cap.module.applicationModule.ServiceAMFixture.<init>(ServiceAMFixture.java:36)
        at com.oracle.cs.cap.module.applicationModule.ServiceAMFixture.<clinit>(ServiceAMFixture.java:15)
        at com.oracle.cs.cap.module.view.EntitlementReportDurationViewVO.EntitlementReportDurationViewVOTest.<init>(EntitlementReportDurationViewVOTest.java:11)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
        at java.lang.reflect.Constructor.newInstance(Unknown Source)
        at org.junit.internal.runners.JUnit4ClassRunner.createTest(JUnit4ClassRunner.java:72)
        at org.junit.internal.runners.JUnit4ClassRunner.invokeTestMethod(JUnit4ClassRunner.java:79)
        at org.junit.internal.runners.JUnit4ClassRunner.runMethods(JUnit4ClassRunner.java:51)
        at org.junit.internal.runners.JUnit4ClassRunner$1.run(JUnit4ClassRunner.java:44)
        at org.junit.internal.runners.ClassRoadie.runUnprotected(ClassRoadie.java:27)
        at org.junit.internal.runners.ClassRoadie.runProtected(ClassRoadie.java:37)
        at org.junit.internal.runners.JUnit4ClassRunner.run(JUnit4ClassRunner.java:42)
        at org.junit.internal.runners.CompositeRunner.runChildren(CompositeRunner.java:33)
        at org.junit.runners.Suite.access$000(Suite.java:26)
        at org.junit.runners.Suite$1.run(Suite.java:93)
        at org.junit.internal.runners.ClassRoadie.runUnprotected(ClassRoadie.java:27)
        at org.junit.internal.runners.ClassRoadie.runProtected(ClassRoadie.java:37)
        at org.junit.runners.Suite.run(Suite.java:91)
        at org.junit.internal.runners.CompositeRunner.runChildren(CompositeRunner.java:33)
        at org.junit.internal.runners.CompositeRunner.run(CompositeRunner.java:28)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:130)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:109)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:100)
        at org.junit.runner.JUnitCore.runMain(JUnitCore.java:81)
        at org.junit.runner.JUnitCore.main(JUnitCore.java:44)
Caused by: java.lang.ClassNotFoundException: oracle.jbo.ApplicationModule
        at java.net.URLClassLoader$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        ... 27 more
The Test project jar is created as ADF Library JAR File with Model.jpr as the dependent project. This takes care of project class dependencies
All the adf library dependencies are added to the manifest file of the Test Project jar referring to a location lib/ in the jar file directory.
I tried creating the ApplicationModule using both Configuration class (Configuration.createRootApplicationModule) as well as using the JDBC Connection String but both fail when I run the test cases independently from jmeter.
Anybody came across such an error? Please help.
Thanks,
Sapna

Hi Timo,
Im using JDev version 11.1.1.6.0.
I checked the class path on the jdev console. All the library references are mentioned in the manifest.mf classpath of the test project like below:
Manifest-Version: 1.0
Class-Path: lib/identitystore.jar
lib/adfm.jar
lib/groovy-all-1.6.3.jar
lib/adftransactionsdt.jar
lib/adf-dt-at-rt.jar
lib/adfdt_common.jar
lib/adflibrary.jar
lib/xmlparserv2.jar
lib/db-ca.jar
lib/jdev-cm.jar
lib/ojmisc.jar
lib/commons-el.jar
lib/jsp-el-api.jar
etc...
So I expect the library references should be resolved looking at the manifest file.
Another set of entries that I see in the jdev classpath are related to the Model project which is under test.
-classpath
D:\CurrentProject_1\16_7_2013_3pm\11_7_2013\.adf;
D:\CurrentProject_1\16_7_2013_3pm\11_7_2013\Model\classes;
How do I put these entries into my class path? Will it be sufficient if I add the Model.jar into my test project classpath?
Thanks,
Sapna

How to restore or backup Apex application from Command line ? URGENT

We have Oracle apex 4.1 installed in Oracle 11g R2 database (windows 64-bit) 2008 R2
For some reason our database dictionary objects are corrupted.
We wanted to backup our Apex applications in some workspaces ASAP.
We are not able to access apex from http://localhost:7777/pls/apex/htmldb_login
We have an underlying database schema export (expdp).
1) Is there a way to export or backup the apex application without logging into the apex URL ? if yes how ?
2) Does Oracle has any of its own native tool to backup and restore from command line ?
Thanks in advance

My (MS Windows) experience, if I may; perhaps you'll find something useful.
You'll find the README.TXT file in /apex/utilities directory. Read it.
In order to use APEXExport, you need JDK version 1.5 or higher. Check your version by typing (and viewing the result):
C:\>java –version
java version "1.6.0_06"
Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
Java HotSpot(TM) Client VM (build 10.0-b22, mixed mode, sharing)Its directory should be part of the PATH environment variable: on my computer, directory name isC:\Program Files\Java\jre1.6.0_06\binFurthermore, Oracle JDBC class libraries must be part of the CLASSPATH environment variable. Check whether it exists (in Control Panel - System - Advanced - Environment Variables). For my 10gXE, it is here:C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jarI couldn't make it work; didn't know that ".\" directory must be entered into CLASSPATH as well (found that information in Arie Geller's book). Therefore, my final CLASSPATH version is:.\;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jarOK, setup is done. Now, go to your /apex/utilities directory and, from the command prompt, run (mind the upper case!)java oracle.apex.APEXExportwhich will show a short help.
I chose to export the whole workspace. In order to do that, I need the workspace ID (got it from Apex's SQL Workshop; that might be a problem as you can't get there, can you? I can't tell how to find that information apart from SQL Workshop, but I'm pretty sure someone, who is much more experienced than me, will know it). OK, here's how you find it:select v('WORKSPACE_ID') from dual;Finally, here's the final step - export:C:\apex\utilities>java oracle.apex.APEXExport -db localhost:1521:xe -user scott -password tiger -workspaceid 1038408092496568The result are fxxx.sql files (where "xxx" represents application number).
I hope you'll manage to export your applications; basically, nothing special here (except that ".\" directory in the CLASSPATH variable).
Best of luck!

Query runs from command line, but not from scheduler

We use Control-M to schedule shell scripts to be run on a Solaris server. Some of the scripts have to access an Oracle database and in that case our security team will include the DB user and password in the script, then encrypt it and the sys admin team schedules the encrypted shell script with Control-M. That works fine, but we've been trying to have the DB user and password on a separate encrypted file so that we don't have to ask for file encryption every time it's necessary to modify a script (this is a test environment).
We have the script at ~/system_name/scripts, the query at ~/system_name/sql and the encrypted file and key at ~/system_name/keys. The SQLPlus call in the script is:
${ORACLE_HOME}/bin/sqlplus "`decrypt -a 3des -k ./../keys/key.3des.system -i ./../keys/login.system`"@instance_name <<EOF
@${DIR_SQL}/TEST_QUERY.SQL
quit
EOF
The security analyst has tested is successfully from command line, but when we schedule it with Control-M the job abends and we get the following in the sysout:
+ decrypt -a 3des -k ./../keys/key.3des.system -i ./../keys/login.system
decrypt: cannot open ./../keys/key.3des.system
decrypt: invalid key.
+ /u00/app/oracle/product/11.1.0/db_1/bin/sqlplus @instance_name
+ 0<<
@/sistemas/hmp/system_name/sql/TEST_QUERY.SQL
quit
SQL*Plus: Release 11.1.0.6.0 - Production on Mon May 3 09:41:55 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
SP2-0310: unable to open file "instance_name.sql"
Enter user-name: SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER|SYSASM}]
where <logon> ::= <username>[<password>][@<connect_identifier>] [edition=valu\
e] | /
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER|SYSASM}]
where <logon> ::= <username>[<password>][@<connect_identifier>] [edition=valu\
e] | /
Enter password:
ERROR:
ORA-12545: Connect failed because target host or object does not exist
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
0000000080
Any ideas?

Looks like the command is being split in some way - the connection to sqlplus is being made before it completes the whole string
It appears to be seeing the @instance_name as a script to execute rather than a db to connect to.
Is the database on the same server as the script?
If so, try setting your environment to the correct databsae, so that you can omit the @instance_name part of the syntax and see if it helps
Also just noticed the failure to open the decrypt script. It would appear uyou are not using a full path name. Have you checked which directroy the scheduled job starts in? You may need to look at running some environment specific scripts first.
Edited by: LindaA on 05-May-2010 07:43

How to run an executable from command-line

I'm learning how to use the Terminal and I got stuck in a silly thing (I suppose it is). How can I run an executable file from command-line in Terminal?
For example: I have a file named "Hello" in the folder /sample. If I use the ls command (ls sample), I can see the file Hello. Then I move to the directory (cd /sample) and try to run the file Hello (typing "Hello") but I got "command not found" message.
If I drag the Hello file from Finder to Terminal and hit Return, it runs perfectly. And if I type the full path to the file (even if I'm already inside its directory), it also runs.
So, my doubt is if there is any command to run an executable from command-line.
Thanks

KJK555 wrote:
Hi VK:
Can you enlighten me on why it's neccessary to do the "./" thingy in OS X when in unix/linux
I never had to resort to doing that?
Kj
I took the trouble of reading *man bash* and it explains the issue. to add the current directory to PATH you need to add an empty path to PATH like this
PATH=$PATH::
you can add it to ~/.bash_profile so that it's executed automatically when you start bash. I suspect the linux system you are talking about had this set up by default or had it added to PATH in /etc/profile which defines PATH globally.

Grant and revoke privilages from command line interface

hi all,
I have a lot of users that I need to give them a set of privileges to folders and containers of the repository, i thought that using the command line interface should help in loading a script.
i checked the manual for the syntax for such a command (i.e. to grant privileges) but i couldn't, searched the net and i didn't find anything.
So can we grant privileges from the command line interface and how ?
by the way is there anyway to create users from command line interface as well ?\
thanks in advance and have a good one

The granting of access rights cannot be done with a CLI script in Designer. Instead you have to use the Designer API Pl/Sql packages.
For detailed information, refer to the "API and Model Reference Guide", which is
installed with the Designer Repository Documentation, or can be found on OTN > Doco > Designer site.
Scroll through that document to the Reference section. You will need to read up on two topics at least: Workarea and Container Context, Privileges and Access Rights.
To grant rights, the easiest way is to grant them "just like some existing ones".
To do this, you'll need a Pl/Sql procedure with 5 input parameters:
1) the workarea context
2) the container to look at
3) the user to look like
4) the container to grant access to
5) the user to grant access for
The Pl/Sql procedure then needs to make a series of Repository API package calls to set context and get container IRIDs:
JR_CONTEXT.Set_Workarea (workareaname) - to set the context workarea
JR_CONTEXT.Set_Working_Folder (sourcefoldername) - to specify the source container
JR_CONTEXT.Working_Folder (sourcefolderid) - to get the ID of the source container
JR_CONTEXT.Set_Working_Folder (targetfoldername) - to specify the target container
JR_CONTEXT.Working_Folder (targetfolderid) - to get the ID of the target container
OR you can just do a couple queries after you set the WA CONTEXT such as ...
Select IRID from CI_Application_Systems where NAME = <sourcefoldername>
Select IRID from CI_Application_Systems where NAME = <targetfoldername>
Then you get the list of rights desired, and grant them back to the target user.
JR_ACC_RIGHTS.Get_Acc_Rights (sourcefolderid, sourceusername) > AccessList
[gets list of existing rights for some user on a container]
JR_ACC_RIGHTS.Grant_Priv_List (targetfolderid, targetusername, AccessList, Cascade? = TRUE)
[to set the list of rights for a user against the target container and its subcontainers]
There are other ACC_RIGHTS packages, like Grant_Priv, Revoke_Prive, Revoke_Priv_List, etc that you can use as well to build up a set of access management scripts.
Hope this helps

Windows 7 Defrag from command line does not work

We are running Windows 7 in a virtualized environment. When running windows defrag using schedule or from command line, it does not work. The command that I am executing as administrator is
C:\Windows\system32>defrag /c
Microsoft Disk Defragmenter
Copyright (c) 2007 Microsoft Corp.
It displays the above message and exits back to the command prompt. However if I run the command defrag C: it does work. Defragmenting from the GUI works as well as long as both the disks (C: and System Reserved) are selected and when I click on
Defragment disks, works fine.
I am concerned about defrag running from the task scheduler with the command "defrag /c" (auto scheduled using Configure Schedule... from Disk Defragmenter) does not work and the system never gets defragmented automatically.
This happens only with some of the windows 7 VM's that we have.
There are no entries in Event Log that point to the defrag (using task scheduler). Any ideas what may be going on?

Hi,
Could you defrag as below method:
1. Open Disk Defragmenter by clicking the Start button. In the search box, type
Disk Defragmenter, and then, in the list of results, click
Disk Defragmenter.
2.Under Current status, select the disk you want to defragment.
3.To determine if the disk needs to be defragmented or not, click Analyze disk. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Once Windows is finished analyzing the disk, you can check the percentage of fragmentation on the disk in the
Last Run column. If the number is above 10%, you should defragment the disk.
4.Click Defragment disk. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
For more information, please read this article:
Ways to improve your computer's performance
http://windows.microsoft.com/en-in/windows/improve-performance-defragmenting-hard-disk#1TC=windows-7
Meanwhile, read this article:
Defrag from the Command-Line for More Complete
Control
http://technet.microsoft.com/en-us/magazine/ff458356.aspx
Karen Hu
TechNet Community Support

Run test case from command line

Hi All,
Working environment : VS 2013 professional
Project type : Unit test project for (Windows 8.1 and Windows phone 8.1)
I have a set of unit test cases and want to run it on command line.I tried MSTest.ext and vstest.console.exe for running test case but not succeed.
command :  MSTest.exe /testcontainer:path of project dll
command :  vstest.console.exe path of project dll
Type of Error
Error : Unit test case for windows store and windows phone app can't be run outside appcontainer.
Error : No tests to execute
command :  MSTest.exe /testcontainer:path of appx
command :  vstest.console.exe path of appx
Error : root certificate error
I just want to run windows 8.1 and windows phone 8.1 run test cases from command line.
Thanks in advance.

Hi vicky2468,
Based on your issue, as far as I know that if we want to run unit test for windows store and windows phone app using mstest.exe or vstest.console.exe in command line, you will need to execute the .appx instead of the dll in command line.
In addition, I tried to run the appx for unit test in command line,
but I found that I also get the same issue as yours. I could not execute the appx for unit test in command line successfully. But if we run it with VS IDE in Test
Explorer windows, it seems that it works fine.
So I suggest you can submit a feedback for this issue, to get the issue confirmed and diagnose by product team, would you please create connect report for it? You will get email notification for update.
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx
When you submit the connect, I suggest you can provide your project for product team so that product team will
be better help you solve this issue.
If you submit it, please share me the link here, I will help you vote it. I think we could get the latest information
from the product team experts. Of course, if I get any latest useful information, I will update it here.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

CMake behaves differently from within PKGBUILD and from command line

Hi,
I am currently struggling with an issue which I cannot find a solution. The problem is, I am trying to create a PKGBUILD for the CasADi code. The following is the PKGBUILD file written. My problem is the cmake configuration part. When the code is configured from the command line, without PKGBUILD, camke detects the -fopenmp flag for C and C++ compilers. For exactly the same compilers, cmake detects openmp for C compiler but fails to do so for the C++ compiler, when configuration is done from within the PKGBUILD file using makepkg.
My question is, why different behaviors? Any suggestions on what is wrong?
pkgname=casadi-git
pkgver=0
pkgrel=1
pkgdesc="A symbolic framework for automatic differentiation and numeric optimization"
arch=('i686' 'x86_64')
url=""
license=('GPL')
groups=()
depends=('sundials' 'ipopt' 'blas' 'lapack' 'python2')
makedepends=('cmake' 'swig')
checkdepends=()
optdepends=()
provides=('casadi')
conflicts=()
replaces=()
backup=()
options=()
install=
changelog=
source=('casadi::git+https://github.com/casadi/casadi.git')
md5sums='SKIP'
build() {
cd "$srcdir/casadi"
sed -i 's/PythonLibs/PythonLibs 2.7/g' ./cmake_modules/FindNUMPY.cmake ./swig/CMakeLists.txt
cmake . -DCMAKE_INSTALL_PREFIX=/usr \
-DPYTHON_EXECUTABLE=/usr/bin/python2 \
-DWITH_DL:BOOL=ON \
-DWITH_LLVM:BOOL=OFF \
-DWITH_PYTHON_INTERRUPTS:BOOL=ON \
-DWITH_OPENMP:BOOL=ON \
-DWITH_OOQP:BOOL=ON \
-DWITH_DOC:BOOL=ON \
-DWITH_OPENCL:BOOL=OFF
make
package() {
cd "$srcdir/casadi"
make DESTDIR="$pkgdir/" install
Output when cmake is run from command line
-- The C compiler identification is GNU 4.8.1
-- The CXX compiler identification is GNU 4.8.1
-- Check for working C compiler: /usr/bin/colorgcc
-- Check for working C compiler: /usr/bin/colorgcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- The Fortran compiler identification is GNU
-- Check for working Fortran compiler: /usr/bin/gfortran
-- Check for working Fortran compiler: /usr/bin/gfortran -- works
-- Detecting Fortran compiler ABI info
-- Detecting Fortran compiler ABI info - done
-- Checking whether /usr/bin/gfortran supports Fortran 90
-- Checking whether /usr/bin/gfortran supports Fortran 90 -- yes
-- Flag needed for enabling C++11 features: -std=gnu++11
-- x86_64 architecture detected - setting flag -fPIC
-- Try OpenMP C flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Success
-- Try OpenMP CXX flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Success
-- Found OpenMP: -fopenmp
-- Looking for Fortran sgemm
-- Looking for Fortran sgemm - found
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - found
-- Found Threads: TRUE
-- Found LibXml2: /usr/lib64/libxml2.so (found version "2.9.1")
-- A library with BLAS API found.
-- Looking for Fortran cheev
-- Looking for Fortran cheev - found
-- A library with LAPACK API found.
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.28")
-- checking for one of the modules 'ipopt'
-- Detected an IPOPT configuration without development headers. Build will proceed, but without callback functionality. To enable it, see https://github.com/casadi/casadi/wiki/enableIpoptCallback
-- Detected an IPOPT configuration without sIPOPT headers. Build will proceed, but without sIPOPT functionality.
-- Found IPOPT: ipopt;lapack;blas;m;dl;coinmumps;pthread;blas;gfortran;m;gcc_s;quadmath;coinmetis
-- Could not find KNITRO include dir
-- Could not find KNITRO library
-- Could not find CPLEX include dir
-- Could not find CPLEX libraries
-- Could not find MA57
-- MA57 libraries not found. Falling back to MA27
-- Could not find MA27
-- Could not find OOQP include dir
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Found SWIG: /usr/bin/swig (found version "2.0.10")
-- Found PythonLibs: /usr/lib64/libpython2.7.so (found suitable version "2.7.5", minimum required is "2.7")
-- Python executable is /home/hamid/bin/python
-- numpy.get_include() is /usr/lib/python2.7/site-packages/numpy/core/include
-- Numpy path found: /usr/include/python2.7/numpy
-- Python libs: /usr/lib64/libpython2.7.so
-- Numpy includes: /usr/include/python2.7/numpy;/usr/include
-- Numpy libs: /usr/lib64/python2.7/site-packages/numpy/core/multiarray.so
-- Found PythonInterp: /home/hamid/bin/python (found version "2.7.5")
-- Found Doxygen: /usr/bin/doxygen (found version "1.8.4")
-- Found DOXYFILE_IN: /usr/src/AUR/build/casadi/src/casadi/documentation/api-doc/Doxyfile.in
-- pyreport not found -- try 'easy_install pyreport'
-- The following features have been enabled:
* dynamic-loading , Compile with support for dynamic loading of generated functions (needed for ExternalFunction)
* using-c++11 , Using C++11 features (improves efficiency and is required for some examples).
* sundials-interface , Interface to the ODE/DAE integrator suite SUNDIALS.
* csparse-interface , Interface to the sparse direct linear solver CSparse.
* lapack-interface , Interface to LAPACK.
* ipopt-interface , Interface to the NLP solver Ipopt.
* qpoases-interface , Interface to the active-set QP solver qpOASES.
* dsdp-interface , Interface to the interior point SDP solver DSDP (requires BLAS and LAPACK).
-- The following OPTIONAL packages have been found:
* OpenMP
* LibXml2
* BLAS
* Threads
* LAPACK
* PkgConfig
* IPOPT
* SWIG
* NUMPY
* PythonInterp
* Doxygen
-- The following features have been disabled:
* just-in-time , Just-in-time compiliation via the LLVM compiler framework.
* opencl-support , Enable just-in-time compiliation to CPUs and GPUs with OpenCL.
* get-ipopt , Download and build Ipopt.
* knitro-interface , Interface to the NLP solver KNITRO.
* cplex-interface , Interface to the QP solver CPLEX.
* ooqp-interface , Interface to the QP solver OOQP (requires BLAS).
* worhp-inteface , Interface to the NLP solver Worhp (requires LibXml2 headers).
-- The following OPTIONAL packages have not been found:
* KNITRO
* CPLEX
* MA57
* MA27
* OOQP
* MATLAB
* OCTAVE
* LATEX
* PYREPORT
-- Configuring done
-- Generating done
Output when running makepkg
-- The C compiler identification is GNU 4.8.1
-- The CXX compiler identification is GNU 4.8.1
-- Check for working C compiler: /usr/bin/colorgcc
-- Check for working C compiler: /usr/bin/colorgcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- The Fortran compiler identification is GNU
-- Check for working Fortran compiler: /usr/bin/gfortran
-- Check for working Fortran compiler: /usr/bin/gfortran -- works
-- Detecting Fortran compiler ABI info
-- Detecting Fortran compiler ABI info - done
-- Checking whether /usr/bin/gfortran supports Fortran 90
-- Checking whether /usr/bin/gfortran supports Fortran 90 -- yes
-- Flag needed for enabling C++11 features: -std=gnu++11
-- x86_64 architecture detected - setting flag -fPIC
-- Try OpenMP C flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Success
-- Try OpenMP CXX flag = [-fopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [/openmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-Qopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-openmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [ ]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-xopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [+Oopenmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-qsmp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Try OpenMP CXX flag = [-mp]
-- Performing Test OpenMP_FLAG_DETECTED
-- Performing Test OpenMP_FLAG_DETECTED - Failed
-- Could NOT find OpenMP (missing: OpenMP_CXX_FLAGS)
-- Looking for Fortran sgemm
-- Looking for Fortran sgemm - found
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE
-- Found LibXml2: /usr/lib64/libxml2.so (found version "2.9.1")
-- A library with BLAS API found.
-- Looking for Fortran cheev
-- Looking for Fortran cheev - found
-- A library with LAPACK API found.
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.28")
-- checking for one of the modules 'ipopt'
-- Detected an IPOPT configuration without development headers. Build will proceed, but without callback functionality. To enable it, see https://github.com/casadi/casadi/wiki/enableIpoptCallback
-- Detected an IPOPT configuration without sIPOPT headers. Build will proceed, but without sIPOPT functionality.
-- Found IPOPT: ipopt;lapack;blas;m;dl;coinmumps;pthread;blas;gfortran;m;gcc_s;quadmath;coinmetis
-- Could not find KNITRO include dir
-- Could not find KNITRO library
-- Could not find CPLEX include dir
-- Could not find CPLEX libraries
-- Could not find MA57
-- MA57 libraries not found. Falling back to MA27
-- Could not find MA27
-- Could not find OOQP include dir
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;-lpthread;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Could not find SNOPT include dir
-- Found Snopt libs: /usr/lib64/libf2c.a;-lpthread;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
-- Could not find MATLAB include dir
-- Could not find Matlab libs
-- Found SWIG: /usr/bin/swig (found version "2.0.10")
-- Found PythonLibs: /usr/lib64/libpython2.7.so (found suitable version "2.7.5", minimum required is "2.7")
-- Python executable is /usr/bin/python2
-- numpy.get_include() is /usr/lib/python2.7/site-packages/numpy/core/include
-- Numpy path found: /usr/include/python2.7/numpy
-- Python libs: /usr/lib64/libpython2.7.so
-- Numpy includes: /usr/include/python2.7/numpy;/usr/include
-- Numpy libs: /usr/lib64/python2.7/site-packages/numpy/core/multiarray.so
-- Found PythonInterp: /usr/bin/python2 (found version "2.7.5")
-- Found Doxygen: /usr/bin/doxygen (found version "1.8.4")
-- Found DOXYFILE_IN: /usr/src/AUR/build/casadi/src/casadi/documentation/api-doc/Doxyfile.in
-- pyreport not found -- try 'easy_install pyreport'
-- The following features have been enabled:
* dynamic-loading , Compile with support for dynamic loading of generated functions (needed for ExternalFunction)
* using-c++11 , Using C++11 features (improves efficiency and is required for some examples).
* sundials-interface , Interface to the ODE/DAE integrator suite SUNDIALS.
* csparse-interface , Interface to the sparse direct linear solver CSparse.
* lapack-interface , Interface to LAPACK.
* ipopt-interface , Interface to the NLP solver Ipopt.
* qpoases-interface , Interface to the active-set QP solver qpOASES.
* dsdp-interface , Interface to the interior point SDP solver DSDP (requires BLAS and LAPACK).
-- The following OPTIONAL packages have been found:
* LibXml2
* BLAS
* Threads
* LAPACK
* PkgConfig
* IPOPT
* SWIG
* NUMPY
* PythonInterp
* Doxygen
-- The following features have been disabled:
* just-in-time , Just-in-time compiliation via the LLVM compiler framework.
* opencl-support , Enable just-in-time compiliation to CPUs and GPUs with OpenCL.
* get-ipopt , Download and build Ipopt.
* knitro-interface , Interface to the NLP solver KNITRO.
* cplex-interface , Interface to the QP solver CPLEX.
* ooqp-interface , Interface to the QP solver OOQP (requires BLAS).
* worhp-inteface , Interface to the NLP solver Worhp (requires LibXml2 headers).
-- The following OPTIONAL packages have not been found:
* OpenMP
* KNITRO
* CPLEX
* MA57
* MA27
* OOQP
* MATLAB
* OCTAVE
* LATEX
* PYREPORT
-- Configuring done
-- Generating done

With a little creativity, you can actually do all that from the command line with a single command. It'll look a little crazy, but it can be done.
Whether the script exists on the local machine or not has zero to do with platform indpendence. You assumedly have to get the application onto the local machine, so including the script is not really an issue at all. However, you're talking about system independence, yet still wishing to run command line arguments? The two are mutually exclusive.

RefreshKrb5Config=true from command line JVM argument

Can we set refreshKrb5Config=true from command line JVM argu,ent like we set java.security.krb5.conf using -D option ? We are not using jass config file.

doubled the amount of code!If the code size is measured in the number of lines. More subtle size measurements are also conceivable.
Once in the past we got a new boss who introduced an exact measurement for the programmers' efficiency based on the statistics taken from the cvs (Concurrent Versioning System) repository.
Soon the colleagues began to comment out whole code blocks and reintroduce them instead of simply modifying them. Thus the number of the code lines changed by them skyrocketed.
There was a nice guy there. During his studies, he used to be the system & network administrator at a hostel for students of the electrical engineering faculty at the technical university. We feel it must have been a nice job. We plain programmers used Linux as desktop OS, but he used Solaris: even good old Linux was not good enough for him. (Windows? Naturally out of question!) I put up a big fight with our chief until I persuaded him to allow the Exchange server's supporting the standard (non-proprietary) mailing protocols, so that we were able to use the mailing infrastructure from our Linux and his Solaris boxes albeit without the calendar functions.
Well, this guy was an expert for difficult technical questions, he engineered the site-wide single-sign-on system etc. When he perused a piece of code, he shrank it by eliminating obsolete methods, by refactoring parallel ones etc. His measured output was negative...

How to send report output to two detinations at a time from command line?

Hi ,
how to send my report to two detinations at a time from command line i.e FILE and Mail ?
i created batchfile in that i mentioned one line for file(DESTYPE=FILE) perpose and another line for mail perpose(DESTYPE=Mail).i don't want to mention to lines.
i want to send my report out put two destinations at a time insted of running two times.
thx in advance.....
raghu

hello,
did you try to use distribution for that ? check out the reports distribution facilities available in 6i.
regards,
the oracle reports team

Error while running a Discoverer Workbook with parameter from command line

I am trying to run a discoverer report from command line and export the results in xls on to my local machine. I could do it fine for a simple workbook, but if I add a parameter(madatory) to the workbook and run it from command line specifying the parameter value I wanted to run the report for, I do not get any results. Here is the command line I am using.
dis51usr.exe /connect user/password@database /apps_user /apps_responsibility "System Administrator" /eul EUL_US /open C:\Disco\Test.DIS /sheet Testsheet /parameter Period Jan-07 /export xls C:\Disco\X.xls /batch
Parameter value is entered in correct format(Jan-07).
When I removed /batch from this to see if I get any error, Discoverer Desktop opened up, logged in and gets terminated saying 'Oracle Discoverer Desktop has encountered a problem and need to close. We are sorry for the inconvenience.'
Did anybody come across this issue before?

Hello,
If you have a few minutes, Windows is also aborting for me:
the differences are, my situation is:
a) am running the command line from a .bat file
b) am NOT running with parms, want the discoverer query to come up for the user
c) am running a query from the database
i am signing in as myself BUT running a query that was created by a generic user called SREG
c) if i run the .bat file from Windows Explorer, the query opens fine
d) if i execute the .bat file from within Microsoft Access using the shell command,
the query opens and then aborts RIGHT BEFORE the parm screen would display
e) btw, if i modify the .bat file, to run a query from MY database signon, then (d) - running .bat file
from vb using SHELL command works
Do you have a ideas as to why (d) does not work? I would be very grateful for your time, tx, sandra
this is what i posted yesterday, tx: Re: Running Discoverer command line
tx, sandra

VPN Client disconnection from command line

Hi,
I want to connect to IPsec VPN on ISA500 by VPN Client (v 5.0.07.0440, the last version, I think), using command line parameters.
I can connect with the command:
"%programfiles%\Cisco Systems\VPN Client\ipsecdialer.exe" -c -user myUser -pwd myPassword "MyConnectionEntry"
but i don't know the command to disconnect from command lines.
If I do
"%programfiles%\Cisco Systems\VPN Client\ipsecdialer.exe" -?
I obtain the list of parameters
vpngui [-c | -sc [sd] [-user <username>] [-pwd <password> ! -eraseuserpwd]] <connection entry>
but I don't unterstand what I have to do... I try every combination using -sd parameter (I think means for silent disconnect), but in every case I can only to show VPN interface without disconnect anything...
Can anyone help me?
Thanks

Prasath,
This appears to be a data flow issue. You need to look in the dataflow log file. Your information indicates the project name is SAMPLES.xml, and the data flow ID is D20091213_014350765. Look at the data flow log file in
C:\dqxi\11_7\repository\configuration_rules\runtme_metadata\project_SAMPLES\D20091213_014350765
Alternatively, you can temporarily replace the transactional reader and writter transforms with their corresonding batch transforms, and run the job from the Project Architect. Any errors will be displayed in the Running window.
Paul

Setting VMware vCenter Computing Resources from command line

Similar Messages

Maybe you are looking for