Several Excite AT300 Issues

Hello all, I recently purchased an Excite AT300 (16GB) model and have experienced some issues so far.
1. The issue that I experienced today was the tablet kept powering down by itself. The battery was at about 26% and when I would power on the device, it would boot up, and power down almost immediately. At first I thought it would be some kind of power setting where if the battery falls below a certain % it will power down, so I checked the settings and there was nothing similar to that enabled. I proceeded to connect the tablet into the power supply and I no longer had this issue, because it was charging. This will become a great inconvenience if the device will power down at a certain battery %. 
2. The other problem I have been having is with the SD Card. I recently purchased an SD Card from Amazon (SanDisk) and tried it out on the tablet. The device recognizes the card, but I am unable to copy stuff to the card. At first I figured that maybe the card wasn't formatted, so I put it into my pc and formatted it (Fat 32). I tried again and still the same problem with the tablet. My pc reads/writes from the SD Card just fine, so now I'm thinking that maybe the card isn't compatible with the tablet. Is there a list of compatible SD Cards with the Excite AT300 (16GB)? I downloaded two programs from the droid market to try and help me troubleshoot, and so far here are my results:
SD Tools: App will not read/write to the card. It doesn't give me any read/write speeds and tells me that there was an error reading the card. Maybe the app isn't compatible with tablets.
Astro: When i click on the sd card, it tells me that no directory exists, and asks me if i would like to create one. When i click on yes, it tells me there was an error writing to the card. When i try to copy files to the card (using the tablet) it tells me that i do not have permissions (denied).
Has anybody else had these issues? 

I've been using an AT305-T32 for about a week now. I have not seen an issue like your spontaneous power-down. I did, however, get up one morning to find it showing the boot animation--indeed, my wife said it had been showing it for a long time. When I force-reset it and got it back booted the battery usage graph made it look like it had been stuck there for several hours. Go figure. I have not seen it before or since.
As to your second problem, I saw exactly this problem when trying an SD card in my wife's (then) new Galaxy Tab 7.0 Plus. After some research, I found that there was some design change in Android between Gingerbread (v. 2.3) and Honeycomb (v. 3.0) that changed how Android mounts removable memory like this. Don't recall all the details, but this is an Android thing. With some googling you can probably find the story I can't recall.
What I found then and just re-confirmed on the Excite is that the native File Manager (Samsung in that case or Toshiba in the case of the Excite) is somehow smart enough or secure enough or something to work with the SD memory. (Not sure why the file manager apps can't or won't work the same way.) I just used the Toshiba File Manager to copy a file both to and from the SD card.

Similar Messages

  • Severe audio sync issues with DVR and RAI(Italian) channel.

    Having severe audio sync issues with the Motorola QIP6416-2 while
    watching RAI(Italian) channel. The audio is about 2 seconds behind
    the video. This is the only channel it seems to happen with.
    I just switched from Cablevision about a week ago and never had a
    sync issue with their DVR with the same RAI channel or any channel.
    I've tried changing hdmi cables with no success and I also went to
    component video cables but the problem remains. Resetting the
    box helps but within 15 minutes the sync issues return. Also,
    a channel change and back helps briefly,
    The only new piece of equipment in the mix is the Motorola DVR,
    nothing else has changed.  The DVR is connected directly to my
    tv.
    Any help is greatly appreciated.
    Mike

    Being a foreign channel, there may be something screwy with the framerate (PAL conversion?). I don't personally subscribe to any foreign languages channels and I doubt too many on this forum do either, so you may have trouble finding someone to replicate the problem on their end here.

  • I am trying to print a booklet.  I have printed it several times without issue.  Now when I print, it gives me one blank page or else 2 out of my 8 pages?

    I am trying to print a booklet.  I have printed it several times with no issues.  Now when I try to print it (with no changes in the program) it will either give me a blank page or will print one of my pages (there are 8 pages total). Any help?

    No I didn't even read through your post, to long.
    You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
    Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
    Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is.

  • Why does FF18 (and not older releases) have new, severe font display issues in some contexts?

    When I upgraded to FF18 in Windows XP, all the sample pages (more than 200) in my portfolio site were effectively rendered unreadable in FF18 in XP. I also noticed the darker themes in Gmail had some of the same issues, though much less severe. I see none of these problems in FF18 on OS X using the latest version of the OS (Version 10.8: "Mountain Lion"). The issues seem to have no relationship to the fonts specified, although on one system, the bolder Arial in Gmail's top menubar looked much worse than unbolded Arial inside the inbox.
    I narrowed down the portfolio page issues to two main contributing factors:
    1. Translucent CSS opacity setting in a non-containing layer below the layer containing the text. To try being a bit more clear, the layer that actually contained the text and its background was NOT using any opacity settings. Think of the lightbox effect, if you've heard of that, to pop-up a page inside the existing browser window rather than in a new window, which typically uses a translucent overlay outside of the text area that reveals some of the background of the opening page.
    2. The text layer used white and other light-colored text on a dark background (#262626).
    Although I've I spent several days redesigning and reworking my pages to protect them from future potential rendering issues, I'd still like to know more about what's causing this. I've worked around somewhat similar issues in other browsers (mainly ie and chrome), but never so severe as these latest ones in FF18.
    I tried unchecking the hardware acceleration checkbox in Options, and tried reversing the gfx 'azure' and '2d' options in about:config. I also tried disabling all add-ons. However, none of this made any difference in either Gmail or my own pages.
    I can't realistically ask my potential clients to fiddle with all of these settings, so that is a major reason for asking. I could post a couple of screenshots of my Gmail inbox, although I don't see any place in this form for file uploads.

    Here're two screenshots showing the more severely unreadable rendering when a non-containing translucent layer is below the text layer (Item #1 in opening post).
    1: The first screenshot shows 13px Calibri (Windows system font) body text at #ffffff (white) foreground color body text over a #262626 (dark gray) background. The background color of the 0.5 opacity translucent layer (visible at top and left sides of screenshot) is #DFDBCD. The subheads are 18px #fff Calibri.
    2: The second screenshot shows 13px body text at #ffffff (white) foreground color body text using an open source font over a #262626 (dark gray) background. The background color of the 0.5 opacity translucent layer (visible at top and left sides of screenshot) is #DFDBCD. The subheads are 18px #fff using an open source font.

  • FW CS5 - Severe Color Sample Issue

    Howdy,
    I know there is another thread on color variations when using the color sampler but I am having a severe issue with sampling colors. No matter what I color sample the color it gives back is way off. An example would be purple comes back as a light gray. To better illustrate, I have created a quick video that shows how bad/frustrating it is.
    Here are my specs and what I have done so far...
    Specs
    MacBook Pro Retina (15")
    Mac OSX Mountain Lion  - 10.8.2
    Adobe Fireworks CS5 - 11.0.1.7 (11.2)
    What I have tried.
    Snap to web safe is NOT checked.
    Delete preferences (http://helpx.adobe.com/fireworks/kb/restore-preferences-fireworks-cs5.html)
    Re-install
    Still no luck. This doe not seem to be a common issue but I am wondering if this is an issue with CS5 and MacBook Pro Retina. Any thoughts on resolving?
    Any help greatly appreciated. : )

    Will they release an update to CS5 to address these issues? I'm not qualified to answer that, but the odds seem low. Nevertheless, you can report the issue(s) using Adobe's official bug report and feature request form:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    I like to include URLs to relevant forum posts in my bug reports, to provide additional information (like the video you've included) and reinforce that other users are also being affected, if applicable.
    You could also pipe up about it on the Adobe Fireworks Facebook page, but you won't likely receive a response.
    I wonder if there are any adjustments or accommodations that can be made at the computer- or OS-level that might help. (Something to do with the Retina aspect.) It's a long shot, but you might also try saving your Fireworks preferences and configuration files and then reinstalling Fireworks.

  • Several Phone Call Issues Since Upgrading My iPhone 5 to iOS8

    I have an iPhone 5 and I have upgraded to iOS8. Since I have upgraded, I am having severe issues with telephone calls. I used to be able to make a call, hit the hold button and place the phone in my pocket while walking and talking. I can no longer do this (I almost always use my headphones for calls as I can hear better with them versus not having them in for calls). Now if my phone's hold button is hit or it falls asleep, the call disconnects and the MP3 player/ipod feature begins to play.
    I have also had issues with calls simply vanishing seconds after I make them. No error message or anything, just vanishing and the MP3 player/iPod turning on.
    I have checked the forums/web and have found nothing on this. Has anyone else had any similar issues/any tips on how to make this stop? It's very frustrating.

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
    You will not lose data by resetting. If this does not work, set it up as new device, to rule out a software issue. Looks like the proximity sensor is not working as expected, as the music starts playing instead of the screen switching off while placing the phone next to your ear.

  • Several Hard Drive Issues

    Hello everyone!
    Nice to be back in the Mac Community! I have several old hard drives I am trying to dump the data from and reformat them but I am having issues with every single one. I am using a Vantec NexStar Universal Storage Adapter found here:
    http://www.vantecusa.com/en/product/view_detail/393
    It seems to work, so I don't believe the issue is the device.
    The hard Drives I am trying to access are:
    Western Digital Caviar 36400 - AT Compatible Intelligent Hard Drvie  - 6448.6 MB Hard Drive
    MDL : AC36400-00LC
    This drive is seen by Disk Utility and Test Disk via Terminal but I get an error when trying to format.
    All other drives I get a
    AppleUSBCDC: start - initDevice failed error
    in console when I connect via USB.
    These drives are:
    Hitachi Model DK23EA-40 40 GB 2.5" IDE Disk Drive
    Western Digital WD Caviar WD300 MDL: WD300BB-00AUA1 30 GB IDE Hard Drive
    IBM Model DTTA-351290 12GB 3.5 inch IDE ATA Hard Drive
    Samsung Model: HD501LJ 500GB Hard Drive
    All of these produce the AppleUSBCDC error. Any advice on how to make sure there is nothing on theses drives and getting them formatted to use?
    Thanks!

    That could very well be the possibility. Bad PCBs could be the issue, although again I would be suprised considering these are all drives of different ages. And since there really isnt any more damage than not being able to get files off them, I am happy to use them as learning experiences and do just about whatever it takes to try and recover them.
    I had the same experience with two different laptops, my sister's compaq and my macbook pro, both of which had the bad NVIDIA chipset. I baked my sister's compaq motherboard in the oven @ 375 for 7 min 45 secs and then pressed down on it with a towel while it cooled, reassembled and booted right up! So I figure what the hey! I'll see what I can do with these drives. So maybe swapping out the PCB board from a verified working drive?
    Tim

  • Several RMI (easy) issues

    Hi,
    Developping a small RMI application, I face the following issues:
    I can run several RMI servers on a machine (launched with 1 or more userId (root, guest, foo)) but how can RMI clients be notified of how many RMI servers have been launched (and their port number). How to specify the server we want to log in ? Is it possible to have from a client the list of all RMI servers running on a machine ?
    I would like that clients use login/passwd to connect the RMI server. In fact, If the client authentifies itself with root/passroot it automatically runs on the root RMI server launched. How can I do that ?
    Thanks.
    If it is not clear enought I will explain my problems differently.

    Here are my replies:
    1) the issue is that the server can execute system commands (kill ,renice, performance command...). So, I don't want, if a server has been started as root, that every body accessing this server can run a kill on a process. So every user would have to launch its own server and then only access to services it can perform normally when logging on this machine. Moreover the RMI server has to retrieve a lot of infomation in less than 1sec (do some sys calls and internally retrive the state of all processes running on the server machine) so I think is better do launch several servers.
    Note: the client MUST have a direct access to the server machine. It is a pre-requiered.
    2) Thanks.
    3) So the client can send the login/passwd info tho the server, which look in the unix account on the system, register the client with the good server and that accept the connection.
    A lot of messages talking aboiut RMI security gives some idea on how implmenting a secured connection between client/server but I cannot find any pseudo-code or code sample.
    Do you have sme pointers ?
    Thanks

  • ICP Excitation control issues

    We are having problems with ICP control after some initial tests on two NI-4472s trying to drive accelerometers have resulted the following behaviour:
    - ICP does not appear to work irrespective of input configuration - differential, reference single ended etc (when ICP is enabled we ensure AC Coupling, when ICP disabled we ensure DC Coupling)
    - However, when say chn 1 is configured for ICP, and chn 2 has its negative wire grounded then ICP functions. So there seems to be some input configuration setting issue to do with grounding.
    Any idea what might be wrong or things we might check/try?
    Note the following applies to NI-4472s:
    The board actually has 'Unbalanced Differential Inputs' which is basically differential mode with
    a bias resistor to ground on the negative input built-in. This means floating signals are generally preferred - which includes accelerometers as mentioned - and are already ground referenced internally. The board will also accept externally grounded sources but only if their ground potential is not more than 2.5V different to the 4472 ground (regardless of AC or DC coupling).
    Thanks,
    Chris

    Chris,
    What exacly happens when you say that ICP doesn't appear to work? Are you enabling excitation in the scan list after configuring the task? What functions are you using to program the board? You should be using AC coupling with excitation enabled. Take a lookat the following KB and the related link at the bottom of this document.
    How Do I Know the Integrated Circuit Piezoelectric Excitation For My 4472 is On?">
    Figure 2-3 on Page 2-7 of the NI 4472 User Manual shows how to connect floating and grounded signals to the NI 4472 input terminals. The negative lead of each input channel of the NI 4472 board is connected to the chassis ground of the boar
    d through a 50 ohms resistor. The chassis ground of the board is connected to the ground of the computer itself. If you have a grounded signal that is not referenced to the same ground than the NI 4472 board, you could create a ground loop that would introduce errors to your readings. I hope this resource helps.
    Shea C
    Applications
    NI

  • Severe bootcamp install issues

    After running boot camp services successfully for many years me real problems that have me stumped.
    currently running windows 8.1 on 2008 intel imac was running beautifully until the other day it started struggling to keep the time and date. after resetting it everytime the computer started a few times I tried repairing bootcamp. no help. So then tried uninstalling bootcamp. no help after reinstalling it  so i uninstalled bootcamp again and then cleaned the registry to hopefully clear any corruption. now bootcamp will not install correctly it gets stuck at appletimeserv with the error the package maybe damaged so e-downloaded bootcamp from apple with the same error. since then there are severe connection issues with the apple wireles mouse wireless keyboard and ati graphics. also even though bootcamp is uninstalled and no longer showing in add remove programs the bootcamp control panel is still there in the notification area and working??? feeling very frustrated and confused any help will be much appreciated  OS X mavericks/Windows 8.1 x64 iMac 2008 24"

    From Help in \Program Files\BootCamp
    Installing or repairing Boot Camp drivers
    You must install the Boot Camp drivers to use all the features of your Mac with Windows. If it appears that the Boot Camp drivers weren't successfully installed, try repairing them.
    To install or repair Boot Camp drivers:
    Insert the Mac OS X installation disc into your computer.
    Double-click the setup.exe file if the installer doesn't open automatically.
    If you are repairing Boot Camp drivers that are already installed, click Repair.
    Follow the onscreen instructions.
    If a message tells you that the software you are installing has not passed Windows Logo testing, click Continue Anyway.
    Periodically, Apple may provide updated Boot Camp drivers on the Boot Camp support site.
    Open
    Boot Camp support site http://www.apple.com/support/bootcamp/

  • Severe Network Password issues

    Hi all, this is my first post here.
    Of the four computers accessing our router, 3 of them work fine (2 PCs and 1 x Apple PowerBook on OS 10.3.9 over airport).
    The machine with the internet connection that no longer works well is my G5. I recently updated the airport software through software update--my thoughts are, does this contain firmware that may have interfered?:
    The curious thing is that after performing a clean install with the system discs (10.3.3) and when trying to connect to 'a specific network' as before, the airport sees the network name correctly, but when selected, internet connect now prompts for a WEP password, where it never used to--and it DOESN'T connect--returning an 'Error connecting to MyNetwork' message...
    This is the same WEP key as entered in to System Prefs > Network > 'a specific network' > Password--which used to be perfectly adequate.
    I am actually now booted from my external clone FW 800 drive, which was a backup from September when everything worked fine--and guess what--my clone network settings work absolutely fine and I can connect to the internet and sit here writing this post, no problem...
    So because of this I don't believe that it is a hardware issue.
    However, when performing a clean installation of 10.3.3 and choosing to 'transfer user network data' from a previous mac (in this instance my boot clone), everything clones perfectly EXCEPT the network password settings which refuse to connect to the internet and behave again, in the manner described above.
    I have run all sorts of disc tests, clean installs that transfer no data from anything previous whatsoever, with various updates applied, and yes, even copied my clone drive using superduper back onto the main system disc as an erase and install clone of my boot clone... to no avail.
    A small gllimmer of hope appeared briefly when having cleared the PRAM on startup, after a few more identical attempts at entering the password on a clean install (with NO data transferred from the boot clone on install), the airport DID make a connection. But only briefly, it gave up the connection after a short while and reverted to the error messages as before.
    What is frustrating is that surely if it was a Keychain issue, any keychain info would be zeroed from the clean install. The Airport can see the router, but wont connect without the correct password. I've tried addding $ signs in front of the password too, and like I say, it did connect once for about five minutes and then died again...
    And the really annoying thing is that it works fine when I boot up in the boot clone!!!
    Any ideas, help and suggestions will be really really appreciated.
    Many thanks,
    Stuart.

    The password you are being asked for is the Base Station password. The default is "public." If this was changed, you can perform a "soft" reset on the AX to get it back.

  • [Solved] Several installs and issues with DHCP issue every time.

    Edited: more concise information!
    Hi folks,
    I was using Arch fine for months but decided to reinstall it fresh at the new year, but since then I have been plagued by connection issues. I install Arch and follow many of the tips found in these Wikis to set it up how I like then install preload and readahead.
    Post-Installation Tips
    http://wiki.archlinux.org/index.php/Pos … ation_Tips
    - LCD filtered fonts
    - Disable IPv6 (I use Chorus/NTL and they have a tip for improving Firefox that disables IPv6, so I think that this is not to blame)
    Laptop
    http://wiki.archlinux.org/index.php/Laptop
    - Battery state monitoring utilities (acpi)
    - Laptop-mode-toold
    - Powernowd
    Maximising Performance
    http://wiki.archlinux.org/index.php/Max … erformance
    - Swapiness
    - Mount /tmp to RAM
    My internet connection works fine, even when rebooting, but later I turn on my computer and WICD or networkmanager fails on "obtaining IP address. I really think that there is something in one of these tips that is causing this problem, but I am at a loss as to what. Like I say, I was using it happily for many months before these current issues. The only thing I did differently was systematically set up my computer with all the tips detailed above, where as before, I collected these tips over a period of time and did not do them all straight after installation. I have tried rolling back the changes and this has not fixed the issue.
    I have had this issue over many reinstalls, using networkmanager or WICD and each time I was hoping that I was doing something wrong.  I have an Ubuntu and work Windows laptop that both work fine, so I don.t think it is anything to do with the connection itself.
    I am not sure what information you would need so I thought I would post both of these files. If you would like anything else, give me a shout and i can post it.
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_GB.UTF-8"
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/Dublin"
    KEYMAP="uk"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(acpi-cpufreq vboxdrv coretemp)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="laptop"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #Static IP example
    #eth0="dhcp"
    eth0="dhcp"
    INTERFACES=(eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(preload syslog-ng hal wicd @powernowd @laptop-mode @fam @alsa @sensors @readahead-list)
    /etc/resolv.conf
    # Generated by dhcpcd
    # /etc/resolv.conf.head can replace this line
    # /etc/resolv.conf.tail can replace this line
    Thanks for your help,
    Scott
    Last edited by ScottArch (2010-02-14 12:30:25)

    Hey Scott!
    I don't know if it is helpful in any way but I have a similar problem with my desktop PC.
    I have two ethernet controllers installed and somtimes I had a Ip address assigned and sometimes I didn't.
    One which is connected to the router and a 2nd one I use sporadically to connect additional computers.
    The dhcpcd would fail to load even if I followed steps suggested from other forum members.
    My temporary fix was to run:
    # dhcpcd
    manually.
    If this helps you might consider adding "dhcpcd" at the end of
    /etc/rc.d/network
    I know it's not really a fix but it helps me to get a working connection whoch otherwise would fail - or work if lucky but i don't like lucky with network/internet ^^

  • Severe DML Performance Issue using Oracle RLS on 11.2.0.3

    Hi Experts/Gurus,
    We are trying to implement Oracle RLS in one our Corporate Application
    Purpose of using RLS is to convert Single Company Application into Multiple Company Application
    by adding COMPANY_ID Column and Index to make Application Multi-Company.
    Each user would be allowed only to view/edit records from his own Company
    RLS function we defined is very simple and static.
    When we did some DML Tests using 8 parallel sessions, find DML Performance is
    severely degraded (response time is twice our existing Application without RLS)
    Top 5 Timed Foreground Events
    Event Waits Time(s) Avg wait (ms) % DB time Wait Class
    db file sequential read 1,312,910 6,197 5 43.08 User I/O DB CPU 2,976 20.69
    library cache: mutex X 80,808 1,139 14 7.91 Concurrency
    WCR: replay lock order 1,705 1,107 649 7.69 Application
    gc current grant 2-way 309,886 550 2 3.83 Cluster
    Would like to know why we encounter library cache: mutex X
    Checked Mutex Sleep Summary section of AWR and it has following:
    Mutex Sleep Summary
    ordered by number of sleeps desc
    Mutex Type Location Sleeps Wait Time (ms)
    Library Cache kglpin1 4 26,849 0
    Library Cache kglpnal2 91 25,230 0
    Library Cache kglpndl1 95 21,382 0
    Library Cache kglpnal1 90 12,823 0
    Cursor Pin kksfbc [KKSCHLFSP2] 5,196 0
    Would like to know how to interpret
    each of the Library Cache entries such as kglpin1 4.
    What does the keyword after Libary Cache (starting with kglpin mean)
    Thanks in advance

    Welcome to the forum!
    Please see the FAQ #3 at the top of the thread list for how to post a tuning request and the information you need to provide
    SQL and PL/SQL FAQ
    >
    We are trying to implement Oracle RLS in one our Corporate Application
    Purpose of using RLS is to convert Single Company Application into Multiple Company Application
    by adding COMPANY_ID Column and Index to make Application Multi-Company.
    Each user would be allowed only to view/edit records from his own Company
    RLS function we defined is very simple and static.
    When we did some DML Tests using 8 parallel sessions, find DML Performance is
    severely degraded (response time is twice our existing Application without RLS)
    What does the keyword after Libary Cache (starting with kglpin mean)
    >
    The short answer is that those are pinned objects in the library cache.
    The short question is why you are focusing on trivia instead of collecting, and posting, information that might shed some light on your problem?
    Read the FAQ thread above and post the information needed.
    Your RLS function may be 'very simple and static' but we can't see it. And we can't comment on what we can't see.
    We also can't see:
    1. your table or index DDL
    2. the query you are using that you say is non-performant
    3. any data about statistics and whether they are current
    4. any data about row counts for the table, the (unknown) query predicates, the expected result set
    5. any data about the query predicates
    6. any execution plans for the query from the standard table and from the current table
    7. any info about the RLS security you are using and how you implemented and configured it.

  • Several update related issues but one I can't fix ???

    Background: I'm on a PC with Windows XP. Got ATV 2-3yrs ago and use it on a WIRED network. Had the "need to open ports" issue and fixed it. All is good. VERY fast synch speeds and no problems. Love the ATV.....until...intalled latest iTunes update (9.??) 2 weeks ago. ATV no longer in device list. Hours of searching and rebooting and resetting and I finally find the answer is the latest Bonjour has a bug which causes this issue. Uninstalled and reverted to the previous Bonjour. ATV is back but in devices. Because all my content was wiped, have to resync. I only sync a small amount of data to the ATV...1900 songs. Usually takes less than 20 minutes. 36 hours later the end is nowhere in sight so I stop the sync. I made no changes to my network setup. I tested youtube and internet radio connectivity and they are fine. Quite fast actually. I reboot the ATV. No better. I reboot the computer with no improvement. I update the ATV to the latest version, still no luck. (Incidentally, I avoided the new ATV software due to a known issue with FLAC and WAIFF music files. Not sure if this has a fix yet). Factory settings restored and still no luck.
    Basically, what could possibly have changed to make a wired ATV unusable when it has been fine for so long? This one really has me stumped.

    hmmm... network seems to be ok.. tried all the restores, restart etc, etc.. could you have some corrupted files or a flakey drive that your files are sitting on?
    would be really good to see the actual transfer rates of files going to your appleTV and if some files are faster than others.
    i had a drive that failed on me but before it did completely it would hang on the corrupted files being transfered.. it would usually crash the appleTV or iTunes in the process.. and your's doesn't seem to be doing that, so maybe it's not the that.
    is it possible try to sync files from another drive and see how that goes? or transfer a few portions of what your trying to transfer now and see if you get the same problem (a few different portions so you would be trying to avoid portions with potentially corrupted files on it).. again just a stab in the dark.. you seem to have tried most of the things i would have..

  • Possible file recovery for Excite AT300

    Unfortunately my AT300 started freezing up during startup and I had to face the invetiable and do a factory reset after two years of usage. Unfortunately I didn't back up anything. My main concern was after resetting it was that I had lost text files of writings etc. I am wondering, however, is if it is even possible to recover anything after a factory reset? The only thing I could think of would be to attemp to connect the tablet to a laptop and try to use file recovery software if the laptop can even acknowledge the AT300. Has anyone attempted this?

    30 day trial, no money spent.
    So why would anyone buy this Keith, if they could get full use out of it for up to 30 days, when just 30 hours would probably do ? Excuse the rhetorical question.
    What is noticeable about the various file recovery programs is they let you sample them but mostly require payment if you want to seriously use them.
    It is remarkable in the software universe of freeware, and OpenSource ware, that software recovery are the exception and give no free lunches, or at least none that I know.
    *I suspect you will have to pay for this app to facilitate your file recovery*.
    I'm not sure which one, but there is one that lets you restore one file, just to prove itself, but to get the rest you have to buy the software. Can't remember which one that is but see if you can find it, at least to prove something is recoverable before you fork out the money.
    On the matter of creating a backup image using Disk Utility, did you do it according to these procedures?
    http://support.apple.com/kb/HT1553
    Still, if it has no mountable file system, I doubt if it can be created after the fact.
    Sorry to be unable to throw some sunshine on your problems, but gee you are gonna have a great backup strategy in place after this. ...a little ray there.
    P.S. You need to contact the providers of these software to clarify things - your expectations, payment, whatever.
    Message was edited by: roam

Maybe you are looking for