Shared enhancement point problem.

Hi Experts,
I am facing a complex problem:
(1) I have a requirement to make a specific enhancement for a specific transaction.
(2) In the primary program of the transaction I have placed all my custom subroutines.
(3) Now in one of the INCLUDE's of the program the above subroutines are being accessed.
The problem is that the INCLUDE discussed in point 3 is being shared by many other transactions. So when I am running the other transactions - they are giving me a dump saying that the SAP standard program is now syntactically incorrect. I think this is arising since the other transactions cannot find the custom subroutine that I had made in the main program discussed in point 1. Can anyone help me with the solution to this problem??

Hi Prabhu,
See the code below:
ENHANCEMENT-POINT create_fieldgroups_l_01 SPOTS es_miolvc20 INCLUDE BOUND.
$$-Start: CREATE_FIELDGROUPS_L_01----
$$
ENHANCEMENT 27 OIO_MIOLVC20.    "active version
        CASE h_fieldcat_wa-fieldname.
          when 'OIO_HOLD'.                              "SOGK004254 AN
            h_fieldcat_wa-sp_group = 'B'.               "SOGK004254 AN
            h_fieldcat_wa-just = 'C'.                   "SOGK004254 AN
            h_fieldcat_wa-seltext_s = 'H'.              "SOGK004254 AN
        ENDCASE.
ENDENHANCEMENT.
ENHANCEMENT 28 Z_CUSTOM_WO.    "active version
IF sy-tcode = 'IW37'.
PERFORM zinitstat.
ENDIF.
ENDENHANCEMENT.
Require a solutions ASAP. Thanks in advance.
Edited by: Aditya Niyogi on Aug 22, 2008 12:40 PM

Similar Messages

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

User Exit/BADI/Enhancement Point in VF01 before new document no assignment

Hi Expert,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment. Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
Regards
Swati
Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

HI Brad and team,
BRED is right. I check few user exit normally all of us have that list or easily available on net.
BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
That why I need a User Exit/BADI/Enhancement Point which trigger at save but before document no assignment.
Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process." .
Suggest user exit USEREXIT_FILL_VBRK_VBRP trigger before save. I need at save the reason is VBRK-FKDAT this can be change.
Feel free to contact me back if you need more clarification.
Regards
Swati
Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

Is any Userexit or BAdi or enhanc. point while create PO with reference .

Hello Experts,
Is there any Userexit or BAdI or Enhancement point while create P.O with reference .
My requirement is while creating the P.O.(ME21N) with reference, The payment terms is getting copied from the reference P.O. and become grayed out (Non editable) instead of that user want the payment terms which we have maintained in (LFB1) Vendor Master.
Please help me to resolve my problem.
Edited by: Ketanp on Mar 7, 2012 11:48 AM

Hi
Try with badi ME_PROCESS_PO_CUST
Regards
Eduardo

Enhancement point is not processed in Q-System

We are using SAP SCM 7.0, based on NW 7.0 EhP 1.
In the development system we created a new enhancement point (implicit) where everything works fine.
After transport to Q system no enhancement point is processed although the coding is there and listed as 'active'.
BAdI implementations are processed, though.
Do you have a general advise what could be wrong?
We don't have a switch for this Z enhancement.
Thanks,
Michael

Hi Michael,<br />
<br />
I haven't encountered this problem yet, but there's reports in the forum that another activation helped, e.g. see this thread Implicit Enhancement Code not wrking after transport (and if you do a search you'll find more reports like that). People, who encountered this issue, seem to usually say that during debugging the enhancement code doesn't show up, though in the editor it is visible and marked as active.<br />
<br />
Cheers, harald

Failure to create a shared protection point during Windows Server 2012 R2 backup.

Several partitions on a system disk have been extended as well as the backup destination partition. After that Windows Server 2012 R2 failed the backup of a system disk with the following error message 0x8004230C. The Server stated it had failed to create
a shared protection point on source volumes and indicated a problem with volume shadow writer. What needs to be done to fix this error and does it have anything to do with partitions being extended?
Vladimir Shipitsyn

Hi,
What destination did you use to do the previous unsuccessful backup? You could try the steps in the article below to troubleshoot errors where the cause is reported by an underlying layer to Windows Server Backup.
Diagnosing Failures in Windows Server Backup - Part 1 (VSS/SPP Errors)
http://blogs.technet.com/b/filecab/archive/2009/09/16/diagnosing-failures-in-windows-server-backup-part-1-vss-spp-errors.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Enhanced Point & Print compatibility driver in Windows 7

Hi all,
are admin permission needed to install the enhanced Point & Print compatibility driver in Windows 7? The print server is running Windows 2012R2 and the driver type for the printer is V4.
When a user (non admin) tries to add that printer, a dialog box pops up and asks for trust. Is this the default behaviour?
Many thanks!
Nils

Hi Nils,
Would you please let me know whether add a network printer via
Add a printer wizard, then encounter the issue (ask for trust)? Or do any other operation? Just a confirmation, thanks for your understanding.
Please also refer to following articles and check if can help you.
Printer Sharing Technical Details
Configure Print and Document Services
Assign Delegated Print Administrator and Printer
Permission Settings in Windows Server 2012
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Import note - enhancement-point

hi,
I would like to implement a note ("992605"). In this note there were some correction instruction (e.g. "ES_MRYF_COMMON_ROUTINES_ALV"; Objecttype ENHS). If I open the link to the object (click on objectname), there are no details what to do. Now what should I do?
If I open the object-link to "MRYF_COMMON_ROUTINES_ALV" in the note, I get the information to delete following line:
ENHANCEMENT-POINT MRYF_COMMON_ROUTINES_ALV_01 SPOTS ES_MRYF_COMMON_ROUTINES_ALV INCLUDE BOUND.
It's an enhancement-point which I can't delete, because it's not modifiable. What should I do?
Thanks Michael

Hello Michael,
As this note is quite complex (it modifies ENHO and ENHS objects) why do you want to implement it manually? If you use the transaction SNOTE, it will be done automatically.
Please implement note 875986 first that corrects all the SNOTE problems.
Regards,
Walter

Regarding Enhancement Point

Hi Expert,
We have a case where a Purchase requisition created parallel with sales order. My problem is I have to update the price of purchase requisition item corresponding to sale order item condition.
I find an enhancement point in include this LEBNEF0B where I can update PR price. My problem is there is no user exit available before it which contains the current condition data to pass it by exporting.
I have this problem only when I create a new line item in existing sales order.
Do someone have any idea and can help me on this.
Regards
Swati.

Hi,
Please elaborate your question if my solution is not relevent, because as per my understanding you want to update some value which is not available in this include to export the value and update.
If I am not wrong you can use Value of I_EBAN and accordingly you can search the velues from include program LEBNETOP where global variables are declared and do the changes accordingly.
Once this global variable for your amount value gets changes it will update the value at the time of save in the table.
You can also Export value to SAP or ABAP Memory and import the same in any relevent enhancement.
Please check it out it should work.

Sap support for standard prog. w/ custom implem of implicit enhanc.points

Hello,
since 1 year I've been confronted to SAP customers which WIDELY implement Implicit Enhancement Points (IEP).
I have been really surprised that my customers undoubtly think, if a problem occurs in a standard program where there are lots of IEP custom implementations, and if my customers estimate after investigation the problem comes from the standard part and not from the IEPs, they think that SAP support would help them to solve the issue.
Note: as a consequence, they created much more IEP in ECC 6 than they did in the past with R/3 old releases (via changes of the standard, aka repairs)!
What I think, is that SAP SUPPORT WOULDN'T HELP them as long as there is custom code (even within IEPs) in the standard program, even if there is only one IEP with one line (because it could change completely the standard algorithm, for example by emptying a global internal table)
So, I think the only way to get help from SAP is to deactivate these IEP implementations before requesting support. And so, the only solution to deactivate them, customers MUST assign IEP implementations to a package and then to a switch and then to a business function, so that they can deactivate it via switch framework.
The main concern is that my customers didn't create switch/business function, so they cannot react quickly if a problem happens in production : reproduce in test system, deactivate custom IEPs by switching off business function (it's what they didn't do), reproduce with full standard to determine problem comes from standard, request help from sap).
Could you share with me what is your approach about implementing IEPs, and maybe, is there somewhere a SAP documentation which explains that officially?
I hope I was clear.
Thank you very much for your kind help.
Best regards,
sandra rossi

I played around a bit with this (as I had never done it before) and also from what I have read, the intended option is the switch framework.
I guess as plan B you could have a virtual system or reliable test environment in which you can disable the enhancement and bring it back again via version management - but from what you have described (IEP deleting gobal variables, etc) this would also remove the "bug" and make the problem difficult to reproduce.
Perhaps the next best thing (unless someone has a better idea) is to inform your customers about neatly organizing their software developments using packages and switches.
To my knowledge, the syntax checks are also getting stricter in this area (as you may have noticed) and I hope that (for some of them) will throw errors one day during the development stage already.
Sorry, that does not help you much (but at least you read "the rules"
Cheers,
Julius
ps: A dirty way of doing it would be to run the program in the new debugger, and skip over the enhancement using the Go-To function. Unlike the classic debugger, the code inbetween does not need to be debugged. Ugly, but effective...
Edited by: Julius Bussche on Nov 10, 2008 9:13 PM

Difference between implicit and explicit enhancement points

Hi Folks,
I had learned many documents to findout the difference between explicit and implicit enhancement point.I got the theoritical knowledge on that but losing on the practical side..
Can anybody help me out with one real time scenario where the explicit enhancement points have been implemented and the step by step procedure to implement it..
Hoping for the positive response from you..
Regards,
Rohan.

Hi Rohan,
In implicit they are available at the beginning of subroutines defined in the standard reports.
Edit-> Enhancement operations->show implicit enhancement options.
This will highlight all the implicit enhancements in the report.
In Explicit enhancement we have two different types of enhancements -
Enhancement point and Enhancement section.
Enhancement point - SAP has some standard functionality defined for a report , but it may be required that you'll need to add your own code. In this case the code that you'll add will be executed along with the standard code.
Enhancement section - SAP has its standard functionality defines but it may not suit your requirement, in that case you may need to add your code and you'll need that code to be executed only. By this method the existing code is automatically commented and a copy of the same code is available to edit.
After executing the report only your code will be executed and the standard code will be bypassed.
For Practicle implementation, follow this link.
Link : [http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc]
i hope it will give you some clear picture....
Thanks.
Anurag

Enhancement points option: Function modules or BADI

Hi, I am on ECC 6.0 and I need to validate and set some requirement in customer sales area data when user input the document output message in Documents tab strip screen 7003 of sapmf02d in transaction XD01 or XD02.
I found that there is function module EXIT_SAPMF02D_001 that I probably can use to create an implicit enhancement point to validate table T_KNVD or I can use BADI customer_add_data. Can someone suggest which way is better and why? I am new to this so could someone show me screen by screen on how to create and implement BADI.
I am confusing about should I create a ZBADI or using existing BADI customer_add_data. If I use existing BADI how can I add my own method with my own code.
Thanks.

Thanks. Could you explain to me how does the custom BADI get call to execute my code? Say
I have a customer document screen 7326 (Customer Master Subscreen SD Documents in program SAPMF02D). What I want is when user click save, I want to do some validation on the output message that they enter and issue some warning or error messages.
I am on ECC 6.0 so I can create a BADI from Enhancement spot not from SE18. SAP has a BADI called CUSTOMER_ADD_DATA with class CL_EX_CUSTOMER_ADD_DATA and interface IF_EX_CUSTOMER_ADD_DATA.
When I create a ZBADI_CUST, which interface class I put in the IF_EX_CUSTOMER_ADD_DATA
or a ZIF_EX_XX so that I can create my own method? How does the BADI get called when I am in transaction XD02 and click the save button? Could you kindly show me step by step the procedure.
Thanks.

EXIT/ BADI/ Enhancement point for User Status change in Order

Hi all,
I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
Thanks and Regards,
Sonal

Hi,
Use this Enhancement IWO10009 and call these function module to change the User Status
STATUS_TEXT_EDIT --> To Read the existing status.
STATUS_CHANGE_INTERN_VB --> to change the status.
Regards,
Satish

Disable Item Category Field in Va01using Enhancement Point

Dear Experts,
I have a requirement to disable the "Item Category" column in VA01 transaction for certain order types.
I have tried using MV45AFZZ(USEREXIT_FIELD_MODIFICATION), but it does not help me much as it works only if a material is entered in the table.
I want the field to be disabled even if no material is entered in the item level table, i.e. during the load of the Overview screen.
I know we can do this using Implicit Enhancement Points, but i am not able to get the exact include to implement my code.
Can anyone please help me in finding the exact location to write my code, so that the "Item Category" column will always be disabled for that order type.
Thanks,
Praveen

Go to the screen where you want to disable the column by using system--> status-(click on screen no).
Identify the perform statement in PBO before the table control loop.there try implicit enhancement.
It will definitely work.
Thank You <Reward request removed by moderator>
Edited by: Vinod Kumar on Sep 30, 2011 3:01 PM

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

Shared enhancement point problem.

Similar Messages

Maybe you are looking for