Shared file missing from My Forms tab

I shared a form with a co-author, but the form does not appear in their My Forms tab. I've tried removing them and resending the invitation, but still no luck. What could the problem be?

Hi,
  I am not able to reproduce this problem. If the other person is using the FormsCentral desktop app, please have the other person sign in with his/her AdobeID/password (Click on "Sign In" at the upper right corner of the app)
Please write back if you still have problem.
Thanks,
Lucia

Similar Messages

  • Shared File Missing from Time Capsule

    This morning all of my shared files are missing.  There used to be two folders in the time capsule file and now there is only one "DATA" which is where our workstation backups go.  The other one was a Shared File where we put all of the files we shared across the network.   The DATA file is there, but the Shared file is completely missing.  I have tried searching the individual workstations and I cannot find it or anything that was within it.   Any ideas how to find/restore it?

    Very strange stuff happens.. let me tell you .. if you put a computer onto yosemite .. even one..even briefly.. like a laptop someone bought in and connected to the TC,  it can do some very odd stuff to the network files.. permissions is a big big issue.
    Time Machine cannot backup network drives.. so sharing files from the TC is always a very very bad idea. The TC is designed purely as a backup target for Time Machine. It should be used very carefully beyond its design parameters.. since it cannot back itself up either.
    I still think the files are there.. unless it was deliberately deleted.
    I don't think you will like my suggestions to get the files back though.
    But here is an odd one.. get /borrow /lone a PC laptop running windows.. and load up the airport utility onto it. Then open the TC disk in windows explorer.. type the name directly into the address bar..
    \\TCname.local or \\TCIPaddress (where you replace the TCname with actual NETWORK name (which is not its name as shown on the TC if it has spaces and illegal characters).. that is why using the actual IP is easier.. TCIPaddress replace with IPv4 address eg 10.0.1.1
    Windows cannot read Mac permissions so tends to open everything. It cannot read it correctly all the file info sometimes but you will quickly see what is there and what is missing.
    Another suggestion.
    Full factory reset of the TC. No files on the hard disk are changed doing this.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Run through the airport utility and use all short names no spaces and pure alphanumerics. Passwords should also match that except longer.. 8-20 characters work well for both.
    Now manually mount the disk in Finder.
    Use Go, Connect to Server in Finder.. type in
    AFP://TCname.loca or TCIPaddress (same as above definitions).
    In the new clean mount of the TC disk see if you can locate the directory or folder with your missing files.
    Otherwise if the files are important.. you must immediately stop using the TC.. remove its hard disk or get a store to swap disks for you .. and preserve the old one.. use a proper USB to SATA holder and plug it into your Mac and use a file recovery software like Data Rescue 3 to see if the files are deleted but available. I have had success using this method. Even just running disk utility to fix permissions can sometimes get the results you want.
    If it is a fairly old TC.. with say a 1 or 2TB disk it is very easy to open the TC and change out the disk.. ask if you are prepared to go this path and we can give you more info.

  • Where can I get help re: a file missing from Pages in iCloud?

    Where can I get help re: a file missing from Pages in iCloud?

    If the file was also on a mac, then there was a local copy of the file in ~/Library/Mobile Documents.  If you use Time Machine or any other backup program on your computer, then try restoring the file(s).  Similarly the same thing would be done on a PC, but I'm not sure where the icloud local copies are kept.

  • [svn:fx-trunk] 10506: New TLF file missing from svn 10505.

    Revision: 10506
    Author:   [email protected]
    Date:     2009-09-22 10:43:46 -0700 (Tue, 22 Sep 2009)
    Log Message:
    New TLF file missing from svn 10505.
    Added Paths:
        flex/sdk/trunk/frameworks/projects/textLayout/textLayout_edit/src/flashx/textLayout/opera tions/CopyOperation.as

    Revision: 10506
    Author:   [email protected]
    Date:     2009-09-22 10:43:46 -0700 (Tue, 22 Sep 2009)
    Log Message:
    New TLF file missing from svn 10505.
    Added Paths:
        flex/sdk/trunk/frameworks/projects/textLayout/textLayout_edit/src/flashx/textLayout/opera tions/CopyOperation.as

  • [svn:osmf:] 14905: Adding file missing from previous commit.

    Revision: 14905
    Revision: 14905
    Author:   [email protected]
    Date:     2010-03-22 05:37:59 -0700 (Mon, 22 Mar 2010)
    Log Message:
    Adding file missing from previous commit.
    Added Paths:
        osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/
        osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/Standard0755.swf
        osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/readme.txt

    If you're confident that the DP contains the new file, try deleting the deployment and re-doing it (not the deployment type - just the deployment to your test collection).
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • [svn:osmf:] 14904: Adding file missing from previous commit.

    Revision: 14904
    Revision: 14904
    Author:   [email protected]
    Date:     2010-03-22 05:32:49 -0700 (Mon, 22 Mar 2010)
    Log Message:
    Adding file missing from previous commit.
    Added Paths:
        osmf/trunk/libs/ChromeLibrary/org/osmf/chrome/hint/
        osmf/trunk/libs/ChromeLibrary/org/osmf/chrome/hint/Hint.as

    If you're confident that the DP contains the new file, try deleting the deployment and re-doing it (not the deployment type - just the deployment to your test collection).
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • [svn:osmf:] 10540: Adding file missing from previous commit.

    Revision: 10540
    Author:   [email protected]
    Date:     2009-09-23 11:39:41 -0700 (Wed, 23 Sep 2009)
    Log Message:
    Adding file missing from previous commit.
    Added Paths:
        osmf/trunk/framework/MediaFrameworkFlexTest/org/openvideoplayer/gateways/TestHTMLGateway. as

    If you're confident that the DP contains the new file, try deleting the deployment and re-doing it (not the deployment type - just the deployment to your test collection).
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • UCM 11g File missing from search result although file is accessable

    When I do search without any criteria in UCM 11g, some files missing from search result although I know the files were checked into UCM already since I'm able to see these files using url similar to:
    http://ucm/cs/idcplg?idcService=GET_FILE&dID=12345
    or use following url to get document information:
    http://ucm/cs/idcplg?idcService=DOC_INFO&dID=12345
    the file is not in the search resule even search by ID.
    also, the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
    Is this a known problem? the same search was working in UCM 10 perfectly.
    Thanks

    The query seems able to retrieve the missing document. for example, I search by content ID, in the audit log (eanbled as you mentioned) give th efollowing information:
    fusionappsattachments/6     09.13 06:22:03.878     IdcServer-3474     --- @ResultSet SearchResults ---
    fusionappsattachments/6     09.13 06:22:03.878     IdcServer-3474     numFields=66,*numRows=1*,currentRow=0
    also, the infomation following above give the deteail field information which match with the missing document.
    I looks like UCM just did not bring it to UI as part of search result.
    This seems match with my another finding as I mentioned earlier: the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
    it seems query did find the documents but UI did not show it.
    Not sure if this is a known bug.

  • [svn:osmf:] 13186: Adding files missing from previous commit.

    Revision: 13186
    Revision: 13186
    Author:   [email protected]
    Date:     2009-12-23 05:26:07 -0800 (Wed, 23 Dec 2009)
    Log Message:
    Adding files missing from previous commit.
    Added Paths:
        osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_disabled.png
        osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_down.png
        osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_up.png
        osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_disabled.png
        osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_down.png
        osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_up.png

    I just checked my original file and it is 30fps...
    Also other clips from the same camera were correctly finalized, just this one clip "disappeared".
    Any ideas anyone?
    Thanks.

  • Files missing from install directory

    not sure what's happened to my computer but I can no longer install programs or updates for programs as I get the message "files missing from install directory"
    How did they get corrupt in the first place? I get this when trying to download yahoo messenger of all programs...duh!  I'm getting pretty frustrated since this has only started a month ago and I've been hoping something would fix itself but no....the last time my Toshiba service station updated was Jan 24 and now it says unable to connect with server....yet I got here to post a message and can get to the internet so don't understand why the updates can get in?
    any advice?

    that can be a problem with your windows.. your OS..
    rebuilding your OS should be able to fix it.
    oOo
    *Read EULA before installing any software.
    √

  • "Sync All Movies" option is missing from the Videos tab.

    Hi,
    I just imported 453 short movie clips (totaling around 1.8 GB) into iTunes and now I want to synchronize them to my iPhone. I noticed that the option to "Sync All Movies" as found in previous versions of iTunes or perhaps only enabled for other devices is missing from the Videos tab under my iPhone's sync options. Is Apple seriously suggesting that I have to manually check off 453 boxes in a list box that only displays 10 items vertically at a time? I'm at a loss for words.
    If there's any way I can have iTunes automatically do this, please let me know. Here's a screenshot of the feature in question, MIA for me:
    http://www.info.apple.com/images/kbase/304680/syncmovies.jpg
    Thanks.

    My mistake, apparently shift clicking one item selects them all. I was trying to do the Windows CTRL + A shortcut (which works in the Library view but not in the list box of Videos to sync).
    I guess that makes me a typical Windows user.

  • Shared heading missing from sidebar

    i have a macbook pro listed below, plus an imac 2.66 intel core 2 duo. i can see the mac book pro in the sidebar of the imac, but not the other way round. a while ago i remember "hiding" the shared tab from the sidebar, now i can not retrieve it .both are connected to the internet, and i am sharing files between the 2 as i write this. can anyone point me in the right direction please?

    So you don't see this?

  • One of my forms and it's responses are missing from "My Forms"

    Two days ago I was working with the responses from one of our forms.  I went to continue to work on the data last night and the form and all it's responses are missing.  Is there any way to restore the form and/or it's responses from a backup?
    Also, I have a pdf copy of the form, but when I go to import it I get an error basically saying I cannot import the form because it has already been distributed.  Is there any kind of workaround to this so I don't have to recreate the form from scratch?
    Thanks
    Max

    Max,
    FormsCentral currently does not import the pdf copy back.  Sorry for that.  If you want to have a backup copy of a FormsCentral form, a better way is export the form design. You could do that in the Form Design, File – Export Design File…, to export the form design and save it locally.  You could then import the form design back to your account in a later time.  Note, export the form design would not include the responses data. 
    Regards,
    Perry

  • Why are Albums missing from the Albums "tab" in Photos app?

    I just upgraded to the new version of OS X with the new Photos app.  All of my photos transferred over to the new app correctly, but not all of my Albums are showing up in the new Albums "tab" in the Photos app. 
    For instance, my "Honeymoon" album does not show up on the Albums "tab," but when I search for in the Photos app it will appear. 
    How do I get all of my Albums to show up on this tab?
    Additionally, does anyone know how to change the "timestamp" on photos?
    Any help would be greatly appreciated!

    Terence,
    I appreciate the reply, but that did not solve my issue.  Several of my albums are still "missing" from the list, even though I can find them when I search:

  • JSP : latest  JSTL, File Upload from web form Client to Server Question!

    I understand that within a JSP, It is possible to read a file from the Client by opening a Stream somehow.
    How do I code, within jsp/servlet (non tag) java code inside <% %>
    blocks, WITHOUT openening a new connection to the URL, an InputStream from a client web browser form, from a file upload coded using
    <input type="file" name="file1"/> ?
    I have previously achieved this quite simply with a FileInputStream
    with the previous version of JSTL.
    How may I do this with the latest version of JSTL, with this index.jsp?
    -with a simple text file.
    -with a Binary file (with DataInputStream)?
    <%--
    Document : index
    Created on : 27/01/2009, 3:08:32 PM
    Author : Zachary Mitchell
    --%>
    <%@page contentType="text/html" pageEncoding="UTF-8"%>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
    <title>JSP Page</title>
    </head>
    <body>
    <h1 align="center">Hello World!</h1>
    <form name="form1" method ="POST" >
    <table align="center">
    <tr>
    <td>
    <input name="file1" type="file" align="center"></input>
    </td>
    </tr>
    <tr>
    <td>
    <input type="submit" value="submit" action="index.jsp" ></input>
    </td>
    </tr>
    </table>
    </form>
    <!--*********************************************************************** -->
    <%@ taglib uri="http://java.sun.com/jstl/core_rt" prefix="c" %>
    <%@page import = "java.io.*" %>
    <c:if test="${pageContext.request.method=='POST'}">
    <%
    File fileName = new File(request.getParameter("file1"));
    out.println(fileName.toString());
    FileInputStream stream = new FileInputStream(fileName);
    out.println(stream.toString());
    %>
    </c:if>
    <!--*********************************************************************** -->
    </body>
    </html>

    If I have:
    <!-- ***********************************************************************************-->
    <form name="form1" method="POST" enctype="multipart/form-data">
    <input name="file1" type="file"/>
    <input name="submit1" type="submit" value="Submit" action="index.jsp"/>
    </form>
    <!-- ***********************************************************************************-->
    and run this in an index.jsp, use browse to select my text file, and click SUBMIT.
    I can use:
    InputStreamReader reader = new InputStreamReader(new DataInputStream(request.getInputStream()))
    BufferedReader bufferedReader = new BufferedReader(reader);
    bufferedReader.readLine();...
    However, these is some HTML/POST related content around what multiple readLine();
    calls return.
    Is there an easy way, like using "${param.file1}",
    aside from [http://commons.apache.org/fileupload/|http://commons.apache.org/fileupload/],
    maybe using servlet style code, to get the File contents from a remote Client,
    to the remote Server servlet engine, AVOIDING ANY SUPERFLUOUS CONTENT,
    using version 1.12 of the JSTL, JSP 2.0,Tomcat 6?
    Just politely, yes, no, and how?
    Edited by: Zac1234 on Jan 29, 2009 3:27 AM
    Edited by: Zac1234 on Feb 1, 2009 8:29 PM

Maybe you are looking for