Ship note is csd +gr processing which field taken from the po

Ship note is CSD + GR procesing time, which should be taken from the PO.
please given me the process flow clearly which field i have to take

check KONP table for CSD values , and EKBE for GR time,
Regards
Peram

Similar Messages

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

Not a lot of details here, but my guess is this isn't working for you because you are wiring in the task to the Active Channels Property and not the actual Channel Name. I have attatched a screenshot of what I believe you are trying to do. The Task has 2 channels in it, so I need to index off one of the channels and wire it into the active channels input of the Channel Property node. Then I can read information about that channel
Attachments:
channel_name.JPG ‏69 KB

When i give end location from my location which is selected from the options available, also i receive the message that the directions could not found- pl. help

when i give end location from my location which is selected from the options available, also i receive the message that the directions could not found- pl. help

# Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
# Sign back in, and you will be asked to save the password you entered.
# This will save the password and autocomplete if you have this option turned on.
I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]

After restoring my iMac to factory settings it doesn't allow me to get iPhoto, iMovies and pages, which i had from the os x update. anyone knows how to recover them, as they are not on the purchased items? thanks

after restoring my iMac to factory settings it doesn't allow me to get iPhoto, iMovies and pages, which i had from the os x update. anyone knows how to recover them, as they are not on the purchased items? thanks

From your backup.

Which field matches to the WBS element

Hi,
I am doing an interface program, in that I need to populate the WBS element in trasaction VA01 under the tab Account Assignment. I am using the BAPI 'BAPI_SALESORDER_CREATEFROMDAT1'.
Let me know which field matches the field WBS Element in the structure 'ORDER_ITEMS_IN' which is returned from the said BAPI.
Thanks in advance,
RG

Hi
In VBAP there is a field for this WBS ELEMENT PS_PSP_PNR
check for that in BAPI structures
check the field ASSORT_MOD of BAPIITEMIN .
Reward points if useful
Regards
Anji

How to get the field type from the database dictionary in screen painter

hi,
I wanted to create a new input field that input field should have the data element from the structure that i have created. How to get the data field type from the database dictionary in the screen painter

hi
good
there is two kinds of evernt
PROCESS ON HELP-REQUEST
PROCESS ON VALUE-REQUEST.
which ll help you to give two types of help one is f1 help and another one is f4 help
go through this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/47/e07f622b9911d2954f0000e8353423/content.htm
thanks
mrutyun

How to catch Exception in backingbean which is thrown from the Model layer.

Hi,
JDev Ver: 11.1.1.2.0
In my application there are two layer viewcontroller & model.
In model layer I have created JPA service facade which does the database operation like persist, merge & remove entity.
I am calling this service facade method from backing bean via below standard code.
public static Object invokeMethod(String methodName, String mapKey,
Object object){
BindingContext bcx =
DCUtil.getBindingContext((HttpServletRequest)FacesContext.getCurrentInstance().getExternalContext().getRequest());
JUFormBinding bc1 = (JUFormBinding)bcx.getCurrentBindingsEntry();
FacesCtrlActionBinding reassignOperationBinding =
(FacesCtrlActionBinding)bc1.findControlBinding(methodName);
if (mapKey != null && object != null) {
Map params = reassignOperationBinding.getParamsMap();
params.put(mapKey, object);
Object result = reassignOperationBinding.execute();
return result;
This is a static method which I am calling from backingbean to invoke service facade persist, merge or remove entity method
I have written throws in all the methods signature of service facade.
The exception which is thrown from the service facade are not comming back to backingbean catch block.
Is there any way to catch this exception in backingbean.
regards,
devang

Hi,
2 things to check
1 - does reassignOperationBinding has errors. You can check on the component
2 - does the exception show on the binding layet. See the Fusion Developer guide for how to define an error handler on the databindings.cpx file
Frank

Hi please help.virus iPad? I have a iPad 2 , not jail broken, just 2 months old fresh from the apple store. Recently I have been directed to **** sites or a fake bad oink **** application, t

Re: Mail virus and Trojan issues
21-Jan-2013 14:58 (in response to Memoire)
Hi please help.
I have a iPad 2 , not jail broken, just 2 months old fresh from the apple store. Recently I have been directed to **** sites or a fake bad oink **** application, through various applications. From google chrome app, the photon app and safari.
I always delete cookies and cache on exit. I use photon and puffin to watch flash player videos on tv series site with links such as put locker. I heard that there is no virus for the iPad but Trojans do exist.
Pleae help, at first this was just happening with photon app now in 3 different apps, and it is directing me always to the same **** site. I don't watch **** so it's. it from cookies or whatever and my iPad has been randomly turning off and also the videos are working really badly now. Also there is a message red alert staying untrusted site and hacker may be intercepting your device. What is going on? Please help
Is their a new redirecting Trojan or virus for iPad 2. ? If yes how can I remove it and will it cause permanent damage to my device? How could I have got this virus and in 3 apps. I'm also,worried as I use my iPad to buy things online etc with my credit card. What shall I do?.. Do I restore my device? How do I do that as I cannot connect to iTunes as I do not have a computer, just my iPad. Any help appreciated thanks.

AlaskanElizabeth wrote:
Happily- perhaps the most legit tech site on the Internet- cnet:
http://news.cnet.com/8301-1009_3-57506159-83/apples-ios-and-android-are-new-favo rite-malware-victims/
They broke a story on sept 4, 2012 titled "apple's iOS, the new favorite malware victims"
Despite the dramatic title of the article, the only mention of iOS in the body was this:
Even though malware is increasing in iOS, it still remains relatively low compared with other operating systems.
And, it provides no examples or other documentation. And, unlike you, I don't consider CNET "the most legit tech site on the internet". I find them to be generally biased in their reiviews and heavily influenced by advertisers.
http://www.forbes.com/sites/timworstall/2012/06/26/yes-apples-machines-really-ca n-get-viruses
The Forbes article descibes issues with the Mac OS, of which there always have been some, though certainly far fewer than there have been on the Windows platform. It goes on to speculate :
All those iPads, iPods and iPhones? Is this going to be a juicy enough target for the virus and trojan writers to at least attempt to attack, even given the difficulty of doing so?
Again, the Forbes article doesn't mention any current viruses, trojans or malware that exist which will affect an unjailbroken iOS device.
http://www.huffingtonpost.com/2012/05/15/iphone-malware-kaspersky_n_1515074.html
And, the HuffPo article quotes Grebennikov thusly:
"Our experience tells us that in the near future, perhaps in a year or so, we will see the first malware targeting iOS," Nikolai Grebennikov, Kaspersky's chief technology officer, told Computing.
Again, even Kaspersky doesn't say such things exist now, merely that they might.
Speculation about what might happen in the future or articles focusing on the Mac OS or Android are not terribly relevant. So, if you do have any other citiations, preferably from a source that doesn't derive most of is revenue from the companies it reviews, that document a virus or trojan that affects an unjailbroken iOS device, I would be interested. I have not been able to find any. I thought, perhaps, as a professional, you might know of some.
Thank you.

Disabling that"..is an application which was downloaded from the Internet."

Downloaded Camino and use it. Now I do not want that warning anymore on every start. I do not give **** how Apple rates security of the file. I know the application is safe so I want to click some checkbox to disable warning on Camino start:
'“Camino” is an application which was downloaded from the Internet. Are you sure you want to open it?'
The only unsafe Camino is to Safari as recent version of Safari is really troubled with hick-ups and freezes while Camino seems to be very similar except that it does not have those issues Safari has.
I can only say what guy named Yeroen (read it if want):
http://forums.macrumors.com/showthread.php?p=4414559
It is really Microsoft way. Can Apple get rid of that troll recenly hired in the company that makes Mac OS X now look like piece of... art that behaves so obnoxiously to a user? I cannot guess where Apple got those new ideas, but they definitelly look like some transplant from Vista and XP obnoxiousness. The only what comes to my mind is some folks that were contracted or hired from Microsoft. Shortsighted with narrow vision and lack of basic education on ergonomics of any user interface.
Hey Apple I dropped Windows because of that! Why do you do this to me now?
Sincerely,
Maciek Samsel

Okay. It looks like when copying from mounted .dmg file to Applications folder one needs to start Camino on that account and say once to allow start. This has to be done on account that was used to copy the file from downloaded .dmg.
In my scenario, I have administrative account which is separate from users (and of course my own as I am not administrator daily). So Camino was bothering me until I went to administator account and started Camino once. Apparently it had to make some writings into hidden system files to rememeber the choice and the choice was made across accounts.
I remember that similar issues were in Final Cut Express: you had to start the application from administrative account (the one that you used to install the application) once and after that you could easily go and use the application on other accounts at any time.
Looks like this is some sort of pattern which I considered ill as user really should not need to do that pointless start on account that is not supposed to be used for the application. Installation account and use account should be interpretted as two separate with no overlap of preferences. Now this issue was in FCE,but as far as Camino... it sounds like Apple extends this lame pattern to security control and internal system preferences.
Sincerely,
Maciek Samsel

"Firefox" is an application which was downloaded from the Internet - Open?

Everytime I go to open up programs (for example, firefox) I get a dialog box like this:
“Firefox” is an application which was downloaded from the Internet. Are you sure you want to open it?
Underneath it says "AppFresh downloaded this file on May 3, 2009". These programs are installed via an administrator, but I don't want to have to click yes every time on my standard account. What can I do?

Peter:
I don't want to have to click yes every time on my standard account.
As noted in earlier posts, you should get that message the first time you launch firefox or any other downloaded application. If you get the message each time, for some reason the computer thinks it is the first time you are launching the application. Are you sure that the application is installed in the application folder? Or are you launching from the .dmg each time? If you are,
double click on the .dmg file.
When it opens drag the icon to the Applications folder and it will be permanently installed. You will need to authenticate to install, but you should not have to authenticate each time you launch the application.
Drag any icon that you have in the Dock to the Desktop
Then launch the application.
If you want to keep it on the dock click and hold on the icon
Select Keep in Dock in the pop-up menu.
cornelius

TS3999 I am unable to sync my Outlook calendar with my Iphone. I have noted that the Icloud Outlook add in is not ticked When I attempt to load it from the designated file nothing happens Can anyone help with this? Robyn

I am unable to sync my Outlook calendar with my Iphone. I have noted that the Icloud Outlook add in is not ticked When I attempt to load it from the designated file nothing happens Can anyone help with this? Robyn

Re: check that the appointments in my phone are going into iCloud calendars....exactly how do I do this? I fear this is a really stupid question!
My iCloud account is set up with my Apple ID as one email account (for example [email protected]) which is the email account I use to sign up for internet sites like Amazon, Apple,etc, so that I can differentiate vendors/mass emails. But my default calendar on my iPhone is in a different email name (ie [email protected]) which I use for most communications to friends, relatives, etc. and it is this account that holds most of my appointments. To further complicate things I have other email accounts that I use for business/professional and community work. If I want all my calendars to show on my iPhone AND sync to my iCloud, do I set this at the phone level or the iCloud level? or both?
Let me clarify....It looks like if I go into appointments that I previously set up through my personal account (ie above [email protected]) and edit the entry on my iPhone, selecting the iCloud "home" calendar within the entry, it will then sync to my iCloud account, no problem....do I have to do this to EVERY entry I have? or is there a way to name my personal account as one to sync to iCloud?

How I download a MP4 series of videolectures (that the seller has stored in Amazon S3 and has sent to my iPad email address--which is different from the one I use from the MacBookPro) from my iPad to my MacBookPro-.

How I download a MP4 series of videolectures (that the seller has stored in Amazon S3 and has sent to my iPad email address--which is different from the one I use from the MacBookPro) from my iPad to my MacBookPro (so that I can the save them in iTunes and then synchronize some of the videolectures to the iPad?)

To set it up as POP you need to delete the account, reboot the phone by holding the HOME and SLEEP buttons at the same time until an Apple logo appears (about 10 seconds), then add it back following these instructions: Forcing creation of a POP or IMAP email account
I understand that you have used the same account for many years, but the technology is also changing constantly. Years ago the standard was POP (Post Office Protocol), which was designed at a time when it was inconceivable that anyone would access their email from more than one device. When people started using multiple devices, for the most part they wanted to see changes on one device mirrored on another. A new standard, IMAP (Internet Mail Access Protocol) was developed. With iMAP the master copy of all messages resides on a server, and multiple devices are kept in sync with the server. So if you delete a message from one device it is removed from the server, and then removed from all other devices when they next sync. This is the same way Microsoft Exchange works. Other benefits of IMAP include the ability to have multiple mail folders that are kept in sync across devices. In your case you could use this to create a separate folder for each family member, so they could move messages to their own folder and not clutter up the shared Inbox. Most computer mail readers can even automatically sort incoming mail into folders based on the contents of the message.
IMAP is considered a "higher level" standard than POP. When you create a mail account iOS devices query the server and ask what it supports; if it says it supports IMAP then the account is automatically configured for IMAP. So if you really want POP you must fool it, as described in the link above. In my experience Android devices default to the highest level protocol also, and I suspect newer Blackberries do (although it has been 15 years since I used a BB).

Adverts which slide up from the bottom of the screen

Hi there,
Hoping someone can help me... More often than not, when i'm googling something or on webistes or just general use of the internet using Safari, I get these adverts which slide up from the bottom of the screen. I can't help but thinking that it might be a virus or trojan, but i'm not 100% sure.
The pop up blocker in safari is turned on and has never been turned off, which confuses me somewhat.
This is what the pop up looks like...
Can anyone help?
Thanks
Chris

Yes I did ask this back in .
I knew it wasn't the wireless router as all the other laptops and computers worked fine. So the first one I tried was the DNS Issue. This one did work but only for about an hour or so. I also checked Host Files, and as the article says, I saw basically what they said I should see.
Last week sometime, I tried the last one, Browser Plug-in Issues. I can say that this one has worked, i've left it a week or so before responding as I was waiting to see if the issue had gone away, which it has.

Advert which slides up from the bottom of the screen

Hi there,
Hoping someone can help me... More often than not, when i'm googling something or on webistes or just general use of the internet using Safari, I get these adverts which slide up from the bottom of the screen. I can't help but thinking that it might be a virus or trojan, but i'm not 100% sure.
The pop up blocker in safari is turned on and has never been turned off, which confuses me somewhat.
This is what the pop up looks like...
Can anyone help?
Thanks
Chris

Correction... this hasn't helped. I've still got this problem.
Can anyone help at all?
Many Thanks
Chris

Ship note is csd +gr processing which field taken from the po

Similar Messages

Maybe you are looking for