Short dump while displaying cube data in production

Hi Folks,
I'm getting a short dump while displaying cube data in production, please suggest
Thanks and Regards
Santhosh

Hi Santosh,
I'd suggest to follow as per SAP Note: 568768 - Analysis of SQL Errors causing Shortdumps or Error messages. The Note contains precise steps to analyze such an ABAP dump.
cheers
m./

Similar Messages

Short dump while displaying infocube data

Hi Folks,
I have created one infocube in BW 7.3 with 2 characteristics and one keyfigure for uploading flat file data.
I have successfully uploaded the data into infocube.When i go for displaying data by right click on the infocube it is throwing some short dump.
Pls find the short dump below.
Category                         ABAP Programming Error
Runtime Errors               RAISE_EXCEPTION
ABAP Program               SAPLRRSI
Application Component BW-BEX-OT
Error analysis                                                                                |
A RAISE statement in the program "SAPLRRSI" raised the exception
condition "X_MESSAGE".
Since the exception was not intercepted by a superior
program, processing was terminated.
|
We are using BW 7.3. Pls help me ..Thanks in advance.
Regards
sri

Hi,
check following threads as well
1. ST03N Raise Exception Shortdump when Access BI Workload
2 See if you can activate the Infocube RSDG_CUBE_ACTIVATE
3. CHECK if you have sufficient memory to work in case this is dev or test system
4. check in RSRV in case there is any issue with design
5. InfoCube Data not Visible in BI
Go to Manage>Infocube content>Execute(you may not be able to see anything here)>in the menu (where DETAILS, SORTING)etc are available click on the 10th option> CHANGE LAYOUT--> You may not have anything selected at the left pane in this pop up window.
Select all or your desired objects from COLUMN SET to DISPLAYED COLUMNS. Click on the tick mark & ow see.I think it'll help u...
As suggested you may have some authorization issue.
Thanks and regards
Kiran

Getting short dumps while reading bulky data from excel sheet

Hi all,
We have converted our non-unicode based sap system (R/3 4.7, Windows 2003,
SQL 2000) into a unicode based system recently. We are facing two peculiar
problems for last few days.
*Problem 1 - *Whenever we want to upload the data from excel sheet, the
system throws a dump after reading about 400 entries, while last week the
same system used to read about 8000 entries in a single go.
*Problem 2 - *Also, whenever we realease a transport requst from development
containing a lot of changes, the request will reach the quality system but
without the changes. but if i ll try to import the changes into quality
system after generating more than one request containing small small
changes, they get reflected in QAS immediately. Is there any size
constraint in transporting a request fro DEV->QAS->PRD.
Please suggest some ways.
I am pasting the dump (that I am getting while data uploading from Excel).
~~~~~~~~~~~~~~~~~~
Runtime errors
MESSAGE_TYPE_X*
Occurred on
22.02.2008 at
13:21:02*
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
System
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLOLEA" or "LOLEAU02"
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "nhbho930"
Network address.......... "192.168.0.30"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "NHBHO930"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 17 2007 00:18:58"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "196"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 300
User................ "NHBABAP"
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLOLEA"
Screen.............. "SAPMSDYP 0010"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_SYSTEM_FLUSH".
The main program was "ZBDC_CONTRACT ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
~~~~~~~~~~~~~~~~~~~~~
Thank you all.
Cheers.
Mitra __.____._

for the 50 millionth time: Excel spreadsheets are NOT databases, you should NOT try to use them as such and NEVER access them using JDBC.
You should also under NO condition use the JDBC-ODBC bridge driver (that was actually the 78 millionth time that was told someone).

Short dump while loading master data (0material_attr).

Hi,
I am experiencing a short dump while loading 0matrial_attr from R/3.
Name of the runtime error :
DBIF_RSQL_SQL_ERROR
program is generating exception at this point.
***Try to insert the records into the ODS table
INSERT /BIC/B0002905000 FROM TABLE L_T_DATA.
pls help me.

Hi,
I am sure I am looking at the proper dump.
the code I have pasted is the standard code.. which I get to see in the dump analysis.
******************************dump analysis*********************************
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure "INSERT_ODS"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-14400: inserted partition key does not map to
any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0002905000 ]"
Please check the entries in the system log (Transaction SM21).
system log in SM 21 is below**************
After the attempt to access a database table the database system has
returned an error code which indicates that the operation concerned
could not be performed successfully.

Short Dump while executing costing run or production orders

Hi Guys,
While executing the costing run or production orders saving, we are getting short dump. it is the debugging is showing its fingers at A035 which is related to maintenance of overhead rates.
We have maintained the overhead rates correctly. There is no issue.
This could be some thing related to OSS notes as well.
Just wanted to know if it has got something to do with OSS notes or something else.
Please throw some light in this regard
Thanks in advance

Hi,
In what program there is a dump? I mean, what is the log saying?
Regards,
Eli

Short dump while displaying a particular tab

hi all,
In a user exit, in IW32 transaction i am displaying a particular tab after a popup warning box. I am able to display the tab i wanted to using field-symbols and changing the T185 at runtime (i changed the build group and panel fields at runtime). but after displaying the screen, if i click on header tab it is giving me a short dump. the error is raised relative to CAUFVD_UPD-INDBT and the error is "ERROR WHEN READING ORDER HEADER WITH INDEX". can anyone explain me what could be the problem? and a possible solution to avoid it.
thanks in advance,
Anil.

Hi Santosh,
I'd suggest to follow as per SAP Note: 568768 - Analysis of SQL Errors causing Shortdumps or Error messages. The Note contains precise steps to analyze such an ABAP dump.
cheers
m./

Short dump while loading statistics data - 'CX_RSR_X_MESSAGE'

Hi all,
When I am loading statistics data with Init selection, system gives short dump error. Below is the message-
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
If anyone know the answer please share with me.
Regards,

Hi Preet,
Please find the details of short dump from ST22-
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
     and therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE"
Regards,

Customized Table is giving Short Dump .Want to extract data in Production S

Hi ,
I have a problem in customized table .Table is giving a data after trying to access 185th record.There is some problem in the table.But I want to pull out all the data from the table..Is it possible to download it .Pls suggest..
Even If I put one select query also it is givning dump..
Pls suggest some other technique to download it..
Regards
Arun.P

Hi Arun,
Where there you are using WHERE condition in select statement while fetching the records?
if yes means check for the fields are primary key, available in WHERE condition, or else create secondary index for those
non Primary key Fields in WHERE condition.
This may help you.
Thanks and Regards,
Prakash.K

To handle dump while displaying the data

hi,
I have a requirement in which i have created a assignment block which fetches some data after confirming an account. But sometimes if the number of rows of data fetched are more than 1000 then it gives dump.
Can anyone suggest how to handle this dump as we can not restrict the data for 1000 records due to our requirement.
Or if it can be done by using Try and Catch than How ?
Cheers,
Sharad

Hi,
Are you sure that the exception comes just because the result is more than 1000? Any way, you can put your code within a try..catch block.
try.
<your code>...
catch cx_root.
<handle exception if you want>
endtry.
{code{
note that cx_root will catch all exceptions, but you will lose the advantage of exception specific handling. Also, the exception must be "catcheable".
Regards,
Arun Prakash

Regarding Short Dump While loading data from DB Connect

Dear All,
We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
Runtime Error PERFORM_CONFLICT_TAB_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for the error that I am getting

hi,
Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
Summary
Symptom
When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
("X") The row types of the two tables are incompatible.
("X") The table keys of the two tables do not correspond.
Other terms
transactional InfoCube, SEM, BPS, BPS0, APO
Reason and Prerequisites
The error is caused by an intensified type check in the ABAP runtime environment.
Solution
Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
Apply the attached correction instructions.
BW 3.0B
Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
BW3.50
Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
Header Data
Release Status: Released for Customer
Released on: 18.02.2004 08:11:39
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-BEX-OT-DBIF Interface to Database
Secondary Components: FIN-SEM-BPS Business Planning and Simulation
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
Support Packages
Support
Packages Release Package
Name
SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
Related Notes
693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
647752 - SAPBWNews BW 3.0B Support Package 20
601051 - SAPBWNews BW 3.1 Content Support Package 14
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Ref.
Correction Last
Modifcation
301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
Attributes
Attribute Value
weitere Komponenten 0000031199
Thanks
(Activate ODS/Cube and Transfer rules again..)

Short Dump while maintaining conditions in Product master

Hi Experts,
We are getting short dump while we want to maintain conditions in the product master.
The dump message is as follows -
CREATE DATA: The specified type "/1CN/WS_ID_300PRODUCTBBP_SKU_T" is no valid
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CREATE_DATA_ERROR', was not
caught in
procedure "/SAPCND/MNT_INIT_OW" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The dynamically specified type "/1CN/WS_ID_300PRODUCTBBP_SKU_T" at CREATE DATA
is no valid data type.
The type is either unknown or an object type.
I checked for OSS note but could not get success and also i could not explore in SDN. Can anybody help me in this.
Thanks a lot in advance!!
Thank You
Abhinandan

Hi
Please go through the following SAP OSS Notes, which will definitely help ->
Note 930816 - Cond. Maint. group not generated after remote client copy
Note 1051896 - Cond. group WS deleted in source aft. remote client copy
Note 971825 - Short dump caused by dynamic working set
Note 969475 Short dump after applying notes 966127&966197
Note 661287 - Name of the condition maintenance group
Note 1009001 - ShortDump when Creating Mkt-Obj by Copying
Do let me know.
Regards
- Atul

Short dump while executing info package in 3.5 data flow?

Hi,
i am getting short dump while executing info package while executing info package. it was working perfectly 2 days back suddenly it is giving this problem. it is a full load for info object text data and i have only 600 records. when i tried with " only info package" it is working perfectly n bringing the data into PSA. But when i use "PSA and the into data target" it is giving short dump.
i replicated Data source and also i activated transfer rules, update rules still it is not working. When i check with another info objects it is working perfectly fine. i dont know what is wrong with only particular info object.
Please find attached short dump.
Thanks

Hi,
When you load transaction data I think there is a deadlock.
Check in the process overview (transaction SM50) the waiting processes are in program SAPLSENA .
The program SAPLSENA is the lock handler tool.
Also check if ACR is running on this target while your load is happening.
Check in SM12 if there are any lock entries for the Infoobject to which you are loading data and on RSICCONT table .
Try reloading after deleting the locks manually.
Regards.

System Throws short dump while executing data source 2LIS_11_VASCL in RSA3.

Hello Experts,
I got short dump while executing data source 2LIS_11_VASCL in RSA3.
The details are as follow.
When importing object "MC11VA0SCL_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 567.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
I have checked source and target fields and those are of same length and data type.
Could you please give some points why this short dump occurs.
Thanks
Konda Reddy

Hi,
This error is not between BI and R/3. It is within R/3. You may have setup data and then modified the datasource.
Delete setup data, generate your datasource again. Setup data and try again.
If you are on a live system with data setup after a downtime and you do not want to delete it, then bring your datasource to the original state when you setup data and pull data.
Cheers....

Short dump while changing the end date of infotype 0167 through PA30

Hi all,
I am getting short dump while changing the end date of infotype 0167(Health Plans) through Tcode PA30.
dump descript is as below
An exception occurred that was not caught.
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_HRPA_VIOLATED_POSTCOND
Date and Time          11.03.2010 07:06:26
What happened?
    The exception 'CX_HRPA_VIOLATED_POSTCONDITION' was raised, but it was not
     caught anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_HRPA_SAPUP50R_ADAPTER======CP' has to be
    terminated.
thanks
shahid

Search OSS Notes for that.

Short Dump while executing ALV Grid.

Hi All,
I m getting a short dump while trying to execute an ALV.
The dump exception is of type
CX_SY_DYN_CALL_ILLEGAL_TYPE class.
The message displayed is : " Call to form 'GI_FIELDCAT' is incorrect .The actual parameter in PERFORM is different data type than requested for form GI_FIELDCAT " .
The part of programe included is as follows:
FORM build_fieldcat .
 PERFORM gi_fieldcat USING 'MBLNR' text-014 '1' '20'.
 PERFORM gi_fieldcat USING 'ZEILE' text-005 '2' '4'.
 PERFORM gi_fieldcat USING 'MATNR' text-006 '3' '18'.
 PERFORM gi_fieldcat USING 'MAKTX' text-028 '4' '40'.
 PERFORM gi_fieldcat USING 'MATKL' text-029 '5' '40'.
 PERFORM gi_fieldcat USING 'BUDAT' text-027 '6' '10'.
 PERFORM gi_fieldcat USING 'MENGE' text-026 '7' '9'.
 PERFORM gi_fieldcat USING 'DMBTR' text-025 '8' '13'.
 PERFORM gi_fieldcat USING 'WAERS' text-011 '9' '5'.
 PERFORM gi_fieldcat USING 'RSNUM' text-012 '10' '10'.
 PERFORM gi_fieldcat USING 'PSPHI' text-013 '11' '10'.
ENDFORM. " build_fieldcat
FORM gi_fieldcat USING fieldname TYPE slis_fieldcat_alv-fieldname
 colmname TYPE slis_fieldcat_alv-seltext_m
 colmpos TYPE slis_fieldcat_alv-col_pos
 outputlen TYPE slis_fieldcat_alv-outputlen.
wa_fieldcat-fieldname = fieldname.
wa_fieldcat-seltext_m = colmname.
wa_fieldcat-col_pos = colmpos.
wa_fieldcat-outputlen = outputlen.
wa_fieldcat-
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. " gi_fieldcat
Can ayone gimmi a solution for the same.

Hi,
Try to change ur code like the below.
Attached: sample code
Building field catalog
PERFORM modify_catlog USING:
'GT_OUTPUT' 'AUART' text-t02 '1',
'GT_OUTPUT' 'KUNNR' text-t03 '2',
'GT_OUTPUT' 'NAME' text-t04 '3',
'GT_OUTPUT' 'KWMENG' text-t05 '4',
'GT_OUTPUT' 'VRKME' text-t06 '5',
'GT_OUTPUT' 'LFIMG' text-t07 '6',
'GT_OUTPUT' 'GEWEI' text-t08 '7',
'GT_OUTPUT' 'VOLUM' text-t09 '8',
'GT_OUTPUT' 'VOLEH' text-t10 '9',
'GT_OUTPUT' 'BRGEW' text-t11 '10',
'GT_OUTPUT' 'UOMGW' text-t12 '11',
'GT_OUTPUT' 'VARCE' text-t13 '12',
'GT_OUTPUT' 'UOMVR' text-t14 '13'.
FORM modify_catlog USING pa_tabname TYPE string
 pa_field TYPE string
 pa_text TYPE string
 pa_pos TYPE string.
CLEAR gs_fieldcatalog.
*Modifying field catalog
gs_fieldcatalog-col_pos = pa_pos.
gs_fieldcatalog-fieldname = pa_field.
gs_fieldcatalog-tabname = pa_tabname.
gs_fieldcatalog-seltext_m = pa_text.
APPEND gs_fieldcatalog TO gt_fieldcatalog.
CLEAR gs_fieldcatalog.
l_repid = sy-repid.
To call function to display ALV output
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = l_repid
 it_fieldcat = gt_fieldcatalog
 TABLES
 t_outtab = gt_output
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE e000 WITH text-t16.
ENDIF.
Reward if helpful.
Regards,
Ramya

Short dump while displaying cube data in production

Similar Messages

Maybe you are looking for