Short dump while executing the DTP
Dear Experts,
While executing the DTP the system is generated short dump and it is Quality server not in Development system.
The error details are in method Calculate_keyfigure_ds and the data is loaded for IS retails from POSDM.
The error details:
"The MOVE-CORRESPONDING statement can only be used on operands with a
structured type.
In the case at hand, this condition is not fulfilled: Operand "<L_STRUC>" has
the type "C"."
Regards,
Amit
Hi Amit ,
Move corresponding statements can be used for structures only and from the error message it seems that there is datatype mismatch.
Check for the errors ion link :
http://help.sap.com/abapdocu/en/ABAPMOVE-CORRESPONDING.htm
Hope it helps ,
Regards,
Supriya
Similar Messages
-
Short Dump while execuition of DTP.
Hi,
I got short dump while execuiting the DTP.
Error messages shows as below:
1.The database returned a value containing an error
2.An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3.Exception CX_SY_NO_HANDLER logged
Could you please help us in solving this issue.
Regards,
Suman.hi,
an error like this comes usually in 2 cases
1) not enough resources are available to carry out loads.in this case increase no of parallel processes to 2-3 in dtp setting,check the option get delta request by request(if its a delta load) and decrease packet size to 10000(from default 50000)
2)fileld to field assignment is not proper:
u need to check if there is any source field with lenth lets say 5 ans is getting assisgned to a target field length lets say 4.in this case dumps will come
please check the error message in st22 and here you can also check the termination point.please check in option Chosen variables /contents of system fileds where you can get temp values at point of termination.here you can pinpoint values at which prog is throwing dumps. -
Short Dump Error while executing the DTP
Hello Experts,
I am facing an issue with DTP.
Data has been loaded to PSA successfully but while executing the DTP for loading from PSA to DSO (WO) throwing a short dump RAISE_EXCEPTION.
Short text
Exception condition "NO_DS_LG_FOUND" raised.
"RAISE_EXCEPTION" " "
"SAPLRSSTATMAN" or "LRSSTATMANU1
"RSSTATMAN_GET_PARTTAB_PSA"
or
"SAPLRSSTATMAN" "NO_DS_LG_FOUND"
or
"RSAWBN_START " "NO_DS_LG_FOUND"
We are on BI support pack 14 SAPKW70014, searched for OSS notes but there are few for SP 12/ 13.
Did any body faced the simlliar issues,,,, please help
Appreicate your quick response.You may wish to check this
Note 1083305 - P16:STATMAN:Dump in function module RSM_INFOCUBE_WRITE_CHECK
Hope it Helps
Chetan
@CP.. -
SHORT DUMP WHILE EXECUTING DTP.
Hi Gurus,
I have got a short dump while executing DTP the Error is as Follows.
Runtime Error: MESSAGE_TYPE_X.
Reasons for Error: 1.The installation of the SAP GUI on the present server is faulty or obselete
2.There is a error in the application program
And i have sent the sreen shot of the Short Dump to BASIS TEAM and they have replied me that they have to install some patches and it will take some time.
But i have no much time and i have to someway or the other execute the DTP and load the data.
Is there any shortcuts for this i mean to say without the involvement of Basis team that i can do in th BI System
Regards
Amar.Hi Amar,
If the problem is with with System itself, how can we all have a short cut in that case. You may give it another trial, but you have to wait for the patches to be applied. Ask your basis team to get it done ASAP.
Thanks..
Shambhu -
Short Dump while executing New Hire (action type) in PA40
Hi All,
i am getting short dump while executing PA40 for new hire action type can anyone look into this and guide as i am new to HCM.
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program /1PAPAXX/HDR_21000A
Application Component Not Assigned
Date and Time 21.08.2014 14:07:03
Short text
Syntax error in program "/1PAPAXX/HDR_21000A ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPFP50M" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in
include "/1PAPAXX/HDR_21000AO01 " in
line 52:
""LV_LENGTH" has already been declared"
The include has been created and last changed by:
Created by: "HCM04 "
Last changed by: "HCM03 "
Error in the ABAP Application Program
The current ABAP program "SAPFP50M" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "/1PAPAXX/HDR_21000A ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program /1PAPAXX/HDR_21000A :
""LV_LENGTH" has already been declared"
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP Release..... 731
SAP Basis Level. 0007
Application server... "dc-ds-erp"
Network address...... "172.16.23.111"
Operating system..... "Linux"
Release.............. "3.0.13-0.27-default"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "dc-ds-erp"
Database type..... "ORACLE"
Database name..... "ECD"
Database user ID.. "SAPSR3"
Terminal.......... "NLC-HP"
Char.set.... "C"
SAP kernel....... 720
created (date)... "Sep 14 2013 06:16:24"
create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"
Database version. "OCI_112, 11.2.0.3.0, V1, default"
Patch level. 500
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 720
Operating system..... "Linux 2.6, Linux 3"
Memory consumption
Roll.... 0
EM...... 37708200
Heap.... 0
Page.... 106496
MM Used. 4666776
MM Free. 3709976
User and Transaction
Client.............. 210
User................ "HCM03"
Language key........ "E"
Transaction......... "PA40 "
Transaction ID...... "53EF470299AB5D67E1000000AC10176F"
EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"
EPP Connection ID....... 00000000000000000000000000000000
EPP Caller Counter...... 0
Program............. "SAPFP50M"
Screen.............. "MP000000 1000"
Screen Line......... 3
Debugger Active..... "none"
Information on where terminated
Termination occurred in the ABAP program "SAPFP50M" - in
"GET_HEADER_WITH_TCLAS".
The main program was "MP000000 ".
In the source code you have the termination point in line 146
of the (Include) program "FP50MDHD".
Source Code Extract
Line
SourceCde
116
CALL FUNCTION 'HR_HEADER_GET'
117
EXPORTING
118
DHDID = FHD_HID
119
BEGDA = BEGDA
120
TCLAS = TCLAS
121
* Es wird nur einer der folgenden 3 Parameter benutzt.
122
* Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.
123
* Der erste der nicht initial ist wird ausgewertet.
124
* MOLGA =
125
P0001 = P0001
126
PERNR = PSPAR-PERNR
127
IMPORTING
128
PROG = HEADER_PROG
129
DNUM = HEADER_DYNNR
130
EXCEPTIONS
131
HEADER_DEACTIVATED = 1
132
HEADER_UNKNOWN = 2
133
HEADER_GENERATE_DEACTIVATED = 3
134
HEADER_GENERATE_FAILED = 4
135
INTERNAL_ERROR = 5
136
OTHERS = 6.
137
138
IF NOT SY-SUBRC IS INITIAL.
139
* Bei Problemen gibt's eben ein leeres Dynpro.
140
HEADER_PROG = 'SAPMP50A'.
141
HEADER_DYNNR = '0090'.
142
ELSE. " NOT sy-subrc IS INITIAL. "
143
* Dann setzen wir jetzt auch noch das Datum fest.
144
PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.
145
* Und schalten auf Uebergabe der PERNR mit globalen Variablen.
>>>>>
PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).
147
ENDIF. " (ELSE) NOT sy-subrc IS INITIAL. "
148
* Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.Hi,
Error Log: Syntax error
""LV_LENGTH" has already been declared"
please check LV_LENGTH variable declaration.
It may be declared more once! -
Short dump while executing info package in 3.5 data flow?
Hi,
i am getting short dump while executing info package while executing info package. it was working perfectly 2 days back suddenly it is giving this problem. it is a full load for info object text data and i have only 600 records. when i tried with " only info package" it is working perfectly n bringing the data into PSA. But when i use "PSA and the into data target" it is giving short dump.
i replicated Data source and also i activated transfer rules, update rules still it is not working. When i check with another info objects it is working perfectly fine. i dont know what is wrong with only particular info object.
Please find attached short dump.
ThanksHi,
When you load transaction data I think there is a deadlock.
Check in the process overview (transaction SM50) the waiting processes are in program SAPLSENA .
The program SAPLSENA is the lock handler tool.
Also check if ACR is running on this target while your load is happening.
Check in SM12 if there are any lock entries for the Infoobject to which you are loading data and on RSICCONT table .
Try reloading after deleting the locks manually.
Regards. -
Getting a dump while executing the standard report BUSCHDOC
Hi,
I am getting a dump while executing the standard report BUSCHDOC.
I am specifying the following values:-
Application Object : BUPA
Business partner:<some business partner>
Changed on: <some date>
Changed by:<some userid>
Below are the dump details
Short text
CREATE DATA: The specified type "BUSSRCH_401BUPAT" is no valid data type.
Any suggestions to avoid the dump are welcome.
Thanks,
RavindraHi Ravindra,
Can you execute report BUP_BUSSRCHGF_REPAIR and try again ?
Also, go to transaction BUS10, click the button Geneate Selection. On next screen, give Application object = BUPA, Max no. of tables per view = 1.
Regards,
Rishu. -
System Throws short dump while executing data source 2LIS_11_VASCL in RSA3.
Hello Experts,
I got short dump while executing data source 2LIS_11_VASCL in RSA3.
The details are as follow.
When importing object "MC11VA0SCL_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 567.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
I have checked source and target fields and those are of same length and data type.
Could you please give some points why this short dump occurs.
Thanks
Konda ReddyHi,
This error is not between BI and R/3. It is within R/3. You may have setup data and then modified the datasource.
Delete setup data, generate your datasource again. Setup data and try again.
If you are on a live system with data setup after a downtime and you do not want to delete it, then bring your datasource to the original state when you setup data and pull data.
Cheers.... -
Short dump while executing few queries , which has got created on Infoset.
Hi,
We went to BI7.0 upgrade from BW3.x now.
We are getting short dump short dump while executing few queries and work book, which has got created on Infoset.
When i was executing work book where i was geting popup message saying that "Erro ZSD_XST_F00121 is invalid".When i click that message it went to dump.
I was getting this error while executing query on infoset.
We are currently SP Stack 13(Patch level 15).
I found some note 1067918 as per the shortdum,where it is saying that you need to apply SP Stack14(patch level16).
Please some one who had earlier this kind of issue.
I appreciate your answer.Dear Krish,
Yes, It is the patch problem.
We too faced the same issue on Infosets.
Apply SP 15.
Regards,
Ram. -
Dump while Executing the Report HINUINFU
Dear All
I am getting Dump while executing the T.Code - HRPBSIN_IN_INFU (HINUINFU). As per my Configuration it should update the IT0267 and the IT0582. While debugging the We found out that its updating the IT0267 internally. But while reaching to IT0582 its reflecting on the feature 40CEA and the T549D.
here we are having the Telephone Reimbursement for this i copied the Tax code SEXM to ZTEL and assigned to my wage type
I also maintaied this Subtype to the feature 40CEA.
Checked also the IT0582 and its subtype time constraint.
Still the the DUMP persisisting. Please provide the solutions if any of you come across with the same situation.
Thanks & Regards
Srikanth ReddyHi
Issue has been resoved internally. Return value to feature set as HINUOSD0 to MOLGA. hence closing the thread
Regards
Srikanth Reddy -
Short dump while changing the end date of infotype 0167 through PA30
Hi all,
I am getting short dump while changing the end date of infotype 0167(Health Plans) through Tcode PA30.
dump descript is as below
An exception occurred that was not caught.
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_HRPA_VIOLATED_POSTCOND
Date and Time 11.03.2010 07:06:26
What happened?
The exception 'CX_HRPA_VIOLATED_POSTCONDITION' was raised, but it was not
caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_HRPA_SAPUP50R_ADAPTER======CP' has to be
terminated.
thanks
shahidSearch OSS Notes for that.
-
Short Dump while executing ALV Grid.
Hi All,
I m getting a short dump while trying to execute an ALV.
The dump exception is of type
CX_SY_DYN_CALL_ILLEGAL_TYPE class.
The message displayed is : " Call to form 'GI_FIELDCAT' is incorrect .The actual parameter in PERFORM is different data type than requested for form GI_FIELDCAT " .
The part of programe included is as follows:
FORM build_fieldcat .
PERFORM gi_fieldcat USING 'MBLNR' text-014 '1' '20'.
PERFORM gi_fieldcat USING 'ZEILE' text-005 '2' '4'.
PERFORM gi_fieldcat USING 'MATNR' text-006 '3' '18'.
PERFORM gi_fieldcat USING 'MAKTX' text-028 '4' '40'.
PERFORM gi_fieldcat USING 'MATKL' text-029 '5' '40'.
PERFORM gi_fieldcat USING 'BUDAT' text-027 '6' '10'.
PERFORM gi_fieldcat USING 'MENGE' text-026 '7' '9'.
PERFORM gi_fieldcat USING 'DMBTR' text-025 '8' '13'.
PERFORM gi_fieldcat USING 'WAERS' text-011 '9' '5'.
PERFORM gi_fieldcat USING 'RSNUM' text-012 '10' '10'.
PERFORM gi_fieldcat USING 'PSPHI' text-013 '11' '10'.
ENDFORM. " build_fieldcat
FORM gi_fieldcat USING fieldname TYPE slis_fieldcat_alv-fieldname
colmname TYPE slis_fieldcat_alv-seltext_m
colmpos TYPE slis_fieldcat_alv-col_pos
outputlen TYPE slis_fieldcat_alv-outputlen.
wa_fieldcat-fieldname = fieldname.
wa_fieldcat-seltext_m = colmname.
wa_fieldcat-col_pos = colmpos.
wa_fieldcat-outputlen = outputlen.
wa_fieldcat-
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. " gi_fieldcat
Can ayone gimmi a solution for the same.Hi,
Try to change ur code like the below.
Attached: sample code
Building field catalog
PERFORM modify_catlog USING:
'GT_OUTPUT' 'AUART' text-t02 '1',
'GT_OUTPUT' 'KUNNR' text-t03 '2',
'GT_OUTPUT' 'NAME' text-t04 '3',
'GT_OUTPUT' 'KWMENG' text-t05 '4',
'GT_OUTPUT' 'VRKME' text-t06 '5',
'GT_OUTPUT' 'LFIMG' text-t07 '6',
'GT_OUTPUT' 'GEWEI' text-t08 '7',
'GT_OUTPUT' 'VOLUM' text-t09 '8',
'GT_OUTPUT' 'VOLEH' text-t10 '9',
'GT_OUTPUT' 'BRGEW' text-t11 '10',
'GT_OUTPUT' 'UOMGW' text-t12 '11',
'GT_OUTPUT' 'VARCE' text-t13 '12',
'GT_OUTPUT' 'UOMVR' text-t14 '13'.
FORM modify_catlog USING pa_tabname TYPE string
pa_field TYPE string
pa_text TYPE string
pa_pos TYPE string.
CLEAR gs_fieldcatalog.
*Modifying field catalog
gs_fieldcatalog-col_pos = pa_pos.
gs_fieldcatalog-fieldname = pa_field.
gs_fieldcatalog-tabname = pa_tabname.
gs_fieldcatalog-seltext_m = pa_text.
APPEND gs_fieldcatalog TO gt_fieldcatalog.
CLEAR gs_fieldcatalog.
l_repid = sy-repid.
To call function to display ALV output
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
it_fieldcat = gt_fieldcatalog
TABLES
t_outtab = gt_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e000 WITH text-t16.
ENDIF.
Reward if helpful.
Regards,
Ramya -
Dump while executing the report in the background!!!
Hi Experts,
I have created one report which is calling the "HRASR_TEST_PROCESS" (HR form process) thru BDC.
Its running fine while executing via SE38 (foreground) but getting dump while executing from the background with same variant.
The dump is follows,
Short Text
Exception condition "CNTL_ERROR" raised.
ERROR ANALYSIS
A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the exception condition "CNTL_ERROR". Since the exception was not intercepted by a superior program, processing was terminated.
Line Source Code
32 WHEN 1.
33 RAISE CNTL_SYSTEM_ERROR.
34 WHEN 2.
35 RAISE CNTL_ERROR.
36 WHEN 3.
37 class cl_gui_cfw definition load.
38 message id 'DC' type 'W' number cl_gui_cfw=>reason_no_init
39 raising create_error.
40 WHEN 4.
41 RAISE LIFETIME_ERROR.
42 WHEN 5.
43 RAISE LIFETIME_DYNPRO_DYNPRO_LINK.
44 WHEN OTHERS.
45 RAISE CNTL_ERROR.
46 ENDCASE.
47
48 m_container_type = CONTAINER_TYPE_CUSTOM.
49
50 CALL METHOD SET_VISIBLE
51 EXPORTING
52 VISIBLE = '1'
53 EXCEPTIONS
54 CNTL_SYSTEM_ERROR = 1
55 CNTL_ERROR = 2.
56
57 CASE SY-SUBRC.
58 WHEN 0.
59 WHEN 1.
60 RAISE CNTL_SYSTEM_ERROR.
61 WHEN 2.
>>>>> RAISE CNTL_ERROR.
63 WHEN OTHERS.
64 RAISE CNTL_ERROR.
65 ENDCASE.
66
67 m_name = container_name.
68 call method set_window_property
69 exporting property_id = property_name
70 value = m_name
71 keep_cache = 'X'
72 exceptions others = 1.
73 if sy-subrc ne 0.
74 clear m_name.
75 raise cntl_error.
76 endif.
77
78 CALL METHOD ME->REGISTER_CACHED_W_PROPERTY
79 EXPORTING
80 PROPERTY_ID = property_height
81 EXCEPTIONS
Kindly let me know, what is the problem and how can i solve it.
Thanks in advance.
Regards,
HarishHello Zhou,
indeed, as you mention the ALV grid, there are some workarounds in the system, but there is no global solution. For example, the function module REUSE_ALV_GRID_DISPLAY detects internally whether it is called in background mode, and in this case it forwards the call to REUSE_ALV_LIST_DISPLAY which is runnable in background mode, since it creates an ABAP list.
But normally, when using objects of the control framework in your program, you are restricted to dialog mode.
Kind regards,
Rüdiger -
Short Dump while executing costing run or production orders
Hi Guys,
While executing the costing run or production orders saving, we are getting short dump. it is the debugging is showing its fingers at A035 which is related to maintenance of overhead rates.
We have maintained the overhead rates correctly. There is no issue.
This could be some thing related to OSS notes as well.
Just wanted to know if it has got something to do with OSS notes or something else.
Please throw some light in this regard
Thanks in advanceHi,
In what program there is a dump? I mean, what is the log saying?
Regards,
Eli -
Dump while executing the query on MProvider on Stock and Billing
Hi,
I am getting this dump while executing a Query on Multiprovider. Here Multiprovider is on Billing cube(z-cube) and 0IC_C03 cubes. In the report , I have KF of both cubes. I am sure I never faced this type of problem in version 3.5. It seems we are going back day by day because of version 7.0.
A:
1) I am not getting any error if I take Kfs of only Billing cube in the
report on the multiprovider.
2) But I am getting this problem by taking only KF from 0IC_c03 on this multiprovider .
3) And also this problem is not raising in any queries(ofcourse same type) of those 2 cubes.
4) Here Fiscal Variant is constant filter, and User will enter the Fiscal year.
5) In the Columns area ,I have taken 12 selections each one restricted with one CALMONTH2.
6) in Rows part I have 3 selections. Here 2 selections have Billing KF and other selection has Blockd Stock qty KF.
B:
The above dump is not raising if I take 12 selections on columns with a restriction on 0CALMONTH with Customer exit varible , but different offsets in selections. Here the Customer exit variable gets April of the User entered Financial year as the value. But the problem is For all columns it is giving same Value for Stock KF even though we have different values in the system. Surprisingly issue is , Sales figures are comming proper.
I am on Version 7 and patch 13. And I am using Querydesigner 3.5.
Dump message: GETWA_NOT_ASSIGNED
<i>Short text:
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "RSDRC_NCUM_ROUTINES" had to be terminated because it has come across a statement that unfortunately cannot be executed.
keywords:
"GETWA_NOT_ASSIGNED" " "
"RSDRC_NCUM_ROUTINES" or "RSDRC_NCUM_ROUTINES"
"FILTER_SELDR"</i>
Thanks and Regards,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma
Message was edited by:
Anil Kumar SharmaOK,
I come back to my question: you said "<i>But the problem is For all columns it is giving same Value for Stock KF even though we have different values in the system</i>"
Can you say to which period this value correspond?
This looks like you are missing some characteristic identification in your multi.
Can you assess that?
Do you have the same time periods in both cubes? I mean, do you have at least the periods used in your RKF / query in both cubes? Would you mind pasting your identification for time IObjs from table RSDICMULTIIOBJ?
please see hereunder my identification for a sales and stock multicube
INFOCUBE OBJVERS IOBJNM PARTCUBE PARTIOBJ
ZMC021 A 0CALDAY ZICRT_C07 0CALDAY
ZMC021 A 0CALMONTH ZICRT_020 0CALMONTH
ZMC021 A 0CALMONTH ZICRT_C07 0CALMONTH
ZMC021 A 0CALMONTH2 ZICRT_020 0CALMONTH2
ZMC021 A 0CALMONTH2 ZICRT_C07 0CALMONTH2
ZMC021 A 0CALQUART1 ZICRT_020 0CALQUART1
ZMC021 A 0CALQUART1 ZICRT_C07 0CALQUART1
ZMC021 A 0CALQUARTER ZICRT_020 0CALQUARTER
ZMC021 A 0CALQUARTER ZICRT_C07 0CALQUARTER
ZMC021 A 0CALWEEK ZICRT_C07 0CALWEEK
ZMC021 A 0CALYEAR ZICRT_020 0CALYEAR
ZMC021 A 0CALYEAR ZICRT_C07 0CALYEAR
ZMC021 A 0FISCPER ZICRT_020 0FISCPER
ZMC021 A 0FISCPER ZICRT_C07 0FISCPER
ZMC021 A 0FISCPER3 ZICRT_020 0FISCPER3
ZMC021 A 0FISCVARNT ZICRT_020 0FISCVARNT
ZMC021 A 0FISCVARNT ZICRT_C07 0FISCVARNT
ZMC021 A 0FISCYEAR ZICRT_020 0FISCYEAR
ZMC021 A 0FISCYEAR ZICRT_C07 0FISCYEAR
note that here ZICRT_020 is a monthly stock cube.
hope that helps...
Olivier.
Maybe you are looking for
-
When I added a third phone to my Itunes account I messed up somewhere. I want to unsync my contact's list. Actually I'd like to unsync everything and have each phone independent. But the contact list is the most important. All my contact's now sh
-
Outlook: "Send Immediately when connected" not working for Word 2010
When i disable the option in Outlook "Send Immediately when connected" the messages are placed in the Outbox until i send them manually. But when i want to send a Word 2010 document from within Word 2010 by E-Mail the message is send immediately. Is
-
Assigning default values to root and subnode attributes
Hello, I created a BO with a root node. In order to assign some default values after a root instance is created, I've implemented a determination. Everything is working as expected. When the instance is created (and only then) the init method is proc
-
Vmtools on Solaris 10 10/08 (u6) client on an ESX 4.0 not running
Hi there I have about 30 Solaris Servers running on an ESX 4.0 Server. Since we updated from ESX 3.5 to 4.0, we also have to update the mvtools. Now I have an interesting issue: after the removal of the old vmtools and the installation of the new set
-
Multicast IP on 1742 Smart Camera
I have setup a smart camera on a switched ethernet system. Cam IP--10.128.xx.xx PLC IP--10.128.xx.xx PC with browser to view web server--10.128.xx.xx The Camera ONLY NEEDS TO COMMUNICATE to these other 2 IP's. How to I limit this or shut off multi-ca