Should your ipad be off when charging and how long does it take
Should ipad be on or off when charging and how long does it take?
scgirl195 wrote:
Should ipad be on or off?
You can turn it off and charge it or turn it on and charge it. No need to turn it off actually.
scgirl195 wrote:
how long does it take?
It depends on the charge level before start charging.
Similar Messages
-
Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display? -
HT4060 How long does it take to charge your ipad once the battery is all gone?
How long does it take to charge your ipad 4th generation with retina display once the battery is all gone?
About 5 hours using the 12W charger that came with it.
-
HT4060 how long does it take to charge the battery for a mini Ipad from 1% to 100% ?
how long does it take to charge a mini Ipad battery completely from 1% to 100%?
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
How long does it take for a cancellation fee to process? I just cancelled my annual subscription to adobe audition today and the customer service agent say the cancellation payment went through of $74.90, but i see no charge on my credit card. On the website it says my cancellation is effective in march 16, 2015. So when will i be charged?
Hi ,
I'm very sorry to hear of the problems you have had moving to pay as you go.
Please can you give customer service a call and ask to speak to the pay monthly retentions team who will be able to fix this issue for you.
Click here for contact details.
Thanks
James -
I sent my iPod in to repair and they still haven't received it. I sent it in about 5 days ago? how long does it take to get their and about when do you get it back?
We are Users, like yourself. We do not work for Apple. Contact them directly at the location you turned in your unit. Depending on parts supply stock and work load, completion time can change day to day.
-
how long does it take to back up your iphone...it was moving along great and then someone texted me and it doesnt seem to be moving....the little circle by my Tammys Iphone is turning....
Only you can decide. Read this article and decide which one is best for you:
http://support.apple.com/kb/HT5262
Cheers,
GB -
How long does it take to charge my debit card when i buy an app?
i bought a couple of apps but its hasnt come out of my bank account yet...how long does it take?
You will probably get better answers to this and other development questions in Apple's developer forums.
Best of luck. -
"How long does it take to do a dist-upgrade on your distro?"
Yesterday there was a question in the USALUG.org "How long does it take to do a dist-upgrade on your distro?"
This question was a good question, so I decide to make the ultimate test. I have a lot of computers standing here around, and remembered that on one of them was have already Archlinux installation. I was right, when I booted, the system check said me, that the system was 253 days not checked anymore. I got so excited that I forgot to check was it one of my 0.7.2 Gimmick or 0.8 Voodoo installations.
The Computer
Dell OptiPlex GX110
[jada@arch-02 ~]$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 797.452
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat p se36 mmx fxsr sse up
bogomips : 1596.45
clflush size : 32
[jada@arch-02 ~]$
I used the following command for the update
$ time pacman -Syu
The Test
first update pacman
[root@arch-02 jada]# pacman -Syu
warning: current locale is invalid; using default "C" locale
:: Synchronizing package databases...
core 23.8K 80.0K/s 00:00:00 [#####################] 100%
extra 310.5K 292.3K/s 00:00:01 [#####################] 100%
community 341.0K 295.8K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace mktemp with core/coreutils? [Y/n] y
:: Replace mpg321 with extra/mpg123? [Y/n] y
warning: bind: forcing upgrade to version 9.4.2-1
warning: cpufrequtils: forcing upgrade to version 002-3
warning: dnsutils: forcing upgrade to version 9.4.2-1
warning: flex: forcing upgrade to version 2.5.33-4
warning: opera: forcing upgrade to version 9.25-2
:: pacman has detected a newer version of the "pacman" package.
:: It is recommended that you allow pacman to upgrade itself
:: first, then you can re-run the operation with the newer version.
:: Upgrade pacman first? [Y/n] y
resolving dependencies... done.
looking for inter-conflicts... done.
Targets: libarchive-2.4.11-1 libdownload-1.3-1 pacman-3.1.1-1
Total Package Size: 1.19 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
libarchive 314.8K 253.4K/s 00:00:01 [#####################] 100%
libdownload 49.4K 97.9K/s 00:00:01 [#####################] 100%
pacman 855.2K 460.4K/s 00:00:02 [#####################] 100%
checking package integrity... done.
cleaning up... done.
(3/3) checking for file conflicts [#####################] 100%
(1/3) upgrading libarchive [#####################] 100%
(2/3) upgrading libdownload [#####################] 100%
(3/3) upgrading pacman [#####################] 100%
>>> The makepkg.conf syntax has changed, please note the new format
>>> when merging the pacnew file with your old configuration.
>>>
>>> The pacman.conf default file has changed. Please update your
>>> config to use the single mirrorlist, and any additional files
>>> in /etc/pacman.d/ (core, extra, etc.) can be deleted.
>>>
>>> The location of sync DBs has moved from /var/lib/pacman/ to
>>> /var/lib/pacman/sync/ for several reasons. To delete older
>>> DBs, please run pacman -Sc and follow the instructions.
>>> You will also have to run pacman -Sy to refresh the sync DBs.
>>>
>>> abs is no longer included; please install the 'abs' package
>>> to use abs. You may need to edit abs.conf to re-enable repos.
[root@arch-02 jada]#
restart pacman 3.1.1 and update the packages
[root@arch-02 jada]# time pacman -Syu
:: Synchronizing package databases...
core 23.8K 80.3K/s 00:00:00 [#####################] 100%
extra 310.5K 261.1K/s 00:00:01 [#####################] 100%
community 341.0K 302.5K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace mktemp with core/coreutils? [Y/n] y
:: Replace mpg321 with extra/mpg123? [Y/n] y
warning: bind: forcing upgrade to version 9.4.2-1
warning: cpufrequtils: forcing upgrade to version 002-3
warning: dnsutils: forcing upgrade to version 9.4.2-1
warning: flex: forcing upgrade to version 2.5.33-4
warning: opera: forcing upgrade to version 9.25-2
resolving dependencies...
warning: dependency cycle detected:
warning: bash will be installed before its glibc dependency
warning: dependency cycle detected:
warning: readline will be installed before its glibc dependency
warning: dependency cycle detected:
warning: ncurses will be installed before its glibc dependency
warning: dependency cycle detected:
warning: db will be installed before its coreutils dependency
looking for inter-conflicts...
Remove: mktemp mpg321
Total Removed Size: 0.08 MB
Targets: ncurses-5.6-6 readline-5.2-7 bash-3.2.033-2
kernel-headers-2.6.23.1-2 tzdata-2007k-1 glibc-2.7-7 attr-2.4.39-2
acl-2.2.45-2 cracklib-2.8.10-5 gcc-libs-4.2.3-3 db-4.6.21-2
pam-0.99.9.0-2 shadow-4.0.18.2-2 coreutils-6.10-2 libtool-1.5.26-1
mpg123-1.2.0-1 fontconfig-2.5.0-1 zlib-1.2.3-4 libpng-1.2.24-1
cairo-1.4.14-1 libtasn1-1.3-1 lzo2-2.02-3 libgpg-error-1.6-1
libgcrypt-1.4.0-1.1 opencdk-0.6.6-1 gnutls-2.0.4-1 libcups-1.3.5-1
pcre-7.6-2 glib2-2.14.5-1 pango-1.18.4-1 gtk2-2.12.7-1
binutils-2.18-5 gmp-4.2.2-2 mpfr-2.3.1-1 gcc-4.2.3-1
glproto-1.4.9-1 libgl-7.0.3rc1-1 mesa-7.0.3rc1-1 acroread-8.1.2-1
dialog-1.1_20071028-1 pciutils-2.2.8-3 alsa-utils-1.0.15-2
e2fsprogs-1.40.4-1 apr-1.2.12-1 gdbm-1.8.3-5 apr-util-1.2.12-1
openssl-0.9.8g-2 apache-2.2.8-1 jack-audio-connection-kit-0.109.0-1
kde-common-3.5.8-3 libxmu-1.0.4-1 qt3-3.3.8-6.1 arts-1.5.8-2
diffutils-2.8.1-5 gawk-3.1.6-2 m4-1.4.10-3 autoconf-2.61-3
perl-5.8.8-9 automake-1.10.1-2 filesystem-2007.11-6 avahi-0.6.20-3
bftpd-2.1-1 bin86-0.16.17-3 dnsutils-9.4.2-1 bind-9.4.2-1
bison-2.3-4 bluez-libs-3.24-1 libusb-0.1.12-3 bluez-utils-3.24-2
bridge-utils-1.2-2 bzip2-1.0.4-3 cairomm-1.4.6-1 cmake-2.4.8-1
cpio-2.9-3 sysfsutils-2.1.0-4 cpufrequtils-002-3
device-mapper-1.02.24-1 popt-1.10.6-3 cryptsetup-1.0.5-5
csup-20060318-5 cups-1.3.5-1 curl-7.18.0-1 dbus-qt3-0.62-3
dcron-3.2-3 dhcpcd-3.2.0-1 dmapi-2.2.8-3 libxml2-2.6.31-1
docbook-xsl-1.73.2-1 dosfstools-2.11-2 dvd+rw-tools-7.0-4 ed-0.8-3
enlightenment-0.16.8.11-1 gnome-desktop-2.20.3-1 eog-2.20.4-1
libidl2-0.8.10-1 mozilla-common-1.1-2 xulrunner-1.8.1.11-1
epiphany-2.20.3-1 eventlog-0.2.5-2 ghostscript-8.61-1
gnome-keyring-2.20.3-1 libsasl-2.1.22-5 libldap-2.3.39-2
smbclient-3.0.28A-1 gnome-vfs-2.20.1-1 libdjvu-3.5.20-1
poppler-0.6.3-1 poppler-glib-0.6.3-1 evince-2.20.2-1 evms-2.5.5-5
libsoup-2.2.104-1 evolution-data-server-1.12.3-1 exiv2-0.15-1
faad2-2.6-1 grep-2.5.3-3 sed-4.1.5-3 fakeroot-1.9.2-1 fbset-2.1-2
file-4.23-1 file-roller-2.20.3-1 findutils-4.2.32-1
firefox-2.0.0.12-1 flashplugin-9.0.115.0-2 flex-2.5.33-4
font-bitstream-speedo-1.0.0-4 font-misc-ethiopic-1.0.0-4
font-misc-meltho-1.0.0-4 freeglut-2.4.0-3 freetype1-1.3.1-4
glib-1.2.10-7 gtk-1.2.10-8 imlib-1.9.15-4 libstroke-0.5.1-2
fvwm-2.4.20-2 gail-1.20.2-1 gc-7.0-2 gdb-6.7.1-1
gtksourceview2-2.0.2-1 libgnomecups-0.2.3-1 libgnomeprint-2.18.3-1
libgnomeprintui-2.18.2-1 python-2.5.1-5 pygobject-2.14.1-1
pygtk-2.12.1-1 gedit-2.20.4-1 gen-init-cpio-2.6.17-3
gettext-0.17-1 librsvg-2.20.0-1 gimp-2.4.4-1 gkrellm-2.3.1-2
glibmm-2.14.2-1 gmime-2.2.16-1 gnokii-0.6.22-3
gnome-menus-2.20.3-1 libwnck-2.20.3-1 gnome-panel-2.20.3-1
gstreamer0.10-0.10.15-1 gstreamer0.10-base-0.10.15-1
gstreamer0.10-alsa-0.10.15-1 gucharmap-1.10.2-1 libgtop-2.20.1-1
gnome-applets-2.20.1-1 metacity-2.20.2-1 libbeagle-0.3.0-3
nautilus-2.20.0-4 gnome-control-center-2.20.3-1
gnome-python-2.20.1-1 gnome-python-desktop-2.20.0-3 guile-1.8.3-1
gnome-games-2.20.3-1 gnome-power-manager-2.20.2-1
tcp_wrappers-7.6-8 gnome-session-2.20.3-1 gtkmm-2.12.3-1
gnome-system-monitor-2.20.2-1 vte-0.16.12-1 gnome-terminal-2.18.4-1
gnome-utils-2.20.0.1-2 gnupg-1.4.8-1 libassuan-1.0.4-1
gnupg2-2.0.8-1 gpgme-1.1.6-1 gpm-1.20.1-7 groff-1.19.2-4
grub-0.97-9 gstreamer0.10-cdparanoia-0.10.15-1
gstreamer0.10-gnomevfs-0.10.15-1 gstreamer0.10-ogg-0.10.15-1
gstreamer0.10-vorbis-0.10.15-1 gtkhtml-3.16.3-1 gutenprint-5.0.2-1
vi-7.1.228-1 vim-7.1.228-1 gvim-7.1.228-1 gzip-1.3.12-4
hal-info-0.20071212-1 hdparm-7.7-3 usbutils-0.73-5 wget-1.11-1
hwd-5.3.2-1 hwdetect-0.9-1 icewm-1.2.35-1 ifenslave-1.1.0-3
imagemagick-6.3.8.0-1 intltool-0.37.0-1 iproute-070710-3
iptables-1.3.8-2 iputils-20070202-4 isdn4k-utils-3.2p1-3
jfsutils-1.1.12-2 jre-6u3-2 kbd-1.12.20070827-2 kdelibs-3.5.8-4
lm_sensors-3.0.1-1 xorg-xauth-1.0.2-1 kdebase-3.5.8-3
qscintilla-qt3-1.7.1-2 kdebindings-3.5.8-2 libgphoto2-2.4.0-4
poppler-qt3-0.6.3-1 kdegraphics-3.5.8-3 sqlite3-3.5.6-1
libopensync-0.34-1 kdepim-3.5.8-2 klibc-1.5-3 klibc-extras-2.3-1
klibc-udev-116-2 klibc-module-init-tools-3.2.2-1
mkinitcpio-0.5.17-2 module-init-tools-3.2.2-5 kernel26-2.6.24.1-2
less-418-1 lftp-3.6.3-1 libao-0.8.8-2 orbit2-2.14.12-1
libbonobo-2.20.3-1 libcdio-0.79-1 libelf-0.8.10-3 libevent-1.3d-2
libgdiplus-1.2.6-1 libmikmod-3.1.12-1 libmysqlclient-5.0.51-2
libpcap-0.9.8-2 libsamplerate-0.1.2-4 libtar-1.2.11-3
libxfont-1.3.1-2 licenses-2.3-1 lilo-22.8-2 links-2.1pre33-1
logrotate-3.7.5-1 lua-5.1.3-1 lvm2-2.02.33-1 mailx-8.1.1-5
make-3.81-3 man-1.6f-2 man-pages-2.77-1 mdadm-2.6.4-1
mono-1.2.6-1 mutt-1.5.17-4 mysql-clients-5.0.51-3 mysql-5.0.51-3
nano-2.0.7-1 net-tools-1.60-13 netkit-ftp-0.17-4
netkit-telnet-0.17-7 nfsidmap-0.20-2 portmap-6.0-2
nfs-utils-1.1.0-3 ngrep-1.45-4 nmap-4.53-1 ntp-4.2.4p4-4
openssh-4.7p1-6 openvpn-2.0.9-3 opera-9.25-2 orca-2.20.3-1
patch-2.5.4-4 pcmciautils-014-3 php-5.2.5-3 pilot-link-0.12.3-1
pine-4.64-4 pkgconfig-0.22-3 procps-3.2.7-4 libx86-0.99-1
vbetool-1.0-2 pm-utils-0.99.4-1 qt-4.3.3-4 poppler-qt-0.6.3-1
postgresql-libs-8.2.6-1 postgresql-8.2.6-1 ppp-2.4.4-6
procinfo-19-2 psmisc-22.6-1 qca-2.0.0.svn744387-1.1 qca-qt3-1.0-1
qca-tls-1.0-5 qscintilla-2.1-3 reiserfsprogs-3.6.20-3
rp-pppoe-3.8-2 rsync-2.6.9-4 samba-3.0.28A-1 screen-4.0.3-5
seahorse-2.20.3-1 shared-mime-info-0.23-1 sudo-1.6.9p12-1
sysklogd-1.5-1 syslog-ng-2.0.6-1 util-linux-ng-2.13.0.1-2
sysvinit-2.86-4 taglib-1.4.0.svn744384-1 tar-1.19-2 tcl-8.5.1-1
tcpdump-3.9.8-1 tcsh-6.15.01-1 thunderbird-2.0.0.9-2 tk-8.5.1-1
totem-plparser-2.21.91-1 totem-2.20.1-3 ttf-dejavu-2.23-1
udev-116-3 unichrome-dri-7.0.3rc1-1 unzip-5.52-3
vorbis-tools-1.1.1-7 which-2.19-2 whois-4.7.24-1
wireless_tools-29-2 wireshark-0.99.7-1 wpa_supplicant-0.5.9-1
xaw3d-1.5-4 xchat-2.8.4-2 xf86-input-evdev-1.2.0-1
xf86-input-joystick-1.3.1-1 xf86-video-ati-6.7.197-2
xf86-video-mga-1.9.100-2 xf86-video-nv-2.1.7-1
xf86-video-s3virge-1.9.1-9 xf86-video-savage-2.1.3-2
xf86-video-sis-0.9.4-2 xfsprogs-2.9.4-2 xfsdump-2.2.46-3
wavpack-4.41.0-3 xine-lib-1.1.10-1 xinetd-2.3.14-3
xkeyboard-config-1.1-1 xmms-1.2.11-1 xorg-server-1.4.0.90-6
xorg-xinit-1.0.7-3 xscreensaver-5.04-2 yelp-2.20.0-3
zenity-2.20.1-1
Total Download Size: 743.90 MB
Total Installed Size: 748.87 MB
Proceed with installation? [Y/n]
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
ncurses-5.6-6-i686 1738.2K 518.0K/s 00:00:03 [#####################] 100%
readline-5.2-7-i686 271.5K 228.3K/s 00:00:01 [#####################] 100%
bash-3.2.033-2-i686 407.1K 299.1K/s 00:00:01 [#####################] 100%
kernel-headers-2.6.2... 621.6K 376.8K/s 00:00:02 [#####################] 100%
tzdata-2007k-1-i686 610.7K 329.0K/s 00:00:02 [#####################] 100%
xorg-server-1.4.0.90... 7.4M 659.0K/s 00:00:11 [#####################] 100%
xorg-xinit-1.0.7-3-i686 14.4K 56.9K/s 00:00:00 [#####################] 100%
xscreensaver-5.04-2-... 8.0M 655.2K/s 00:00:13 [#####################] 100%
yelp-2.20.0-3-i686 603.4K 356.7K/s 00:00:02 [#####################] 100%
zenity-2.20.1-1-i686 1896.3K 546.6K/s 00:00:03 [#####################] 100%
:: Retrieving packages from community...
freetype1-1.3.1-4 119.9K 129.5K/s 00:00:01 [#####################] 100%
gkrellm-2.3.1-2 724.3K 411.1K/s 00:00:02 [#####################] 100%
xmms-1.2.11-1 1945.1K 557.0K/s 00:00:03 [#####################] 100%
checking package integrity...
(349/349) checking for file conflicts [#####################] 100%
( 1/349) upgrading ncurses [#####################] 100%
( 2/349) upgrading readline [#####################] 100%
( 3/349) upgrading bash [#####################] 100%
( 4/349) upgrading kernel-headers [#####################] 100%
( 5/349) upgrading tzdata [#####################] 100%
( 6/349) upgrading glibc [#####################] 100%
(340/349) installing wavpack [#####################] 100%
(341/349) upgrading xine-lib [#####################] 100%
(342/349) upgrading xinetd [#####################] 100%
(343/349) upgrading xkeyboard-config [#####################] 100%
(344/349) upgrading xmms [#####################] 100%
(345/349) upgrading xorg-server [#####################] 100%
:: Could not detect nvidia-utils on system
:: Will attempt to use built-in libwfb
(346/349) upgrading xorg-xinit [#####################] 100%
(347/349) upgrading xscreensaver [#####################] 100%
(348/349) upgrading yelp [#####################] 100%
(349/349) upgrading zenity [#####################] 100%
real 56m46.062s
user 4m25.013s
sys 1m46.520s
[root@arch-02 jada]#
And for your tread question.
How long does it take to do a dist-upgrade on your distro?
one hour
real 56m46.062s
user 4m25.013s
sys 1m46.520s
After reboot the system loads all new applications with out any problem. Later I replaced the intel-video driver "xf86-video-i810 1.7.4-6" with the driver xf86-video-intel 2.2.0-2. No problems at all.
Archlinux rocksJaDa wrote:Archlinux rocks
definitely. By contrast, here's a regular upgrade on my debian box -- out of the blue it's having some problem with one of the packages, and it's turning into a regular recursive nightmare.
root@moe:~ # apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies.
E: Unmet dependencies. Try using -f.
root@moe:~ # apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies...Done
The following extra packages will be installed:
exim4-base exim4-daemon-light
Suggested packages:
exim4-doc-html exim4-doc-info eximon4 libmail-spf-query-perl
The following packages will be upgraded:
exim4-base exim4-daemon-light
2 upgraded, 0 newly installed, 0 to remove and 64 not upgraded.
1 not fully installed or removed.
Need to get 0B/1391kB of archives.
After unpacking 8192B of additional disk space will be used.
Do you want to continue [Y/n]?
Preconfiguring packages ...
dpkg: exim4-daemon-light: dependency problems, but removing anyway as you request:
exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however:
Package exim4-daemon-light is to be removed.
Package exim4-daemon-heavy is not installed.
Package exim4-daemon-custom is not installed.
dpkg: error processing exim4-daemon-light (--remove):
Package is in a very bad inconsistent state - you should
reinstall it before attempting a removal.
Errors were encountered while processing:
exim4-daemon-light
[ Rootkit Hunter version 1.3.0 ]
File updated: searched for 152 files, found 131
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@moe:~ # apt-get install exim4-daemon-light
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies.
exim4-daemon-light: Depends: exim4-base (>= 4.69) but 4.68-2 is to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
root@moe:~ #
It's so "delicate" and temperamental compared to the no-nonsense, straightforward approach of Arch. If one little thing is off, the entire system has a hissy-fit and won't do anything until you hunt the internet high and low searching for a solution, encountering all the debian hawks along the way who are ready to rip your head off at the first suggestion that debian isn't directly from god and could have a problem. Imo, Arch is the best linx distro hands down. Nothing else even comes close. -
How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.
It should not take very long. Up to thirty seconds tops depending on your Wi-Fi network.
Try rebooting your Wi-Fi router. Turn off the router for 30 seconds then turn it back on. After the router completes its startup routine and indicates a good connection to the internet start you iPad again and see if it will connect.
If you still have problems you might try connecting to a different Wi-Fi network. Maybe one at your local coffee shop or library. -
HT4623 trying to sign in apple id and password done--now says loading --how long does this take???
entered id and password --now says loading--how long does this take????
wilsonfromtx wrote:
entered id and password --now says loading--how long does this take????
With regard to what? I assume that since the link connected to your question was from the "How to update your iDevice" kb article, you are talking about seeing this behavior after you updated the iPad.
So, if that's the case, it really shouldn't take but a minute or so, if it even takes that long. If this has been going on for minutes and minutes, the update process is stuck now. You can try restarting the iPad and see if the iPad behaves normally. That might be all that you need to do to set things right again. If restarting just takes you back to this page loading again, you can try rebooting the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I changed my password after the acct. was disabled. We had to dispute some charges and got it worked out. The new password won't work and thats what we were told to do. How long does it take for the new password to take effect? And is there something else we should do?
Contact itunes support
-
Should my screen is cracked, how long does it take to get it fixed on apple repair shop?
Should my ipad screen is cracked, how long does it take to fix it on apple repair shop?
We are all end-users like you and not Apple employees or agents. Time to repeir depends of the repair facility. Contact several to see which has the best turn-around time for such repairs.
-
How long does it take to update Apple Tv. Its been more then two hours and its only in step 1 of 2?
Assuming your credit card info is accurate the entire transaction should just take a few seconds.
You don't need to download a new version of QuickTime Player 7 Pro. All you need is the email confirmation of your name and registration number. Enter that into your existing version of Player 7 and the pro features are "unlocked". -
I bought an iPhone 5 from someone, how long does it take for his Apple ID to come off
I bought an iPhone 5s from someone second hand, he had put it back to factory settings but when I tried to use it it asked for his Apple ID and password, I contacted him to ask for him to delete his id from the phone, how long does it take after he does that for me to be able to set up the phone with my details?
This is what should have been done:
http://support.apple.com/kb/ht5661
If the seller didn't do the above, you need to get the seller to do this. If you don't, you won't be able to re-activate the phone. It will be useless to you.
I suspect you may have been scammed.
Maybe you are looking for
-
Phone not working after software update!!
i dont know if anyone could help me but i recently done a software update for my blackberry torch 9800 and after it upddated it hasnt been the same the screen isnt the same some of my icons are missing and nothing is right and i done a software downg
-
Hi Guys: Is there any t-code or table i can check Vendor No, Vendor name and Date of the last payment made for all the vendors belong to one company code? In LFB1, i can find the vendor details under the single company code, but i can not find any fi
-
Selecting correct settings for a new project
I'm about to start my first project using Elements and the final output for the project will be need to be a H264 or a "WMV" file which which can be uploaded to an FTP site. It will also be displayed in front of a group on a screen (size is 7.5'x10'
-
Why can I receive but not send messages through Mail?
I recently installed a wireless router (linksys). I can send mail at the local coffee shop, yet here at home I can't. I know it's something very simple, but I'm giving up...and asking for help in fear of tweaking the settings beyond my knowledge. I g
-
Recovery of earlier document version
I have erroneously overwritten a document and would like to recover the former version. Can anybody help?