Show user library on a Mac OS boot disk running as external drive

I've had an internal Mac OSX Mavericks boot drive start to fail and am in the process of backing up the user data on this drive.
The HDD has been removed from the computer as it wouldn't start up. So far I have been able to mount this drive as an external drive on another mac and I'm in the process of transfering the data to a new drive.
My question is how can I access the User/Library on the failing drive when it's being run as an external drive on another mac?
I tried looking and the view setup for this user folder but there's no option to select 'show library', guess that's because the drive is not running as the normal boot drive!
Thanks in advance to anyone that can help.

Using the Terminal....
Depending on the name of the external drive, select the correct option. Insert your User name for YOU.
Drive name: Mac HD Clone
chflags nohidden /Volumes/Mac\ HD\ Clone/Users/YOU/Library
Drive name 3TB Seagate Clone MTL
chflags nohidden /Volumes/3TB\ Seagate\ Clone\ MTL/Users/YOU/Library
Drive name Mavericks
chflags nohidden /Volumes/Mavericks/Users/YOU/Library

Similar Messages

  • How do I move my library from a mac to a PC using an external drive?

    I have a Mac and have a large library of music (+120GB) which is stored on an external hard drive. I have a windows PC in my basement and I have purchased a 2nd external drive (200GB drive) and copied my music library (music files and iTunes Library.itl file) onto it. I want to attach the 2nd drive to the windows PC and use it to run my music library on that machine.
    I recognize that I could use the the sharing feature in iTunes to share the music over a network w/o the 2nd drive but for a number of reasons assume that this will not work for the sake of this question.
    What is the best way to add this drive/library to the PC? (the PC has iTunes installed, but no music in the library)
    Can I just hold the shift key down while launching iTunes and then select the library on the external drive? Will this be a problem given that the iTunes Library.itl file was created in OS X (file location format differences, etc)?
    If the above is a problem, should I just add the music folder (and all sub folders) to the library on the windows machine using File-> Add Folder to Library ...butI do not want to make a duplicate copy of the music given that the library is so large (it is larger than the HD on the PC machine)..so I would have to make sure that the "Copy files to iTunes music folder when adding to library" is unchecked, but then after the initial import I would want iTunes to keep any subsequent new additions to the library in the same place as the rest of the music and also keep the files/folders organized, etc. Can this be accomplished by changing the itunes music folder location? If I go the "add music folder" route, what are the steps and the right sequencing to add the music properly (w/o copying ) and then leaving iTunes set up to store/organize new music additions properly?
    Way too many words I know...any help very much appreciated.

    It sounds like you mostly have everything down on how to do it. The one thing I don't know about is how to transfer the database file from Mac to Windows (or the other way around). I have not tried it nor seen reports from anyone who has tried it, so I am not sure if it will work or not.
    As to your last question, plug the external into the Windows machine, open iTunes. Change preferences to use the iTunes Music folder on the external drive. Now add your files. Since they are already in that location and in the order iTunes would put them in, they should be added and not moved or copied again. Since you changes the storage location preference to that location, future additions will go into the same folder on the external.
    If you can, please let us know how the Mac to Windows database transfer worked out. Most people either are going from Mac to Mac or Windows to Windows or simply don't care about ratings, play counts, play lists, etc. so starting over with a new database file is no big deal. So I am curious about getting the database file to translate across systems. You might try the XML file first since that should be universal. The other one may be in a Mac specific format.
    Patrick

  • I'm a new MAC user and I'm trying to transfer my iTunes music files to my Mac, however when I attach the external drive that contains the music files, they aren't visible on the MAC (but they are visible on my old PC).  How do I get my music loaded?

    I'm a new MAC user and I'm trying to transfer my iTunes music files to my Mac, however when I attach the external drive that contains the music files, the music files aren't visible on the MAC (but they are visible on my old PC).  How do I get my music transferred?  I have already exported the purchased music from the iTunes library, but I have thousands of songs from my private CD collection that I had previously loaded through iTunes.

    Paragon Software has the most reliable NTFS driver for Mac
    tips on importing and organizing, transferring from Windows etc
    http://www.apple.com/support/itunes
    http://www.ilounge.com

  • I am trying to boot Ubuntu 12.4 on my iBook G4, but am having trouble getting my iBook to recognize the boot disk in the CD Drive.  Why?

    I am trying to boot Ubuntu 12.4 on my iBook G4, but am having trouble getting my iBook to recognize the boot disk in the CD Drive. 
    I have pressed "C" during boot to force it to boot from the Optical Drive.  It boots normally.
    I have pressed "option" to get the boot menu.  The only option available is my hard disk drive.
    I have pressed "option""command""shift""delete" at the same time during boot to force it to skip booting the hard disk.  I get a blinking smily face/question mark for a while, then it shows the boot menu, at which point the only available option is my hard disk drive. 
    In system preferences in OS X I have looked to change the boot drive, but the only option, again, is the hard disk.
    Can I not boot from the Optical Drive?
    Why?

    Hello,
    From the link I provided it says:
    Nearly all open-source software is available to download from the Ubuntu repositories, but the amount of proprietary software available for PowerPC linux is limited. You will have the same version of Firefox, LibreOffice, etc as other architectures.  
    Notable absentees are: Chrome/Chromium, Adobe Flash (although open-source alternatives are available, see below), Wine (however Qemu can be used, see below), ndiswrapper, proprietary video drivers and Dropbox (but, you can use Ubuntu One).
    I do recall it being very limited when it came do downloading Linux software that supported PPC.
    You wouldn't be any better off than using firefox or safari on Mac OS X 10.4.11.
    If your looking for a faster and more compatible web browser then I would suggest the following, which I've recently found very useful on Mac OS X 10.4
    http://www.floodgap.com/software/tenfourfox/
    Hope this helps.

  • Can't boot from my firewire external drive

    I have a 80 Gb LaCie firewire drive where I have installed (since Phanter) an operating system. All things were OK until I updated the system to OS X 10.4.10 in my G3 iMac (slot-loading). Since then I was unable to boot from the external drive. I had updated the drive's firmware, installed OS X 10.4.10 in it, but nothing has solved my issue. Can anyone help me with this?
    Helder Monteiro
    iMac G3 slot-loading   Mac OS X (10.4.10)   iBook G4 - 10.4.10

    Helder,
    I apologize if I sounded like I was finding fault with your use of English, which I think you use very well. My own abilities with any foreign language are embarrassingly poor ... & I'm not that great with my native English one either!
    My concern was that we were not communicating well enough for me to understand your situation well enough to suggest anything that would not make things worse. I'm still not entirely sure of that but let me review what I believe it to be before proceeding:
    You have a LaCie external hard drive that both your iMac & PowerBook recognize when either is started up from its internal copy of 10.4.10. With either one, the drive mounts & you can read & write files on the external without problems. The only problem is neither Mac will start up from the external drive, which has a copy of 10.4.10 installed on it in the same way as with your Mac's internal drives, that being booting from the Tiger installer disk, installing the base version of the OS on it & then updating it to 10.4.10 with some succession of Apple updates downloaded from Apple. You have also tried the PPC version of the 10.4.10 combo update. None of this has resolved the problem.
    If this is all true & accurate, then I suggest you start by attaching the drive to one or the other Mac while booted normally & seeing if the external drive appears as a choice in System Preferences > Startup Disk. You do not have to select it if appears; the test is just to see if the Mac recognizes it as having a valid OS version. If it does appear in the list, hover the mouse pointer over it until a popup box appears, which will tell you the version of the OS installed.
    If it does not appear in the list, it means there is no valid version of the OS installed. If it does, you could try selecting it & restarting, but I suspect from what you have said, it won't work -- the Mac will display a question mark for a while on startup, eventually give up on the drive & start from the internal one. (If so, don't forget to reset the startup disk to the normal one to speed up future restarts.)
    Either way, launch Disk Utility & run the "Repair Disk" function on the external drive. If it finds anything wrong, continue to repeat the repair until it passes. If it reports failure, stop & report that here before continuing.
    If the drive was recognized in the system preference, also run the "Repair Permissions" step. (if not, it is unlikely this will be an option.) If the drive passes both tests now, try booting from it again by whatever method you prefer.
    If it does not work now, I think you will have to reinstall the OS. If you have room on the drive, an Archive & Install will probably work. If not, you will need to consider "cleaner" install methods, which we can discuss if you wish.
    Good luck!

  • HT201250 Can I use Time Machine on two different Macs to back up to one external drive?

    Can I use Time Machine on two different Macs to back up to one external drive?
    I have one 1T Western Digital backup drive that works well with Time Machine and my MacBook Pro.  I now want to back up my wife's MacBook Air using Time Machine on her Mac and want to know if I can use the same WD external drive or if I need to get a 2nd back up drive?  If I can use one external drive for the two Macs do I need to do something special on the drive or will Time Machine do it automatically?

    Yes. You will need to configure Time Machine preferences on each computer to backup to the same drive. Note that you cannot connect the backup drive to both machines at the same time.

  • Macs or mac mini work with blu ray external drives even XL DISC CAPACITIES

    macs or mac mini work with blu ray external drives (BURNERS) even XL DISC CAPACITIES like 128GB?

    https://discussions.apple.com/docs/DOC-2881

  • How to move my boot disk to an external Thunderbolt disk?

    So my wife and I both have Late 2010 iMac's.  Her's died.  We got a new thin-style iMac one and restored her from time machine.  It was perfect - except for one thing.  The 1TB disk drive that's not replacable in her iMac *****.  It's just the 5400 RPM model and it's REALLY sluggish.  She's been using it a year now, and complains about the speed of her computer.
    I know there are USB3 and Thunderbolt disk options out there - so I'm thinking that perhaps moving her boot disk to an external thunderbolt disk makes total sense - a little big disk for instance, is light-years faster - and she'll be able to work better with that.
    The question is - how do I move her boot disk over to an external drive?  I'd also want to make sure the external disk is the default boot disk for this until it's time to replace the thing - is that possible?

    This is meant to address several comments:
    Of course, preferring a 7200 vs. 5400 rpm drive is a matter of personal preference (as is preferring an MBP over an iMac or whatever). My personal preference: the best quality (and that includes speed) I can afford/decide to spend for the intended task). I also do not buy drives that do not include their own power source.
    And - to me - the 5400 is noticeably slower in everyday tasks. I had a malfunctioning external 7200 rpm drive; the mfr sent me another under warranty. I did not know that they had switched to 5400 rpm drives until I did my first clone to it. I was surprised that it seemed to take longer than usual, so I tested it: did one clone each from the same machine to two drives (same mfr, one 5400 and the other 7200) using CCC (did not use the machine or add/delete anything in between). The result: the clone to the 7200 drive finished in 38 minutes, the clone to the 5400 drive took 50 minutes. To me, that is a noticeable difference; I believe that cloning can be considered an everyday task.
    The fact that the OP's drive is sluggish may, indeed, have another/different cause. I addressed his question whether or not he would be able to run his iMac from an external source. And yes, he can if he wishes to do so - I outlined the how-to steps.
    For me personally, a 5400 drive will not do - for someone else, it might be just right. You may not perceive the difference in speed, but I do. Since that is a matter of preference and everyone has their own and is therefore entitled to their opinion - mine may be different than yours; however, that does not make it less valid.
    That is my last post re. the differences of opinion; I'll be happy to discuss any technical issues related to the OP's concerns.

  • Can't show User/Library in external drive

    I can set my Mac to show Library in Users on the main drive (terminal or keystroke) but NOT on an external drive...
    How can I access User/Library on external drives?

    Check that you’re in the correct folder and entering the exact text posted.
    If you’re using the Go to Folder command and providing Library, it’ll open the one in the current folder. If you provide ~/Library/, it’ll always open the one in your home folder.
    If you’re using the chflags command, the path will look like /Volumes/volumename/Users/username/Library/ and not /Users/username/Library/.
    (115061)

  • Mac Mini boots and runs very slo-o-o-wly

    I bought my Mom a Mac mini with Intel Core Solo processor. I live in another city, and was last in front of the computer in February. I came for a visit yesterday and last night noticed the screen seemed to be frozen on the screen saver. I turned the monitor off and went to bed. When I came to look at the computer this morning it was frozen at a Mozilla Firefox upgrade install. I learned from my Mom that my sister, who is not particularly computer literate, used the computer last, about two weeks ago, to try and download some pictures. I'm writing for help, using my Powerbook.
    I've spent the past five hours trying to get this mini to start and operate normally. From total shutdown to booted up and "ready" ( I use the term loosely) for use takes about 15 minutes. The first thing I noticed was the Logitech Bluetooth mouse was not working. I changed the batteries and now it seems to be working, although through every one of the approx. 30 reboots I've done today, the system initially cannot find the mouse, but manages to work after about four minutes of a spinning cursor. To launch an application, say, System Preferences, takes about five minutes from mouse click to mouse click.
    I tried going to Disk Utility to try and repair the hard drive, but Repair Disk is grayed out. I tried using Software Update, figuring it would optimize the disk in the process. After downloading a list of available updates, I tried running only the Mac OS X update (OS X 10.4.8 now), but it broke with an error message saying the volume could not be updated. There is a file on the desktop named "file001.zip", which leads me to believe there is a corrupted file on the disk somewhere, but when I drag it to the trash I get an error message saying it cannot be deleted.
    I pulled out the manual, and tried booting from the original install disk. I followed the instructions and tried repairing the disk from there, but I got an error message saying that wouldn't work either (memory getting kind of hazy; I've been at this quite a long time). In other words, nothing I try works. My deepest suspicion is that something is wrong with a volume, partition, partition table, partition map, or something like that. On the desktop is a disk icon named "Macintosh HD", and if I'm not mistaken it should have a user name instead, just like on my PB the same icon is named "Jims HD". I would be grateful for some other ideas or avenues to explore. I'm leaving town in the morning so if it's going to come down to erasing and reinstalling from the original disks, I'd better get started on that soon. Thanks.
    Jim

    The easy bit first - the 'Macintosh HD' label on the drive icon is perfectly OK. You can change the name to just about anything you want, but by default the drive is called Macintosh HD, and doesn't change to the user's name (or anything else) without the user's intervention.
    As to the other issues - it does sound suspiciously like the drive has issues, or the MacOS install is malfunctioning. Unfortunately, you can't repair the drive you boot from, so while you can run Disk Utility from the hard drive and 'verify' it, to see if it reports any errors, you can only repair it by booting from the original install disk that came with the system (or another viable boot volume if you have one on an external drive for example).
    It seems to me that unless the system has already accumulated user data and files, the easiest way to deal with this is simply to insert the original install disk and reboot with the C key down, then do an Erase and Install. Note that this will delete all data, so if there is anything on the system of importance, it will need to be backed up. After the erase and install, and before installing any software, run the system for a while to make sure it's OK, including Disk Utility to verify the hard drive is fully functional.
    If you prefer to take the diagnostic approach, the first step is to boot to the original install disk and run Disk Utility from there, with the repair disk option selected for the internal drive. You will likely need a wired keyboard to get the system to boot from the optical drive because with many BT/cordless keyboards, the driver isn't loaded until AFTER the point at which the C key boot modifier stops being recognized.
    If you can't get the system to boot to the install disk, or if Disk Utility reports errors it can't repair, post again with as much detail specific to the issue as you can.

  • Rebuild Mac Pro boot disk on a Mac Mini - possible?

    Hello-
    A friend has a Mac Pro 8-core with 10.6.2. The hard drive is showing some issues so I would like to rebuild the installation from scratch on a new drive. I have an intel mac mini and I'm wondering if it is possible to create a new boot disk (via external firewire enclosure) and do all the updates and software installation (Final Cut Studio, Adobe suite, etc) on the mac mini and then simply drop the new drive into the mac pro. Or is the software installation hardware specific?
    Thanks for your help,
    Mark

    you shouldn't do that. first, there may be hardware problems due to difference in available hardware drivers if the mac pro is very new. also, if you do this the system will be identified everywhere including system profiler as mac mini. if you need to do it do it straight on the mac pro.

  • My late 2012 mac mini boots slow with new ssd drive

    So here is the situation.  I purchased a 128gb ssd drive, installed it a usb enclosure, formatted it to Mac OS Extended (Journaled), cloned it with carbon copy cloner 3,   used the option key during boot up and selected the ssd drive and it booted my mac mini and it functioned perfectly.  I than tested it for dozens of reboots and it worked fine.  I then took apart my mac mini and removed the original hard drive and installed the new ssd drive.  When I boot to the ssd drive it still takes 47 to 53 seconds just like the old drive.  Aren't ssd drives supposed to be a lot faster?
    My solution or tip is as follows; The reason it takes so long to boot is because the mac mini doesn't know you replaced the old drive and it is looking for it during the boot process.  Finally it can't find the drive so it boots to the ssd drive.  All you have to do to correct this is click on "system preferences", select and click on "startup disk" and select your ssd drive and click on "restart".  After these steps your mac mini will now boot in about 17 seconds.  Issues solved. 

    Yes, my solution fixed the issue.  I went from a 47 to 53 second boot time to a 17 second boot time.  The ssd drive is significantly faster than the original drive that came with my late 2012 mac-mini.   This is my first post and I wasn't sure how to post this as a tip.  I have another tip regarding usb 3.0 hubs. 

  • Mac Pro will not boot from cd or external drive

    My Mac has an issue whith the boot drive, and I would like to format the drive and reinstall OS-X Mountain Lion and then use Time Machine to resore the Data. When I try to boot my Early 2009 Mac Pro (OS-X 10.8) using the option key, it loads the scrren that allows me to choose among the bootable drives. Once I choose either an external drive or CVD, it loads to the apple screen, stays there for about 5 minutes, then loads the OS on the main drive... Any ideas would be greatly appreciated.
    Bill Mueller

    At first I was just going to say it sounds like you have a bad optical drive, but then you had to go and say that it also won't boot from a HDD.
    That just makes things a whole lot worse.
    Start by removing the side cover and checking the RAM to see if any of the LEDs are lit up indicating bad RAM. Usually if there's any bad RAM found, it will just automatically disable that stick, but maybe yours isn't for some reason.
    Look for any other LEDs that may be lit. Generally speaking, the only time you should see an LED (outside of the power LED) lit consistently is if there's a problem.
    You should also see if you can get Apple Hardware Test to run, which may or may not find some problem.
    But sorry to say, it's sounding very suspiciously like a bad logic board.
    One other thing to try, is putting the SL drive into a different slot. So if you were putting it in slot 2, try slot 3 or 4. If you just have a bad SATA port, you might be able to just work around that until you get a new system.
    If by chance this system is still under warranty, do not walk, do not pass go, do not collect $200, RUN to the nearest AASP or Apple store to make it THEIR problem to sort out.

  • Mac SE FDHD with dead HDD - boot and run from floppy drive alone? HDD type?

    Hello!
    I picked up a Mac SE FDHD a few months back - a model with a Superdrive and hard drive, as well as 4 MB of RAM. It came with a keyboard and mouse, but no floppies of any kind. Upon testing, I discovered that the hard drive did not work - the "flashing question mark folder" appears at startup, and the disk setup utility on the system 6 install disks I created using a more modern mac can't detect it. I don't hear HDD seek sounds either. Everything else works fine, as far as I can tell. The reason I want to use this old Mac is simply to boot it up and run a few favorite old programs (such as MacPaint and many old games), so I don't want to put too much money into it.
    I discovered my parents still owned a old, 170 MB "LaCie Tsunami" SCSI external drive, used with our long-failed Mac II, and decided to use as the SE's boot drive, as a cheap workaround to avoid buying a "new" drive. However, after a rather odd turn of events (described below for information purposes), it turns out that the 50-pin SCSI drive itself functions, but in the process, I think I killed the enclosure. Unless this drive can replace the internal drive of the SE, (or get lucky and find a compatible drive somewhere), I'll need to run the SE from its single floppy drive.
    I figure that since the original Mac had 128k of memory, a single 800k floppy, and no hard drive, and yet can still run OS 7, the SE should be able to run system 6 from floppies somehow. The question is how? Is there a tutorial online somewhere on how to set this up?
    Furthermore, as far as the hard drive is concerned, is the SE's internal drive a standard 50 pin SCSI HDD, and thus likely compatible with the one from the LaCie?
    Thanks for any suggestions, and for helping this "Old time Mac Newbie" out!
    -Dan
    PS: What happened to the LaCie drive - for information purposes:
    WHen I attached to the LaCie drive to the SE and booted the OS 6 install disks, t worked - OS 6 installed to it just fine. However, it turns out that a "dormant" copy of Norton utilities reactivated when I booted to the SCSI drive, and encrypted the disk's partition table. (Why it was not encrypted BEFORE installing and booting OS 6, I don't know) Having not used the drive for 17 years , and thus not knowing the password, I had to reformat it. I have a Sawtooth G4 with an Apple SCSI card - but no cable that would go from the PCI card's SCSI port to the external enclosure. THus, I removed the drive from the enclosure, mounted it in the G4 internally, and formatted it as Mac OS Standard (with OS 9 drivers) using Mac OS 10.3. Upon re-installing the drive in its SCSI enclosure, I found that it no longer works - Norton was erased, but the SE gives me a "Sad Mac" icon upon boot. Furthermore, after borrowing the correct SCSI cable, I found the enclosure now kernel panics my G4 when attached. The drive itself, when mounted internally in the G4, still functions perfectly. Thus, it seems that either the enclosure is dead, or something about OS X's reformat is renders the HDD incompatible with the enclosure...

    "I removed the drive from the enclosure, mounted it in the G4 internally, and formatted it as Mac OS Standard (with OS 9 drivers) using Mac OS 10.3."
    I just re-checked Disk Utility's format options under Panther and only see "Mac OS Extended (Journaled)" or "Mac OS Extended." I don't see an option for formatting Mac OS Standard. Are you certain that you formatted the drive as a Mac OS Standard (HFS) volume? If it's a Mac OS Extended (HFS+) volume, that would explain why it won't work when connected to the SE. When using external SCSI enclosures having a hard drive or optical drive, I always opted to connect an "active" SCSI terminator to the unused SCSI port on the enclosure. It seemed to provide stability, because I never had a problem with any of them. Does the LaCie enclosure have a built-in termination switch or do you plug in a terminator to the opposite SCSI port on the back? As for installing/using the 170 MB hard drive in the SE, it must have a jumper installed on its TE pins, if it's the last device connected to the SE's SCSI ribbon cable. Additionally, the HDD must have a unique SCSI address, The factory default is usually 0, which doesn't necessarily require a jumper. If another address is desired, a jumper or two installed across specific pins will accomplish that. If the LaCie enclosure had a switchable SCSI address button on the back (you change it by pressing in with a ball point pen), there were small wires from it that were connected to the drive's address pins in a specific way. Did you disconnect/re-connect these when you re-installed the drive in the enclosure? Also, if the enclosure has a termination switch, did you re-connect its wires to the drive's TE pins?

  • Can Mac Mini boot XP from an External HD ? ? ? ?

    Hi All,
    Just a quick question.
    I have a recently deceased PC. RIP.
    I was able to salvage my boot drive with much of my media content.
    I would very much like to buy a Mac Mini to use as a PC / Media Center.
    Can a Mac Mini boot Windows XP from an external drive?????
    thanks to any who can answer this question,
    or possibly point me to more info .
    best regards

    Hi,
    without the preperations to be made, that are outlined in the link I gave, Windows always tries to read and write certain files during bootup, which it can't find when you 'only' have a Windows on an external HD.
    I only know of these instructions to get Windows on external HDs to work.
    If it weren't for games you like to play, I would suggest to have a look at the 'Virtualization' apps like Parallels or VMWare Fusion.
    But these aren't good for playing games.
    Sorry
    Stefan

Maybe you are looking for