Single Master, multiple details add-rows problem

Hi, hope to get a replay at least this time (last threads have gone unreplied :-( )
We've built a master-multiple details table. Everything in visualization has worked OK until we've got the need to add rows to each
detail table separately (i.e. for same master row, one could add N rows to one detail and M rows to the other).
Keeping the standard "addRows" table buttons doesn't work because the same addRows event is fired for both the subtables, so
adding a row in one just adds a row also to the other, until a dedlock situation is reached.
So we tried to set a different button so we could intercept the originator table (SOURCE_PARAM) in the processForm but here we're facing
some big problems.
First at all, the methods and names are correct: we've tried to use the same code (cut and paste) for the table putting the inner table "outside"
and buttons are working as expected.
But when the detail table is put back "within" the master, what happens is that the AM method called by pFR in the Controller is executed, so
we reach the end of the processFormRequest, but at this time something happens and we get the exception error message reported more below.
I've read that via the VL it is not the original detail VO instance which is showed, so wonder if the error has something to do with that...
So to summarize:
1) all the objects exist and are ok, and the VL is defined OK; and indeed the standard AddRows management works (as said, the problem
is that we need to differentiate two different details...)
2) the methods are OK as they work as soon as the details are put outside the master table.
Any suggestion ? Do we need to refer to a specific details VO instance ???
Thanks in advance. Rgds.
GN
## Detail 0 ##
oracle.apps.fnd.framework.OAException: oracle.jbo.InvalidObjNameException: JBO-25005: Nome oggetto per il tipo Oggetto vista non valido
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1145)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1408)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2704)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1707)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:511)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:432)
     at OA.jspService(OA.jsp:33)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
oracle.apps.fnd.framework.OAException: oracle.jbo.InvalidObjNameException: JBO-25005: Nome oggetto per il tipo Oggetto vista non valido
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1145)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1408)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2704)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1707)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:511)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:432)
     at OA.jspService(OA.jsp:33)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)

Any suggestion on this ? What I need, in other words, is to put two details table under the same master table...

Similar Messages

Example of how to create a master-multiple detail PDF report using BI Pub

Hi,
Are there any examples out there on how to do this? Basically for each master record from table A,
need multiple related detail records from table B AND multiple related detail records from table C.
Ie. A is master to B and A is master to C.
For master-single detail reports, writing a single query that joins master to detail works fine,
but for master-multiple detail reports, I don't see how this approach will work.
Thanks,
Jed

You MIGHT have a better response if you ask this question in the BI Publisher forum...: BI Publisher
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.

How to combine multiple Details section rows in my report

Hello,
I am currently creating a report which will display employee details, which includes first name, last name, home phone, cell phone and Email.
I get my First Name and Last name from the "Employees" table but all other info is situated in the "CommunicationLinks" table.
The tricky part which I am having issues with is the Home Phone, Cell Phone and Email are all under the same field in this table, the field is called "DisplayAs".
These 2 tables are linked together by taking Employees.LinkID and linking it to CommunicationLinks.LinkIDParent, which are matching linkids.
The only issue that I have, is for example, if you look at the screenshot provided, I have 5 details section that gets populated for the same employee.
How can I combine all these 5 records to only one?
The homephone, cellphone and email field have formulas created for them, the formula is as follow.
This example below is for the HomePhone field, the others have different type assigned to them
If {CommunicationLinks.Type} =1 then
{CommunicationLinks.DisplayAs}
else ""
Homephone, Cellphone and Email are all different types but uses the same field "DisplayAs".
I also tried creating a subreport for each of these fields but seems to give me the same results.
Any help would be really appreciated.
If you have any other questions please let me know. See attached screenshots for reference.
Thank you in advanced.
Jocelyn

Easier way without working in SQL:
1. Group by a field that is unique to the employee.
2. Suppress the employee group header and the details sections.
3. Create a couple of formulas:
{@ClearVariables}
WhilePrintingRecords;
StringVar HomePhone := "";
StringVar CellPhone :="";
StringVar Email := "";
Put this formula in the employee group header - even though the section is suppressed, it will evaluate.
{@SetVariables}
WhilePrintingRecords;
StringVar HomePhone;
StringVar CellPhone;
StringVar Email;
if {CommunicationLinks.Type} =1 then
HomePhone := {CommunicationLinks.DisplayAs};
else if {CommunicationLinks.Type} = <type for cell> then
CellPhone := {CommunicationLinks.DisplayAs};
else if {CommunicationLinks.Type} = <type for email> then
Email := "";
Put this formula in the details section - it will evaluate even though the section is suppressed.
{@HomePhone}
WhilePrintingRecords;
StringVar HomePhone
(Do the same for Cell Phone and Email. Note that there is no semi-colon at the end of this one!)
Put these formulas and all of the rest of the employee data in one or more Employee group footer sections.
-Dell

BC4J: Master with multiple details

Hi,
I have a requirement to display a data form that consists of fields from 3 entities - one master and 2 details. I have view objects for each of the entities.
I was wondering how best to model this:
Should I have one Master VO pointing to 2 different view links (one to each detail VO)?
Or can I have a single view link that models master-multiple-details (not sure how I can do this using the ViewLink wizard)?
Any other approach I should consider?
Thanks,
Niranjan

I don't believe you could create a Master with two details frame using wizard. you need to write/alter some code manually. I did this a lot in my application, but as i mentioned with some manually coding.
here is the general idea:
1- create the view links for master-detail1 and master-detail2 separately.
2- Edit your application module using wizard.
(right click on application module and select Edit Tab). if you did the first step successfully, You should see your master entity and details(as master's children) on left side of wizard frame. Then transfer them to the right side.
3- Create a frame for master-detail1 using wizard.
4- create another frame(dummy frame) for master-detail2 using wizard.
5- copy all codes for detail2 from your dummy frame(step 4) to frame on step 3.
6- Now you need to alter the code in frame on step 3, to locate the detail2 on that frame.
7- Now the dummy frame on step 4 is useless, you can delete it.
Hope this note be clear and help you.
null

Example of how to create a master-mutiple detail BI Publisher 10.1 Report

Hi,
Are there any examples out there on how to do this? Basically for each master record from table A,
need multiple related detail records from table B AND multiple related detail records from table C.
Ie. A is master to B AND A is master to C.
For master-single detail reports, writing a single query that joins master to detail works fine,
but for master-multiple detail reports, I don't see how this approach will work.
Thanks,
Jed

Sure, here is one (hand edited, but shows some structure).
Detail rowset2 relates to rowset1 via STDINV_ID.
Detail rowset3 related to rowset1 via STUDY_ID and STDINV_ID.
Thanks for your consideration.
-Jed
<?xml version="1.0" encoding="UTF-8"?>
<DATA>
<ROWSET1>
<ROWSET1_ROW>
<STUDY_ID>105</STUDY_ID>
<STUDYNAME>TEST293</STUDYNAME>
<INVNAME>Flinstone, Fred</INVNAME>
<COUNTRY>USA</COUNTRY>
<STDINV_ID>3721</STDINV_ID>
<ROWSET2>
<ROWSET2_ROW>
<STDINV_ID>3721</STDINV_ID>
<TEMPLATESENT>11/02/2006</TEMPLATESENT>
<FINALCONTRACTRECEIVED>11/13/2006</FINALCONTRACTRECEIVED>
<CONTRACTTYPE>Main Agreement</CONTRACTTYPE>
<DRAFTRECEIVED></DRAFTRECEIVED>
<EFFECTIVEDATE>11/13/2006</EFFECTIVEDATE>
<EXPIRATIONDATE></EXPIRATIONDATE>
<CONTRACTSTATUS>Executed</CONTRACTSTATUS>
</ROWSET2_ROW>
</ROWSET2>
</ROWSET1_ROW>
<ROWSET1_ROW>
<STUDY_ID>105</STUDY_ID>
<STUDYNAME>TEST293</STUDYNAME>
<INVNAME>Bell, Taco</INVNAME>
<COUNTRY>USA</COUNTRY>
<STDINV_ID>3157</STDINV_ID>
<ROWSET2>
<ROWSET2_ROW>
<STDINV_ID>3157</STDINV_ID>
<TEMPLATESENT>07/12/2005</TEMPLATESENT>
<FINALCONTRACTRECEIVED></FINALCONTRACTRECEIVED>
<CONTRACTTYPE>Main Agreement</CONTRACTTYPE>
<DRAFTRECEIVED></DRAFTRECEIVED>
<EFFECTIVEDATE>04/05/2006</EFFECTIVEDATE>
<EXPIRATIONDATE></EXPIRATIONDATE>
<CONTRACTSTATUS>Executed</CONTRACTSTATUS>
</ROWSET2_ROW>
</ROWSET2>
<ROWSET3>
<ROWSET3_ROW>
<STUDY_ID>105</STUDY_ID>
<STDINV_ID>3157</STDINV_ID>
<EXPIRATION>10/02/2007</EXPIRATION>
<IRBNAME>Big Kahuna IRB</IRBNAME>
</ROWSET3_ROW>
<ROWSET3>
</ROWSET1_ROW>
<ROWSET1_ROW>
<STUDY_ID>105</STUDY_ID>
<STUDYNAME>TEST293</STUDYNAME>
<INVNAME>King, Burger</INVNAME>
<COUNTRY>USA</COUNTRY>
<STDINV_ID>3112</STDINV_ID>
<ROWSET2>
<ROWSET2_ROW>
<STDINV_ID>3112</STDINV_ID>
<TEMPLATESENT>07/10/2005</TEMPLATESENT>
<FINALCONTRACTRECEIVED>11/21/2005</FINALCONTRACTRECEIVED>
<CONTRACTTYPE>Main Agreement</CONTRACTTYPE>
<DRAFTRECEIVED></DRAFTRECEIVED>
<EFFECTIVEDATE>11/23/2005</EFFECTIVEDATE>
<EXPIRATIONDATE></EXPIRATIONDATE>
<CONTRACTSTATUS>Executed</CONTRACTSTATUS>
</ROWSET2_ROW>
<ROWSET2_ROW>
<STDINV_ID>3112</STDINV_ID>
<TEMPLATESENT></TEMPLATESENT>
<FINALCONTRACTRECEIVED></FINALCONTRACTRECEIVED>
<CONTRACTTYPE>Amendment 1</CONTRACTTYPE>
<DRAFTRECEIVED></DRAFTRECEIVED>
<EFFECTIVEDATE>04/01/2008</EFFECTIVEDATE>
<EXPIRATIONDATE></EXPIRATIONDATE>
<CONTRACTSTATUS>Executed</CONTRACTSTATUS>
</ROWSET2_ROW>
</ROWSET2>
<ROWSET3>
<ROWSET3_ROW>
<STUDY_ID>105</STUDY_ID>
<STDINV_ID>3112</STDINV_ID>
<EXPIRATION>08/16/2011</EXPIRATION>
<IRBNAME>Top Notch Healthcare</IRBNAME>
</ROWSET3_ROW>
</ROWSET3>
</ROWSET1_ROW>
</ROWSET1>
</DATA>

Weird Problem with Add Row Button in Master Detail Page

I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen?

I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen?

Field values erases when Add Row button is pressed in Master Detail Form

Hi,
I am using APEX 4.0. There is a master-detail form in a page, this has 5 rows in it by default, has a Add row and a Delete button. I face two problems now:
1. When the values are entered in all the 5 rows, that are in default, and Add Row button is clicked, these values are entered in the DB, but they are erased from the interface. Means when user clicks Add row he don't see the old values he has entered. All new empty rows are only seen. This might confuse the user. How can I resolve this.
2. The values are saved to the DB only when the Add row button is clicked, so suppose if the user enters some wrong values in the default rows and after he clicks Delete button, all the field values are erased. Is there a way to delete only that particular row? (Please note: the values are not saved to the DB, unless the Add Row button is clicked)
Please let me know how to resolve these 2 issues.
Thanks.

So let me get this straight:
You enter information into a tabular form and then click the add row and the data is being duplicated from the prior row or being inserted into the table ?
Thank you,
Tony Miller
Webster, TX
A lady came up to me on the street, pointed at my suede jacket and said "Do you know a cow was murdered to make that jacket?"
"I didn't know there were any witnesses", I replied " Now I'll have to kill you too"

Add Row in Master Detail Form

Hi all,
I wonder if there is a way to just Add Row in the master detail (tabular) form without actually submitting the page. So if user has updated any existing row before clicking the Add Row button, the update should not be submitted by Add Row button click. If this is possible, then I want to submit (insert) the newly added row as well as any updates made to the existing rows when user click the "apply changes" button.
Any luck?
Thanks for the help.
Milaan

Hi Andy,
Thanks for your response. Here is what I am doing... On submit I am calling another page (popup) for user to enter electronic signature. So when they add row (which is a submit), it calls the electronic signature page popup, and only upon entering the signature (nuisance at this point) it adds a row in the tabular form. Is there a way to change this behavior to not to submit the page every time user click Add row button?
Thnx
Milaan

Master table / detail table: Problem refreshing the content

Hi,
I have a Master table/detail table on my page. When I add a new row to the master or detail table, the new row is inserted in the database, but not shown in the ADF Tables on the page. After restarting the OC4J the ADF Tables show the correct data, including the new rows.
While dropping the collection on my page there were one methodIterator and two accessorIterators created.
In several tutorials the solution for the refresh problem is to change the chacheResult parameter of the methodIterator to false. But this causes in "No row found for rowKey:null" errors.
An other solution should be to create a new invokeAction with the id "tableRefresh" and the corresponding RefreshConditions. This doesn't helps, too.
So how could I solve this problem? I want to update/refresh the master and detail table, after I inserted a new row.
Thanks,
Thomas

Hi,
thanks for your answer.
Sorry, but I forgot to say, that I am using Jdev 10.1.3.1, Toplink, ADF and EJB3.
I think I will give some further informations about the scenario. I created the m/d table by drag-and-droping the object out of the data control palette on site A. Each row stores a goLink item, which navigates to a new page B. After creating and saving the new entry the user navigates back to the page with the m/d table (page A). Storing the new entry is handled by an action in the page B managed bean.
Now the question: How could I re-execute in page B backing bean the iterator which is stored in page A? Could this be handled by an invokeAction? Or is it possible to get access to the iterator used and stored on another page (definition)?
Thanks,
Thomas

Examples of Master with multiple details

Hi Leo,
I want to create Master with multiple details
I have been trying for the similar example (Master with multiple details) for long time.
It seems in the following link, you have mentioned that you have done such examples.
Examples/Demos of APEX applications with Master with Multiple Details.
Can you please share the solution to my emaid address [email protected]
Or can anybody help me to get such solution with examples step by step.
I would highly appreciate for any help.
Thanks.

Ok, so here's the rundown.
Create a page with one "master" html region. In that region create your standard text/date/etc. items. Make sure that one of these is a hidden key field that is the key linking the master and details portions. Use a calculation to pre-populate the field from a sequence (or whatever uniqueness generator you choose). It is important to generate this key up front for the processing.
Next I created one report region for each detail table I wanted to link in. Make sure to count the total number of fields you want to work with and that the total is LESS than 50. This is critical. The report should be selecting the columns from APEX_COLLECTIONS for display and manipulation on the screen. It is best to explicitly associate these to the Javascript column numbers now. I used a process to pre-populate my detail entry areas with default values for ease. I also included a button to add a row to each area, but you have to be careful here to use a good combination of form attributes so that the page refreshes don't SUBMIT yet.
Once you have a report region generated from APEX_COLLECTIONS, you have to create the update processes that pull the information from the user modifications into the collection. This is the trickiest part of the whole thing. You have to use the APEX_COLLECTION.UPDATE_ITEM method, and you have to refer to the JavaScript column numbers for the source value and the collection column number for the destination. It is really easy to get these confused - I advise putting this all into a document or on a whiteboard for reference.
Once you have the update processes written (I prefer writing one update process per detail section), write your processes to write the data to the database. Again, I suggest one process for each detail table. Trigger them to fire on submit.
I also suggest creating a debug page to display all of the various collections and to help keep things straight. Once you have one detail area working, it is easier to get the others working.
If you need actual code snippets, let me know and I'll see what I can do.

INSERTED Table - When it gets populated with single or multiple rows?

Hi,
I'm trying to create a trigger which then insert to a table. i'm wondering when does the INSERTED table gets populated with single or multiple rows?
Should I always assume that the INSERTED Table will contains several rows? What does the scope of the INSERTED table in the trigger, isn't based on the user session?
The reason why i asked this is because as far as i know inserted table may contain several table when the trigger fires which is why I use cursor to insert records in the table ( there's a behind why i use cursor).
But if the inserted table will only contain a single record during the session of the trigger then i can avoid the cursor.
Thanks.

But since we control the transaction process and we know for a fact that user will only be able to save a record one at a time, do we still expect multiple rows? I just want to have a clear concept on the INSERTED table.
...and then the DBA or someone else sees fit to enter a number of rows directly from a query window. And don't laugh. That is bound to happen sooner or later.
However, just because this can (and will) happen does not mean that you need to handle it on equal footing with the normal case user entering data through the application. What you cannot permit yourself to is to drop the DBA case on the floor, that is write
the trigger as if there would either be single-row inserts and produce incorrect results for multi-row inserts.
But, yes, allowing yourself to use a cursor, if you want to reuse the existing stored procedure is feasible. That is also the more drastic solution suggested by Tom to add an explicit check that disallows multi-row inserts.
Finally, permit me to comment on this:
Additionally, it's difficult to use the code below as i need to pass the identity id of tbl_A to tbl_B
You can use the OUTPUT clause to capture the values, but that requires that you have something you can map the identity values to in the columns you insert, and this is not always the case. However, there is a lot simpler solution to the problem: don't
use IDENTITY. IDENTITY is one of these over-used and over-abused features in SQL Server. You need it when you want to support high-concurrency inserts, because rolling your own requires a serialisation point. But with a moderate insertion frequency, IDENTITY
only gives you headache.
Erland Sommarskog, SQL Server MVP, [email protected]

Add Multiple Detail Items Using the Same Query String Parameter

I am using InfoPath 2010 and SharePoint 2010.
I have 2 forms libraries - Expense and Expense Details.
The 2 libraries are linked via a custom site column Expense ID.
The Expense form contains the main header type info you would typically find on an expense report; e.g., name, purpose, department, etc.
The Expense Details form contains multiple detail expenses related to the main expense report such as airfare, rental car, etc.
I have created a page that displays an expense report with all of the related expense detail items.
The page contains a link to add a new expense detail and passes the Expense ID of the Expense form to the Expense Detail form.
This all works fine. The problem comes in after the first expense detail form is submitted.
I can successfully submit the first detail item. However, the expense detail form loses the Expense ID that was passed to it after the first expense detail form has been submitted.
The parameter still shows in the URL but the detail form no longer shows the value of the parameter.
What do I need to do in order to be able to add multiple expense detail items using the same Expense ID that was passed to the form?
I have tried using a Submit Behavior of Open a new form, Close the form, and Leave the form open.
None of these options give me what I need. Thanks for your help.
pam

Laura Rogers Blog
In case anyone stumbles upon this looking for an answer. Laura Rogers has the answer found in the comments section of her blog above. It’s not the best but it
does work. You have to add an extra Info Path Web Form for it to work. I know, you can roll your eyes.<o:p></o:p>
Steps.<o:p></o:p>
1. Add Query String<o:p></o:p>
2. Add the extra Info Path form to the page. This form will be a hidden on the page and will receive the value from the query string.<o:p></o:p>
3. Add your original Info Path form and have it receive a parameter from the hidden Info Path form.<o:p></o:p>
Now, when you hit save and it opens a new form the 3 Info Path form will function properly. <o:p></o:p>

Master with multiple details

(JHeadstart release 10.1.2.) I can make a master with multiple detail pages work (displayed on the same page or different pages), except under one condition. Assume the following situation:
Master: View object A based on entity A
Detail 1: View object B based on entity B with a modified WHERE clause
Detail 2: View object C based on entity B (yes, same entity object as view object B) with a WHERE clause different than the one for view object B
A one-to-many view link exists between view object A and view object B, and another exists between view object A and view object C. The query for each of the view objects is standard (i.e., no expert-mode queries). The master and the two detail view objects (via their respective view links) are assigned to an application module.
I created a JHeadstart application structure file for the application module with Struts and UIX. I added view object A as the top group (table-form layout). I next added view object B as a detail group (form layout, same page) beneath view object A. I finally added view object C as a detail group (form layout, same page) beneath view object A (i.e., parallel to view object B). The module generated and built cleanly.
I ran the application, entered a master record, and saved the data. When I pressed the button to create a new record for detail 1 (view object B), fields appeared for the pages for detail 1 and detail 2 (view object C), not just detail 1. Also, the value of the Descriptor Attribute from the master record that linked it to the two detail pages populated the corresponding field in both of the displayed pages for the detail records.
This behavior does not occur if view object C (detail 2) is based on an entity different than view object B. Will JHeadstart allow a master to have multiple details where the details are based on the same entity object? Thanks.
Ray

Ray,
Unfortunately I cannot reproduce the problem. I filled in the A, B and C using a scott/tiger schema as follows:
A: Departments
B: All employees having a salary < 1000
C: All employees having a salary >= 1000
Then I created an application module with one group having two subgroups everything same page, just like you specified. Everything seemed to work fine. Do you have any idea what's different in your situation.
Aard-Jan van Kesteren
JHeadstart Team
Oracle Consulting

"Add Row" in Details. Displayed "Rows" disapear.

I've created an application using the Master Detail form.
I would like to "add" new rows, by inserting a new blank row in my Master Form. Currently it goes to the second page and gives me an input form. I'd like to add the new record directly to the Master Report. Can this be done (since the report is "tecnically" not a form?
Also, when adding a "Row" to my "Details" form, I get a new "blank" row, but the rest of the tabular form, that was displayed before hitting the "Add Row" button.
Any ideas?
Thanks,
leonhardtk.

Hi,
your question is not clear and thus hard to answer.
I have 'Create form' with Application table from a VO. initially Createform should display the template of VO in Application table to insert new rows only.
What does the sentence above mean? You create an ADF form from a View Object (this I understand). But what do you mean by +"template of VO in Application table"+ ?
but when I click on 'Add Row' in Application table..the new entry is not coming
Thought you were using an ADF form? (see how confusing your question is ?)
Maybe this helps anyway: If you create new rows in a table, you don't use the Create but CreateInsert operation
Frank

Problem in creating reports with one multiple detail tables

hi,
i tried to create workbook in the discoverer user edition with ONE MASTER TABLES AND MULTIPLE DETAL TABLES. but it does not allow . is there any solution ?
NAresh

I've given up on trying to do this in the user edition - the 2 masters to multiple details. Instead, I create custom folders in the admin edition. They never complain about masters and details. If anyone ever figures out how to do this in the User Edition, I'd sure like to hear about it. I do agree that the original problem - 1 master to multiple details works fine in 3.1.44.

Single Master, multiple details add-rows problem

Similar Messages

Maybe you are looking for