Size category in technical settings while creating database table
Hi all,
I am creating custom table in ABAP dictionary, while allocating size category in technical settings F4 help values are not coming.i am entering 0,but number of records expected range is not coming.i searched across SDN but couldn't find anything related to it.
Thanks in advance.
Sheela Patil
Edited by: Sheela Patil on Oct 4, 2011 7:21 PM
Hi
Check it properly it will dispaly the size ranges on clicking F4 button.
In this format it will display on clicking F4 button on size category field.
SzCat Number of data records of table expected
0 0 to 4,800
1 4,800 to 19,000
2 19,000 to 76,000
3 76,000 to 300,000
4 300,000 to 1,200,000
5 1,200,000 to 2,400,000
6 2,400,000 to 4,900,000
7 4,900,000 to 9,800,000
8 9,800,000 to 19,000,000
I hope it is solved for you.
Similar Messages
-
Steps to follow while creating Database table in notes or paperwork
what are the steps to follow while creating Database table in notes or paperwork
Thank you,
Regards,
Jagrut Bharatkumar Shuklahi,
1. Goto Transaction SE11.
2. Enter the table name to be created. It should start with a Y or Z.
3. Press Create
4. Enter the Short description for the table
5. Enter the Delivery class for the table. It can be 'A', 'C' or other.
6. In the Fields tab, specify the table fields and the corresponding data elements or the built-in data types.
7. If the table needs to be made a client-depenedent table, the first field should be MANDT.
8. Goto Technical settings of the table and sepcify the Data Class and Size for the table. Also, there u can specify if buffering for the table should be allowed or not.
9. Now, activate the table.
if helpful reward some points.
with regards,
Suresh Aluri. -
Error while creating database table
Hi
I am creating a table with 2 key fields of length 255 chars each. its giving me error Key field is greater than 780. Please suggest.
Regards
AdityaHi,
Since table key can be max of 255 length,we rarely make use of a single key field of 255,
so, reduce the length of field.
Constraints
All the key fields of a table must be stored together at the beginning of the table. A non-key field may not occur between two key fields.
A maximum of 16 key fields per table is permitted. The maximum length of the table key is 255.
If the key length is greater than 120, there are restrictions when transporting table entries. The key can only be specified up to a maximum of 120 places in a transport. If the key is larger than 120, table entries must be transported generically.
A table may not have more than 249 fields. The sum of all field lengths is limited to 1962 (whereby fields with data type LRAW and LCHR are not counted).
Fields of types LRAW or LCHR must be at the end of the table. Only one such field is allowed per table. There must also be a field of type INT2 directly in front of such a field. The actual length of the field can be entered there by the database interface.
Edited by: Sreesudha Gullapalli on Feb 6, 2009 8:19 AM -
Error while creating database manually
hi guru's i am getting error while creating database manually
my sql is SQL>create database lily
logfile group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
character set WE8ISO8859P1
national character set utf8
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'
size 50M
autoextend on
next 10M maxsize unlimited
extent management local
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf'
size 10M
autoextend on
next 10M
maxsize unlimited
undo tablespace undo
datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'
size 10M
default temporary tablespace temp
tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf'
size 10M;and i am getting following error
create database lily
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\LILY\CONTROL01.CTL'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists
code}
Edited by: CHETAN YADAV on Jul 19, 2011 6:55 PMcreate database lily
logfile group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf' size 150M
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf' 150 M
undo tablespace undo datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf' size 10M
default temporary tablespace temp tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf' size 10M;
remove the SQL> from the a.sql script also change the system datafile size to minimum of 100mb size
ALSO check/change the undotablespace name with your init parameter file it should match as it is in the init parameter file
Edited by: rajeysh on Jul 19, 2011 6:59 PM -
Error while creating database on 10.2 enterprise eidition
Hi,
When i trying to create database through batch file on oracle version 10.2 enterprise edition, its giving error.
ORA-01092: ORACLE instance terminated. Disconnection forced
Following error message logged in log file:
ORA-00604: error occurred at recursive SQL level 2
ORA-00942: table or view does not exist
Offending statement at line 7032
create unique index apply$_conf_hdlr_columns_unq1
on apply$_conf_hdlr_columns(object_number, column_name)
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 7032
ORA-00604: error occurred at recursive SQL level 2
ORA-00942: table or view does not exist
The same script is working fine on Oracle 10.1 Enterprise edition But its giving error on Oracle 10.2 Enterprise edition while creating database.
Please help.
Thanks in advanceHi,
Content of PFILE:
# Basic Initialization Parameters
cluster_database=false
compatible=10.1.0.2.0
control_files = ("F:/oracle/oradata/DTO/ctrl01.ctl", "F:/oracle/oradata/DTO/ctrl02.ctl")
db_block_size=8192
# db_create_file_dest # only used in OMF mode
# db_create_online_log_dest_n # only used in OMF mode
db_domain=""
db_name=DTO
db_recovery_file_dest=F:/oracle/oradata/DTO/flash_recovery_area
db_recovery_file_dest_size=2G
db_unique_name=DTO_01
# instance_number # RAC parameter
job_queue_processes=10
# log_archive_dest_n # NOARCHIVELOG mode
# log_archive_dest_state_n # NOARCHIVELOG mode
# nls_language # OS dependant
# nls_territory # OS dependant
open_cursors=50
pga_aggregate_target=10M
processes=50
# remote_listener # RAC parameter
remote_login_passwordfile=EXCLUSIVE
# rollback_segments # UNDO_MANAGEMENT mode
# sessions # derived from processes
sga_target=100M
shared_servers=0
star_transformation_enabled=FALSE
undo_management=AUTO
# undo_tablespace # first UNDO tablespace
# Other Parameters
background_dump_dest=F:/oracle/admin/DTO/bdump
core_dump_dest=F:/oracle/admin/DTO/cdump
cursor_sharing=SIMILAR
db_file_multiblock_read_count=64
db_files=400
db_writer_processes=2
instance_name=DTO
log_buffer = 8192
log_checkpoint_interval = 10000
log_checkpoint_timeout = 0
os_authent_prefix=""
service_names=DTO
statistics_level=typical
timed_statistics=true
user_dump_dest=F:/oracle/admin/DTO/udump
utl_file_dir=*
Command in batch script:
CONNECT sys/oracle AS SYSDBA
STARTUP NOMOUNT PFILE=&ADMN_DIR/pfile/init&ORA_INST..ora
CREATE DATABASE &ORA_INST
CONTROLFILE REUSE
LOGFILE
GROUP 1 ('&REDO_DIR_1/redo11.log','&REDO_DIR_2/redo12.log') SIZE 10M REUSE,
GROUP 2 ('&REDO_DIR_1/redo21.log','&REDO_DIR_2/redo22.log') SIZE 10M REUSE,
GROUP 3 ('&REDO_DIR_1/redo31.log','&REDO_DIR_2/redo32.log') SIZE 10M REUSE,
GROUP 4 ('&REDO_DIR_1/redo41.log','&REDO_DIR_2/redo42.log') SIZE 10M REUSE
DATAFILE
'&DATA_DIR/syst01.dbf' SIZE 40M REUSE AUTOEXTEND ON NEXT 40M MAXSIZE 2G
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE
'&DATA_DIR/saux01.dbf' SIZE 40M REUSE AUTOEXTEND ON NEXT 40M MAXSIZE 2G
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '&TEMP_DIR/temp01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 10M
UNDO TABLESPACE undo
DATAFILE '&UNDO_DIR/undo01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G,
'&UNDO_DIR/undo02.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G
CHARACTER SET AL32UTF8
SET TIME_ZONE = 'Europe/Warsaw'; -
Error while creating database in classic appln
Hi All,
I am getting this error while creating database in classic application.
com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
Can anyone please let me know why I am getting it?
Thanks in advanceCan you check for a more specific error code in the Application log? There can be various reasons for this:
1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
HTH-
Jasmine. -
Error message while creating database
Log error
while creating new database
Robot-properties
XML Parsing Error: junk after document element
Location: http://portalserver/psconsole/faces/search/RobotPropertiesHome.jsp
Line Number 18, Column 1:<body id="_id3" onload="return _id3_jsObject
I have created my new search engine .
and the robot is not running.I getting log error.
and no directory is created with the search name.
please help me with the fields..
creating search server..
required Port:
required Configuration Name:
Required Instance:
*Web Container Administration*
Required Administration Host:
Required Administration Port:
Required Administrator:
Required Administration Password:
*Web Container Directories*
Required Install Directory:
Required Instance Directory:
Required Document Root Directory:Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe -
Erro while creating Database in 9i
I ve Installed Oracle 9i in Windows xp in Pentium 4 m/c while creating database its giving the following Error
java.io.FileNotFoundException:c:\oracle\oraServer\admin\DEVPOS\pfile\init.ora
Please Provide solutionDid you checked if the pfile is at this location and has the same name?
Regards
Demetrios -
Disable recyclebin while creating database
hi,
while creating database how can i disable recycle bin in oracle11g ,
please suggest me to do so?
thanks in advance....Doc question (as usual)
http://docs.oracle.com/cd/E11882_01/server.112/e25494/tables011.htm#ADMIN11680
All parameters can be set using dbca.
Sybrand Bakker
Senior Oracle DBA -
Can change the size of the redolog files while the database is running.
How the size of the redolog files will hurt your database performance ?
Can change the size of the redolog files while the database is running in oracle 9i. ?
What will be its impact on the standby database ?
Thanks in advance.redo logs that are too small can cause waits on the switches for heavily utilized systems. logs that are too large are a pain the a$$ during recovery. check v$loghist to see how often switches occur - an average of 20 minutes is good; if you have many switches happening back-to-back, that's a bad sign.
you can change the sizes while the db is up. choose a redo group that is INACTIVE, drop it, delete the files, and recreate it with larger files. then force a switch ("alter system switch logfile;"), and do another inactive group. I actually prefer to do as many switches as necessary to make the new group active so I can verify that I didn't screw up before dropping the next group.
not sure of impact on standby database. -
Getting error while creating a table
Hi there,
I have created a user 'ram' and gave "create table" permissions for that user.
After that, when I tried to create a table using the command
create table countries as select * from hr.countries;
where hr is another user and countries is the name of table in that schemagetting error message
ERROR at line 1:
ORA-00942: table or view does not existNOTE: The same error occurs even while creating a table in 'ram' schema after granting sysdba rights to 'ram'
Thanks
RajivHi,
dose the user ram has SELECT rights on the table hr.countries. Can he do SELECT in that table.
Thanks -
I am receiveing error while creating Z table: Entry in table TAORA missing
Hi Experts,
I am receiving "Entry in table TAORA missing" while creating Z table.
Please help
Edited by: N_niki on Jun 11, 2011 9:22 AMHi
1) Check for the DB System. The Table name in "Entry in table TAORA missing", meant to save the "DATA CLASS of the ORACLE application"., OR
2) check for the Data Class you Selected, on Creation of the Z Table, for which an Entry exists in the TAORA or the Available DATA CLASS in the TAORA Table to fix it.
Regards
Gopu -
HI,Can anybody pls explain me, while extracting database table from sap-r/3
HI,Can anybody pls explain me, while extracting database table from sap-r/3 to sap-bw using GENERIC DATA SOURCE it will ask us Name of the APPLICATION COMPONENT what does it means?
Application Component is a collcetion of tightly coupled S/W component. You can think of it is like folder, where all the related S/W will be put in. Like MM will have all the DS related to MM.
Thanks..
Shambhu -
How to assign a seq while creating a table
Hi,
How to assign a sequence such that i dont want to give the sequence while creation. i mean
if employee table is there
sl_no empname salary .....
i dont want to give sequence while inserting the data, i want to give the sequence at creation of table level for sl_no
i tried this
create table seqtest1 (id number primary key default rajseq.nextval);
but it is showing me the error
ERROR at line 1:
ORA-00907: missing right parenthesis
whats the solution
please help me
Thank you
Raj deep.AHi Raj,
You can not assign a sequence to a column while creating a table. you have two options for this. (So you can also use one sequence for multiple tables)
1. As Gasparotto said, you can create a before insert statement. OR
2. you can assign new sequence number in the program code. for example.
insert into xxx (user_id,name,surname) values (seq_userid.nextval,'Raj','Deep');
Good Luck.
Onur -
Getting ORA-32700 while creating database
I am getting following error when creating the database :
ORA-32700 error occurred in DIAG Group Service
The error description is as follows :
Cause: An unexpected error occurred while performing a DIAG Group Service operation.
Action: Verify that the DIAG process is still active. Also, check the Oracle DIAG trace files for errors.
The setup is as follows :
Database : Oracle 9i Rel 2.
OS : IBM AIX 4.3.3
We are trying to create the database from sqlplus/dbca. It seems that in the database creation process it is throwing the error while it is trying to create the control files.
listener.ora :
LSNR_TSEDMDB2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
TNSNAMES.ORA
LISTENER_TSEDMDB2 =
(ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
We have IBM HACMP Cluster setup on 3 machines. This machine (prcsmbk1) on which I am getting the error while creating the database is part of that HACMP cluster. While installing the Oracle database software also it gave me a list of the 3 machines which are in HACMP cluster. We are not planning to setup RAC, but still it seems like while creating the database control files Oracle is trying to perform some group service operation.
Alert log :
Sat Jan 3 03:31:18 2004
Starting ORACLE instance (normal)
Sat Jan 3 03:31:18 2004
Global Enqueue Service Resources = 64, pool = 4
Sat Jan 3 03:31:18 2004
Global Enqueue Service Enqueues = 128
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
GES IPC: Receivers 1 Senders 1
GES IPC: Buffers Receive 1000 Send 530 Reserve 300
GES IPC: Msg Size Regular 432 Batch 2048
SCN scheme 3
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 117440512
large_pool_size = 16777216
java_pool_size = 117440512
control_files = /u01/app/oracle/oradata/TSEDMDB2/control01.ctl
db_block_size = 8192
db_cache_size = 33554432
compatible = 9.2.0.0.0
db_file_multiblock_read_count= 16
fast_start_mttr_target = 300
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = TSEDMDB2
dispatchers = (PROTOCOL=TCP) (SERVICE=TSEDMDB2XDB)
local_listener = LISTENER_TSEDMDB2
job_queue_processes = 10
hash_join_enabled = TRUE
background_dump_dest = /u01/app/oracle/admin/TSEDMDB2/bdump
user_dump_dest = /u01/app/oracle/admin/TSEDMDB2/udump
core_dump_dest = /u01/app/oracle/admin/TSEDMDB2/cdump
sort_area_size = 524288
db_name = TSEDMDB2
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 25165824
aq_tm_processes = 1
Sat Jan 3 03:31:19 2004
clUster interconnect IPC version:Oracle UDP/IP
IPC Vendor 1 proto 2 Version 1.0
PMON started with pid=2
DIAG started with pid=3
LMON started with pid=4
LMD0 started with pid=5
DBW0 started with pid=6
LGWR started with pid=7
CKPT started with pid=8
SMON started with pid=9
RECO started with pid=10
CJQ0 started with pid=11
QMN0 started with pid=12
Sat Jan 3 03:31:24 2004
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Sat Jan 3 03:31:25 2004
Create controlfile reuse set database TSEDMDB2
MAXINSTANCES 1
MAXLOGHISTORY 1
MAXLOGFILES 50
MAXLOGMEMBERS 5
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/TSEDMDB2/cwmlite01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/drsys01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/example01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/indx01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/odm01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/system01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/tools01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/undotbs01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/users01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/xdb01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/TSEDMDB2/redo01.log') SIZE 102400K,
GROUP 2 ('/u01/app/oracle/oradata/TSEDMDB2/redo02.log') SIZE 102400K,
GROUP 3 ('/u01/app/oracle/oradata/TSEDMDB2/redo03.log') SIZE 102400K RESETLOGS
Sat Jan 3 03:31:25 2004
ORA-1503 signalled during: Create controlfile reuse set database TSEDMDB2
MAX...
Sat Jan 3 03:32:28 2004
Restarting dead background process QMN0
QMN0 started with pid=15
Sat Jan 3 03:32:28 2004
Shutting down instance (abort)
License high water mark = 3
Instance terminated by USER, pid = 47128
Diag trace file :
/u01/app/oracle/admin/TSEDMDB2/bdump/tsedmdb2_diag_49754.trc
Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
ORACLE_HOME = /u01/app/oracle/product/9.2.0
System name: AIX
Node name: prcsmbk1
Release: 3
Version: 4
Machine: 0002599F4C00
Instance name: TSEDMDB2
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
49754
Number of Serviceable Networks detected is less than 2
Disabling Transparent Network Failover Feature.
*** SESSION ID:(2.1) 2004-01-03 03:31:19.886
kjzcprt:rcv port created
kjzmreg2: slos err[1 19 [HA_GS_CONNECT_FAILED] sskgxn_gs_in 19]
[kjzmreg2]: Error [category=1] is encountered
Node monitor problem:[32700][kjzmreg2]
Membership is lost in DIAG group
Any help is appreciated. Thanks in advance.Thanks a lot for all your responses. We found the issue. The issue was that when we installed 9i we selected Enterprise option which installed RAC also. And after that when we were trying to create database Oracle was thinking that we are trying to create database in RAC env. and most likely it was trying to create/sync the control files on all the machines in the cluster.
The sequence of events were as below :
1. We have 8i installed on this machine
2. We installed 9i (9.2.0.1.0) using the same ORACLE_BASE but different ORACLE_HOME. We didn't select "Custom Install". We selected "Enterprise install" option
3. We installed new installer (2.2.0.18.0 ) and then 9i patch (9.2.0.4.0)
4. While creating the database (manually & through DBCA) we were getting ORA-32700
5. We tried to uninstall (using OUI 2.2.0.18.0) 9i (including the patch) completely but it never succeeded. We noticed that when we started uninstall it did show progress for about 20 minutes and after that it didn't show any progress. It was not taking any CPU cycles and It was not writing to the log file either. Basically we were never able to cleanly uninstall 9i. We tried almost 2 to 3 times.
6. Then we installed 9i using a new ORACLE_BASE and this time we selected "Custom Install" and we did not install RAC. This is successful
7. Then we installed new installer (2.2.0.18.0 ) and we tried to install the 9i patch (9.2.0.4.0) using this new installer but it never succeeded. Then we tried to install the 9i patch (9.2.0.4.0) using the old installer version (2.2.0.11.0) and it was also successful.
8. Then we tried to create database using DBCA and it was successful and then we dropped the database which was created using DBCA and then we created it manually through SQLPLUS and this was fine too.
So basically what we learned from this exercise is that if we are installing 9i on a machine which is part of a cluster and if we don't plan to setup RAC then we shouldn't install RAC and we should do a custom install. I wish there was a option in create database stmt to tell Oracle that though we are creating database on a machine which is part of a cluster environment but we don't intend to setup RAC.
And other thing which is still a mystery is that why does the uninstall never completes successfully. One question on this : We were using the installer version 2.2.0.18.0 to uninstall the 9i software. Do we need to use the older version (2.2.0.11.0) of the OUI?
Maybe you are looking for
-
My Macbook Pro will not charge. I have tried other charges and nothing. Can the MagSafe port go bad? Is that expensive to repair?
-
Standard LSMW for open vendor items with Withholding tax
Hi All, I am searching the direct input LSMW which is having the Withholdig tax. There is a direct input program in LSMW ( RFBIBL00) but it is not uploaded the withholding tax for open vendor and open customer items. If anybody know which LSMW is rec
-
Boot Fail after latest BIOS Update on Flex 2-15D
Hi everyone, I have a severe problem (I guess) after the latest BIOS Update. Windows 7 freezes during startup. I own a 64-bit Lenovo FLex 2 15D with AMD A6-6310 and R4, 4GB RAM and a SSHD (8GBSSH). I purchased it without OS and installed Windows 7 -
-
How to use my findTheHighest method to find the highest value in my two dim
I am going to create a 13row by 10 colume two dimensional array. how to use my findTheHighest method to find the highest value in my two dimensional array. .When i compile this program , i got those as following; "Exception in thread "main" java.lang
-
Why has Software Update stopped iTunes?
I'm running iTunes 10.5.3 on my G4, with no problems. Software Update used to offer me iTunes 10.6 but I could never make up my mind if I needed it. But recently, Software Update has stopped including iTunes in its list. Why? I should also point out