Skype 7.7 stops working after a few hours

After a few hours maybe 6 hours or so, skype will not let me get on calls. If I try to get on a call skype immediately stops working. I am using Windows 10 and I tried uninstalling it and reinstalling it but that has not worked.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

Similar Messages

Macbook Air 13" Camera stops working after a few hours. Needs Restart to be functioning again. How do I fix this?

Hello!
The camera stops working. Not detected by any program (Facetime, Skype, Hangouts, Zoom). This happens usually after a few hours of work or after the computer sleeps. To make the webcam function again I need to restart.
Any suggestions?

Why does that seem likely to be a hardware issue? How did you come to that conclusion? Do you know something about this issue that indicates that? (I realise that this might sound short and rude - I am not trying to be rude here - just to understand) My thought is that conventional troubleshooting would say that this is a software issue because it is fixed with a restart.
I also have this problem. The camera quits working after some time - I have not been able to make it stop working. Sometimes it is after I suspend the computer (close the lid) other times it still works.
All I know is that intermittently my camera stops working and it is a big pain to have to reboot whenever I am going have a video chat.
Anyone got any solutions, I'm not covered by applecare so would rather try and fix it myself if possible?

Proxying from FMS to HTTP stops working after a few hours

Hi,
I'm using FMS Streaming 3.5.0 r405 on linux servers to stream videos with RTMP/RTMPT. We have decided to use the new proxying function to redirect HTTP requests to a Web server. We did not install the included Apache server, but used a lighttpd server installed on the same machines and configured to listen on port 81. So when a client connects with our player, it tries first RTMP, RTMPT and if it times out on these attemps, we try to go through with HTTP. FMS proxies the HTTP request received on port 80 to the lighttpd server on port 81.
My fms.ini file contains:
# Whether to start and stop the included HTTP server along
# with FMS.
SERVER.HTTPD_ENABLED = false
# IP (address and) port that Flash Media Server should proxy
# unknown HTTP requests to. Leave empty to disable proxying.
# With no address, specifies a localhost port.
# For example:
# HTTPPROXY.HOST = webfarm.example.com:80
HTTPPROXY.HOST = :81
This works well, but after a few hours, the HTTP proxy of FMS does not work anymore. Lighttpd is still responding on port 81. There is no error in all log files. Just stops working!
I have to restart FMS to enable again the tunnel. This behavior happens on all my streamers. Is it a bug or am I missing something?

Hi,
This is what I'm getting when using "ldd fmsedge"
root@wis-fms fms]# ldd fmsedge
linux-gate.so.1 => (0x006ba000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00a67000)
libasneu.so.1 => not found
librt.so.1 => /lib/librt.so.1 (0x0012a000)
libdl.so.2 => /lib/libdl.so.2 (0x00a61000)
libcap.so.1 => /lib/libcap.so.1 (0x00688000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x00cc5000)
libm.so.6 => /lib/libm.so.6 (0x00a38000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00c3b000)
libc.so.6 => /lib/libc.so.6 (0x008f3000)
/lib/ld-linux.so.2 (0x008d5000)
[root
Alon

Wireless shows connected but stops working after a few hours?

Hi. I am having an issue with my linksys WRT160N v2 router. I have my desktop computer hardwired to my range extender (belkin E2S2400) which connects wirelessly to my router. The issue I am having is that after a few hours, especially if I am not on the computer, the wireless will stop working. Everything still shows connected and there is no evidence of a change except that anything I try to do (webpage, download, even the router itself) times out and says not available. It's as if the connection has somehow been put to sleep and is not being woken up.
This is despite having programs like bittorrent running in the background (seeding, not constant). I cannot find any settings to indicate sleeping or power issues or anything. If I reboot my range extender it works just fine. There is nothing on the range extender about going to sleep and it had no problem with my other router I was trying out. My other devices like my phone have no problem like this.
Any help is greatly appreciated!

It would be best to check if the WRT160N v.2 router has the latest firmware installed especially if you experienced the problem on all of your wireless devices. If ever you have the latest firmware installed on your router please try to check on your current wireless security settings especially the wireless channel, you may set it to 1,6, 9 or 11.

Touch ID stops working after a few hours of capturing a fingerprint

After capturing fingerprints Touch ID works for a while, a couple of hours, then stops woking and does not recognize fingerprints. I've taken the iPhone 6 Plus to the Genius Bar twice where they recapture the fingerprints, Touch ID works while in the store, then stops working after I leave. One Genius had me place the iPhone in Airplane mode, delete the fingerprints, turn-off the iPhone and then restart iPhone, turn-off Airplane mode and recapture the fingerprints. Touch ID worked for a couple of hours. Suggestions?

Kappy:
Unfortunately, I wiped down the home button and my thumb, recaptured my fingerprint and I have the same result. The Touch ID stops working shortly thereafter.

Smb network shares from W7 PC stop working after a few hours

I have a W7 pc sharing storage on my network.
when connecting when first starting my macbook, it connects fine, but after a few hours it drops out, and i am unable to connect to it unless i restart my macbook.
I have been using "connect to server" to connect my network shares, and when i try to reconnect them using this, it just keeps trying to connect, and wont ever connect even after leaving it to try for over 4 hours (connecting when first starting is fine, taking less than a minute).
sounds similar to a problem with the 10.6 server, where smb crashes.
is there a way to restart smb service on the macbook, or even fix it, so that it doesnt have to always be reconnected?
computer_tim

computer_tim wrote:
I have a W7 pc sharing storage on my network.
when connecting when first starting my macbook, it connects fine, but after a few hours it drops out,
That's normal. Connections to non-server Windows machines will drop after a period of non-use.
and i am unable to connect to it unless i restart my macbook.
That's not normal. You should be able to reconnect at will.
I have been using "connect to server" to connect my network shares, and when i try to reconnect them using this, it just keeps trying to connect, and wont ever connect even after leaving it to try for over 4 hours (connecting when first starting is fine, taking less than a minute).
There's a network connectivity problem. That is not how things are supposed to work.
sounds similar to a problem with the 10.6 server, where smb crashes.
Okay, you definitely have a network connectivity problem. OS X Server is not supposed to behave that way. What kind of network infrastructure do you have? What make/model routers, switches, hubs, whatever? WIred/wireless? What class cabling or if wireless, what class wireless?
is there a way to restart smb service on the macbook, or even fix it, so that it doesnt have to always be reconnected?
Yes. Usually you just disconnect and reconnect at will.
computer_tim

Soundblaster Zx stops working after a few hours

Hi everyone,
after a while of using my pc, no newly started Program can use my Soundcard.
I mean when i for example start Spotify directly after booting and let it play a few hours the Music play normally.
But when i start a Game after a while of letting it play, or start a Youtube video in a Browser, or even restart Spotify, the sound of these newly started programs is completely disabled.
Spotify even gives out an error "There was a problem with your Soundcard".
But the old running programs still play their sounds. This shows that its not a Hardware fault.
The only thing that helps is a restart of my PC.
Can anyone tell me what to do here?
- I already re-installed the sound driver completely (with deleting old driver files over the device manager)
- I tried changing options in the control center of the driver
I use Windows 8.1, the newest driver from the creative website and my Windows is fully updated.

But when i start a Game after a while of letting it play, or start a Youtube video in a Browser, or even restart Spotify, the sound of these newly started programs is completely disabled.

Mighty Mouse stops working after a few hours on iMac G5

Hello
I got a mighty mouse and it worked perfectly for a while (so I know that I am clicking and using it properly)
...then it just started acting crazy..
examples:
-I'd have my hand over it(not touching it) and it would register a click
-randomly registering clicking side-buttons
-right-click just doesn't work
So I took it back to apple store and got a replacement...no problem.
I plugged in new one...worked fine for a while, then the same problem reappears.
So I unhook the mighty mouse, plugin my MSFT optical mouse...then a few hours later, perhaps a reboot or two... I'll plugin my Mighty Mouse and again it will work fine. Then the whole problem repeats itself.
I don't think the problem is with the mouse..but perhaps how it works on the iMac G5.
Anyone seen anything like this? Its strange it happenned on TWO diff. Mighty Mouses.

Rob
I haven't gotten any help on it. I mean to call apple but haven't gotten to it. I will try turning off the side buttons when I get to the machine again, but as far as I'm concerned, for approx $50, this thing should work perfectly. I bought it because it has more buttons and turning them off isn't an option. APPLE, ARE YOU LISTENING.
Please help us!
Marc

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

I have upgraded iTunes now it stops working after a few seconds.Help?

i have upgraded iTunes now it stops working after a few seconds.Help?

Hi Andrew,
If you have issues with iTunes unexpectedly quitting you may find the troubleshooting steps in this article useful -
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
If you are using Windows XP, you may want to use this article -
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
Thanks for using Apple Support Communities.
Best,
Brett L

CS4 OpenGL stops working after a few minutes of painting

Hi,
CS4 OpenGL stops working after a few minutes of painting. It doesn't seem to have anything to do with the amount I paint. If I save the file, then reopen I can paint for another few minutes before the opengl stops working. Is this a standard problem with CS4? Is there a solution? Thanks! PJ
System Specs:
Windows XP SP3, updated
Latest DirectX & all software updated
Nvidia Geforce 9600 GT 512MB w/ latest driver
Athlon64 X2 Dual 3800+
2GB RAM
Photoshop CS4

Joining the party...
I am having the EXACT same issue, PLUS my Wacon PTZ-430 only works for a fewminutes then, when the Open GL craps out, so does it... but only certain aspects. The cursor still moves, it just will not paint. Mouse will (direct via USB) but the tablet won't. If I delete CS4 prefs, then the Wacom works fine... for a while. Latest Wacom drivers and bee on the phone w them. All is fine under CS3.
From DXDiag:
System Information
Time of this report: 12/8/2008, 15:37:52
Machine name: VM-EDITING
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.080814-1236)
Language: English (Regional Setting: English)
System Manufacturer: VELOCI
System Model: 122-CK-NF68
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz (2 CPUs)
Memory: 2814MB RAM
Page File: 1049MB used, 3652MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Dual Monitor:
NVIDIA GeForce 8600 GT
Manufacturer: NVIDIA
Chip type: GeForce 8600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_043910DE&REV_A1
Display Memory: 256.0 MB
Current Mode: 1920 x 1200 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0011.7824 (English)
DDI Version: 9 (or higher)
Second:
Card name: NVIDIA GeForce 8600 GT
Manufacturer: NVIDIA
Chip type: GeForce 8600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_043910DE&REV_A1
Display Memory: 256.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0011.7824 (English)
DDI Version: 9 (or higher)

Why does my iPod Shuffle stop working after a few songs?

I had my iPod Shuffle for about a month now and it's already causing me trouble.
I would play a couple of songs, but when I go to change it, it stops working. I turn it off and on again only to have it take me back to where I started off at (e.g. Let's say I have 100 songs, I start at 50 and I get to 55 before it shuts off. When I turn it back on, it starts at 50 all over again). This process would happen over and over again with seemingly no end.
So my question is, why does my iPod Shuffle stop working after a few songs and how can I fix it?
I already tried using the iTunes troubleshooting guide, but nothing worked.
Details -
4th Generation
I only use it at the gym or when I'm running
I've only used the Apple products that came with it so far
(e.g. charger, headphones, etc.)
881 MB are still left
Music stops randomly, no common number or pattern

I had the same problem, I purchased a new ipod shuffle, followed the instructions but it would stop after a few songs and I would have to shut it off, wait and turn it back on and it would go back to the same song and then once again, after a few songs it would shut off. I returned the ipod and got another one, same thing happened. This is how I resolved the issue.
1. open itunes, make sure its up to date, then connect your shuffle to your pc
2.on the left of the itunes window, select your ipod, then at the top select music then check the sync box and select "selected playlists"
3.then go back and click on your ipod on the left, a message will appear just select apply
all of your music should be emptied from your ipod.
4.delete all of your playlists on the left, this will not delete anything from your library. Delete the "purchased" playlist under itunes store on the left as well, once again this will not delete anything from your library
5.There should be an arrow just in front of your ipod, click on this arrow and you should see your music file for the ipod appear, this should be the only file that you see, everything else should be deleted.
6. go to your music library and check only the songs that you want to load into your ipod. Double click on each song to make sure that they all play.
If you find a song that does not play you should be asked to authorize it, don't waste your time that did not solve the issue for me, instead cancel to authorize the song and then delete the song and move it to recycle bin. Once the song is deleted a cloud should appear, click on the cloud and download the song again, when done, make sure the song plays and that it is checked.
7.After you have made sure that all of the songs play and are checked, click on your ipod once more, located to the left, check the box "sync only checked songs" then from the top select music. In the music window select "sync music' and then select "entire music Library"
8. Go back to the left and click on the arrow in front of your ipod, you should see the music file, click on the music file and you should see all of your music being loaded to your ipod.
9. When all of the music is done loading, eject your ipod by clicking on the arrow located after the battery symbol where your ipod appears on the left
10. Turn on your ipod and scroll through your songs to make sure that the problem is resolved.
Not sure if all of this was necessary but it worked for me.

Touch screen L2105 always stops working after a few minutes

I have windows 8.1 and the touch screen always stops working after a few minutes- ie. the touch operation via USB, the screen itself is OK.Have tried windows switching power saving off, but no help
charsepp

Hello charsepp,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the touchscreen stops working after a short period on your HP L2105 Monitor. The first thing you are going to need to do is determine if this is a monitor or PC issue. To do this you should try connecting the monitor to another computer and see if the issue persists.
If the issue does not persist it is the computer, and if your computer is also HP I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running? Is the Windows Version on My Computer 32-bit or 64-bit?
If the issue persists when you try the monitor on another computer then the issue appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Flash player stops working after a few days.

I'm recently having issues with flash player on IE and Firefox each time a new version is released. This time the flash player stops working after a few days without any reasons. I have asked two other questions and I have tried the solutions but this time they are not working:
http://forums.adobe.com/message/4617987#4617987
http://forums.adobe.com/message/4548211#4548211
Could anyone tell me what the reason is?
I also need links providing Flash player for IE and Firefox which are always updated. I need to first download the installer then install it offline not install it directly from adobe website.
Please help me solve this once forever!
Message was edited by: sia1989

I'd suggest trying a clean install: How do I do a clean install of Flash Player?
For offline installers, please see this help document: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

I tunes stop working after a few minutes

i tunes stop working after a few minutes

of course i did.
this is my launchpad report about this problem:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1330867
merged with this report because this two are exactly the same:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1038479

Skype 7.7 stops working after a few hours

Similar Messages

Maybe you are looking for