Slideshow - Stills/Audio Not Exporting Correctly

I have a problem with a slideshow project I’ve been working on for a few days in Premiere Elements 10.
First, my system:
Dell Studio XPS 9100
Intel Core i7 @ 2.67Ghz
12Mb DDR3 SDRAM (1333Mhz)
ATI Radeon HD 5800 video card 1GB RAM
Windows 7 64Bit
750Gb Seagate ST3750528AS HD, 7200RPM
I insert the soundtrack in Audio 1 and then insert about 100 photos one at a time. When inserting each photo, I adjust the still duration manually to match the rhythm of the soundtrack. When I’m done, it all lines up beautifully when I play it in the app. Then I save it as an MPEG and play it back, but the still transitions are off from the rhythm by a few milliseconds; just enough to be unusable.
It’s a little frustrating that what I see in the app is different from what the app outputs. I’ve tried different MPEG formats (NTSC DVD Standard to HDTV 1080P 29.97 High Quality).
Any suggestions would be greatly appreciated.

Ah. Sorry about that! I know just enough about this program to get a headache
Stills were larger than 1000x750.
Sizes of imported photos: 4288x2848, 2848x4288
PROJECT SETTINGS
General:
Editing Mode = HDV 1080i
Timebase = 29.97 frames/second
Playback settings = Desktop video display during playback (checked), External Device (none), 24p Conversion Method (Interlaced Frame), Aspect Ratio Conversion (Hardware if supported, Desktop Audio radio button selected), Export (external device = none), Disable video output when in the background (checked).
Frame size = 1440 x 1080
Pixel Aspect Ratio = HD Anamorphic 1080 (1.333)
Fields = Upper Field First
Display Format = 30fps Drop-Frame Timecode
Title Safe Area = 20 & 20
Action Safe Area = 10 & 10
Audio:
Sample Rate = 48,000 Hz
Display Format = Audio Samples
Capture :
Capture Format = HDV
Video Render:
Video Rendering = Maximum Bit Depth (unchecked)
File Format = I-Frame Only MPEG
Compressor = MPEG I-Frame
Optimize Stills = Checked
I’m not sure how to share or export as .avi.
Thanks!

Similar Messages

Devanagari font in layed out in Indesign (using IndicPlus) does not export correctly to a PDF.

Namaste InDesign gurus,
I have a problem at hand. Wondering if anyone has encoutered similar problem before? Any help is greatly appreciated. And if you're in San Francisco bay area - I can buy you a lunch :-)
Short description: Devanagari font in layed out in Indesign (using IndicPlus) does not export correctly to a PDF. All the ligatures are assembled and displayed in the PDF.
Adobe Indesign Version: InDesign CS5 Design Premium - regular U.S. version (not ME).
Steps I took:
I purchased CS5 Design Premium and also purchased the IndicPlus plugin to author sanskrit documents in InDesign. I create Sanskrit text using either of the following methods.
1) Itranslator
2) Paste the devanagari from the Itranslator directly into InDesign or paste it first into MSWord and then copy from MSWord and paste it to Indesign.
It doesn't matter how I paste it. After I apply the IndicPlus character/paragraph style so that the sanskrit looks good in InDesign, when I try to export it to a PDF. The PDF does not display the ligatures currectly. It just lists all the characters in order without assembling.
I've spent a lot of money buying CS5, IndicPlus and then I can't even create a simple PDF document from InDesign. It is very frustrating.
Has anyone been able to successfully export a sanscrit document from InDesign PDF ?
(Please let me know if my problem description needs more fleshing out).
I could create the PDF from MSWord directly but I'm trying to use indesign to layout my book. If InDesign cannot export to PDF I'll just have to use MSWord for my book layout. I've spend probably scores of hours trying to learn InDeisn and formatting my book content - seems like it is all going to be waste.
Is MSWord the best choice or only choice for laying out books that have sanskrit text in them?
-Ravi

Has anyone been able to successfully export a sanscrit document from InDesign PDF ?
Not Sanskrit, no, but plenty of Hindi, Nepali, Marathi, and other languages written in Devanagari script - so it should be possible. I don't even use IndicPlus, which by most accounts makes working with Indic text much easier.
1) Itranslator
I've never seen this, but a quick Google led me to the homepage of ITranslator for Windows, where I saw this:
Itranslator 99 (Build 1.3.0.86) & New Beta Version
uses 8-bit true type fonts and is compatible
with Windows 95/98/ME/NT/2000/XP.
For more information, click here.
Itranslator 2003 (Build 2.0.0.38) & New Beta Version
uses 16-bit Unicode-compatible fonts and is working
only on Windows 2000 / XP / Server 2003.
For more information, click here.
So, if you're using ITranslator 99, there's the problem - those "8-bit true type fonts" won't work in InDesign. Can you post a sample of the text you're trying to paste into InDesign? Name the font(s) you are using, both in Word and in Indesign, and if possible make a small sample of the text available for us to test. It's also possible that InDesign is using a substituted font, which could cause this problem. So, if the font name in InDesign has brackets around it, you know that InDesign doesn't actually have that font installed and is auto-substituting. Also, if you go to View -> Screen Mode -> Normal and the text is highlighted pink, you know that the font has dropped. (Unless the highlighting for dropped fonts was turned off - check in Edit -> Preferences -> Composition and make sure that "Substituted Fonts" is checked.
Also, for what it's worth, is there any way you could Place your text instead of copying and pasting? This may be cause of your problem - but even though it probably isn't, it's still worth a try.
Lastly - no, I've found InDesign to be superior for typesetting for almost all languages, but the learning curve is pretty steep, and many of the problems faced by people working in non-English languages are not easy to research when you have a problem.

Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

I use the CS6 suite with Acrobat XI at windows platform.
When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
What is the reason of this bug?
Before with Acrobat X this worked without problems

Hi Rob,
I was told the new way to work would be to draw files via Bridge direct into the InDesign file
and I thought automatically the color would not be changed.
my colourmanagement setting in bridge for the whole CS6 was ECI isocoated_V2_300
The Illustrator file was saved without color profile.
In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
“e.V.” was set to 100 % k
I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
no color conversion
convert to profile
convert to profile keeping existing values
in all tree files the pirates background has 322 % ink coverage instead of 291 %
Why does Acrobat convert “black” in the wrong way? If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
The same happens also by saving as .pdf X3 or .X1
The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
I also made test with the new ECI profiles for laminated prints from 2012.
And with newspaper profiles
In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
And then the 100 % k converts to cmyk, what I don’t want to have with text.
Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
enclosed you find my files
Kind regards
Lutz Hanbueckers
Hanbueckers Werbung GmbH
Brandsackerstr. 5
40764 Langenfeld
P.O. Box 40 02 01
40242 Düsseldorf
Tel. +49 02173 1 09 44 - 0
Fax +49 02173 1 09 44 - 10
[email protected] <mailto:[email protected]>
www.hanbueckers.de
Visit our site
Steady attractive offers!!!
HR Düsseldorf B 26 480
owner Manager: Lutz Hanbueckers
Von: Rob Day [email protected]
Gesendet: Samstag, 2. März 2013 04:26
An: Hanbueckers Werbung
Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

I have switched of the Badges but I still can not export the images?

I have switched of the Badges but I still can not export the images? because the badges are still showing on the images.

If you are seeing something overlayed on the exported image, this is probably not caused by the badges overlays, but by a watermark.
Check your export preset, if a watermark is enabled. In the "Export" panel set the "Export Preset" to "Edit" and check the settings for the preset you want to use. Disable any watermarks.

Audio not exporting with photos from iPhoto to QuickTime

I have QuickTime 6.5.3 and have been making slide shows of my photos with a music background. I had no previous difficulty exporting both the photos and audio as long as the background song was taken from my own CD (not downloaded from iTunes).
That is no longer happening. When I export the photo album to QuickTime, the audio will not export. It starts to play a second of the song, then the sound disappears. What am I doing wrong?

You might be correct, Terrence.
I have only had this new Mac for a week and I simply followed my usual procedure. I'm now wondering if I should just let Lightroom import the RAW files from my camera, do all of the editing and discarding over there, and so forth.
It's funny, after I posted that I looked at my own question to the forum and realised that I was creating a redundancy that was unnecessary.
My previous MAC was manufactured in 2009, so my iPhoto in there was the 2009 version.
Ah well -- guess I got my answer in a sort of self-administered smack on the hand manner!
Thanks.

Error message (audio not exported) when exporting to Flash

When I export my keynote file to Flash, my audio files are not included. I have checked the box to include audio files before exporting, the audio files are there and I can hear them in slide show view, they export to ppt, and I downloaded the latest version of Keynote. Any suggestions/ideas?

I think a few users have found that you MUST use mp3 as your audio format that you're adding to Keynote for it to export correctly. Even then it's sometimes hit or miss as wether it works or not.

Which functions and features in Numbers are NOT exported correctly to Excel?

I wish to know EXACTLY which functions I use in a Numbers sheet WILL FAIL to export correctly to an Excel or Neoffice spreadsheet.
For instance, I created a Numbers spreadsheet using prolific use of the IFERROR function. However, when I EXPORT to XLS, all the cells that used the IFERROR function were replaced by the literal value of the cell. My IFERROR formulae were not EXPORTED as I had expected.
I note that some formulae were converted correctly in my EXPORTED spreadsheet: eg MAX, MIN, AVERAGE.
I understand that IFERROR was a function introduced recently to Excel, ie in the 2007 version. Consequently, I suspect that Numbers exports to a pre-2007 version of Excel. If so, which version?
I have found this list that shows which functions are compatable amongst various versions of Excel:
Excel Functions: Compatibility Reference (2010, 2007 & 2003). (n.d.). Retrieved from https://docs.google.com/spreadsheet/ccc?key=0AsHau4_IeCfwdG45c0VhcjBBUGNreVo2ZzN NRU1BT0E#gid=0
This list shows that, for instance, IFERROR exisits inb both Excel 2007 and Numbers-09. So why is IFERROR not exported?
Curmi, J. (n.d.). Summary of function in excel and numbers-09. Retrieved from http://curmi.com/blog/wp-content/uploads/2009/01/functions-in-excel-and-numbers- 09.pdf
Some examples of my use of ISERROR in Numbers are as follows:
=IFERROR(RANK(C47,$C47:$J47,1),"")
=IFERROR(MEDIAN(C51:C58),"")
=IFERROR($C32-C88+1,"")
I use the above function to carry out the calculation ONLY IF a cell is non-blank and contains a number.
More questions
What are the rules that Numbers uses to convert to Excel?
Is Numbers converting to the 2003 version of Excel? ... or an earlier version? ... which version?
Why desn't Numbers advise me there were conversion errors or simplifications made?
eg: "Cell A33 Function IFERROR was exported to the cell value for Excel"
Is there a preference that I can select which version of Excel that Numbers will export to?
In the meantime, I must abandon Numbers and use NeoOffice!

Thanks,
I applied your suggested ISERROR transformation to examples such as:
=IFERROR(RANK(C47,$C47:$J47,1),"")
=IFERROR(MEDIAN(C51:C58),"")
=IFERROR($C32-C88+1,"")
However, a caution for young players....
Certainly, the ISERROR function exports to .xls. However, it behaves differently in NeoOffice.
Items 1 and 2 function identically in the case of say, ranking a row in which some cells are blanks.
Item 3, when translated using ISERROR to =IF(ISERROR(C32-C88+1),"", C32-C88+1), results in "" (ie error is raised) in Numbers but yields figure 0 in NeoOffice when there is a blank in either of the cells.
I recall from programming school in the mid-1970s that using GOTO statements and On Error branch statements were not admissible as routine programming steps. In fact, we received an automatic fail grade if we used a GOTO or GOTO like construction. So, I have found a more programmatically elegant way to solve my problem: eg:
=IF(C88="","",C32-C88+1)
Curiously, earlier I found/suspect this does not work equivalently in Numbers and NeoOffice:
=IF(ISBLANK(C88),"",C32-C88+1)
When you try using ISBLANK you always get an intuitively unexpected result because ISBLANK ONLY gives TRUE when there is absolutely nothing in a cell. A Formula reference in the cell, even if the function result yields "", gives FALSE... because, according to the definition of ISBLANK the cell contains a formula.
As I tell my students, ALWAYS lookup the HELP on any function you use. ALWAYS test the function to see how it performs!.... and lesson 3: Always test your spreadsheet on different systems.... then hope!
FYI:
Here's a link to my Spreadsheet (Neoffice .xls) and a video explaining its use.
Team Contribution: Introduction (Prototype). (2013). Retrieved from http://www.youtube.com/watch?v=bj87FGLoplk&feature=youtube_gdata_player
I don't guaranteee this link for ever! ... and I continue to "tweak" it
https://www.dropbox.com/s/1jz7gzksejnbqo1/Team%20Contribution.xls

Wingdings not exported correctly in PDF by Crystal Reports XI JRC in Linux

I have a report that contains checkmark and scissor character from Wingdings/Wingdings 2. The PDF file is generated via a program using Crystal Reports' Java Reporting Component. When I am testing it in my machine (Windows), the checkmark and scissors characters are shown correctly. But using our Linux Redhat server generates a "P" instead of the checkmark and a quotation mark instead of the scissors.
With the thought that Crystal Reports XI JRC do font indexing instead of subsetting/embedding, my idea was that there was no installed Wingdings font in the Linux server. I've replicated the case in my Windows machine by removing the Wingdings font.
With that knowledge, I've installed the Wingdings (*.ttf files) font in the Linux server and executed commands like ttmkfdir (as instructed in some tutorials). I've verified that in Applications -> Preference -> Fonts that the Wingdings fonts are selectable. But when I generated again my PDF file, the correct fonts are still not rendered correctly. Is there anything more I need to do for the JRC to recognize the Wingdings font in Linux.
Migrating to the Crystal Reports for Eclipse released last Jan 2009 is not a possible option.

First check is to ensure the Java JVM can see the font. The Java SDK comes with the JFC demo Font2DTest. Do the fonts show up there?
Note that the Java JRE has a lib/fonts directory, where you can place TrueType fonts that the JRE then would use.
Sincerely,
Ted Ueda

Slideshow images will not display correctly on mobile phone

Hello,
I have a website which I used several slideshows, in areas I would typically just used a rectangle and fill with photo. This was done because my client wants to be able to update the images through business catalyst. Unfortunately, when viewed on a mobile phone (I am using iOS 7) the slide show images do not display correctly.
What can be done to fix this? Is there another workaround I should try?
Thanks!

Hi Nicole
The images that you are using on parties page are stretched , if you check the image frame you can see that.
As a result the image frame is stretched over the side image , they are not showing properly. If you resize from Muse end , then also it would not be fixed because Muse remembers the image size as you have inserted and when viewed , Muse stretches the image to original size as how it was inserted.
Please resize the images outside Muse , use any image editor like Photoshop and then use the exact dimension of the image frame on page.
This would resolve the issue.
Thanks,
Sanjit

Audio not exporting with video

Hello-
I am having trouble exporting a H.264 video using the YouTube HD 24 preset, which I have done dozens of times previously. The footage was captured on a DSLR with external sound and synced via plural eyes.
The problem is that the audio, which I can hear in the time line, is not exporting with the video. So far I have tried deleting all project and associated files and starting from scratch but to no avail. Does anyone know why this is happening or what I need to do to troubleshoot/fix?
Many thanks...

Thanks for the reply. I was checking them by playing the export on my iMac. I just imported the video back into PP and there is no audio when played in the system either.

Dotted line is not exported correctly form Indesign to pdf

My dotted lines do not export as exactly round dots but with kind of "erroded" outlines. Has anyone encountered the same problem yet? How can I solve it? I used the "export for high res print preset". Thanx!

With "manually", Bob meant you cannot do it in InDesign (which must make it as good as 'manual', in his opinion ).
Using Acrobat Pro, all you have to do is open the PDF and start the Forms Wizard. It's the top item under the Forms menu. You'll be amazed at how well it does:
All I did was start the wizard and hit "OK"!
(hey! that image was supposed to end up inbetween! jive editor showing a tantrum, again.)

Audio not caturing correctly

Hello there. Ever time I do a Capture Now, the audio never syncs correctly and I get an error message telling me my media's audio is out of sync due to tape and preset samples. How do I fix this? Thanks.

What's the sample rate on the media? This usually shows in most cameras as 12-bit or 16-bit. If it's 16-bit you should use one of the standard presets. If it's 12-bit, you should use one of the 32K presets. And in future you should shoot in 16-bit.

Audio NOT functioning correctly after botched bluetooth headset pair attemp

After trying to connect my bluetooth headset (Motorola HS820) to my Macbook Pro i am having issues with several apps including firefox and mediacentral. Audio from these programs will not play. I get an error message saying there was a problem with my bluetooth audio configuration.. However apps like itunes and skype function correctly..
When attempting to pair my bluetooth headset the bluetooth assistant pairs it succesfully but when it connects it immediately disconnects.. after several attempts at tricking it to connect (advice from posts in mac.com forums) i have given up and deleted these devices from my bluetooth preferences and still have these problems..
I'm assuming there is some config file still in place pointing these apps in the wrong direction?
Macbook Pro Mac OS X (10.4.6) Dual Booter

Just verified Audio is not working for me in safari either...
Example i'm using is any video on youtube.com
Edit: I guess this would be a problem with macromedia flash then?

FLV content embedded in SWF not exporting correctly in In-Design CS6

Hi,
I have an FLV video embedded within a SWF file.
The FLV video plays correctly in the SWF file when exported or previewed.
When the SWF is placed into In-Design CS6 and then exported as an interactive PDF, the SWF operates normally (buttons and pages all working as in the original SWF) except the FLV video does not load at all.
Can anyone advise what's going on?
Thanks for reading!

Hello Joe,
That was a long posting, will start with the Buttons-question: can you check the action 'On Success' of those slide buttons? I couldn't see which version of CP you are using, it is in the properties. Default action is 'Continue' which means that the playhead will play further and finish the total duration of the slide timeline. Change this action to 'Go to next slide'. However for the Question slides you will not have so much control, sorry.
As for the audio issue, I'm a lot less sure, need to know the version of CP first of all. You have to be sure that all patches are applied (certainly if you have CP5). Sometimes it helps to insert a small silence at the end/start of the slide: move the audio or video file to start 0,1sec after the start of the slide and make it finish 0,1sec before the end of the slide. Worth trying if this helps?
Lilybiri
PS: sorry, bit sleepy, you did mention it is CP5. You'll find the actions in the Action accordion of the Properties panel of the button. And check your version, please, there was an important patch released in December. Use Help, Updates. 5.0.1.624 is the present version.

Audio not exporting from Keynote to Quicktime

I have recorded a 50 minute slideshow with a voice-over narration in Keynote. There are mp3 sound files on some of the slides, i.e. short clips of various sounds. When I play back the recorded slideshow in Keynote, my voice-over and the sound clips and visuals work perfectly fine. However, when I export my recorded presentation to Quicktime, only my voice-over and the slides are included in the movie, the sounds clips are missing. All of the transitions and effects work perfectly fine in the movie, it is just the sound clips that are missing. No matter how I save the file in Quicktime I cannot get the mp3 sound clips into the QuickTime movie. My computer is a MacbookPro running OSX 10.9.4 Mavericks, using Keynote 6.2. I just bought Quicktime Pro7 to see if that would help, but it did not. Would greatly appreciate advice on how to get all of audio into a movie, I've spent more than a hundred hours on this presentation. Many thanks.

Yeah, me too. Bump. Can anybody explain this behavior?!?

Slideshow - Stills/Audio Not Exporting Correctly

Similar Messages

Maybe you are looking for