Smart forms not displaying result from sub routine

I am working on a smart form and need to display the description of the fabric code. Under Form Routines, I create a sub routine
FORM fcc_values USING gv_fabrictext.
which is supposed to store the description in gv_fabrictext. GV_FABRICTEXT has been declared in global data as char64. Then I call prior to displaying my table as
perform fcc_values using gv_fabrictext.
And then insert the field &gv_fabrictext& in cell but this does not display any result
I know for sure that this sub routine works as I have tested it separately as a test program. Any ideas?

1. put break point at ssf_function madulename and check field value.
or
2 fm_name export parameter ur not mentioned
or
3 global variable not defined properly
go through above. still if u didnt get
need program where the problem to find.
Message was edited by:
Deepa KN

Similar Messages

Why is Mail 6.2 not displaying messages from my Exchange account?

Greetings,
I have a new 13" MacBook Air running Mountain Lion and I'm noticing that most of the time my Mail inbox is not displaying messages from my work Exchange account; however, it does display messages correctly for my Gmail account. I've included a screen shot of what I'm experiencing.
Any ideas?
Thanks,
Garry

I have the same problem, as does a coworker. It happens, for instance, if I click on another mailbox (such as Junk) then go back to the inbox. Our company uses Exchange. Quitting mail usually fixes it. A rebuild of the mailbox will too. Only happens on my Mac at work, not my Mac at home (connected via VPN).
Another problem I have is with mail not syncing. Mail I have deleted from another device (such as on my Mac at home or my iPad) does not get deleted from my inbox at work. Sometimes they'll go away when I click on them. Other times they won't go away and the only way to delete them is to rebuild the mailbox.
And lately I have had problems with attachments. Attachments sent from my Exchange account at work show up as .eml attachments in my iCloud account and mime attachments on my iPad or as a string of characters (20-30), not as an attachment. This happens whether sent from home or work.
I have our IT department looking into the third problem (which is the most vital one for me). I'll report the other two annoying problems and see what they can figure out.

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

How to Print form using SAP Smart Forms which is migrated from SAP Script?

Hello every one,
     i have a problem in printing form using smart form which is migrate from the SAP Script...so what method i have to use...if any one know the solution for this than plz reply me as soon as possible...

hi
when ever u want to migrate the script to smartform u have to chage the driver program also..
refere this link to convert script to smartform
convert sapscript to smartform
c_formname = u r smartform name...
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = c_formname
IMPORTING
    fm_name            = v_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
...........................CALL SMARTFORM............................
CALL FUNCTION v_fm_name
EXPORTING
    control_parameters   = st_control_parameters
    output_options       = st_output_options
IMPORTING
    document_output_info = st_document_output_info
    job_output_info      = st_job_output_info
    job_output_options   = st_job_output_options
EXCEPTIONS
    formatting_error     = 1
    internal_error       = 2
    send_error           = 3
    user_canceled        = 4
    OTHERS               = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

Smart Form not going as attachment with Email

Hi,
I am configuring actions for support message and email has to be automatically sent to a particular partner based on status of support message.
I am using standard actions and standard smart forms.
The email is also going but without attachment.The mail body is also blank. The subject appears as the name of smart form
When I preview from Actions in transaction, I am able to view the complete smartform.
Is there any settings I have missed out.
In SCOT we have configured SAP Script/ Smart Forms as PDF.
Useful answers will be rewarded.
Regards,
J.Prabananth

Hi
Check for the Processing Type
Form name : CRM_REMINDER_MAIL_01
Processing class : CL_SAMPLE_PROCESSING_CLASS_PPF
Processing Method : COPY_1_OF_EXEC_SMART_FORM
Archive mode : Mail only
Regards
Raj
Please reward if helps!

Forms not displaying after ATG 7 patch

Forms not displaying after ATG 7 patch., 11i Linux OS.
6241631

Hi;
AFAIK no, i also cant see this info at below doc
About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
Please check upper note below part and be sure you have all those steps on your issue:
-Known Issues
-Instructions for Applying Oracle Applications Technology Update for 11i.ATG_PF.H.delta.7
-Implementation and User Documentation
Regard
Helios

I have installed apps Hungry Shark vobec but it does not show me the settings I like it or not even in the game center I have not updated results from it you can not help me thank you

I have installed apps Hungry Shark vobec but it does not show me the settings I like it or not even in the game center I have not updated results from it you can not help me thank you

Hi Marcel1no,
Welcome to the Apple Support Communities!
I understand that it can be frustrating when an application downloaded from the App Store is not behaving as you would expect. In this situation, I would recommend using the attached article for information on troubleshooting apps downloaded from the App Store.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Cheers,
Joe

Why a field with javascript formula is not displaying result on .pdf form

I have created a .pdf form from an exel file.
I have assigned java script formula such as
if (QtyRow1 > 0) { QtyRow1, €UPRow1;}else{€TotalPriceRow1="";}
Problem is, result is not displayed on form.
What should I do?
J'ai créer un formulaire en format .pdf depuis un fichier exel.
J'ai assigné une formule dans le script de calcul personnalisé:
if (QtyRow1 > 0) { QtyRow1, €UPRow1;}else{€TotalPriceRow1="";}
Mon problème est que le résultat ne s'affiche pas sur la forme.
Que dois-je faire pour remédier à ce problème?
Merci

The idea behind the formula might be correct, but you can't just invent
your own syntax and expect it to work...
On Thu, Jan 29, 2015 at 9:06 PM, christophef13812813 <

Rich text box used in Infopath Form not displaying option to get images from Computer

Hello,
We have used "Rich text box" in Infopath Form which is not displaying option to get images from Computer.
Options available are : From Address, From SharePoint
But if we Rich text box in list, then it works fine with "From Computer" option.
can you please help me out to get this option.
Thanks in advance.
REgards,
Jayashri

Hi,
From your description, there is no “From Computer” option to get images with rich text box in InfoPath form.
Per my knowledge, by design there are “From Address” and “From SharePoint” options without “From Computer” option in rich text box in InfoPath form. As a workaround, you can develop a custom InfoPath Rich Text box to do it.
About developing a custom InfoPath control, I suggest you create a new thread on the forum “Visual Studio Tools for Office”, more experts will assist you with InfoPath development.
Visual Studio Tools for Office:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
Thanks,
Dean Wang

Adobe Reader Forms not displaying .................URGENT

We system copy from Windows system to Solaris System , Adobe Interactive forms are not displaying in Solaris , where as in windows they are working fine ......Any settings or configuration settings needed?????????
1)           When I test ADSUser in webservice navigator , I am getting the following error :
HTTP/1.1 200 OK
Connection: close
Set-Cookie: <value is hidden>
Set-Cookie: <value is hidden>
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Wed, 20 Feb 2008 10:12:21 GMT
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><rpl:rpDataResponse xmlns:rpl='urn:AdobeDocumentServicesVi'><rpl:Response xmlns:pns='urn:com.adobe'><pns:rpStreams></pns:rpStreams><pns:rpStrings><pns:RpString><pns:name>Error_Level</pns:name><pns:value>0</pns:value></pns:RpString><pns:RpString><pns:name>Results</pns:name><pns:value>Processing exception during a "checkDocument" operation.
Request start time: Wed Feb 20 13:12:21 AST 2008
com.adobe.ProcessingException: Required stream: "PDFDocument" not found in request OR its length is zero.
Exception Stack Trace:
com.adobe.ProcessingException: Required stream: "PDFDocument" not found in request OR its length is zero.
     at com.adobe.ads.request.Request.checkDocument(Unknown Source)
     at com.adobe.ads.request.Request.setUpOperations(Unknown Source)
     at com.adobe.ads.request.Request.process(Unknown Source)
     at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
     at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
     at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
     at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
     at SoapServlet.doPost(SoapServlet.java:51)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
</pns:value></pns:RpString><pns:RpString><pns:name>VersionInfo</pns:name><pns:value>800.20070708051308.406522</pns:value></pns:RpString><pns:RpString><pns:name>TraceString</pns:name><pns:value>   com.adobe.ProcessingException: Required stream: "PDFDocument" not found in request OR its length is zero.
</pns:value></pns:RpString></pns:rpString
2) When I run the application I am getting the following error:
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Processing exception during a "UsageRights" operation. Request start time: Wed Feb 20 13:09:03 AST 2008 com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights Exception Stack Trace: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights at com.adobe.ads.operation.UsageRights.execute(Unknown Source) at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source) at com.adobe.ads.operation.CachableOperation.doWork(Unknown Source) at com.adobe.ads.request.Request.processOperations(Unknown Source) at com.adobe.ads.request.Request.process(Unknown Source) at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source) at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source) at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126) at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157) at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79) at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92) at SoapServlet.doPost(SoapServlet.java:51) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:400)
    at com.sap.tc.webdynpro.pdfobject.core.PDFObject.render(PDFObject.java:3948)
    at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRenderHandler.handle(PDFDocumentRenderHandler.java:148)
    at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
    at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:100)
    ... 31 more
Thanks ,
srinivas

Hi Sriniwas,
Try checking your Credentials for ADS. Seems that either your credential file is invalid or not installed properly.
Refer to the following guide for configuring the ADS.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/06717aea-0c01-0010-b28f-e6494458788f
Regards,
Arafat
xxxxxxxxxxxxxxxxxxxx
Edited by: Armin Reichert on Feb 23, 2008 6:26 PM

HTML Form Not Displaying Correctly in Outlook 2010 (Exchange 2013)

Hello,
I have recently migrated to Exchange 2013. Clients are still using Outlook 2010. There is an application that automatically sends an HTML form by email for the users to fill in. The form consists of radio buttons, text areas and drop down list. However,
in Outlook 2010, the form is not rendered properly.
When I clicked the "If there are problems with how this message is displayed, click here to view it in a web browser" link, the email is opened in
IE and the form is displayed correctly.
I also tried opening the same email in other clients, such as Thunderbird, Apple Mail Client and in mobile phones - the form is displayed correctly. I wonder
why it fails to do so in Outlook 2010. The user mentioned that this does not happen in Outlook 2003 and prior to migration (I used Exchange 2010 previously). I have also tried using OWA, but the form does not display correctly
Any help?
Note: I can't attach any images or links as it is mentioned that my account is not verified yet. I will post some screenshots when it is possible to do so

Hi
Outlook 2007 or newer use Microsoft Word for their HTML engine.
You can refer this page http://www.campaignmonitor.com/css/ shows
many things that do not work in different clients.I think Someone needs to re-code
the HTML form to make it work in the current versions of Outlook. You can try formatting with text and HTML and see the results.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

ADS configuration error - PDF form not displaying for Java WebDynpro

Hi Experts,
Sub : Problem with configuring Adobe Document Services
We have installed .. NW2004s SP12 on HP-UX OS.
As of now all the services are working fine, recently started configuring "Adobe Document Services", followed all the instructions given in the guide.
Environment :
=============
- Configuring ADS Webservice for "BASIC" Authentication, not for SSL
- Poratl (AS JAVA) and BI (AS ABAP) are running in different systems.
- Portal using UME as the data storage.
- OS is HP-UX
Configuration Check for Interactive Forms in Web Dynpro for Java
=================================================================
1. Checking the User and Password ---
http://<server>:<port>/AdobeDocumentServices/Config -- the system displays the version number of the Adobe document services in the response area.
2. Configured Webservice for Basic Authentication -- success
In the process of testing this configuration -- i've developed a Java Webdynpro interactive form and deployed into my DEV server (NW2004s Sp12).
Unfortunately, form is displaying in my sneak preview version (Nw2004s SP9), getting error when deployed into Dev server - NW2004s SP12 on HP-UX.
We haven't installed ADS separately, making use of ADS comes with the default installation.
Error :
=======
java.net.SocketTimeoutException: Reatimed out
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
I found that the following directory is empty in DEV server ... /usr/sap/EPL/JC03/j2ee/os_libs/adssap/XMLFormService, but not in sneak preview version.
Please do let me know to solve the problem.
Thanks

Thanks for quick response.
Installed Reader in my PC, i can view the deployed interactive form thru sneak preview, but getting the following error when running the same application thru my development server.
java.net.SocketTimeoutException: Reatimed out
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
I've installed Adobe Reader in the client PC not is the server system.
Thanks
Message was edited by:
Mohan krishna Mallepaddi

Boookmarks folders do not display correctly from toolbar

The folders in my bookmarks toolbar only display as a small white square when I click on them. Even when I try to display them from the Bookmarks menu. They are present because I can right click and choose "open all in tabs" and they will all open but I can't select individually or open a folder to see sub folders. I have tried deleting places.sqllite and localstore.rdf but that doesn't help. Deleting Places.sqllite allowed me to see one folder's contents but no sub folders. Then when I closed and reopened FF even that folder view was corrupt. I'm using FF4.01 on a windows 7 x64 home premium desktop.

Not sure what happened but somewhere between version 7 and version 8 this corrected itself.

BUG : FORMS not displaying values stored in FLOAT datatypes.

APEX 2.2.1.
Error occurs on both V9.2.0.4 and V10.2.
I'm working on a "report with form" combination and have been fighting a problem where the data entered into a form will save correctly and show in the report, but when you choose to edit the record to update it, the value will not display in the form at all.
I went round and round, and finally discovered that the problem had to do with the FLOAT datatype being used to store the data.
When creating a default "Report with Edit form" on the following two example tables, the form works correctly with SLA_SCHEDULE2 but not with SLA_SCHEDULE1
CREATE TABLE SLA_SCHEDULE1
ID NUMBER NOT NULL,
NAME VARCHAR2(128 BYTE) NOT NULL,
TRACING_PERCENTAGE FLOAT(126),
RUNS_PER_PERIOD NUMBER,
SECONDS_PER_PERIOD NUMBER,
SCHEDULE_TYPE VARCHAR2(16 BYTE) NOT NULL
CREATE TABLE SLA_SCHEDULE2
ID NUMBER NOT NULL,
NAME VARCHAR2(128 BYTE) NOT NULL,
TRACING_PERCENTAGE NUMBER,
RUNS_PER_PERIOD NUMBER,
SECONDS_PER_PERIOD NUMBER,
SCHEDULE_TYPE VARCHAR2(16 BYTE) NOT NULL
The only workaround I have so far is to change the datatype of the column.
Doug

Based on the advice Scott gave above, I've created this function...
CREATE OR REPLACE FUNCTION Get_Float_Value
p_table_name           VARCHAR2,
     p_float_column_name     VARCHAR2,
     p_key_id_name          VARCHAR2,
     p_key_id_value           VARCHAR2
RETURN FLOAT IS
TYPE FLOAT_CURSOR IS REF CURSOR;
f_cur FLOAT_CURSOR;
FLOAT_VALUE FLOAT(126);
SQL_STMT VARCHAR2(500);
BEGIN
     SQL_STMT := 'select :a from :b where :c = :d';
     SQL_STMT := REPLACE(SQL_STMT, ':a', p_float_column_name);
     SQL_STMT := REPLACE(SQL_STMT, ':b', p_table_name);
     SQL_STMT := REPLACE(SQL_STMT, ':c', p_key_id_name);
     SQL_STMT := REPLACE(SQL_STMT, ':d', p_key_id_value);
OPEN f_cur FOR SQL_STMT;
     LOOP
     FETCH f_cur INTO FLOAT_VALUE;
     EXIT WHEN f_CUR%NOTFOUND;
     RETURN FLOAT_VALUE;
     END LOOP;
     RETURN NULL;
END Get_Float_Value;
This allows you to call the function ANYWHERE you use a FLOAT, without having to create one function per table/column you might need to use it against.
I know that I could have used a 'USING' statement on the cursor to do the replacements, but I always find it easier to debug replacement values using the REPLACE function.
Doug

UIX page not displaying data from VO's

I have an application where my users log in by passing a username/password to a client method in my application module. The Webusers View Object has a view link to the Customers view object, which has a view link to the Orders view object, which has a view link to the OrdLines view object, like this:
WebusersView
--CustomersView via WebCustViewLink
----OrdersView via CustOrdViewLink
------OrdLinesView via OrdOrdlinesViewLink
I've run this Application Module through the tester and I can see data via all the View Links.
I have the following code in my login() script:
w = getWebusersView();
w.setWhereClause("login = '" + username + "'");
w.executeQuery();
I've stepped through the login() code and it works correctly. If I understand BC4J correctly, then all of the View Links should fire and coordinate the data from Customers, Orders, and OrdLines when this query executes successfully.
I created a UIX page and did a drag/drop of Orders to the page as a read-only table. I found the Orders table by expanding the Webusers entry in the Data Control palette, then the Customers entry below that, to grab the Orders entry there. I think this means that it will follow the WebCustViewLink to get the Customer that goes with the Webuser, then the CustOrdViewLink to get the Orders for that Customer. Is this correct?
When I try to run this and display the table, I get no records. I know for a fact that records exist under the Webuser username I've chosen.
What is wrong? Why doesn't my UIX page display the appropriate Orders based on the Webusers->Customers->Orders view links?

If there, try removing the $. at the beginning of the binding that gets puts there if you select the item from the pop up list.
I have a text field that is read only and bound without the $. that was working fine for displaying data. I have a drop down that had the $. and was not saving. I removed the $. and now it is getting saved to the XML. However, it does not display on the next render of the form.

Smart forms not displaying result from sub routine

Similar Messages

Maybe you are looking for