Smartform programming line different from the function

Hello genius.
I edit a smartform in DEV system. and just add some codes.
after I transport to QA system. the code what i add is in the programming line right.
in QA this smartform create a function /1BCDWB/SF000000123,
but in this function, I found the form with my programming line is not same as the code in programming line.
please get some help.. thanks..

Hi
Do not see the Same function Module that the smartform has generated in DEV and QAS , bcz a new FM will be generated for Each client . the FM generated in DEv will be Diff from QA and in ur Print Program use the SSF.FUNCTion... and use the FORM_NAME instead of calling the call function '/bcd/.....'
surya

Similar Messages

How to use parameter option in smartform program line.

HI all,
how can i give parameter for matnr directly in smartform program line, it wont take gives a dump
i don wanna create a separate driver program for that.
Error in the ABAP Application Program
The current ABAP program "/1BCDWB/SF00000001============FT" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1BCDWB/SAPLSF00000001 " in
include "/1BCDWB/LSF00000001F01 " in
line 539:
"You can only use "PARAMETERS" for programs other than type 1 between B"
"EGIN/END OF SCREEN."
The include has been created and last changed by:
Created by: "SAPUSER "
Last changed by: "SAPUSER "
how can i solved this.
Kavinath B.

Hi,
You can not code
SELECTION-SCREEN BEGIN OF BLOCK.
SELECT-OPTIONS selcrit FOR (name).
SELECTION-SCREEN END OF BLOCK.
like this in smartform program line it wont allow
all you have to do is create a driver program
for smartform create a selection screen and call smartform by
n pass variables or internal tables.
call function 'SSF_FUNCTION_MODULE_NAME'
    exporting
      formname                 =
*     VARIANT                  = ' '
*     DIRECT_CALL              = ' '
*   IMPORTING
*     FM_NAME                  =
*   EXCEPTIONS
*     NO_FORM                  = 1
*     NO_FUNCTION_MODULE       = 2
*     OTHERS                   = 3
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
I hope it will help u
Ketan.P

Can anybody help me in finding the reasons why the time of email received are different from the one on my macbook which time is correct

Hi
Can anyone help me in finding the reason why the date on e=mail reced is different from the one on my MacBook eventhough it is correct
Thanks

Try this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2

How can i AppendText to richTextBox only if the text is new(different) from the text that is already in the richTextBox ?

Code
public void ScrollNews()
listsext.Ext(page);
combindedString = string.Join(Environment.NewLine, ListsExtractions.myList);
richTextBox1.SelectAll();
richTextBox1.SelectionAlignment = HorizontalAlignment.Right;
richTextBox1.AppendText(combindedString);
scrollerText = string.Join(Environment.NewLine, ListsExtractions.myListWithoutLinks);
scroller1.TextToScroll = scrollerText;
if (NewsLevels.newsLevel && NewsLevels.shouldStart)
UpdateTextControls();
scroller1.Start();
NewsLevels.shouldStart = false;
if (NewsLevels.newsLevel == false && NewsLevels.shouldStart)
UpdateTextControls();
scroller1.Start();
NewsLevels.shouldStart = false;
string[] rlines = richTextBox1.Lines;
richTextBox1.SelectionStart = 0;
richTextBox1.SelectionLength = rlines[0].Length;
richTextBox1.SelectionColor = Color.Red;
richTextBox1.Select(rlines[0].Length, rlines[1].Length + 1);
richTextBox1.SelectionColor = Color.Green;
RedColorAlert1();
if (lines == null)
label5.Text = "0";
else
label5.Text = lines.Length.ToString();
The line is:
richTextBox1.AppendText(combindedString);
I'm calling this method ScrollNews every X minutes with a timer.
The way it is now it will AppendText all the time. But i want it to Add the combinededString only if the text in combindedString was different from the text that is already in the richTextBox. Somhow to keep all the time the last text and compare it and
if there is a new text then appen it.

public void Scroll()
listsext.Ext(page);
combindedString = string.Join(Environment.NewLine, ListsExtractions.myList);
richTextBox1.SelectAll();
StringBuilder sb = new StringBuilder();
sb.Append(combindedString);
richTextBox1.SelectionAlignment = HorizontalAlignment.Right;
richTextBox1.AppendText(combindedString);
The problem is that now it will keep adding to the richTextBox the content in combindedString over and over again. I need somehow to check each time if the content in combindedString already exist in the richTextBox if not meaning it's new content then AppendText
it.
If it's the same already exist do nothing don't add it.
EDIT
I write to a text file the content of the ombindedString variable .The first content the lines is the combindedString:
המשטרה עצרה אמא ל2 ילדים קטנים שבעלה נעצר בחשד למעורבות בעלה בכריתת עצים
15:03 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189935.shtml
אדם החשוד בעבירת מין בקטינים נעצר לאחר שהתלונן על 2 שסוחטים אותו על רקע מעשיו
14:50 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189932.shtml
אינדונזיה: 5 הרוגים בקריסת האנגר בנמל תעופה
14:44 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189930.shtml
אום אל-פחם: מספר חשודים עוכבו בחשד למעורבות במימון טרור
14:04 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189914.shtml
אלמנתו של רפ''ק ג'דעאן אסעד, שנרצח בפיגוע הדריסה, ילדה בן
13:05 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189884.shtml
תנאי ליברמן לכניסה לממשלה עונש מוות למחבלים חובת חתימה על מסמך נאמנות
12:39 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189868.shtml
תלמיד תיכון מרחובות חשוד שהפעיל מעבדה ביתית לזיוף תעודות זהות ואישורי מחלה
12:03 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189856.shtml
הצביעות של רענן שקד: האשים את אמהות 3 החטופים ומגנה את חגי הוברמן
11:43 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189848.shtml
And this is a screenshot i couldnt copy the text of the richTextBox1.Text
richTextBox1.Text content image
co uld be that the format of the text in the combindedString and the richTextBox1.Text looks different so it think it's not exist ?
Update:
Not sure if it's important but the combindedString i'm adding the text to it from the variable ListExtractions.myList
myList is List and i build this List like that:
private void ListToStringList(List<string> myl)
for (int i = 0; i < AllNews.Count; i++)
myl.Add(AllNews[i].text);
IFormatProvider provider = CultureInfo.InvariantCulture;
DateTime myTime = DateTime.ParseExact(AllNews[i].original_time, "DyyMMddTHHmm", provider);
string results = myTime.ToString("HH:mm דווח במקור בתאריך : dd.MM.yy : שעה");
myl.Add(results);
myl.Add(AllNews[i].link);
myl.Add(Environment.NewLine);
myListWithoutLinks.Add(AllNews[i].text);
myListWithoutLinks.Add(results);
myListWithoutLinks.Add(Environment.NewLine);
for (int i = 0; i < myl.Count; i++)
myl[i] = Regex.Replace(myl[i], @"\t|\n|\r", "");
And use it:
ListToStringList(myList);

Not cleared two line items from the GR/IR clearing

For one of the items in PO following transactions are done...
        Mtype   Date            Quantity             Amount
GR   101    06/14/09        1 02.001            887.85
GR   102    06/14/09        102.001-            887.85
GR   101    06/14/09        101.999             887.85
GR   101    07/22/09        102.001             923.61
IR-L            06/14/09        102.001            887.85
IR-L            06/14/09        101.999            887.85
FBL3N: out put
Open items
Doc Type Date                           Amount
WE           06/14/2009 86            887.85
WE           07/22/2009 96            923.61-
Cleared items:
Doc Type Date                           Amount
WE            06/14/2009 96              887.85-
Z9             06/09/2009 86              887.85
WE            06/14/2009 96              887.85-
Z9             06/09/2009 86              887.85
System has not cleared two line items from the GR/IR clearing for this line item in PO.
What could be the reason these items are not cleared and now how these line
items can be cleared?

Hi,
When the Dr and Cr amount are equal to zero system will automatically clear the line items in F.13. Here the open items are appearing with different amounts due to that system not able to clear.
By passing some manual JV or something you done to make Dr and Cr equal to zero then you clear through F-03(untick post automatically for this clearing in T.cdoe FS00)
Regards,
Sankar

Vision Acquisition Software installed, BUT why is the IMAQdx missing from the function palette?

I just installed to the labview 2011, and many other modules and softwares including this VASAugust2010. But the IMAQdx is missing from the function palette (vision and motion). However the NI-IMAQ 4.5, IN-IMAQ IO 2.4.0 and NI-IMAQdx 3.7 are all clearly listed as installed in the NI software (contorl panel -> program - NI). In MAX, my usb webcam is also listed as NI-IMAQdx Devices and works well under MAX. But my own program is broken because the LV can't find those functions. So why the IMAQdx funtion is missing and how to fix it?
Thanks,
Lei

hi tommy
check this may helps you http://digital.ni.com/public.nsf/allkb/A451D3CCBB740716862578FC004DB392
Sasi.
Certified LabVIEW Associate Developer
If you can DREAM it, You can DO it - Walt Disney

Why is the library on my phone different from the one on my computer (I have iTunes Match)

Why is the library on my phone different from the one on my computer? (I have iTunes Match) I just want the song off my computer to be the songs I have on my phone.

Hey there Sparkly3gs,
It sounds like your camera is not rotating as expected in the camera app. I want to recommend starting by quitting the running apps on the phone.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
I would suggest before restoring from your backup setup the device as new and make sure the camera functions as expected. Then restore from your backup and verify it still works.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Function modules from the function pool Z_MEREP_G (Message no. MEREP_00530)

We installed a new system and imported the syncbo definitions to this new system.
After the import and generation of all T01 SyncBOs we get an error. E.g. for MAM25_016:
Function modules from the function pool Z_MEREP_GEN_T01_MAM25_016 contain syntax errors
Message no. MEREP_00530
After investigation the following syntax error is shown:
Source code LZ_MEREP_GEN_T01_MAM25_016U04 Line 641
The FORM "MAM25_016_CONV_NAME" does not exist, but there is a FORM with the similar name "MAM25_016_I_CONVERSION".
"MAM25_016_I_CONVERSION".
We are already using three systems D -> Q -> P. The export/import of files between these systems work okay. But not with the new system. All are on NW04 SPS 18. In the other systems the form is available.
Does someone have an idea how to solve this?
Thanks in advance,
Benjamin de Rijke

Hello Rahul / Karthick,
Thanks for the tip, I already reimported these with no effect. Next to this I deleted the function modules for a Z-syncbo (our own developed one). But this didn't help as well. The MAM-SyncBO function group can not be deleted because the system is not a developement system. We are not allowed to develop things in this environment.
I have the feeling that it has something to do with the initial setup of this system. All the others were first on SPS15 were we developed the SyncBOs. At a certain time we updated the systems to SPS18 and developed further. No issues so far regarding the import / export of the files from D to Q and P.
Now we initial installed a new system on SPS18 and on this one the generation failes with the mentioned syntax error.
Kind regards,
Benjamin

Can i Match invoices with a currency different from the purchase order curr

Dear Valued Consultant,
Can i Match invoices with a currency different from the purchase order curr
Thanks

Hi,
As a functionality, Payables will not allow matching an invoice to a purchase order that is in a different currency.
Refer Oracle Public sector payables user guide for 11i (page 4-94).
I understand that there is an enhancement request (3286623) logged for this functionality.
Please refer Note:172291.1
- Thiagu

PERSG previous bet different from the current PERSG using info-type pa0000

Hi Friends,
Please guid me how get the PERSG previous bet different from the current PERSG
using info type pa0000.
Regards,
Durga

Folks,
even after having repaired the inbox folder under "properties" a few times, I still had some e-mails where the contents are different from the subject line.
In other words in the inbox there are two e-mails: one with subject line "abc", and another one with subject line "def".
When I display the e-mail with the subject line "abc", the contents are from the e-mail with the subject line "def" in the in-basket.
What else can be done to correct this problem?
Thanks and best regards.
Fred Kunz-Shirzad
Chemin Ronzeures 6A
1297 Founex VD
Switzerland
[email protected]

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

How to delete a line item from the sales order

Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
Kumar

Hi
U can do this in two ways one u can short close the order by entering Reason for rejection in VA02 at header level and if yr order is multiple line item order u can enter the reason for rejection in any of the line item which u don't want to deliver.
This is called short close ( as the qty is not delivered fully).
Thx.

Why does Photoshop display colors differently from the other applications even in sRGB mode ?

Hello all !
Here is my problem :
Photoshop is set to use sRGB workspace (in edit/colors.../workspace/RVB).
If I understand correctly this is how all native windows applications work.
This means Photoshop and the other applications should display the same colors on a file with a sRGB profile.
Now this is the case until I calibrate my monitor.
When I do, Photoshop colors become different from the other applications (irfanview, explorer, browsers...).
The only way I found to let everything display the same colors is to set Photoshop to use Proofing/RVB Monitor.
What upsets me even more is that Photoshop colors look "better" to me (dark grays seem to dark to me in the other applications.)
I have read that this is because Photoshop takes the new profile into account and others applications do not. But I don't think this is relevant here because everything is in sRGB so the only profile is my monitor's and I think calibration is handled globally by windows : everything (including browsers, explorer, and Photoshop) changes color if I choose to apply the monitor's profile or not with windows color management tool ("use my parameters for this device").
Here is my system configuration :
- Photoshop CS4 (11.0.2)
- Windows 7 64 bits
- HP ZR2440W and DELL 2209WA (these are not wide gamut screens)
I have spent two days trying to figure the logics behind this and really am upset. Any help would be greatly appreciated. Don't hesitate to ask me if there is something that is unclear or some information I forgot to mention.
Thanks in advance,
Yannick

That sounds like an invitation to continue to talk about the issue. Fair enough.
I'm not sure where you're getting "insecurity"... I am just trying to help you help others more effectively.
I invite you to re-read just the first sentence of what you wrote very carefully, putting yourself in the shoes of someone struggling with both the terminology and the concepts:
Photoshop (CMS) reads an embedded ICC profile and CONVERTS it to the custom monitor profile for a theoretical 'true color' display
Think about what "Photoshop (CMS)" might mean to a person who doesn't know the acronym might stand for "Color Management System" (which is I assume what you meant). Adobe themselves don't call it "CMS", they use the acronym "CMM" (Color Management Module). The term "CMS" is used in the computer industry for about a dozen different things.
While a color profile might have been embedded in an image file before it was opened by Photoshop, Photoshop works on documents. A profile is not "embedded" in a document, it is maintained by Photoshop with the document and describes the color values in the document. If Photoshop opens a document without an embedded profile, depending on settings and user choices it might assign a profile or it might even operate on the document without color-management. Oversimplification doesn't help people when they're trying to learn new things unless it's described as such, for example, "This is a bit of an oversimplification..." or "Generally speaking..."
Not every monitor profile is a "custom monitor profile". Quite often a standard profile (e.g., sRGB IEC61966-2.1) is associated with a monitor by the operating system as a default, or a factory profile is installed by a driver package or system update. Your use of the term "custom" is a bit ambiguous and could be read as implying the creation of a profile using a calibration and profiling device specific to the particular monitor.
Photoshop's color management code does not convert an embedded ICC profile at all (read carefully what you wrote). As I said, it transforms color values. That was the key error in your description that prompted me to comment.
If ever there is a time to pick words carefully, it's in a color-management discussion.
-Noel

Purchase order contains an order price unit that differs from the order uni

Purchase order contains an order price unit that differs from the order unit
Treatment at the time of "Goods Receipt" so that the stock maintained in Kg and at the same time the purcahse order unit is also to be entered at the time of GR.

the purchase requisition has your valuation, this is not the price you have with your vendor.
The valuation in the PR, is automatically copied from material master, dependend on the price control, it is either the moving average or the standard price, the valuation of your current stock. If MAP then this valuation was calculated by historic stock values and receipts from maybe several vendors.
the valuation is mainly used for the release procedure.

HT4483 One of the programs I purchased from the Mac App Store not there

One of the programs I purchased from the Mac App Store not there how can i faund

Where is it missing from? Your purchases list?
You may have accidentally hidden it. Follow the instructions in the link below.
iTunes Store: Hiding and unhiding purchases
Have you checked your applications folder?

Smartform programming line different from the function

Similar Messages

Maybe you are looking for