Smartforms Debugging

How to attach break point at loop statement in smartforms.

Hi Manmeet,
Follow these steps.
1. Execute the smartform.It will open a FM in se37 screen.
2. Press Display.
3. Press find(CTRL+F).
4. Enter command here at which you want to put the break point.
5. Select the radio button 'in main program'.It will open the point at which you want to put the breakpoint.
6. Put the breakpoint here and execute the smartform again.It will stop at the point where you put the breakpoint.
If you face any problem reply this thread.
Regards,
Mukesh Kumar

Similar Messages

Smartform debugging problem

Hi Experts,
How to debug smartform in quality. can anybody explain me....
Thanks
rajesh

dear
Do one thing apply the breakpoint in smartform where u r getting the problem and execute directly u will come to that point .
Else execute u will get long string name in function module screen :
Goto to the display mode and then put the break point
this will also do
thanx
-ankit

SAP script & smartform debugging

Hi experts
can u plz give me the step by step procedure for debugging the SAP script and smartform
regards
venkat

Hi,
They are two ways to debug the SAPScript.
1). Use Tools - Word Processing - Layout Set (SE71). Enter
name of layout set and then Utilities - Activate Debugger.
It is of no consequence which layoutset you enter when
selecting the SAPscript debugger. (Menu path:
Tools-Wordprocessing - Forms, Utilities - Activate Debugger)
The next layoutset called will invoke the debugger.
2). Another way to set the SAPScript debugger is to run
program RSTXDBUG.
When you debug Print program it is same as you debug any
other ABAP program. While when you debug SAPScript, you
actually debug the code ( scripting) you have written
SAPScript Form.
DEBUG Smartform:
One way to debug smartform is to debug the Function Module of
that smartforms. If you want to debug particular smartform
node that the solution would be, insert a "Program Line" just
above the node you want to debug and this program line write
a normal abap breakpoint. So whenever you call the
smartforms, it will stop at this breakpoint and you can debug
onwards.
another way is SFTRACE can be used for debugging SMARTFORMS
for details refer this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
rgds,
latheesh

Smartforms debug

Hello,
how to debug smartforms.
i need the steps for debugging smartform.
regards,
karan

Hi Karan,
Follow these steps.
1. Execute the smartform.It will open a FM in se37 screen.
2. Press Display.
3. Press find(CTRL+F).
4. Enter command here at which you want to put the break point.
5. Select the radio button 'in main program'.It will open the point at which you want to put the breakpoint.
6. Put the breakpoint here and execute the smartform again.It will stop at the point where you put the breakpoint.
Use SMARTFORM_TRACE to trace smart forms.
Thanks,
Vinay

Smartform debug when no preview avail

How to debug the smartform when the form have no print preview option ,it is triggering based on order type . which is printing directly, its not have an option to see the preview.
Generally, when we select the print preview iption it goes to debug mode. but here is not be the case.
Let me know the answer at the earliest.
Regards
RAj.

Hi Kiran,
i have seen ur Documentation Posted on SDN related to LSMW with BAPI
its good and started practise on this , but i struck at
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
i dont understand what details i should give (i tried with different inputs , but its not correct , how could i know correct input ), is there any input values that are working for u and same me too........(its just for practising).
please give any input that should work in my system.
Thanks in advance
Naveen khan

SMARTFORM - Debug - SFTRACE???

Hi Experts,
Just curious to know that,
I know debugging smertfoms via break my_user_id or break-point and SE80 methods. Now, I tried SFTRACE, but, getting the message that, Trace culd not b read from DB
I went like, SFTRACE-->Switch On
ME23-->Issue output,
But, not getting the trace??
can you plzz tell me in detial about, step-by-step (I checked previuos threads, but did not understand them)
Tcode - SFTRACE
Correct name is SMARTFORM_TRACE.
How to get it done?
thanq.
Message was edited by:
Srikhar
Message was edited by:
Srikhar

Hi Srikhar,
Debug the Function module which the SMart form generate , help you to recognize the bugs.
Please award points.
Thanks
Mithun

How to debug a smartform?

I am facing deffficulty.. while debugging the my smartform.
this is called in e-recruitement portal.. i tried with smartform_trace and break-point and all.
how to do this?
Please help me.
Thanks

Hi
DEBUG Smartform:
1) One way to debug smartform is to debug the Function Module of that smartforms.
If you want to debug particular smartform node that the solution would be,
insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint.
So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
2) SFTRACE can be used for debugging SMARTFORMS.
Read More here.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
Re: How to Debug a Smartform
Debug of smartform and sapscript.
Debugging SmartForms
LOGO on Smartform
1) In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
4) Select any picture and set its Resolution in DPI
5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and position of the Logo
6) Set any other parameters if required, save and activate.
7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
8) Use TCode SE78 to upload new pictures and logos.
look at Thread Dynamic Graph in smartforms
Refer the links also -
Re: Dinamic Graph in smartforms
How to get file perperties in Unix server

Debugging in smartforms

Hi
Can any one send me the snap shots of Smartform debugging.
Thanks in advance.
Useful posts will be rewarded.
Regards,
Archana

Hi,
Set the break point in initialization(Global Definitions--> Initialization) of smartform as :
BREAK <USERNAME>. --Works for particular user.
Please don't use BREAK-POINT this will apply all the users who are testing the smartform.
Program stops at break point. After that use Serach and set more break points.
>Search the program logic/Textelement/Address via search and set the break point at that code.
See the Below thread for how to debug the Smartforms
How to Debug Smartform?
Re: debug of smartfrom
Regards,
Priyanka.

Debugging the scripts and smartforms

Hi,
Please Tell me How to debug the SAP SCRIPTS and SMARTFORMS.
Thank in advance
Ajay

DEBUG Smartform:
1) One way to debug smartform is to debug the Function Module of that smartforms.
If you want to debug particular smartform node that the solution would be,
insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint.
So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
2) SFTRACE can be used for debugging SMARTFORMS.
Read More here.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
Re: How to Debug a Smartform
Debug of smartform and sapscript.
Debugging SmartForms
LOGO on Smartform
1) In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
4) Select any picture and set its Resolution in DPI
5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and position of the Logo
6) Set any other parameters if required, save and activate.
7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
8) Use TCode SE78 to upload new pictures and logos.
look at Thread Dynamic Graph in smartforms
Refer the links also -
Re: Dinamic Graph in smartforms
How to get file perperties in Unix server
SMARTFORM-> execute->execute->pass values if require to import & table parameters ->execute-> on the pop up window give Printer name as LP01 and press print preview.
For debugging -
1. Write BREAK POINT in the code window.
2. Put a break point on the call function in the driver program
3. Put a break point in the generated Function module.
OR
1) DEBUG Smartform:
1) One way to debug smartform is to debug the Function Module of that smartforms.
If you want to debug particular smartform node that the solution would be,
insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint.
So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
2) SFTRACE can be used for debugging SMARTFORMS.
Read More here.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
OR
Four ways you can debugging.....
1.place SFTRACE inplace where we enter T_CODE and press ENTER.
after that press F8.
2 ./H
3 /SH
4.after generating the function module there is a button DEBUGGING
Refer to these related threads
smartforms debug
Smartforms debug
How to debug Smartforms?
How to Debug the Smartforms
Re: Smartforms Debug
Smartforms
In the Smartform, within the Code Node you can hardcode a normal abap Break Point ..
Please set a break point in side the smartform:
BREAK <USERNAME>.
Then at the time of print/ preview the program stops there.
Example : If you set the break point in initializationas
BREAK <USERNAME>.
Program stops at break point. After that use Serach and set more break points.
>Search the program logic/Textelement/Address via search and set the break point at that code.
Other way to debug smartform is to debug the Function Module of that smartforms. If you want to debug particular smartform node that the solution would be, insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint. So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
or
SFTRACE can be used for debugging SMARTFORMS.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
See the Below thread for how to debug the Smartforms
How to Debug Smartform?
Re: debug of smartfrom
Smart forms
They are two ways to debug the SAPScript.
1). Use Tools - Word Processing - Layout Set (SE71). Enter name of layout set and then Utilities - Activate Debugger.
It is of no consequence which layoutset you enter when selecting the SAPscript debugger. (Menu path: Tools-Wordprocessing - Forms, Utilities - Activate Debugger) The next layoutset called will invoke the debugger.
2). Another way to set the SAPScript debugger is to run program RSTXDBUG.
When you debug Print program it is same as you debug any other ABAP program.
While when you debug SAPScript, you actually debug the code ( scripting) you have written SAPScript Form.

Can we debug the smartform if yes how can we debug

can u give me briet explanation abt debugging of smartform

HI
In the Smartform, create a Code Node and within the Code Node you can hardcode a normal abap
Break Point.
SMARTFORMS DEBUGGING
For smartforms debugging you can do this.
1. Execute the smartform (execute button in SMARTFORMS transaction)
2. Take the generated function module and display it in SE80.
3.Find the smartforms Elements (text elements, windows, code lines, loops) in this and set Soft break points.
Correct name is SMARTFORM_TRACE. You have lots of options for adequate analysis
Tcode - SFTRACE
Re: How to Debug a Smartform
Debug of smartform and sapscript.
Debugging SmartForms
Debugging of a subroutine pool.
Reward all helpful answers
Regards
Pavan

Debuging smartforms

how to debug the program lines / code lines of the smart forms?

Hi,
goto your smartforms. click on test(F8)
function module will be generated. go inside the function module.
create a break point.
come out
then give the command for print from the application which is calling the smartforms.
Refer to these related threads
smartforms debug
Smartforms debug
How to debug Smartforms?
How to Debug the Smartforms
Re: Smartforms Debug
Smartforms
Regards,
Harish

Hi gurus how to debug the smartforms

hi gurus how to debug the smartforms

Hi
DEBUG Smartform:
1) One way to debug smartform is to debug the Function Module of that smartforms.
If you want to debug particular smartform node that the solution would be,
insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint.
So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
2) SFTRACE can be used for debugging SMARTFORMS.
Read More here.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
Re: How to Debug a Smartform
Debug of smartform and sapscript.
Debugging SmartForms
LOGO on Smartform
1) In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
4) Select any picture and set its Resolution in DPI
5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and position of the Logo
6) Set any other parameters if required, save and activate.
7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
8) Use TCode SE78 to upload new pictures and logos.
look at Thread Dynamic Graph in smartforms
Refer the links also -
Re: Dinamic Graph in smartforms
How to get file perperties in Unix server

Debug a smartform

Hi, Can anyone tell me the way to debug a smartform and to upload a logo into
SAP.

1) One way to debug smartform is to debug the Function Module of that smartforms.
If you want to debug particular smartform node that the solution would be,
insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint.
So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
2) SFTRACE can be used for debugging SMARTFORMS.
1)goto tcode SFTRACE --> click "trace on"
2) Get the function module name and set break points in function module name.
Read More here.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
or
Try with this:
In the form Utilities->debugger / RSTXDBUG FM for debugging
or
You can set break "sy-uname" within your smart form code sections and this will take you to the code sections in the function module of the smart form when the break point is reached. This way by timing the break points you can look at the code of the various nodes of your smart form.
BREAK-POINT can be used only in own program lines in smartform - not very helpful because it always stops until removed and generated again.
Or you can use transaction SMARTFORM_TRACE.
1. use transaction SMARTFORM_TRACE
2. in the SMARTFORMS, use utilities to show the function name. You can analyze this function in SE37 and set dynamic breakpoints as required. Lok at the SMARTFORM_TRACE to decide where to set break points.
or
SMARTFORMS DEBUGGING
For smartforms debugging you can do this.
1. Execute the smartform (execute button in SMARTFORMS transaction)
2. Take the generated function module and display it in SE80.
3.Find the smartforms Elements (text elements, windows, code lines, loops) in this and set Soft break points.
Correct name is SMARTFORM_TRACE. You have lots of options for adequate analysis
Tcode - SFTRACE
Re: How to Debug a Smartform
Debug of smartform and sapscript.
Debugging SmartForms
Debugging of a subroutine pool.
These are the steps to be followed for uploading graphics in R/3 system
1. First save the file as BMP 2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and make it Zoom as 100% and save as .TIFF 3. Open SE38 and execute program RSTXLDMC 4. Give your TIFF file path name 5. Select Bcol (for Color) 6. TEXT ID will be ZHEX-MACRO-. 7. Inplace of * write your own logo name (ZCOMPANYLOGO) 8. Execute the program 9. Now Goto SE71 create your ZFORM 10. Create logo window 11. Goto text element of logo window
The steps for including graphical elements in the layout set are as follows
The graphical element (like company logo) should be in valid graphic file format like .bmp or .jpg
Use appropriate software to convert the above file into a .TIFF file
Use report RSTXLDMC to upload this file as a text module in SAP
Execute the above program from the ABAP /4 editor
Enter the location of the .TIFF file on the PC
Specify BMON or BCOL as the raster image type
The SAP system suggests a name for the file ( like ZHEX-MARCO-* ). The * indicates the type of file. For e.g. if the file contains a logo then the name can be ZHEX-MACRO-LOGO
The ID should be ST and give the logon language
Running the program will convert this .TIFF file into a text element
Incorporate this converted logo in the appropriate window under the appropriate text element by giving
INCLUDE ZHEX-MACRO-LOGO OBJECT TEXT ID ST in the first line
regards,
srinivas
*reward points for useful answers*

Debugging of Smart Forms

Hi,
I developed a samrtrorm, i want to debug it . can any one plzz tell me how to debug smartforms.
Thanks & Regards
Munna
Message was edited by:
SYED MUNNA

Hi,
SMARTFORMS DEBUGGING
For smartforms debugging you can do this.
1. Execute the smartform (execute button in SMARTFORMS transaction)
2. Take the generated function module and display it in SE80.
3.Find the smartforms Elements (text elements, windows, code lines, loops) in this and set Soft break points.
Correct name is SMARTFORM_TRACE. You have lots of options for adequate analysis
Tcode - SFTRACE
Re: How to Debug a Smartform
Debug of smartform and sapscript.
Debugging SmartForms
Debugging of a subroutine pool.
Regards,
Priyanka.

Debugging of smart form

can any body give information regarding smartforms debugging?

Hi
we have two ways to debug smartforms.
you have to execute the smartform and you get a functional module .click display and then open sorce code of the FM. there you can set a break point. and execute
write the hard code 'break-point' inside the sorce code of smartform.

Smartforms Debugging

Similar Messages

Maybe you are looking for