SmartView 11.1.2.2-drill down with attribute dimensions

In Smartview 11.1.2.2.300, we have noticed that if we exclude attribute dimensions from our report, then we are able to drill down to Bottom level on all our reports; but if there are attribute dimensions listed, then it throws errors. Is it an option to drill down to bottom level, while keeping the attribute dimensions in the report? Thanks.
Edited by: 937685 on Jan 17, 2013 9:35 AM

According to Oracle that still relates to a timeout error: SmartView Error "XML Load Error: DTD is prohibited [ID 1059964.1]
Update the registry on the client machine with the following settings:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]
"ReceiveTimeout"=dword:00075300
"KeepAliveTimeout"=dword:000493e0
"ServerInfoTimeout"=dword:000493e0
You may need to reboot, I've seen it make a difference without the need.
Is this an FDM connection?
Anyway try that.
Steve

Similar Messages

Problem with drill down in time dimension - OBIEE 11G

Hello There,
I have a problem with drill down in time dimension. The hierarchy for time dimension is " Fiscal Year---> Fiscal Quarter---> Month(Name)--->Date". When I select a Time dimension and click results its getting opened in a Pivot table view. The problem here is, when I click the "Total" its getting drilled down to Year ---> Quarter but when I click on "+ sign next to quarter" it should drill down to month for that particular quarter for that particular year but its drilling down to month for that particular quarter for all years.
Any suggestions are much appreciated.
Thanks,
Harry.

1.) Congrats for resurrecting a year-old thread.
2.) Your answer is here: "Check the level key of the quarter level...it should include both quarter and year columns. Since a specific quarter occurs every year, quarter column alone can't be used as the level key."

Drill down to other dimensions

Hi,
I'm faced with some users that are used to being able to drill down to other dimensions in BEx reports from free characteristics. For example - Adding Cost Centers to Profit Centers in rows.
Is there an elegant way to handle this with BPC reports?
Br,
Sonni

Hi Sonni,
I guess you are looking for Drill Through. Please take a look at the below link from help.sap:
http://help.sap.com/saphelp_bpc75/helpdata/en/5f/3903c212e048228da389f8acf45832/content.htm
You can do a drill through to a table.
Hope this helps.

Drill through for Attribute dimensions

Hi,
How to enable drill thrus for Attribute dimension members. I have included the Attribute dimension in Drill thru intersections, but still I am not able to do drill thrus on Attribute dimension members. Is there any other settings I need to do in Metaoutline?
Thanks
Kannan.

Yep, this is a limitation. I suggest you create two reports one that takes your "optional" dimension out and a second one that has it in. if they don't need the dimension, select the first report and if they need the filter then the second. I m always a little leery with recursive hierarchies and Gen 2 or 3 sine they create a list of level 0 members under the selection in the query and there are limits to the number of members in an in clause and at high levels in the hierarchy it is easy to surpass it (In Oracle it is 1000 members)

Unable to drill down with binary logical operation issues

QSError: 10058] A general error has occurred. [nQSError: 59001] Binary logical operation is not permitted on Double operand(s) (S1000)
Basically this comes from my drill down report. I have 2 hierarchies on one report, 3 columns --- months, state, measures..
If I drill down from STate ----> lowest, then drill month--->lowest, things works fine; but if I start with month---> lowest, then drill state down, I will get this above error..
I checked the column data types from DB, month is char, week is date, state is char, measure is double
SO let me know what you think?
Thanks

is it helpful?
On Paass Navigation for another report

Drill Down With Tablix

Hello, group -
I'm trying to figure out how to apply a drill down report tied to a cell entry in a Tablix. Now, I don't mean something that expands to see detail, like with a '+' button, but something that brings up a new report using its own query, when the contents
of a cell is clicked and that uses the clicked term as the criteria in the associated query.
What I have is a Tablix that looks like this;
Basically, it just uses a SQL query to show how many members belong to a particular doctor (PCP).
When the report is run and the table populated, what I want to do is to allow the user to click on the contents of the PCP Name cell;
and have SSRS run a second report that brings up a detail listing of each member's demographics; name, address, phone number, last visit, etc.
Is this possible?
Thanx in advance!

Hi Adam,
If you want to add the "Go to Report" action, and have an same field on both the main report and the subreport, you can use this field as the relationship field and create parameter based on this field on the subreport.
For example,"@PCP_NPI" is the parameter you have created on the subreport and you have also create filter on the subreport based on this parameter, and the field "PCP_NPI" exists on both the main report and the subreport.
If you want to add "Go to Report" action(Snapshot1 you have provided) and specify the report (sPCPMbrListDetail). You will not need to create an subreport again like in the snapshot2.
Thank you for the post, Vicki.
For the moment, until I get this down, I'll stick to basics and just have the main report call a subreport and not display it as part of the main report's tablix. Once I get a good handle on it, I'll explore the other option.
I have created a parameter, @PCP_NPI, in the subreport and assigned it a default value for debugging. The subreport works fine on it's own using the default parameter value.
I have the Tablix on the main report set to call the subreport when a PCP name is clicked, passing @PCP_NPI to it, as shown below;
When I run the main report and click on a PCP I get an error that reads;
"The report parameter 'PCP_NPI' is read-only and cannot be modified."
If I remove the parameter from the subreport, I get an error that reads;
The Value expression for the query parameter '@PCP_NPI' refers to a non-existing report parameter 'PCP_NPI.'"
I see this error as an expected one, since the parameter is not defined in the subreport any longer.
The problem seems to be that I am unable to modify the parameter from the main report; something is locking it, but I don't know what.
I'm afraid I'm at a complete loss here. It seems that I'm following the instructions given, but something I'm doing is wrong.

Error when drill down with essbase hierarchy

Hi ,
I am displaying one bar chart with, one Ragged hierarchy dimension "Region" ( structure : total region - > India , US -> India south , US south -> chennai , California) and "revenue" (measure) .
Sometime's the drill down is happening smoothly (region - > sub region - > city) but sometimes its throwing below error :
Error Codes: OAMP2OPY:QIKSHNQU
DXE compiler error. Coordinate in target list must match to*coordinate in group by list. Source name:*
GroupbyAndCoorTableCompiler::run. XML: <sawxd:expr*xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"**xmlns:sawxd="com.siebel.analytics.web/expressiondxe/v1.1"**xmlns:sawq="com.siebel.analytics.web/querydxe/v1.1"**xsi:type="sawq:groupbyField" refCoorID="5"/>*
FYI , I have a product prompt attached with this graph . i.e , when user selects "total product" and drilling down its
working perfectly but when selects "network products" its throwing the mentioned error .
OBIEE version used : 11.1.1.6.2 (Build 120604.0813 BP1 64-bit)
essbase version used : 11.1.2.1
Thanks
sayak

I have created one report using Essbase cubes in OBIEE11G and when I am archiving the same report at one local server and unarchiving it at some other server then at the other server I am facing this error.
Any replies will indeed be helpful.

Show drill down with in same page in Oracle BAM 11g

Is it possible to show drill down report with in same report page?say once i open a report A, user can see only report A.Once i drill down to next level the report page will show report A and next drilled reoprt say report B and like this.

You mean to say you have two different reports like a master summary report and second as detailed report or you are just using bam hierarchichal drilling to drill down to the lower level detail?
BAM driving feature works on the two views in the same report like you have a list view at top of report and a pie chart view at the bottom, then you can pass parameters(like cliking on a row of list will pass parameter to the bottom view) from the top view to the bottom view and depending upon the parameter passed, the bottom view will get updated. In this case, you can see both the views simultaneously on the same page.

How do i create a report that has drill-down with class?

How do I create a report that has drill-down levels so that I can have summary information at the top level but then view specific records at a more detailed level?

can i know ur email address.
this is my other one coding
but problem is very very slow when i 1 see my output
TABLES: proj, coep.
*&            TYPES DECLARATION                                        *
*TYPES: BEGIN OF tb_coep,
         wtgbtr TYPE coep-wtgbtr,
      END OF tb_coep.
DATA : int_proj TYPE proj OCCURS 0 WITH HEADER LINE.
DATA : int_coep TYPE coep OCCURS 0 WITH HEADER LINE.
DATA : gd_date(10). " FIELD TO STORE OUTPUT DATE
TYPES : BEGIN OF t_date,
          year(4) TYPE n,
          month(2) TYPE n,
          day(2)   TYPE n,
       END OF t_date.
*&            SELECTION-SCREEN                                         *
SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-001.
SELECT-OPTIONS: so_pspnr FOR proj-pspnr OBLIGATORY.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN END OF BLOCK b01.
*&            TOP-OF-PAGE                                              *
*&            fetch the data for the list                              *
SELECT * INTO int_proj FROM proj where
         pspnr in so_pspnr.
append int_proj.
CLEAR int_proj.
ENDSELECT.
SELECT * into int_coep FROM coep WHERE
         wtgbtr in so_pspnr.
append int_coep.
CLEAR int_coep.
ENDSELECT.
LOOP at int_proj.
write : / int_proj-pspnr, int_proj-post1.
ENDLOOP.
LOOP at int_coep.
write : int_coep-wtgbtr.
ENDLOOP.
Edited by: Dickson on Jul 10, 2009 10:53 AM

Xcelsius Drill Down With Column and Line Chart

Hi Guys,
I am working on an Xcelsius 2008 Dashboard. I would like to integrate two charts, a column and a line chart. The column chart is supposed to show the results for each quarter. With a selector it changes the view and name of the different numbers.
Then I would like to enable the drill down so that I can see the results for the three months of the corresponding quarter in the line chart. Is that somehow possible? I am totally lost. Thanks for your help.
Kind Regards,
Maurice

Hi Maurice,
You cannot integrate a column chart and line chart to make drill down possible. You could drill down a column chart to show the values in another chart bt that would be just two different charts and not an integrated one.
Regrads,
Anju Saseendran

Drill Down with 2 tables

OBIEE 11g
Suppose I have 2 tables with both fact and dimensions contained.
Table A has following columns:
Category
Count1
Count2
Count3
Table B has following columns:
Category
Sub-Category
Product
SKU
Count1
Count2
Count3
I would like to create a report that uses both these tables as I will need to drill down as follows:
Category-->Sub-Category-->Product-->SKU and get the corresponding counts.
Is it better to have all these columns in only one table or can I use both the above tables and if so how.

Check these
http://docs.oracle.com/cd/E14571_01/bi.1111/e10540/dimensions.htm#i1017813
http://docs.oracle.com/cd/E05554_01/books/admintool/admintool_WorkInBM9.html#wp179033
Edited by: Srini VEERAVALLI on May 10, 2013 3:15 PM
Any updates on this?
Edited by: Srini VEERAVALLI on May 22, 2013 10:07 AM

Issues with multilevel pie chart drill down with push button

I am new to Xcelsius. I am trying to build a multilevel pie chart drill down (one pie chart drilling down to another etc) and I am able to achieve that. Now I want to add a Back Button using Push Button so that I can go up. When I preview, the Push Button goes into two state and I have to double click to go back. Can anyone tell me what I am doing wrong. I am using the latest Xcelsius. [The source code is here|http://www.woofiles.com/dl-195360-3lTyVM8Z-piechartdrilldownwithpushbutton.xlf]
Thankyou.

Hi Murali
This is exactly the same what i tried to do,
Drill down to 4 levels State -> City-> store etc with 4 pie charts and similar push button to close each level to
go back to previous chart, first run from 1 to 4 works fine, then after closing all the levels and when i am at the pie chart 1
if i click any pie slice it will jump to Pie chart 4 straight,
I tried tracking the issue, all i could find is some how the previous dynamic visibility values are back even after erasing
the data with the PUSH button (Destination cell insertion with blank or 0).
did you find a solution for this issue ?
Thanks
Chandra

Drill down with in a drill down

CREATE TABLE [Store](
[StoreId] [int] IDENTITY(1,1) NOT NULL,
[LOC_Name] [varchar](50) NULL,
CONSTRAINT [PK_Store] PRIMARY KEY CLUSTERED
[StoreId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Insert into [dbo].[Store]
[LOC_Name]
select 'Virginia'
union all
select 'Chicago'
union all
select 'Dallas'
CREATE TABLE [Employee](
[StoreId] [int] NOT NULL,
[Emp_NAME] [nvarchar](70) NULL,
) ON [PRIMARY]
Insert into [dbo].[Employee]
[StoreId]
,[Emp_NAME]
select 1,'daniel'
union all
select 1,'jack'
union all
select 1,'roger'
union all
select 1,'matt'
union all
select 2,'sam'
union all
select 2,'henry'
union all
select 3,'eston'
union all
select 3,'robert'
union all
select 3,'nadal'
CREATE TABLE [Customer](
[CustomerId] [int] IDENTITY(1,1) NOT NULL,
[StoreId] [int] NOT NULL,
[CUST_NO] [nvarchar](11) NULL,
[Emp_NAME] [nvarchar](70) NULL,
CONSTRAINT [PK_Customer] PRIMARY KEY CLUSTERED
[CustomerId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
set identity_insert [CCC_STAGE].[dbo].[Customer] on
Insert into [CCC_STAGE].[dbo].[Customer]
[CustomerId]
,[StoreId]
,[CUST_NO]
,[Emp_NAME]
select 201,1,897456,'daniel'
union all
select 202,1,974652,'daniel'
union all
select 203,1,276294,'matt'
union all
select 204,1,612348,'jack'
union all
select 205,2,187906,'henry'
union all
select 206,2,289123,'henry'
union all
select 207,2,427403,'sam'
union all
select 208,3,591654,'robert'
union all
select 209,3,904563,'robert'
-------------- Query to retrieve In each location each employee is working on how many customers--
select [LOC_NAME],
B.[Emp_NAME],
COUNT(distinct C.[CUST_NO]) TOTAL_CUSTOMERS
FROM [CCC_STAGE].[dbo].[Store_TEST] A
join [CCC_STAGE].[dbo].[Employee_TEST] B
on A.StoreId=B.StoreId
join [CCC_STAGE].[dbo].[Customer_TEST] c
on B.StoreId=C.StoreId
and B.[Emp_NAME]=C.[Emp_NAME]
group by [LOC_NAME]
,B.[Emp_NAME]
ORDER BY [LOC_NAME],B.[Emp_NAME]
Hi everyone,
Can any one help me in this
Drill down report
can any one help me in this
If we click on drill down of Chicago, we should be able to see all the employees of Chicago in the same column, like that if we click on drill down on each loc_name, we should be able to see employees related to that location under the loc_name column,
not in the different column. when i try am getting in different column.
How to do this in SSRS? i did this using grouping and visibility feature hidden by toggle, but am able to see employee names, but on top of them am not able to get employee as heading.
Below I am sending the code (creating the tables/inserting the data/ and retrieving the data). please try to run the query with the data I sent. you will see the same data as it is in the below image.

Hi ,
You can try below Simple Steps ;
(generate using Wizard)
1. On Solution Explorer -> Right-click on Reports -> Select Add New Report
2.Click on the Next Button -> Give a Data Source name and Click on the Edit Button
3.Select Server Name -> Select "Use SQL Server Authentication" Radio Button
4.Give User name and Password -> Select Database Name and Click on the "OK" button.
5.Press the Next Button -> type your Sql Query -> NExt
6.Select Tabular Option and Click on the Next Button
7.Select [LOC_NAME],[Emp_NAME] for the Group list and the TotalEmployee is for Details -> Next
8.Select Stepped option -> Enbale Drilldown -> NEXT-> Finish(you can use this option if only you require Drilldown option in your report else you an ignore this or simply click next.)
9. Delete EmployeeName Column -> Paste Emplyee Name Next to LocName As shown in Image.
10 . Delete table1_Details_Group in Grouping Pane
11. Type =Sum(Fields!TOTAL_CUSTOMERS.Value) for Total Customer
12. Right Click on Emp_Name Row -> Insert Row -> Outside Group Above -> TYpe Employee
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem.

Drill down with TopN or Rank

hi, experts,
if there is a dimension with 2 levels, area , city
and one fact "surface area"
I would like to build a pie chart of 2 elements, area, surface area.
when user click on an area on the pie chart, it drills down to city.
However, if there are so many areas.
the pie chart is difficult to read.
show I would like to only show top 10 with biggest surface area, group other areas to "Others" (total 11 portions)
How to do this ?

For this add a prompt in the dashboard like TOP-N
Go to SQL Results in the prompt and add the sql---
SELECT case when 1=0 then "column name" else 10 end from "subject area name" union SELECT case when 1=0 then "column name" else 'Others' end FROM "subject area"
In the set variable section select the presentation variable and give a name like TOP_N
Add another column to the report and in the formula
TOPN(Sum("surface area" by "area"),@{Top_N}{10})
Note:I had simply given the column names as it is as i don't know the name of your tables and subject areas.
Thanks,
chinna.
Edited by: chinna on Aug 13, 2010 2:02 AM

Drill down with all other records

Hi, All
how can I see all other records after drilling down but not only record wich i drilled into?
i mean drilling like it works in Discoverer or in other words i'd like some records to be expanded and all other collapsed. Does anybody know whether it is possible?
Thanks in advance
Message was edited by:
altimer

NO, it's not, but anything requiring a major UI overhaul would require some parsing-wrapping with some server-side scripting (like you could wrap it around a php-script - but again - this is a long shot plus you'd have problems with support in case something goes awry). I've seen at someone's blog that such functionality might be released later. For now, the best thing to do would be designing your Dashboards around it. Also, have you looked at Siebel CRM? Because last time I checked - there was something like that there - and you can integrate BI to CRM (at least you could a few years ago).

SmartView 11.1.2.2-drill down with attribute dimensions

Similar Messages

Maybe you are looking for