/SMB40/RVADOR01 in runtime giving unicode error

hi all
i am using /SMB40/RVADOR01 program for printing the smartform but in runtime it is giving not unicode compatible
when i performed syntax check in /SMB40/RVADOR01 program there it also giving unicode error
and in the program attributes unicode check is not selected
so i want to know can we change the standard /SMB40/RVADOR01 program to unicode compatible
if yes than how to do for a standard program
or i will copy this program and make a custom program which is unicode compatible
thanks in advance

hi,
I think you might have done UCCHECK transaction on this or other program by now. If you have not, please see if it helps.
UCCHECK is for making programs Unicode comaptible.
Pls post your findings.
Regards,
Vivek.

Similar Messages

Unicode error in statement Describe Field

Hi,
There is a statement in my program which is giving Unicode error.
DESCRIBE FIELD t_mara-mfrpn LENGTH len.
Here t_mara is internal table with header line. Unicode error which I am getting is 'In Unicode, Describe Length can only be used in Byte mode or IN....'.
Kindly let me know how to remove this unicode error without affecting the functionality.
Regards,
Rajneesh

syntax check always finds the error when the addition BYTE or CHARACTER MODE is missing in the statement DESCRIBE.
And it will not cause any impact in functionality of your program

UNICODE Error in ECC 6.0

Hi Guys,
I am working on upgrade project 4.5B to ECC 6.0, in 4.5B internal table refers the Ztable, but in ECC 6.0 it giving error.
4.5B statement: GT_PLAN_SIO TYPE STANDARD TABLE OF   ZSTR_PLAN_SIO WITH HEADER LINE.
The above statement error in the ECC 6.0, Could you please correct the statement.
Thanks
Gourisankar.

Hello Gourisankar
First of all I would get rid of the "... WITH HEADER LINE". However, this is probably not the reason for the Unicode-error.
Since you did not mention the most important detail to answer your question, namely the exact Unicode error, I can only give some tips and hits:
- try to change the type of the table
- try to add key options
Examples:
DATA: GT_PLAN_SIO TYPE STANDARD TABLE OF ZSTR_PLAN_SIO. " WITH HEADER LINE.
DATA: GT_PLAN_SIO TYPE                    TABLE OF ZSTR_PLAN_SIO.
DATA: GT_PLAN_SIO TYPE                    TABLE OF ZSTR_PLAN_SIO
                                                              WITH DEFAULT KEY.
Regards
Uwe

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

Unicode error:a line of internal table and a data object are not mutually c

Hi Friends,
    This is the issue in upgradation from 4.6c to ECC6.0
    I have an internal table itab which has include structure say 'xyz' . In xyz there is a field of type int4 as third field. I have a field as l_line which is a string.
data : begin of itab occurs 0.
         include structure zxyz.
data: end of itab.
data: l_line type string.
In the program I am getting the unicode error as:
" A line of "itab" and "l_line" are not mutually convertible in unicode program." at he following line.
loop at itab into l_line.
endloop.
Thanks,
Ali.

Hi Narendran,
I did the same earlier, but the field l_line is again used in the another line as follows
IF l_line CS w_group.----
(1)
where     w_group         LIKE zstr-cctr_group.
here zstr-cctr_group is same as one of the fields of structure xyz.
in line 1 it is giving warning as
l_line is incompatible and it must be C,N,D,T or string.
Thanks,
Ali

FAGL_FC_VAL is giving DUMP ERROR

Hello Friends,
When i execute FCV for G/L Balances, system is giving dump error which i mentioned below.
Runtime Errors         RAISE_EXCEPTION
Date and Time          16.01.2010 18:31:11
Short text
     Exception condition "CURRENCY_EMPTY" raised.
What happened?
     The current ABAP/4 program encountered an unexpected
     situation.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A RAISE statement in the program "SAPLGICV" raised the exception
     condition "CURRENCY_EMPTY".
     Since the exception was not intercepted by a superior
     program, processing was terminated.
     Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLGICV" or "LGICVU02"
"G_CURRENCY_FROM_CT_GET"
or
"SAPLGICV" "CURRENCY_EMPTY"
or
"FAGL_FC_VALUATION " "CURRENCY_EMPTY"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
(Unconverted)".
As per this dump i've searched SAP Notes in OSS. Unfortunately i couldn't find anything.
But i'm not getting this error when execute FCV for Open Items.
What could be the solution?
Please guide me.
Rgds
Swapna

Hi Anuj,
Thanks for your response.
Actually no need to maintain currency in the main screen.
This is the problem with non-maintenance of currency for a company code. It will be fixed once we maintain the currency for that Company code.
Bye
Swapna

I am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize

i am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize. I am not able to capture the content in DV mode. i am using a Firewire 800 to 400 converter and a 6 pin firewire cable to connect to the SonyHDV VTR. Please suggest me how do i do this.

The 800-400 converter plugs have proved a problem for this. What version of the software are you using. It sounds like an older version of FCP, if so you should ask your question on the Final Cut Studio forum.

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
This will tell you how to restore
http://support.apple.com/kb/HT1414
You will probably need to use recovery mode
http://support.apple.com/kb/ht4097

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

How can I see /SMB40/RVADOR01 in my system

Hi All,
I ahve one more issue or problem mentiond below :
/SMB40/RVADOR01 is the SAP-standard (SAP-SMART FORM) driver program for Sales Contract.
/SMB40/SDCON_A is the SAP-standard SAP-SMART FORM form for Sales Contract.
I dont have /SMB40/RVADOR01 in my system but i have /SMB40/SDCON_A in my system.
i m working on SAP 7.10 version.
How can I see /SMB40/RVADOR01 in my system.
give me SAP note no.
Thanks
Regards
SANJAY CHOBDAR

>
SANAJY CHOBDAR wrote:
> How can I see /SMB40/RVADOR01 in my system.
> give me SAP note no.
If it's not there, then you can't see it.
If you need a note number: go look it up yourself.

How to assign a character field to a strucure in ECC6.0 ( Unicode error)

Hi all,
This is regarding a Unicode error we are facing in upgrading a program from 4.6c to ECC6.0.
The following pice of code gives error now in ECC6.0, stating Unicode incompatible structures.
 DATA: WA_MSEG TYPE MSEG,
 WA_MKPF TYPE MKPF.
 DATA: LE_DATA(8192) TYPE C.
 CALL FUNCTION 'ARCHIVE_GET_NEXT_RECORD'
 EXPORTING
 ARCHIVE_HANDLE = LE_HANDLE
 GET_REAL_STRUCTURE_NAME = 'X'
 AUTOMATIC_CONVERSION = 'X'
 IMPORTING
 RECORD = LE_DATA
 RECORD_CURSOR =
 RECORD_FLAGS =
 RECORD_STRUCTURE = LE_STRUCTURE
 RECORD_LENGTH =
 EXCEPTIONS
 END_OF_OBJECT = 1
 INTERNAL_ERROR = 2
 WRONG_ACCESS_TO_ARCHIVE = 3
 OTHERS = 4
 IF SY-SUBRC <> 0.
 EXIT.
 ENDIF.
move records
 CASE LE_STRUCTURE.
 WHEN 'MSEG'.
 WA_MSEG = LE_DATA.
 move-corresponding WA_MSEG to TBL_ARC_MSEG.
 APPEND TBL_ARC_MSEG.
 CLEAR: WA_MSEG, LE_DATA, TBL_ARC_MSEG.
 WHEN 'MKPF'.
 WA_MKPF = LE_DATA.
 move-corresponding WA_MKPF to TBL_ARC_MKPF.
 APPEND TBL_ARC_MKPF.
 CLEAR: WA_MKPF, LE_DATA, TBL_ARC_MKPF.
 ENDCASE.
Can you please suggest a way to overcome this error.
Thanks in advance,
Sreenivasa Reddy V.

IV_OFFSET is the position from the C field will be started to be read (should be 0) and EV_OFFSET is the length to which the data is going to be fetched. The Following code could be useful ---
w_len = STRLEN( p_data ).
CALL FUNCTION 'OIF_CONVERT_CHAR_TO_STRUCTURE'
EXPORTING
 iv_string = p_data
 iv_structure_name = 'VBAK'
* iv_offset = w_len
IMPORTING
 ev_structure = wa_vbak
 ev_offset = w_len
EXCEPTIONS
 ddif_nametab_get = 1
 OTHERS = 2.
Hope That Helps
Anirban M.

TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help

Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth?!

Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth is going on!??!
ok so the download problem with my iphone.. what could be the cause of that? ive restarted and deleted the "undownloaded app" over 10 times already. and restarted the iphone 10 times... next thing i know i cant install itunes on my laptop.... geez man..
obviously there is a fix which someone will help... but why should i have to go through all that crap to install a so called uncomplicated software... when you think about it this really shouldnt even be an issue.
normally if the thing dosent work. normally with most programs you just uninstall the uncompleted software and just reinstall and everything is usually good to go.. help!

ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me

I installed itunes 10.5 in my PC to sync with my ipod touch 4G but it's giving me error that itunes could not connect to itnues store.Make sure network connection is active and try again...I'm connected to internet though, please help!

I installed itunes 10.5 in my PC to sync with my ipod touch $G but it's giving me error message that itunes could not connect to itunes store..."make sure network is active and try again." I'm connected to internet though so I don't understand please help!

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

/SMB40/RVADOR01 in runtime giving unicode error

Similar Messages

Maybe you are looking for