SMS Messaging: Blank line at the end of the message

I never had this problem with the 3G, but on my iPhone 4, I often see a blank line at the end of my text message after I send it.
Also, a similar issue I am having is that while I am drafting text messages, the words fits nicely in the text input box, but once I hit send, some words are shifted to the next line.
*Typed in input box:*
Sorry. We'll be there asap.
*Show in the green bubble:*
Sorry. We'll be there
asap.
Anyone know how I can solve this problem? Thank you!

this isnt the way to respond to someones problem... thats not what this forum is for ..
now to the op have you tried resetting your phone by holding both the home button and the sleep/wake switch for 15 seconds...
if that doesnt work I would try restoring your phone from backup to see if you can clear this issue up

Similar Messages

How to remove the blank lines at the end of the JTextArea .

Hi,
I need to remove the blank lines in the JTextArea at the end. Suppose i am giving 'A' in the first line and press the enter key two times, after i am giving the 'B' in the third line and press enter key for two times. I need to remove, the last two lines of JTextAreae, . How i can remove these lines?

String#trim() removes all whitespace from both ends of the String.
The requirement was to remove line breaks from the end of the String only.
String#replaceAll with a suitable regex would do the trick. Untested regex for this:text.replaceAll("[\\n\\r]+$", "")db

TB 31.4 when compsing a message, has introduced a spurious blank line between the address boxes and subject box.

When writing a new message I used to see two lines of address boxes followed by the subject line. So, when sending an email to a single recipient, that persons address would remain on screen as I composed the email.
As of version 31.4 the initial "Write" window shows a single address line, the subject line, and a blank line between them. The consequence is that, upon entering the recipient's address, it immediately scrolls up and can no longer be seen. This happens regardless of how I enter the address i.e. start to type, select from address book and hit ENTER or TAB, or indeed if I choose an address from the address book sidebar. (See "capture1.png")
If I increase the space available for the header data in the "Write" window I still get a blank line between the address lines and the subject line (see "capture2.png"). Furthermore, the next time I go to compose an email I am back with the original version of the "Write" window, as shown in "capture1.png".

You might want to drop the author an email and let him know. It is not a major thing, but something that would probably require only a minor fix.
I have found him helpful, but slow to reply. He is always on holidays when I email him.

How to insert blank lines in the ALV output.

Hi Friends,
Could any body help me out How to insert blank lines in the ALV output.?? Any Code pls...
Thank you,
Vikram.C

hi vikram
do like this
In the fieldcatalog table all the fields should be in editable mode
ie lw_fcat-edit = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
is_layout = lv_layout
it_fieldcat = lt_fcat[]
i_save = 'A'
is_variant = lv_variant
TABLES
t_outtab = lt_license[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_data
*& Form user_command
FORM user_command USING r_ucomm TYPE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN 'ADD'. "
data: lv_ind type i.
data: lv_line type i.
describe table lt_license lines lv_line.
loop at lt_license into lw_license.
lv_ind = sy-tabix.
if lv_ind = lv_line.
append initial line to lt_license.
endif.
endloop.
ENDCASE.
ENDFORM. "user_command
reward points if useful
Rohan

GUI_DOWNLOAD blank lines in the middle

Hi All,
I am using 'GUI_DOWNLOAD' FM to create excel file of my internal table data; Internal table is having 220 fields and expects to create 220 columns in excel file;
In the middle of the excel file I get several blank lines on and off with only very few column values are filled;
I checked the ITAB in debug before calling the FM it has no issues and has the correct data;
My code is as below;
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = l_filename
      filetype                = 'ASC'
      write_field_separator   = 'X'
    TABLES
      data_tab                = i_compare
      fieldnames              = i_excel_head
    EXCEPTIONS
      file_write_error        = 1
Appreciate your expert ideas please;
Thank you
Iver

Hi,
GUI_DOWNLOAD blank lines in the middle
In your GUI_DOWNLOAD code, There is no mistake.
I think, In your program, have you written any SET BLANK LINES ON.
It is one case.
Follow this link,
http://wiki.sdn.sap.com/wiki/display/ABAP/DownloadinginternaltablestoExcel
It may helps to you.
Regards,
Sekhar

How can I remove the preceding blank lines in the downloaded text file?

I have created a jsp that writes to a file and then prompts a dialog box to have an option to view or save the file. However when i view the file, there are blank lines before the actual content of the file. How can i remove these lines?
Below is part of my code:
response.setContentType("application/x-download");
response.setHeader("Content-Disposition","attachment; filename=\""+ fileName + "\"");

Hi,
Those blank lines are normally because of the scriptlet code at the start of your jsp page.
Remove any new lines between page directives or any include directives that you have at the top of your page.
Look at the generated servlet code to see what exactly is causing the newline to be inserted (look for out.println("\n");)

Blank line in the spool file

Good day,
I was trying to retrive data from the table and save the results in the spool file, but I find blank lines in the spool file. What can be the couses of that? I am using oracle 9i.
regards
Talifhani

SET SHOWMODE off
SET FEEDBACK OFF
SET VERIFY off
SET RECSEP off
SET TRIMSPOOL on
SET LINESIZE 20000
SET HEADING OFF
SET PAGESIZE 0
SET PAGES 0
==>Select the spool file
==>Run you query
==>Spool off.
Now check the spool file.
Good luck!!!
Bhagat

Insert a blank line at the start of a text file

I'd like to insert a blank line at the start of a text file.
I presume SED would be the best to use? Any help on code would be greatly appreciated?

Hi David,
   That is a little more difficult in sed and awk than it seems like it should be. I'll assume that you know how to handle the redirection and I'll just post the actual sed and awk commands. If you're comfortable with multiline statements in sed it could be done with the following:
sed '1s/./\
Programmatically more complicated but easier to type would be:
sed '1{x;p;g;}'
   I think that it's conceptually simpler in awk using the BEGIN address like so:
awk 'BEGIN{ print }//'
   You'll probably get other responses using other tools. I'm certainly curious to see what develops.
Gary
~~~~
   "And I don't like doing silly things (except on purpose)."
      -- Larry Wall in <[email protected]>

Blank lines at the end of SMS - iOS 4

I've recently upgraded to the iPhone 4 from a 3G and messaging is so much faster, but for some reason occasionally when I send or receive an SMS there is a blank space at the bottom of the message, as if there's a carriage return there. This happens for both messages I send and receive, about every fifth message or so, and seems to be random.
Anyone else noticed this? I've not had this issue before iOS 4 and although it isn't causing any problems with actually sending and receiving messages, it's quite annoying!

String#trim() removes all whitespace from both ends of the String.
The requirement was to remove line breaks from the end of the String only.
String#replaceAll with a suitable regex would do the trick. Untested regex for this:text.replaceAll("[\\n\\r]+$", "")db

How to remove blank lines in the end of list .

hi,
in a complex report ,when there are only 20 pages,and linecount is 65(2) ,in the last page only 27 lines are filled and data is completed.then blank lines are printing from 27th line to 63 line.then end of page is triggering.
so plz help me how to remove the blank lines here and immediately print the endof page.

Hi,
will this work for you.
SET BLANK LINES OFF.
These statements allow you to specify whether you want to output blank lines or not. Use SET BLANK LINES ON to output blank lines or SET BLANK LINES OFF to suppress them.
Regards
Viswanath Babu

Unable to remove the "blank" line at the end of the file

Hi Experts,
My requirement is to send data in 'Binary' form as an attachement to a mail address. I have followed as below.
Converted data into Binary form using the FM 'SCMS_TEXT_TO_BINARY'
Call FM SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail.
Until this point, all works fine and I receive a text file as well. Howvever, a blank line gets appended at the end (after last line) of the file. Please let me know, how I would get rid-off this empty line. Please refer attachment.
Thanks in advance !

Thanks Manish.
I have resoved the issue, following steps have been incorporated.
1. Find the output length of the file from the exporting parameter(output_length) of the Function module 'SCMS_TEXT_TO_BINARY'
2. Pass the output length to DOC_SIZE component to the second line of the itab packing_list of function module 'SO_NEW_DOCUMENT_ATT_SEND_API1'.
3. Pass the output length to DOC_SIZE component to document_data of function module 'SO_NEW_DOCUMENT_ATT_SEND_API1'.
So there it is, the blank line is gone....
Regards,
Umar Ali

Small square boxes appearing on blank lines (UPDATED) - The question is, how to get rid of them?

******* As to my display name "All I tried were in use" - when I registered at the Adobe site to use the Browser Lab, I tried something like 10 or 12 user names and finally gave up and went with "All I tried were in use" - my name is Bob
------------------------------- UPDATE --------------------
The problem, small square boxes showing on lines in Freetext Tool comments, is not limited to blank lines, as I originally reported here. These boxes are showing up at the end of every line. It does not matter if the line break is hard or soft, whether the line is empty or not.
Please read the original post bearing mind that the problem is occurring at the end of all lines.
Also - here is a screen capture of a part of one comment box, showing the square lines. I didn't show the entire box because the material above the area I'm showing is a tad private or confidential. Here is the image showing the boxes - note that there is no box at the end of the last line in the comment.
-------- Original Post ------------
We have a copy of Acrobat 5.0. and up until now it has done what we need, which is not much more than adding bookmarks, links, and some touch up. I know it is very old and I know things change. I'm hoping this has nothing to do with the release we are using. I would think this would be a backward compatibility issue if it is a problem with newer Reader versions dealing with PDFs "edited" with 5.0.
I am having small square boxes showing up on blank lines. (read my update above - the boxes are at the end of all lines, soft break or hard break))
I'm a programmer (37+ years in most all aspects of Data Processing) and I decided to learn the PHP programming "language" to add some server side processing to some of my web sites. So, I found a fairly good manual on PHP in PDF form and have been using it.
I quickly found that the PDF didn't have a single link in it and no bookmarks, so I've been adding them as I look up a particular subject. I'm also adding comments and notes to document things not in the original manual or to add comments that would help other programmers` (who know other languages) to adjust to PHPs' way of thinking - for example: in all the other languages I know (perhaps two dozen) to get rid of a file, you "delete" it. In PHP you "unlink" it.
I've added a lot of comments and notes like that and when I view the PDF in Reader (on this computer I have 9.4.2) I'm seeing small square boxes on empty lines. The lines were created when I pressed Enter twice to insert a blank line between paragraphs. (again, read the update at the top of this message - the boxes are at the end of all lines, soft break or hard break)
How can I get rid of them?
They are not present when I've got the PDF open with Acrobat, only when I'm using an Acrobat Reader.
They are also not present if I look at the comments using the Comments navigation panel - that is, they still show on the page, but they don't show in the copy of the comment displayed in the navigation panel.
They are not present in Notes or when I use one of the shape tools (Square Tool, Circle Tool, or Line Tool) to create notes. They are only present in Freetext Tool comments
They are clearly being show where there are successive line feed/carriage return characters - but how do I get rid of them?
I JUST THOUGHT OF SOMETHING - I realized that I'd not printed any of the pages on which I have placed comments and wondered if the boxes show when printing the PDF with Reader -- they do. They are not present if I use Acrobat, not a Reader, to print the same page.
Any assistance you can provide will be greatly appreciated.
Please don't tell me to get a newer version - an expenditure like that is simply and totally out of the picture. For us, this is a Depression, not a Recession - we are self-employed and our businesses have been severely hammered since 2006 - we are down to about 1/4 of our income before the big guys trashed the economy.
Bob
P.S. Do you know that you can have a heart attack without chest pain, shortness of breath, or left arm pain? Well, you can! I've had two and the first one nearly killed me because I had no clue it was a heart attack. You can read about it first one here. Pass this on, it could save a life.
My second heart attack occurred on October 4, 20112 - it began, around 3:15 AM, as the first one did, with a headache. It turned out the stent implanted in 2002 had been completely clogged by too much tissue grown. The doctor put another stent inside the first one.

Problem Resolved - it is a font issue. Apparently Acrobat can't handle particular fonts and it is best to stick with a very small slection of fonts - Arial, Helvetica, Times Roman.
I haven't test a lot of fonts. If I do, I'll post there results here.
Bob

Blank line in the smartforms

Hi all,
I am getting a blank line in a table display in smartforms. In print preview it looks good, but when it is printed it displays a blank line.But there is no data loss.
I am using a dotmatrix printer.
Thanks in advance,
sethu

hi wher u r getting the blank lin..
at the starting or ending?
how u r ptrinin it using TABLE node ot LOOP node?
1.once check whether the ITAB contains any extra blenk line
2.if u r using the LOOP node then may be u r looping extra iterations
check once

How to add blank line below the table/row whenever there is no data

Hello Everyone,
I have a table in my report template like below:-
Children / Dependents: Name / Comments: Grandchildren: Name / Comments:
Son John Daughter Smith
Daughter Laura Son Kevin
Son Bill None NA
When i run the report I need to achieve the following conditions:-
Condition 1: Loop through all rows and whenever there is data in any row in the table...I need to Populate and print it.
Condition 2: When Loop is ended, when you see there is no data in any row in the table... add a dash line at the end of the table.
Condition 3: Total no of populated rows + blank dash line <= Max no of rows in DB. And when max no of populated rows in report = max no of rows in DB/UI ... don’t print dash line.
I want to achieve these conditions. Can you please help me.
Thanks..Rithesh

Hello Everyone,
I have a table in my report template like below:-
Children / Dependents: Name / Comments: Grandchildren: Name / Comments:
Son John Daughter Smith
Daughter Laura Son Kevin
Son Bill None NA
When i run the report I need to achieve the following conditions:-
Condition 1: Loop through all rows and whenever there is data in any row in the table...I need to Populate and print it.
Condition 2: When Loop is ended, when you see there is no data in any row in the table... add a dash line at the end of the table.
Condition 3: Total no of populated rows + blank dash line <= Max no of rows in DB. And when max no of populated rows in report = max no of rows in DB/UI ... don’t print dash line.
I want to achieve these conditions. Can you please help me.
Thanks..Rithesh

PI731: FTP-FCC-Receiver with blank line at the beginning

Hi,
In my example I always get first a blank line but I do not want this blank line.
I need the field FILENAME only as a variable name for the file name schema.
Mapping:
Communication Channel (Receiver / FTP / File Content Conversion)
Result (with blank line)
How can I solve my problem? Do I need to adjust the content conversion.
Thanks
Rene

Hi René,
Here is your solution..Variable substitution in case of non-XML target files in a multi-mapping scenario
You just need to follow the adapter configuration.
Cheers,
Ambrish

SMS Messaging: Blank line at the end of the message

Similar Messages

Maybe you are looking for