SMTP for GMAIL

We recently switched from our old mail server to GMAIL, and all of my scheduled Crystal Reports died.  Can anyone, PLEASE, tell me what I need to put in the Email (SMTP) Destination fields to make it work again?  I have been getting an SMTP_E_TCPSOCKET_OPEN(2) error.  We are using Crystal version XI.  Any help would be greatly appreciated.  I am new to the Crystal implementaion, so be direct with your responses..."put '25' in the PORT field"  That kind of thing. Mark

Hi,
Have a look at the following documents regarding using the SMTP server of gmail.
http://lifehacker.com/software/email-apps/how-to-use-gmail-as-your-smtp-server-111166.php
Dagfinn

Similar Messages

  • 2 step verification settings for outgoing MAIL SMTP for GMail

    and i am in the outgoing SMTP > ADVANCED section of mail where i have an iCloud, GMail and domain based email SMTP addresses.
    does anyone know if i set up a SMTP server for Mac Mail as having an authentication set to "none" or set to "password" for GMAIL and whether this password should be one of these online generated 2 step verification passwords?
    i seem to have this account on sparrow with no problems at all but i am noticing that GMail mail is not showing up on either of my mac mail installations on either of my machines

    Hi Hotwheels
    had similar issues. But incoming worked fine immediately, only outgoing was an issue.
    (Though on iPad + iPhone both in- and out-going mails worked fine.)
    I generated a password via Google only ONCE for may Mail app. And I entered it only ONCE in the settings. No other changes done.
    So on the Mail application, I saw e-mails coming in. My outgoing e-mail stayed in my "outbox".
    I just switched to another outgoing server. In my case, when I opened the advanced settings, a popup screen showed up with a number (approx 10) outgoing servers, all named exactly the same: "Gmail" ;-)
    The one that was selected had the message "off-line" behind it and so were a couple of others.
    As soon as I picked one that was apparently on-line, the mails in my outbox were send within seconds ...
    So problem solved without actually really changing settings or entering paswords.
    Hope this helps

  • How can i get the SMTP IP address for gmail

    Hello,
    sapian,
              I want to schedule a webi document through BI Launch Pad to users email address gmail.So while configuring the AdaptiveJobServer in CMC i need to give SMTP details such as
    Domain name:
    Host:
    Port:
    So for scheduling a webi document to a gmail user i need the above details for gmail SMTP server.Can any one suggest me how can i get the above details for gmail SMTP server.
    Thanks in advance.
    Regards,
    Kishor Kumar S

    Hi Hrishikesh,
    i have configured the 'stunnel.conf' file with the following details
    accept  =static ip address of the machine colon port number where the stunnel is installed
    connect = smtp.gmail.com:465
    and i saved the file.
    when i go to
    Start->Stunnel->service install
    it is giving error as follows
    Error binding ssmtp to (ip address and port number which i have given in stunnel.conf file 'accept')
    bind: No error (0)
    Can you suggest me the solution for the above error.
    Thanks in advance,
    Regards,
    Kishor

  • Why all of a sudden am I having difficulty sending Gmail emails? I get a send error. When I run diagnostics there is a SMTP and IMAP account for Gmail and I am not sure how to fix this.

    Why all of a sudden am I having difficulty sending Gmail emails? I get a send error. When I run diagnostics there is a SMTP and IMAP account for Gmail and I am not sure how to fix this.

    Hi jodilynnf,
    When using Connection Doctor to see what is could be causing the issue, look for the red dots to let you know what is wrong. Then all you have to do is correct that information. You can double click on the section that is giving you issue and it will take you there. Most issues could be just password being entered incorrectly. Take a look at the article below to walk you through troubleshooting issues with Mail.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/en-us/TS3276
     Take it easy,
    -Norm G.

  • Issues with Mail and SMTP and Gmail Accounts

    So this isn't a question....more like a solution that I had to figure out. 
    We have multiple gmail accounts in our family and after upgrading to OSC Yosemite our gmail accounts wen't haywire.  My wife was sending emails that eventually were sent from my gmail account (mass neighborhood emails at that.....and all replies came to me instead of her).  I spent about 2 hours investigating and put together several different threads that finally fixed out problem.  The root of the issue is that you can share the same Incoming Mail Server for all of your gmail accounts and your mail will go to the accounts that it is supposed to go to, but you have to have individual Outgoing Mail Servers for each of your accounts otherwise all outgoing mail will come from one account only.  I don't know why this happened, it is a pain in the butt, but here's how I fixed it with 3 gmail accounts running through 1 mac.    
    1st - you need to remove all of your gmail accounts from mail via Internet Accounts in Settings. Just highlight the account and hit the minus sign at the bottom.  You won't lose anything if you have your gmail settings set to default which backs everything up to Google's servers....it will all load back to you mac and it will all be available online at gmail.com
    2nd - you need to add back all of your accounts one at a time (and follow all of the following steps for each account before adding another).  Select the plus sign and choose Google (for gmail accounts only). 
    3rd - Give your gmail account a recognizable name in the "Name" field (if you have multiple Gmail accounts to add, you will want to distinguish between them).
    4th - type in your username ([email protected]) and password.  Make sure to add the suffix @gmail.com. 
    5th - Check the boxes that you want to add to your mac (mail, contacts, calendars, messages, notes). 
    6th - Click the "Details" button to ensure that you have an adequate description (see # 3 above) if you are going to have multiple gmail accounts to add. 
    7th - Open the Mail app.
    8th - From Mail Preferences/Account Information Tab - make sure that you account is Enabled (check box next to "Enable Account", make sure that you have an adequate description name, email address is correct, Incoming mail server is imap.gmail.com, Username is your normal gmail login username (absent any suffix like .gmail.com), password is your gmail password. 
    9th - Then, from Preferences click on the Advanced tab and....Uncheck "Automatically detect and maintain account settings".
    10th - Then, go back to Account Information Tab and.....from the Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP List....
    11th -  You need to create an individual SMTP Server Account for each gmail account that you plan to add.
    12th - To do this click the plus button.  Server Name should always be smtp.gmail.com.  Type in your own Description (I recommend naming it after the gmail account that you plan to attach it to). 
    13th - TLS Certificate should be "None"
    14th - Click the Advanced Tab - From here, uncheck the box for "Automatically detect and maintain account settings".  Then make sure Port is 587 (default is 25 for some ungodly reason).  Check the box for "Use SSL".
    15th - Set authentication to "Password".  User name MUST contain a suffice (i.e [email protected]).  Password is your normal gmail password. 
    16th - Click OK. 
    17th - Now your back at Preferences/Account Information - Link your account to the SMTP server that you just created by using the dropdown box next to Outgoing Mail Server (SMTP). 
    18th - Save all changes and close out of Mail App. 
    19th - Restart Mail and recheck steps 8-15....for some reason my passwords kept getting erased, but they eventually saved and took. 
    20th - Add another gmail account by following these steps and then recheck all along the way for passwords, suffixes, everything.  You will want to make sure that your accounts are all properly linked to their respective Outgoing Mail Servers (hence the distinct naming descriptions).   
    21st - Once you have added multiple accounts send email between them to make sure that they are being sent from and received to the correct accounts. 

    Wow! Oh my goodness Patrick, thank you so much man. That's a ton of informatiion to take the time to write out step by step and share with strangers.  I really, really am grateful to you.  I've been dealing with this for a month, half the month I kept changing my passwords and kept assuming I was making some mistake.  It used to work fine.  About a week ago I started looking for a solution and couldn't find one that worked. 
    You have changed that sir!  I'm good to go, stress level will lower when I am on my Mac, and I'm so glad to not have all these messages popping back up that I was done with! 
    Muchos Gracias Amigo!  Owe you one...

  • How do I find the SMTP for my email acct on Firefox

    I am trying to activate MS Outlook for facilitate business communication. I need to know the SMTP for the outgoing mailserver used by Mozilla for my business email acct.

    Mozilla is not an email provider.
    To get the email details such as mail servers, you need to contact the company that provides the email service. This could be your ISP if you use their email, or if it is a webmail service such as Gmail or Hotmail you need to contact the provider of the webmail service.

  • How to configure SMTP for iCloud?

    I have never used the Mail program on my macs. I started using Eudora in 1995 and when Mail came along some years later, i didn't take to it, it didn't have the functionality i needed and enjoyed. Fast forward to a couple days ago, my Snow Leopard MacBook is wearing out and i got a new MacBook Pro running Mountain Lion.  When i was setting up the new computer, i thought iCloud would be configured automatically. It wasn't because i have a couple of different Apple IDs but i think that is straightened out now and i'm signed in using the me.com email address and have my calendars and contacts syncing with iphone and my other computer. Mail is working, but only for my me.com email address which i rarely use.  I mainly use a gmail address.
    I don't want to use Mail and i don't want mail to be downloaded to it.  That happened on my other computur, so that i had tens of thousands of messages in a program i never open and don't use. So i somehow turned it off so it no longer gets the mail from my other accounts.  i don't want to receive email in Mail. But because i can't use Eudora in Mountain Lion, i need a new email client. Today, i downloaded and installed Mail Mate, i want to try it out.  When I tried to use Mail mate to send an email i got a message saying "No SMTP server configured for iCloud." i googled how to configure SMTP for iCloud and what i found said it configures automatically. So i don't know what to do. I went to ICloud in system preferences and i don't see anything i can do there. 
    Is there anything i can get it to do to configure automatically?   All my software is up to date, if that makes a difference.

    i was persistently googling search terms for this problem and came across a link that gave information to the effect that for non Apple email clients, SMTP has to be configured manually, and the settings were provided. I entered them into Mail Mate and now it works.  So thankfully, this problem is solved.

  • Error message "incorrect pasword or user name given for gmail"

    When i'm conected to my home wifi or with 3G, i can't read my emails for my gmail account with Mail. Error massage says wrong pasword or user name given for gmail but it works when i'm on the wifi at work. I tried to disable SSL but i can't change any of the smtp stuff, it's all grey.
    All the pop smpt etc are activated on my gmail account.
    And it's the same on my iPad.

    I just googled your issue and found 100's if not 1000's of similar problems with verizon.
    Perhaps it's best to wait to try on their forums since it's apparently a widespread issue.

  • The BEST solution for gmail on the iPhone

    OK, so after much poking around, I finally figured out the best solution for using gmail on the iPhone: IMAP support.
    While I think Google is still rolling this out to all users, once you get it, USE IT! It basically keeps your mail app synced with gmail, and even supports the use of folders/labels.
    To see if your gmail account is ready for IMAP, go to the settings option in gmail and see if one of the tabs says "Forwarding and POP/IMAP." If you don't have IMAP available on your account yet, it won't say IMAP.
    Here's some links to get you started:
    setting up IMAP for gmail on your iPhone:
    https://mail.google.com/support/bin/answer.py?answer=77702
    how actions in your mail app sync to gmail:
    https://mail.google.com/support/bin/answer.py?answer=77657
    I hope this helps out everyone as much as it's helped me. I was a little frustrated before using POP, but gotta love IMAP! I'm not too sure the impact that this has on your battery life, but so far it's working well for me. Enjoy!

    Gmail and IMAP have totally change my tune about the iPhone's email abilities. I was getting frustrated with the inability to reliably get mail (Message has not been downloaded...), sync (have to delete mail from both iPhone and desktop Mac), etc., but now I have all my POP email accounts automatically forward to my Gmail account, and I only check Gmail with the iPhone and MacPro. So far, it's a whole new iPhone experience! No more errors - ALL mail comes through perfectly - and no need to manually sync!
    Note that, when setting up the Gmail/IMAP accounts, do NOT simply update your old POP Gmail settings on your Mac or iPhone! Start with a FRESH new account. I couldn't get either the iPhone or Mac to work until I started with a fresh account.
    Also, I was unable to send mail from the iPhone using the smtp.gmail address, so I had changed the outgoing mail setting to use my regular ISP's smtp address. But, at some point (a few minutes later or a few hours, I don't know) when I checked the Gmail settings on the iPhone, it had magically changed itself to smtp.gmail, with the port number, and it has been working perfectly ever since! Maybe IMAP can atomatically correct this info? Not sure.
    One more thing. Once you have Gmail IMAP working, then you MUST go here:
    http://5thirtyone.com/archives/862
    Follow these directions exactly. This is a necessary set of steps in order to make your iPhone and Mac sync correctly, so that trashed mail on the iPhone will go in the trash on your desktop Mac, etc. It's pretty freaky to check email on the iPhone, and then go to your Mac Mail a few minutes later, and see all the newly trashed (or saved/read) emails perfectly synched up!
    A final note. Once this is all working and synching, remember that if you delete an email on your iPhone, it gets deleted on the desktop Mac Mail as well (and vice-versa)... which is exactly what you want to happen, but I find that I have to remember to keep the mail that I want to save on the iPhone's inbox until I get back to my desktop Mac. Otherwise, I have to manually remove it from the trash to save it!

  • How to configure Email setting for Gmail in 4.1?

    Hello,
    I have problem to configure Email settings in Internal Administration\Instance Settings.
    What is correct settings for Gmail? (smtp port, ssl/tls).
    Regards.

    d_wilhelm wrote:
    Hello,
    as far as i know you need to use authentication with gmail to send mails through their smtp server. There are no options in the apex_mail package to set a username and password, so you can't use the inbuilt apex mail. You can try to use utl_mail.
    Regards,
    DirkHi,
    As I understand there is new feature in Apex 4.1 to use SMTP server that need authentication.
    http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21678/adm_mg_service_set.htm#sthref258
    Regards,
    Jari

  • Noika E5 Email manual IMAPsetting for Gmail/Yahoo/...

    Enable IMAP setting on your Nokia E5 ------------ this is working -----------
    1. on your Phone Select 'Messaging' > 'Options' > 'Settings' > 'E-mail' > 'Mailboxes.'
    “If you have never set up email on your phone before, select 'Yes' to define a new mailbox. If you already have other mailboxes, select 'Options' and then 'New mailbox.'’
    2. Select 'Start' to begin the setup wizard.
    3. Click on any one mail Yahoo or Gmail or Hotmail (for Ovi mail you need go to other…)
    4. If you have clicked on Gmail*** it  will ask email address ( '@gmail.com') but before moving forward enter you email address as (‘[email protected]') instead of (‘[email protected]') {enter ABC instead of GMAIL }  and then > your password then select 'Next.'>
    5. Screen will appear with three (Mail Exchange and POP/IMAP and Lotus Notes) 
    6. Select ' POP/IMAP' and then 'Next>
    7. Now put your correct  Email address (eg. ‘[email protected]’) > Same on User name > then Password>
    8. On Mailbox Type -------Select IMAP4 > and following are IMAP setting ---
    Note – for Yahoo and Ovi mail you can follow the point 3 to 8  (enter ABC instead of YAHOO or OVI)
    +++++++++++++++++++++++++++++++++++++++++++++++
    IMAP setting for Gmail ---
    Enter 'imap.gmail.com' as the incoming mail server
    Select 'SSL/TLS' for your security (ports) and define your port as '993.'
    Enter 'smtp.gmail.com' as the outgoing mail server
    Select 'StartTLS' for your security (ports) and define your port as '587.'
    +++++++++++++++++++++++++++++++++++++++++++++++
    IMAP setting Yahoo mail ---
    Incoming Server - imap.mail.yahoo.com
    Incoming Port - 993 (requires SSL)
    Outgoing Server - smtp.mail.yahoo.com
    Outgoing Port - 465 (requires SSL)
    +++++++++++++++++++++++++++++++++++++++++++++++
    IMAP setting OVI mail ---
    Incoming IMAP Mail Server:
    Server Address:  imap.mail.ovi.com
    • Secure connection: SSL (IMAP4S)
    • Port: 993 
    Outgoing SMTP Mail Server:
    •  Server Address: smtp.mail.ovi.com
    •  Secure Authentication: None
    •  Secure connection: SSL
    •  Port: 465
    +++++++++++++++++++++++++++++++++++++++++++++++

    AWESOME MAN!! I have beenstruggling with the setup on my new E5 for the last few days and finally I resorted to the web and found my solution with you. "@abc.com" did the trick I must say I wish Nokia guyz include these steps in the manual

  • I had a power failure 2 days ago, have power now, but cannot send email from my iPad. Everything was fine before that. The box says cannot send mail, the user name or password for Gmail is incorrect. I haven't changed anything. I need help. Thanks

    Hi
    I had a power failure 2 days ago, my computer is running again, but now I cannot send email from my iPad using Cox or my gmail account. I am receiving mail in my Cox account but not my gmail account.It was working fine until the power failure. It keeps telling me, the user name or password for Gmail is incorrect. I have not changed anything. I don't know what is wrong. Can anyone help me? Thanks

    I agree, unplug and replug your router, then reset your iPad by holding down the sleep and home buttons, ignore the red power down slider, and wait til you see the silver apple. let it reboot and then try your connection.
    Chances are rebooting the router will help. You may also need to talk to cox. They may need to reset something on their end.

  • I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

    I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

    Hi,
    According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
    Roger Lu
    TechNet Community Support

  • Can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead

    can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead

    The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have.  The diagnosis will be free.  Any extensive repairs will not be free.
    If you have minor software problems, you essentially will have to deal with them yourself.  Examine these two comprehensive documents for possible problem definition and solutions.  If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
    https://discussions.apple.com/docs/DOC-3521
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • Creating a Windows 7 OS desktop short cut for gmail with Firefox as browser, not internet explorer

    I have an HP laptop that originally had Windows Vista Home Premium 64-bit OS. I recently upgraded to Windows 7 64-bit OS. I want to generate a desktop shortcut for gmail that uses Firefox as the browser not internet explorer (8). If I use IE 8 as the brower and enter in gmail.com, gmail opens. I can right click on that page and create a gmail desktop short cut with IE 8 as the browser. If I try the same steps using Firefox as the opened browser, I can't create a desktop short cut by right clicking...it is not an option. I can't make Firefox my default browser for everything as my work programs/shortcuts require IE. Again, how do I create a direct gmail desktop shortcut that uses Firefox as the browser, not IE 8, when IE 8 has to be the default browser?

    You could create a shortcut to open Firefox with a specific site using a command line argument.
    You can copy the shortcut that you use to open Firefox, then right-click on it and choose '''Properties'''. On the shortcut tab, you will see the target, it will look something like this:
    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
    You can add gmail.com to this shortcut so it looks like this:
    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" gmail.com
    For more details see http://kb.mozillazine.org/Command_line_arguments

Maybe you are looking for

  • How can I log into my itunes account on a different computer?

    You see, I have a PC and my husband has a mac. My PC has recently died (due, I might add, to some music I downloaded from itunes that decided not to work properly, prevented any upgrades on the PC and then brutally killed it), but I need to sync my i

  • After Effects CS3 error: file not found -43 and TIFFIO failed to open the file

    Hello I am experiencing a problem with AE CS3. I have several TIFF sequences (with alphas) that are giving me a headache. When I import them into AE, I get an "AEGP Plugin TIFFIO: Failed to open the file" error. I researched the forums and found that

  • Bad REadings

    I found out that the virtual channel system is kind of problematic with my system. One of the NI engineers recomended me to use those, specially because they perform CJC on every reading automatically, and I did. But I wasted a lot of effort just to

  • BEx  in Windows Xp Front end

    We have BW ver 2.1. Recently I have upgraded my Front end from Windows 2000 to Windows XP. Now not able to run BW from Business Analyzer short cut. When I click its hang up & show not responding in Task manager. What could be the reason. Kindly help

  • Import Image from scanner to database Direct ..

    can any Colleagues help me .. how can i Import Image From Scanner directly if anyone can descuss code and how can i do that thank for all Colleagues .......