SOAP AXIS sender adapter response message

Hi all,
In our scenario a 3rd party app. is sending a request to our Sender SOAP Axis adapter. The message contains attachments and uses MTOM features. When receiving I have no problems. BUT when I sent a response I the SOAP AXIS adapter sents the attachmnt I received back.
Why does the AXIS adapter sents a response back with our attachment we received???? Any ideas? I tried to use a custom module to delete that part, but It cannot be edited. The modules input is just our normal message. Afterwards the attachment gets added...
Thanks

Not really sure about this, but have you tried to disable the Keep-Attachment option in the adapter (but if you're doing sync Axis comm., I don't think it would work as it would remove attachments when receiving them) ...
Chris

Similar Messages

How to set content type in SOAP AXIS sender adapter

Hi All,
I am trying to fetch the data from an URL which has special characters(like Ä, ï) using SAP PI - SOAP AXIS adapter. I am facing the below error in the channel.
“error during receive: java.io.UnsupportedEncodingException: charset: utf-8”
I need to set the content type as ISO-9958-1 but there is no such option present in the SOAP AXIS sender Adapter. Please let me know if there is any way to set the content type and fetch the data successfully.
Thanks,
Konda

Hi Sudha,
I have tried textcodepageconversion, Message
Transformation and Annomizer beans but didn't help and this error is in sender SOAP AXIS adapter.
Thanks,
Konda

SOAP sender Adapter - response message missing in adapter engine level

Hi,
We have a synchronous scenario SOAP<-> P I <--->Proxy .Request comes from web service get the response from ECC.
Issue reported that response message not reached the web service .
I am able to see the request & response messages in SXMB_MONI. To check the status in message monitoring through RWB synch message are not existing more than a day.
Is there any possibility of failure of messages at adapter engine level in this case? If so How can I get error log?
what are the settings required to make the synchronous messages available in RWB?
Thanks in advance,
Regards,
Kartikeya

what are the settings required to make the synchronous messages available in RWB?
Set messaging.syncMessageRemover.removeBody = false in NWA / Visual Admin. Have a look at the below link for details -
/people/william.li/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
Regards,
TK

Read URL paremeter value SOAP Axis Sender

Hello Experts,
For a specific scenario, there is a need to read a url parameter inside SOAP Axis Sender and pass it on to message mapping as dynamic configuration key.
For example,
Sender system is sending request at http://<host>:<port>/XIAxisAdapter/MessageServlet?senderParty=&senderService=Sender_System&receiverParty=&receiverService=&interface=SnderInterface_OB_Sync_SI&interfaceNamespace=urn:abc.com&parameter=ABC
Inside PI mapping, value being passed in "parameter" is required.
Please let me know how to do it.
Thanks & Regards,
Ankit Srivastava

Hi Ankit,
Check the page 5 of this document http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f?overridelayout=t…, you will find the java code to access to URL parameter. Pay attention to the lowercase/upercase in the paramName.
I haven tried with AXIS adapter, but with http_aae you can get the parameters with the java code (how to pass sender HTTP dyanmic configuration url parameters to pass to target message.):
DynamicConfigurationKey.create( "http://sap.com/xi/XI/System", "URLParamOne");
Regards.

Missing soap action in the soap axis receiver adapter ?

Hi Guys,
I could not find the soap action field in the soap receiver adapter and i followed the OSS note
Note 1054986 - SOAP (Axis) receiver adapter's SOAPAction field missing
Please apply the following patch and use the handler parameter defaultSOAPAction for the XI30OutboundHandler handler in the request chain. This handler parameter can be configured as a module parameter for the HandlerBean module associated with this handler. It is noted that this module parameter takes precedence over the channel parameter for SOAPAction if this field is available.
For SP12
XI ADAPTER FRAMEWORK CORE 7.0
Support Package 12, Patch Level 1 (SAPXIAFC12P_1.SCA)
we are on SP15 so i think the option should be available ?
Do i need to add this parameter in the Module Configuration ?
Moduel Key : ?
Parameter Name: handler.type ---> is this right
Parameter Value ---> ?
we need to validate the user id and pw on IIS for NTLM authentication. Any help regarding developong the handlers would be great
any help would be appreciated.
Thanks,
Srini

Srinivas,
You are on the right path...........yes that is the right note for this issue.
The problem is this is not a general fix that comes with all service packs as the axis adapter is not used a lot, that being said.if you dont see it with sp15..i would safely go apply this fix and see if it works..else you might have to open an oss note for the same...
Hope that helps..
Regards
Ravi Raman
P.S: On my home system..i did apply the fix and i was on a much higher sp level ..i saw some errors..in the logs but nothing a restart couldent fix..

SOAP Async Sender Adapter - Many logons

Hello,
I have a SOAP asynchronis sender adapter that is being used to recieve invoices. We are noticing that the suppliers who are invoicing us are calling the web service with all their invoices at the same time. (i.e. 2000 invoices in a matter of seconds). It appears that each of these web service calls goes through logon process.
Is there a way to configure a SOAP sender adapter to reduce the number of logons required for this situation?
Thanks,
Matt

Thanks VJ.
You wrote:
Change your interface to accept multiple invoices in one call
Are you suggesting that I should change the occurence setting on the Data Type for the Invoice Document from "1" to "1..Unbounded"? Or is there another method?
What is the standard process in PI for setting up an asynchronis web service?
Thanks,
Matt

HTTP Sender Adapter Response

Hi there,
Can I send a status code back to the sender of the HTTP request in case of a HTTP Sender Adapter ?
We need to send a response immediately to the Sender Application. The interface however is an asynchronous interface and a response with XI is only perhaps possible with BPM which would be rather complex for a small response code to be sent back ! Is there any possibility that some response is sent as soon as I receive a request on the SICF service ?
Amair

Hi Amair,
As Bhavesh suggested i also dont see a way you can do this unless by making the interface Synchronous. If you do so then it becomes so simple and u will not require any work arounds.
Regards,
Abhy

An email can't send "server response: Message contains spam...

One of my email accounts can’t send an email.. And the message came up
“Server response: Message contains spam or virus or sender is blocked: field32_1e2afb1a2cd02"
It says to select a different out going server..
Have I done something wrong, or is there a setting I need to change?
Thank you

Hi
Could you please confirm if the issue was resolved or needs further assistance?

Synchronous Receiver JDBC adapter--response message empty

My scenario is ABAP Proxt to JDBC synchronous case where I am calling a stored procedure "GetEmployer" to get the relevent data. There is no input data to the stored procedure, just need to call the stored procedure to return the records.
In the SXMB_MONI I am getting the response message as empty with no records.
In the communication channel monitoring it is showing successfully processed.
Request Message :
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_IRIS_SELECT_JDBC_REQ xmlns:ns0="XXXX">         <STATEMENT>
<GetEmployer ACTION="EXECUTE"></GetEmployerList>        </STATEMENT>                      </ns0:MT_IRIS_SELECT_JDBC_REQ>
Response Message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_IRIS_SEL_PRXY_RES xmlns:ns0="XXXX"> <STATEMENT_response></STATEMENT_response> </ns0:MT_IRIS_SEL_PRXY_RES>

Hi All,
          If I am trying to test the configuration in the ID I am getting the following error.
Runtime error      Unable to read the payload from the     message object
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Mapping is already determined in the interface determination </Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 35933EB051F13E60906107DF6862E093 </Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 640C5B80B54311DCABA9F7BB0A126A22 </Trace>
<Trace level="1" type="T">Interface Mapping http://XXX/employer_list</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_EMPLOYERLST_ </Trace>
I am getting the success flag in SXMB_MONI but getting no records in the JDBC response message. It is not throwing any error and the interface is running successfully.
Could you please suggest some solution for this.
Thx in advance
Ravijeet Das

SOAP Axis sender with CSV file attachment

Hi Experts,
I have a requirement where I receive a CSV file attachment from a Web Service post ( i.e a SOAP sender with attachment). I decided to use SOAP with Servlet(Axis) protocol, since standard SOAP sender does not allow modules to be used.
I am able to test this interface through SOAPUI with attachment to the point where I can get the attachment payload as my main payload in IE, but it fails in mapping since CSV needs to be converted to XML. I have following queries for proceeding ahead with this scenario:
1. How do I convert the CSV attachment to XML inorder for mapping to be used in IE. Is there a standard axis handler available for this ???? Also where should this handler be called in the sequence of Axis modules ???
2. Can I use MessageTransformationBean for converting plain to XML ??? If yes where should this module be called in the sequence of Axis modules. I tried using this module between the CallSapAdapter and the first AdapterBean but it returns exception in SOAPUI saying " Messaging exception: No Main"
3. Is there a blog available which illustrates about using additional modules/handlers in Axis. I have had a look at the FAQ note of Axis but it just gives the overview.
Thanks.
Siddhesh S.Tawate

Solved :).
1     AF_Adapters/axis/HandlerBean                     Local Enterprise Bean                              xireq
2     AF_Adapters/axis/AFAdapterBean                     Local Enterprise Bean                              afreq
3     localejbs/AF_Modules/MessageTransformBean    Local Enterprise Bean                     Plain2XML
4     CallSapAdapter                                          Local Enterprise Bean                              sap
5     AF_Adapters/axis/AFAdapterBean                    Local Enterprise Bean                             afresp
6     AF_Adapters/axis/HandlerBean                    Local Enterprise Bean                             xires
Above sequence worked. I guess I was missing some parameter in content conversion earlier.
Thanks.

JMS Sender Adapter Sharing Message Queue

Hi all.
I´ve some scenarios (request/replay) with JMS Adapter and MQ Series. All of them working againts the same queues.
In the sender side, each sender channel for each scenario must read from the same queue with a message selectors. The problem is that I have just one User to access the queue but the sender channel opens the connection in exclusive mode. So I can´t activate all sender channels at the same time (shared mode) without error.
Is it possible having more than one sender channel againts the same queue, with the same user?
Thanks a lot,
Gari.

Sorry, it's solved. The queue was not well defined in MQ Series so I couldn't connect more than one channel to it.
Thanks.
Gari.

Connection Refused when sending adapter test message XI 2.0

I have received a "java.net.ConnectException: A remote host refused an attempted connect operation." when sending a "Test Client Sending out a Plain Single-Part MIME Message". I have validated the host name and am not sure where to validate the Port and Url it is sending to. Defaults to Port/Url "8230/JMS" Where do I look to validate this is correct?

Hi Dan,
You are thanking a poster for his answer.
Please next time also give him points.
See: /people/mark.finnern/blog/2004/08/10/spread-the-love
This time I did it for you.
Remember: When you ask a question you also assume the responsibility to assign points.
Please check your other questions and if the answers were good.
Spread the love and give some points.
Thanks in advance, Mark.

XI30 SPS16 - SOAP Sender Adapter - self-defined SOAP-Header

Hi Folks!
My scenario is that I have to send a synchronous SOAP message to an external receiving system which expects certain processing information in the SOAP header. That external system then synchronously sends back a response SOAP message to tell me the processing results of my request message.
The How-To Guide SOAP Adapter says that for the request message I have to create the whole SOAP Envelope (SOAP Enevelope, Header and Body) on my own within the mapping and that I have to remove the SOAP header in the response message. Unfortunately this guide does not tell me how this can be realized.
In other SDN threads I've read that this can be achieved by using XSLT mappings. Unfortunately I have never done this before and currently I have no clear idea how to do this. And to be honest: I am everything else than an XSLT expert (historically I'm coming from the ABAP part of SAP R/3).
My plan is to create the request payload using the graphical mapping tool and to add an XSLT mapping as 2nd mapping to build the SOAP "overhead" around the payload.
For the response my plan is to first use XSLT mapping to remove the SOAP "overhead" from the response message and then use the graphical mapping to handle the payload.
Questions:
1. Is this possible?
2. How can I achieve this?
3. Can anybody send me an XSLT mapping sample to create a SOAP envelope, header and body around the payload for the request message?
4. Can anybody send me an XSLT mappping sample to remove the SOAP envelope, header and body around the payload for the response message?
Because I'm everything else than an expert in XSLT mappings, some kind of a "click guide with samples" would be VERY GREAT!
Thanx in advance to anybody who will help me!!! For real help maximum points are guaranteed.
Regards,
Volker
mail: [email protected]

Hi Volker,
Try this XSLT code, chanfe the TODO part.. add the SOAP header part. Save it as .xsl. ZIP it and import it in the Imported archive. Please test it I have'nt test the code as I dont have a system access now.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
<xsl:template match="/">
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Header xmlns="http://schemas.xmlsoap.org/soap/envelope/">
--- TODO -
</Header>
<soap:Body>
<xsl:copy-of select="*"/>
</soap:Body></soap:Envelope>
</xsl:template>
</xsl:stylesheet>
For the rest have a look at this thread
SOAP Adapter: DO not use soap envelope
Thanks,
Prakash

How to send response message from Java mapping class? Please help!

Hi Experts,
I have a sync scenario
          -Req--> -
>
SOAP           XI       RFC
          <Res--     <-----
The Req message contains:
<Order>
       <Orderid>100</Orderid>
       <Desc>Extrenal Order</Desc>
       <Qty>2500</Qty>
</Order>
Response message is:
<Log>
     <LogTxt>Qty value cannot be more than 3 chars</LogTxt>
</Log>
In the XI I have to validate the input request message using a schema. For this I am writing a java mapping program using aii_map_api.jar.
My requirement is that If the input message schema validation fails then I want to send a response message back to sender.
How can I send a response message back to the sender in java mapping program?
Kindly help with sample code example.
Thanks
Gopal

Hi,
First, I think PI 7.1 has this functionality and perhaps it comes in a SP for PI 7.0 and XI 3.0. So first have a look at that before creating custom development.
Second, if you use the java mapping, you will only have access to a request or response message. I would advise using a custom java module in the module processor and insert this message in the sender communication channel. This will allow you to validate request and send a response.
Regards,
Yaghya

IDOC Response Message

Hi,
My scenario is File to IDOC .. from the source I'm getting the data in a xml file and I'm loading it to SAP through IDOC.. scenario is working fine... but I want to send back the response message of IDOC posted successfully or if any Errors.
from the XI point i know that through BPM we can achive this.. but in the SAP-R/3 side how can we send the Response message.. is it need to use any other IDOC for capturing these messages and send it back to the XI system or any other options please suggest me..
I wnat to send back the IDOC status messages (Success or Failure ) . please suggest me .
Regards
Jain

hi,
you have to just configure ale audit at the receiver side and a idoc adapter in XI.
this link will be helpful:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
regards,
ujjwal kumar

SOAP AXIS sender adapter response message

Similar Messages

Maybe you are looking for