SOAP Synchronous messages

Hi experts,
I am testing SOAP synchronous messages. this is sender is SOAP receiver is ABAP proxy.
while testing if the message is successfully processed, i am not able to see the message details in SXMB_MONI.
but if any errors are processed i am able to see the error message.
Here my question is for synchronous interface can we see the sucessfull messages in SXMB_MONI.
thanks
Srinvas

HI Srinvas,
-->Recheck your entire scenarios once again if the process flow involves the Integration Engine definately the messages should be visible in the SXMB_MONI.
-->So you are inserting the Record into db table using the ABAP server proxy.......
-->I think there may not be any problems in the configuration of INtegration Engine, SXMB_ADM since you can view the error messages.
Thanks

Similar Messages

Synchronous messages through Soap Adapter

Hi XI Guru's
In my scenario I am sending a synchronous soap message over soap adapter. Message flow is like
3rd Party Application --> XI --> SAP R/3.
My message do get processed in SAP R/3 and I do get response in SXMB_MONI as well as in Message Monitoring in RWB.
The return message for message f1bdf1d0-cec5-11de-a9c0-0050569626f6(OUTBOUND) was successfully passed to the waiting "call" thread.
2009-11-11 05:27:26     Information     The message status was set to DLVD.
2009-11-11 05:27:26     Information     SOAP: response message entering the adapter (call)
2009-11-11 05:27:26     Information     SOAP: response message leaving the adapter
But still the response from XI does not reaches 3rd party application.
On digging the logs I found following message. Can this be an issue in XI which is blocking the reponse message from reaching the 3rd Party Application.( I tried posting the message through XML spy and I do get the response in XML spy.)
(Note : My XI Installation has central adapter engine)
#1.5 #0050569626F6004200000D0B00000B5000F66675B4B8DEA5#1257401122698#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/com.sap.aii.adapter.soap.app#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#LOVEIN#25369##sapnw03_NPI_6935550#Guest#2fd59d51c9d111debb440050569626f6#HTTP Worker [4]##0#0#Warning##Plain###Cannot send an HTTP error response [500 "Application error occurred during the request procession." (details: "The WebApplicationException log ID is [0050569626F6004200000D0800000B5000F66675B4B8DEA5].")]. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: *The stream is closed.*
+     at com.sap.engine.services.servlets_jsp.server.runtime.client.ServletOutputStreamImpl.ensureOpen(ServletOutputStreamImpl.java:354)+
Any help in this regard is appreciated .
Thanks
Lovein

Thanks for your reply Stephan / Abhishek.
To add some more info on the issue. This issue is when I am using PI 7.1 version.
I do not face the issue if I use XI 3.0 and end to end flow works fine and response message reaches 3rd party application.
Only difference I have in 2 versions is that in XI 3.0 we have been able to disable the soap adapter authentication (by changing web.xml file) where as in PI 7.1 we have not been able to disable that authentication and userid/ password info has to be provided while sending the soap message from 3rd Party application.
(Security if not disabled gives 401 message as described on following blog [SOAP Sender ADAPTER 401 No Authorisation|SOAP Sender ADAPTER 401 No Authorisation] )
On the other note do you guys know a way to disable this authentication on PI 7.1 version.
Thanks ,
Lovein

BPM: System_Error" SOAP fault message received

Hi,
We upgraded SAP system from 4.7 to ERP2004 on 09/17/05.
We have XI-3.0 version from last 9 months and this BPM was working good so far. We have not changed anything in it except we upgraded the SAP system.
We are using ABAP proxy from SAP to send "userid"
message to XI-BPM and then it would make a Synchonous call to SAP system to get roles of those "usrid".
In the first step when it is sending data to XI an exception is raised and in the second step when it tries to make synchronous call to SAP we are getting error:
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="System_Error">SOAP fault message received</Trac
<Trace level="3" type="System_Error">SOAP fault code: Client</Trace>
<Trace level="3" type="System_Error">SOAP fault string: Error during c
I noticed that the XML name tag looks different now
Before upgrade when message was successful.
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:MT_ECA_USRID xmlns:ns1="http://bcm.edu/common"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<USRID>CLARKSON</USRID>
<USRID>2_MA140016</USRID>
</ns1:MT_ECA_USRID>
After upgrade when message is failed
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:MT_ECA_USRID xmlns:nr1="http://bcm.edu/common">
<USRID>AABULIMI</USRID>
<USRID>AB147899</USRID>
<USRID>ACHALL</USRID>
</nr1:MT_ECA_USRID>
You would notice that
" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
missing after upgrade.
I would appreciate if anyone could help me.
Mrudula

Hi,
Can you paste the full error message. Also take a look at the default trace log in Visual Admin. Set the logging for soap to debug.
Naveen

File to Soap synchronous Scenario

Hi Experts,
I have designed an synchronous File to SOAP scenario in PI 7.31. I am able to send the request am getting the response to target path also correctly but am not able to see the msg in SXMB_MONI.am not using ICO am using dual stack in PI 7.31 plz help on this.
Regards,
Rajendar K

Hi Rajendar, what does your configuration look like? (e.g. Service Interfaces, Oparation Mapping)
I'm trying to do the same but SOAP response message is not getting back into IE. I have LOGGING_SYNC already set to 1.
Thanks, Aaron

PI 7.1 Adapter Module Development - Identify SOAP Fault Message

Hi Experts,
here's a PI 7.1 Adapter Module Development issue I hope you can help me to resolve. It's about identifying SOAP fault messages.

Scenario at a glance:
Adapter Modules placed in the modules chain at request and response time in a synchronous Scenario:
- Request: SOAP Axis to RFC 
- Response and Fault Response: RFC to SOAP Axis

The issue is how to identify SOAP fault message in SOAP Axis Adapter Module in the response message:
The client gets SOAP fault messages like the follwong one:
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <ns1:exception xmlns:ns1="http://typen.geschaeftsstelle.pab.barmer.de">
 <ns1:errortext>bla bla bla ...</ns1:errortext>
 </ns1:exception>
 </detail>
 </SOAP:Fault>
 </SOAP:Body>


But when trying to access the tags faultcode and/or faultstring in the adapter module via xPath expressions I do not get them. Obviously the SOAP Fault tags are built AFTER the adapter module has been passed. So my question is:
How can I clearly/uniquely detect a SOAP fault response message (and distinguish it from a "normal" response message) in my SOAP Axis Adapter Module?

I tried it the following way:


// Check Message Payload for SOAP Fault Message via xPath expressions
...
// SOAP Fault Code
zv_xPression = zc_constXPattern.replaceFirst("&", "faultcode");
zv_soapFaultCode = XPathAPI.eval(zv_doc, (String) zv_xPression).toString();
// SOAP Fault String
zv_xPression = zc_constXPattern.replaceFirst("&", "faultstring");
zv_soapFaultString = XPathAPI.eval(zv_doc, (String) zv_xPression).toString();
// check for SOAP Fault Message
if (zv_soapFaultCode.equals("") && zv_soapFaultString.equals("")) {
 // Create Audit Log entry - NOT a SOAP Fault Message
 zv_msgText = zc_constModuleName + " 0190: xPath - OK! This message is NOT a SOAP Fault Message";
 zv_audit.addAuditLogEntry(zv_msgKey, AuditLogStatus.SUCCESS, zv_msgText);
 zv_faultCheck = false;
}
else {
 ...
 // Create Audit Log entry - SOAP Fault Message
 zv_msgText = zc_constModuleName 
 + " 0200: xPath - this message is a SOAP Fault Message. " 
 + " - Faultcode is: " + zv_soapFaultCode 
 + " - Faultstring is: " + zv_soapFaultString; 
 zv_audit.addAuditLogEntry(zv_msgKey, AuditLogStatus.ERROR, zv_msgText);
 ...
}
...

But zv_soapFaultCode and zv_soapFaultString are always empty (with other payload tags this coding works fine).

Any ideas? 
Thanx very much in advance!
Regards,
Volker

Hi Alex!
Like already mentioned I solved my problem by identifying the SOAP exception with the messageClass attribute of the PI message header. Acess code:
try {
String zv_msgClass = zv_piMsg.getMessageClass().toString();
} catch (Exception e) {
zv_msgText = zc_constModuleName
+ " E0110: Message processing terminated."
+ " Reason: Error while getting MessageClass "
+ zv_dataSource
+ e;
// create trace and audit log entry (severity ERROR) for exception
zv_location.errorT(ZV_SIGNATURE, zv_msgText);
zv_audit.addAuditLogEntry(zv_msgKey, AuditLogStatus.ERROR, zv_msgText);
ModuleException me = new ModuleException(e);
zv_location.throwing(ZV_SIGNATURE, me);
e.printStackTrace();
throw me;
} // end of try-catch-block
But I do not think this will solve your problem. I am almost sure, that something in your Axis configuration is wrong/missing. If a handler cannot be instatiated then it really may be missing. Have a look at defaultTrace.trc. Maybe you will find more suitable information about the root cause of your problem. Also have a look at NWA under software components and/or application modules if you can find/see your modules.
But there is a general issue when trying to catch PI fault messages. If e.g. the requestor tries to login with wrong userid/pasword, then you will have no chance to catch this kind of error - at least as far as I know. Because in this very early stage of PI message processing no module is called.
One last question: Did you develop your own Adapter or just an adapter module? In the first case: Is your adapter started and healthy? Have a look at RWB -> communication channel monitoring.
Regards,
Volker

SOAP : response message contains an error Application/UNKNOWN/APPLICATION_E

Hi All,
I am working in a Proxy to SOAP synchronous scenario. Message is processing successfully through IE but i am getting the below error in receiver (SOAP) communication channel.
SOAP : response message contains an error Application/UNKNOWN/APPLICATION_ERROR.
Please suggest what will be possible way out to resolve this issue.
Thanks,
Priya Ranjan

Dear Priya
Have you configured Fault Message for this scenario.
This kind of error is generally thrown by the end target system where the message is not processed succesfully due to some error in there system.
Sourabh

Javax.xml.soap.SOAPException: Message send failed: Connection timed out

Hi,
where can i adjust the timeout for:
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection timed out: connect
The webservice needs 5min to return a message....
I found a duplicate of this on thread:
error initiating a test instance
But no answer
Message was edited by:
HEWizard

I found http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/events.htm#BABGGADB
Setting Timeouts for Synchronous Processes
For synchronous processes that connect to a remote database, you must increase the syncMaxWaitTime timeout property in the SOA_Oracle_Home\bpel\domains\default\config\domain.xml file:
<property id="syncMaxWaitTime">
<name>Delivery result receiver maximum wait time</name>
<value>60000000</value>
<comment>
<![CDATA[The maximum time the process result receiver will wait for a
result before returning. Results from asynchronous BPEL processes are
retrieved synchronously via a receiver that will wait for a result from the
container.

The default value is 60 seconds.]]>
</comment>
</property>
But this changes nothing...
Is this value ignored?

Error in Proxy to SOAP synchronous scenario

Hi Gurus,
Hope you are doing well. I have a Proxy to SOAP synchronous interface interacting with an external system (system outside the firewall/landscape of my company).
When I am trying to post the request message from XI, I am getting the following error.
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs
In the WSDL provided by the external application, i.e. receiver WSDL, there is no attribute/field with the name 'IncludeExceptionDetailInFaults' and there is no fault string defined.
Where is this error being thrown up? Is it a network/firewall error that XI is unable to determine?
Please provide an answer as soon as possible.
regards
Debansu

Hi,
i think it is the problem in the WSDL provider system, because it is throwing the Error with some string".NET",
do the below steps for investigating the issue
1)try pinging the URL provided in the WSDL from internet explorer.
2)if it is successfull, try to push one message from SOAP UI to by importing that WSDL, if you get any error then it is problem in the end system.
Thank You,
Madhav

IDoc to soap synchronous scenario with BPM

Hi,
I am working on IDoc to soap synchronous scenario using BPM. Here i am facing lot of soap exceptions in my production system. I handled the exceptions. The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second time. Please let me know why the exceptions are getting, and different type of exceptions and solutions for the same.(Blog also is fine)
Thanks & Regards,
Pragathi.

The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second
time.
Ideally you should not get an exception for the same data....can you tell is the description and where are you getting the exception...is it a part of the SOAP message or some object?
An exception might have occured because the description would be something unacceptable by the target application.
and different type of exceptions and solutions for the same
there would be many blogs....your thread would be spammed...better make a search on SDN with exception text that you are getting.
Regards,
Abhishek.

File-to-soap synchronous

Hi
I have a scenario where i have to create the file-soap synchronous
how we achieve that
1. Do i have to create the outbound message syn for file
venkat

Hi JV
We can do that without using the BPM if we have SP 19 for XI 3.0 or SP 10 for PI 7.. By using the Modules.
File - RFC - File without a BPM - Possible from SP 19.
venkat
Edited by: venkatesh sedamkar on Dec 31, 2007 9:13 PM

ERROR During call of SOAP with a SOAP- RFC- SOAP Synchronous scenario

Hello Experts,
I've recently created a SOAP->RFC->SOAP synchronous scenario but every time I'm invoking the SOAP via XMLSpy then i will hang and send a timeout error. Also a log in XI was generated as shown below.
I hope you could help me on this one.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          28.09.2010 09:31:23
Short text
     SQL error in the database when accessing a table.
What happened?
     The database system detected a deadlock and avoided it by rolling back
     your transaction.
What can you do?
     If possible (and necessary), repeat the last database transaction in the
      hope that locking the object will not result in another deadlock.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
     procedure "DELETE_LUW_PACKET" "(FORM)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The database system recognized that your last operation on the database
     would have led to a deadlock.
     Therefore, your transaction was rolled back
     to avoid this.
     ORACLE always terminates any transaction that would result in deadlock.
     The other transactions involved in this potential deadlock
     are not affected by the termination.
Regards,
Alfred

Normally such an error comes when the DB of SAP PI is full.
Contact your BASIS or ADMIN team and ask them to free the DB space.
Regards,
Abhishek.

SOAP response message error

Hi,
We have a scenario where in we perform a synchronous send from a BPM and post the request to a url using a SOAP receiver channel.
When we test the scenario,the message fails in PI with the following error "com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error"But when we try to test the same in SOAPUI by using the same payload,we do not have any issues in getting the response back.
Please could anyone advise on what could be the issue.
Thanks and Regards,
Induja

>
Induja Ramesh wrote:
> Resolved.
How?

Avoid processing of Duplicate Synchronous Messages

Hi,
I have two synchronous messages coming with almost zero delay in it. Both the messages contains the same data which is causing a major problem in the backend.
I want to avoid the processing of duplicate message. My scenario is HTTP to SOAP (sync)...
The option that I thought of are:
- Using BPM so that messages can be sent sequentially to backend and there it can be checked for duplicate entries (client is not ready to use BPM)
- Providing Delay in Message Mapping...(I will end up with same issue as same amount of delay will be provided to both the messages may or may not but dont want to take risk)
- I cant make a look up to see if entry already exists as the difference between incoming duplicate messages are so small that it will not give the desired result.
Also thought of creating message ID in URL only but it is not possible with QOS BE.
Is there any way through which I can process the sync messages in sequential way... or something that will avoid processing
of duplicate messages?
Any thought?
Thanks,
Sunil Singh

Hi Sunil,
Checking the data weather is duplicate or not (ie, its already resides in Rev application) would sure require to use of lookup or BPM.
>
SUNIL SINGH wrote:
> I want to avoid the processing of duplicate message. My scenario is HTTP to SOAP (sync)...
even if the data is comming with some delay between them. how will you check that is duplicate message or not unless you use lookup or BPM in it to compare two independent messages at runtime.
My idea would be! instead of trying to put a validation at PI.
check in the source system whats causing their application to generate duplicate messages in first place and send it to PI.
check whats the issue over there and ask them to rectify it or rather not to trigger duplicate data. (it would be easier to control this from source application).
PS: even if we find a way to stop duplicate messages to be processed inside PI. its unnecessary load for PI.
-->Senthilprakash.

SOAP synchronous receiver dynamic confiuration

Hi.
I have a problem with a synchronous receiver SOAP.
I have a SOAP to SOAP synchronous flow, with some java modules, one java module before the SOAP receiver and one after.
The flow look like this:
SOAP sender -
> SOAP request java module -
> SOAP receiver -
>SOAP respone module.
The problem is that I set some dynamic configuration in the soap request java module but I can't retrieve them in the soap response module.... the soap receiver has erase them.
Is there any way to keep dynamic configuration in a SOAP synchronous receiver??
Thanks.
Marty Johann

Dude,
the dynamic configurations refer to one message, in the sense they are stored in the message's header.
But if you send that message and receive a response from it, that's a whole different message (they have different Message IDs), you see? It is not to be expected to find the same dynamic configurations in the response message, since it is a whole different message, with an independent header area.
That being said, I do have some scenarios where the dynamic configurations are persisted in soap sync messages. Why is that? I have no clue...
Regards,
Henrique.

Problems with synchronous message in XI

Hi
I have the following scenario involving XI 3.0 ( SP 12 )
XI has exposed a webservice ( WS provider ) and this webservice is being called from a web application. On receiving the webservice call, XI synchronously calls a RFC on the SAP backend and the response is mapped back as a webservice soap response to the calling web application.
Now, I see sometimes ( not always ) - the incoming message from the web application has a status in SXMB_MONI -
Message scheduled (commit follows)
with a green flag and this message is never processed - i.e The message comes into XI from the webservice call - but beyond this - there is no call to the RFC receiver adapter ( the receiver adapter- comm channel is ok as seen in the adapter monitoring )
Since synchronous messaging does not involve any queues ( I hope my understanding is right ), I am not sure why this occurs and what to do to push the message forward in this synchronous messaging scenario ??
Thank you in advance for your time .

Hm we have a slightly different version of that problem.
The message is wirtten into a queue, gets the green flag and the message is processed.
But the flag as well as the status stay...
Has anyone soem background information about how the queuing and scheduling and execution planning is done?
I have quite an idea about queue filters and how to set-up queues. But I have no idea how the synchronous stuff fits in and what this "Message scheduled (commit follows)" exactly means.
Cheers,
helge

SOAP Synchronous messages

Similar Messages

Maybe you are looking for