SOAP to Normalized Message

HI,
I am facing problems in converting SOAP message to NMR Message.I read spec but it talks very little about it.
I feel there should be more information on this.Also if you can put some sample example will help.
Pls dont give me link of SUN Soap Binding as that doesnt follow JBI Spec for handling Header properties.
Regards
Pavitar Singh

Rajesh,
At a basic level, using SOAP envelopes to hold normalized message content simply is impractical. Firstly, the SOAP envelope is not the schema-described message; it is a transport-level artifact, not an application-level document.
Second, its bad SOAP. SOAP has a whole processing model, that doesn't have an equivalent in normalized messages. Would enforcement of "mustUnderstand" attributes be done by non-SOAP components?
Third, it harms interoperability. What about other binding components? Should my EDI binding convert to SOAP envelopes? Must all components that receive normalized messages with SOAP-enveloped contents understand it, in addition to "normal" XML messages? A SOAP BC is just one way to connect remote providers and consumers. It seems a heavy cost to force SOAP on all plug-in components just to make writing a SOAP BC easier.
The normal way a SOAP binding keeps track of the original inbound SOAP message (if it needs it for subsequent processing of a response) is to attach the original SOAP envelope to the normalized message, as a property. The only SOAP headers that need to be "translated" into message properties are those that are needed by the service provider.
-Ron

Similar Messages

  • Normalized Message

    Why a new Normalized Message in JBI ? Why cannot SOAP be used ? what i can see is Normalized Message has is the payload message, metadata and attachments.All these three can be addressed by SOAP.(Message Body, header and attachment )
    Regards,
    Siddharth

    Hi radhi,
    Can you clarify your problem with IOError :502?
    Is this happening for a application(s) that you are developing on you own? Or is this only happening when you try to follow the instructions for the LoanProcessing sample?
    From another email, I gathered that youa re seeing something like this:
    Dec 9, 2006 2:21:44 PM : Retrieving Location: http://localhost:8080/WebApplication1/NewWebServiceService?wsdl
    Retrieved : http://localhost:8080/WebApplication1/NewWebServiceService?wsdl
    Saved at: D:\Netbeans5.5pro\BpelModule2\src\Partners\NewWebService\NewWebServiceService.wsdl
    Retrieving Location: http://ITON-DEV30:8080/WebApplication1/NewWebServiceService/__container$publishing$subctx/WEB-INF/wsdl/NewWebServiceService_schema1.xsd
    Found in document: http://localhost:8080/WebApplication1/NewWebServiceService?wsdl
    Error: An I/O error occured. Server returned HTTP response code: 502 for URL: http://ITON-DEV30:8080/WebApplication1/NewWebServiceService/__container$publishing$subctx/WEB-INF/wsdl/NewWebServiceService_schema1.xsd
    This is the error you saw? And you are still having it?
    It seems to me that there is some discrepancy in the host names that are being followed by the retriever logic. For instance, the initial retreival of ?wsdl is accessing localhost:8080, but the subsequent attempt to retreive the NewWebServiceService_schema1.xsd is attempting to access /ITON-DEV30:8080/ . If /ITON-DEV30:8080/ is not accessible this would explain the IO error.
    However, a secondary mystery is WHY the xsd reference is resolving to /ITON-DEV30:8080/ instead of localhost;8080?
    I am trying to involve the engineers who are responsible for the "retreiver" code. They will ask more germaine questions.

  • OpenESB: read message from Normalized Message Router

    Good morning,
    I have to build a simple Business Monitor System.
    I use NetBeans 6.5, Glassfish v2 with OpenESB.
    My Question is:
    there is a way to read messages exchanged between two different application (for example my CASA application and Salesforce CRM wsdl)?
    Obviously all application are attached to the ESB.
    I know that all SOAP messages are transformed to Normalized Message (by Normalized Message Router) and then sent over the ESB, so I think there is a way to read all messages (but I didn't find it).
    Thanks
    Matteo

    Thank you Mark,
    I modified the test Observer a bit just to dump the message exchange. Actually it seems to work, except for a weird thing: The message count is always 0 for any message exchange I log, like there are no Normalized Messages in the MessageExchangeImpl. Am I missing something obvious? I'm just calling the toString() of the MessageExchage in the run() method of the ObserverLifeCycle class, I'd expect to see some messages sometime.
    ExchangeId: 3389965929356-12104-134580929097830184
    Pattern: http://www.w3.org/2004/08/wsdl/in-out
    Role: CONSUMER
    Consumer: Null
    Provider: Null
    Index: 1 SynchState: NONE
    EndpointLink: caMainSample,casaService1,casaPort1
    Status: ACTIVE Location: LOCAL Transaction: None
    Service: null
    Endpoint: http://enterprise.netbeans.org/bpel/MainSample/MainProcess,MainPL,servicePortTypeRole_myRole
    Operation: {http://j2ee.netbeans.org/wsdl/SubSample/service}serviceOperation
    Interface: null
    Properties Count: 0
    DeltaProperties Count: 4
    Name: com.sun.jbi.messaging.messageid
    Value: 1
    Name: com.sun.jbi.observer.receiver
    Value: sun-bpel-engine
    Name: com.sun.jbi.messaging.groupid
    Value: b0ea5c93-151c-4559-877f-e49bd6bdac35
    Name: com.sun.jbi.observer.sender
    Value: sun-http-binding
    Message Count:   0
    Thank you & regards
    M.

  • My iMessage does not appear to be working. Every time I go to reply to an existing message it just appears as normal text. I have tried to create a new message but it still just defaults to normal messages. I have checked my settings but looks ok. Help?

    My iMessage does not appear to be working. Every time I go to reply to an existing message it just appears as normal text. I have tried to create a new message but it still just defaults to normal messages. I have checked my settings but it is all set up as it should be. Is there anything I've missed or could try? Thanks

    Try the following:
    In Finder, select the problematic volume and then press command-I.
    Expand the Sharing & permissions section if it's collapsed.
    If the section is locked, then unlock it by pressing the padlock button and then authenticating as directed.
    Tick/check Ignore ownership on this volume.

  • SOAP Response Error Message

    Hi Experts
    I am working on a RFC to SOAP scenario, where RFC is Asynchronous and SOAP is Synchronous,
    Message are being sent to SOAP and Response are coming back from Reciver system into PI server and it is failing i.e error status because there is no map for the response,
    How can we make the Response message not to error out without doing any mapping in PI 7.0
    Thanks
    PR

    HI,
    When sending the RFC, send asynchronously, meaning call 'in background task' and 'commit work'. Since the QOS for this type of call is EO, the asynchronous nature will be propagated to the receiver end and you should see no response being generated.
    This can help you:
    /people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
    And Hope that you have removed expor parameters of RFC and reimported in to ESR.
    Let us know if this resolves your problem
    Thanks
    Divyesh Vasani

  • My friend recently switched from iphone to blackberry, but my messages to her are still sent as imessage. how can i send it as a normal message? she doesn't receive any of my messages. her phone number is saved in my phone under the phone tab, not iphone.

    My friend recently switched from iphone to blackberry, but my messages to her are still sent as imessage. how can i send it as a normal message? she doesn't receive any of my messages. her phone number is saved in my phone under the phone tab, not iphone.

    Sounds like your friend didn't disable iMessage on his/her iphone before switching.  Have your friend do the following:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "edit products"
    Click on the "x" to the right of his/her old iPhone.
    Click "unregister"
    This should unregister it with the iMessage server, which will allow you to send texts as normal SMS.
    On your iPhone make sure you have Settings>Messages>Send As SMS set to ON.

  • Problem to send SOAP 1.1 message

    Hi,
    I have a piece of code developed with SAAJ and I am trying to import it in an existing web application developed with Weblogic Workshop 8.1 SP3. My problem is that the classes of javax.xml.soap are packaged in one of the weblogic libraries (webservices.jar I believe).
    When I try to use external jar (picked from SAAJ), it always uses the BEA libraries instead. As, by default, it sends SOAP 1.2 message it is a problem for me. I have seen that a SOAP message created with BEA libraries contains two static variable: SOAP11 and SOAP12 and SOAP12 is set to 1.
    So I want to be sure that my application uses my libraries and not the BEA ones. I have tried to modify the classpath and even if I see my packages before the BEA packages, it always uses the BEA classes.
    If you think I should use the BEA libraries, I welcome any advice to send SOAP 1.1 messages instead of SOAP1.2 and to add a header with my own attribute.
    Thanks in advance for any clue :)
    Cheers,
    Fred

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • IMessage is working on iOS7 for my side of the conversation but the other persons is coming up as a normal message?

    So annoying! My imessages finally activates but when I have conversations with other imessage users, my side of the conversation is iMessage and theirs is normal message? How can I fix this?

    But on the other persons phone, all of their imessage conversations are as per usual except for ours?

  • SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)

    Hi,
    Curretly I am trying to test a Webservice on ECC 5.0, Oracle, Windows.
    Below is the error that I am facing.
    SOAP Runtime: SOAP Runtime exception: 111 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1
    SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)
    In dev_rfc0:
    ERROR 03:20:57: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->HANDLE
    STATUSCODE() Received return code 404 ( Not found )
    ERROR 03:20:57: SOAP Message CL_SOAP_MESSAGE->IF_SOAP_MESSAGE
    PART~INITFOR_DESERIALIZE() A SOAP Runtime Core Exception
    occurred in method XP_READ_TAG of class CL_SOAP_XP at position id
    1 with internal error id 111 and error text Unallowed RFC-XML Tag
    (SOAP_EINVALDOC) (fault location is 1 ).
    I have looked up on sdn, and also looked at note 919886.
    I have read several posts regarding creation of RFC Destination in sm59 of Type G, to get over this issue.
    But RFC Destination of type G is not available in ECC 5.0
    Is the error because of incorrect URL mentioned in logical port,
    I am unable to ping the host name mentioned in URL, looks like that machine is not in the network.
    does it mean the wsdl is not located at that particular host.
    Any suggestions would be greatly appreciated.
    Regards,
    Vishnu.

    Hi Anton,
    The complete error message in dev_rfc0:
    INFO 02:15:12: SOAP Transport Binding CL_SOAP_HTTP_TPBND_ROOT
    ->IF_SOAP_TRANSPORT_BINDING~SEND() Try to send message ( DEST =
    ,PATH = ,URL = http://hostname:portno/ ,SOAP Action =
    "ROI_R3_DF.roiSAPCreateOrder" )
    INFO 02:15:12: SOAP Transport Binding CL_SOAP_HTTP_TPBND_ROOT
    ->IF_SOAP_TRANSPORT_BINDING~SEND() Message sent
    INFO 02:15:12: SOAP Transport binding CL_SOAP_HTTP_TPBND_ROOT
    ->IF_SOAP_TRANSPORT_BINDING~RECEIVE() Try to receive message
    ERROR 02:15:12: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->HANDLE
    STATUSCODE() Received return code 404 ( Not found )
    ERROR 02:15:12: SOAP Message CL_SOAP_MESSAGE->IF_SOAP_MESSAGE
    PART~INITFOR_DESERIALIZE() A SOAP Runtime Core Exception
    occurred in method XP_READ_TAG of class CL_SOAP_XP at position id
    1 with internal error id 111 and error text Unallowed RFC-XML Tag
    (SOAP_EINVALDOC) (fault location is 1 ).
    After reading your post about the return code 404, I am in a dilemma whether, services in icman are unavailable or
    the services at the location of the wsdl in the other server.
    If you could clarify, it would be great.
    Thanks a lot.
    Vishnu.

  • SOAP Reciever Error message in Comp Moni

    Hello
    This is the first time i'm experiencing this error for SOAP receiver adapter. Attached the link for the error:
    [url]http://fb.esnips.com/doc/fe28959a-d718-4bd1-ba84-14e321fdabcf/soap-recv-error-message[url]
    Any inputs for troubleshooting this error?
    thkx
    Prabhu

    Hi Prabhu,
    Have you tried to trace your SOAP mesage?
    If not refer SAP note - 856597. It may help you..:)
    Q: How can I trace the whole message?
    A: If you have a third-party web service server or client and if it
    works with their own test tool but not with the SOAP adapter, you
    need to analyze the messages that are transported. Typically, this
    is done by either inseting a TCP gateway between the client and the
    server or non-invasively using some packet catching utility. You
    are free to use any tool but make sure that the tool can capture
    the messages as raw bytes. Some tools are known to store the
    captured messages as text and corrupt some characters.
    You can find a tool called TCPGateway in the attachment section of
    this note (stored in tcpgw.zip). Please unpack this zip file and
    open index.htm for more details
    Regards,
    Sunil

  • TS4268 My iphone will not send imessage for normal messages. please can someone help?

    My iphone will not send imessage for normal messages. please can someone help?

    Hi maccaman82,
    If you are having issues sending messages from your iPhone, you may find the following article helpful:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Regards,
    - Brenden

  • Why cant i use normal messaging on  my ipad mini

    I have recenly got an Ipad mini buy it will only let me message people who are on Imessage ,Why cant i use normal messaging on  my ipad mini ?

    Try resetting your Wi-Fi router. Turn off the power to the router. Leave it off for at least 30 seconds then power it back on. After the router has completed its startup routine and indicates a good connection to the internet, turn on your iPad and try to connect again.

  • SOAP receiver adapter message: PI payload in parameter or body

    Hi,
    We tried to send messages via the following way to an external partner: SAP --> IDoc > XI (7.1)> HTTP(s) --> external partner.
    We tried 2 techniques:
    1. using a HTTP receiver communication channel with HTTP destination (using certificate).
      As the path prefix in the destination, including parameters,  exceeds 256 characters, we had to search for another solution
    2. using the SOAP receiver communication channel with a target URL (https string) and indicator 'Do not use SOAP envelope' set   
      When sending the message, the body of the message, the IDoc XML payload doesn't seem to be read by the partner, probably related to the fact that they do not use the right software to do so, as decribed in forum: 
    SOAP receiver adapter error (SOAP receiver adapter error.)
    Is this the right interpretation and is there no other solution than try to append the payload to the parameterlist ?
    Regards,
    Jan Macken

    The partner found a way to read the body correctly

  • SOAP Receiver Response Message

    I have setup the following scenario:
    Create PO in EBP --> XI --> Webservice
    In the Repository I have set up both the outbound and inbound message interfaces as Synchronous. The interface mapping has been setup to map both the request and response messages.
    In the Directory I have set up the SOAP receiver adapter and the receiver/interface determination and receiver agreement for EBP as the sender system and the external webservice as the receiver party/service.
    When I create a purchase order in EBP the webservice is called successfully and the PO gets created on the target system. The webservice returns a response message which I am expecting to see via SXMB_MONI but is not currently showing!! Is there some Directory configuration that I am missing?
    Any pointers would be appreciated.
    Regards
    Mark Briggs

    Hi Mark,
    >>>>n the Repository I have set up both the outbound and inbound message interfaces as Synchronous
    is your scenario sync or async?
    do the ID config with ID wizzard if you're not sure
    if will guide you
    if you have a sync scenario you shoudl see and error
    if you have no response withint the timeout
    do you see that in the calling application or in the XI ?
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • IDoc to SOAP Receiver Fault Message Handling?

    Hi,
    I am working on IDoc to SOAP Scenario (IDoc -> PI -> SOAP). It is in async mode without BPM. This works fine as long as there is no error on the SOAP receiver side. How to handle the falut message raised by the SOAP receiver and send it back the SAP ECC.
    Do I need to use ALEAUD IDoc for this? If Yes, how to configure this to handle fault message? Is there any other way of doing it?
    Could you please give steps to handle the fault message?
    Thank you.
    Regards,
    Cdr.

    Have a look into the below threads -
    How to capture SOAPFault in an Async/Sync Scenario without BPM
    Acknowledgement Handling in IDoc to SOAP Scenario in PI 7.3

Maybe you are looking for