Solaris 10U1 needs to be to patched to SunUC 1.0.4 for local zones support

The version of Sun UC integrated into S10u1 does not support systems with local zones configured. This has since been fixed but you first need to patch the system to upgrade to Sun UC 1.0.4. This can be done on a SPARC system as follows:
$ smpatch download -i 121118-06
$ smpatch add -i 121118-06
For X86 the patch is 121119-06.

This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

Similar Messages

Network access from local zones on a Solaris 10 router

I'm kind of stuck at an interesting problem.
I have a Solaris 10u6 system which is itself a router between a number of networks.
It has several dozen routes to different networks via different next-hop gateways,
just one of which is a default route to the ISP to internet.
I thought of setting up local zones to securely run infrastructure services (BIND,
Squid, Mail relay) on this machine, with only a single dedicated public IP address
(from our delegated address space) per such zone. Zones use a shared-IP stack
on one of the machine's VLAN interfaces (the LAN part with public IP addresses).
The problem is - since this machine is the gateway for the subnet used for the
local zones, they don't inherit any default route. The one default we have to the
ISP is on another interface's subnet.
[root@ns8 /]# netstat -rn | grep default
[root@ns8 /]# netstat -rn | wc -l
50
On a side note, these zones do inherit dozens of other routes (50 above) with
next-hop routers not on the local zone's subnet - so these are also not accessible.
I think such useless routes should also be filtered away - as "mismatching" default
routes are.
Due to all this the zone has no networking outside its subnet/mask: it doesn't
even try to send anything, since there is not a single route with a matching next
hop router, i.e.
[root@ns8 /]# traceroute -nI 194.87.0.50
traceroute to 194.87.0.50 (194.87.0.50), 30 hops max, 40 byte packets
1 xx.yy.zz.8 0.102 ms !H 0.032 ms !H 0.027 ms !H
To reiterate, this setup is different from that of the numerous replays of "How to
set up internet for zones with virtual IP addresses?"
That recipe suggests to add a fake router and maintain its ARP address to be
that of the real default gateway, and set up NAT to rewrite private IP addresses
to the global zone's public IP. While I've also used the recipe a number of times,
it does not seem feasible in this router's case - there are too many next-hop
routers (and learned with a dynamic routing protocol), not just one default-gw.
I can of course go back to running services in the global zone and binding them
to these dedicated public IP addresses via configuration files - and this works
since the global zone has access to any needed routers having IP addresses
in relevant subnets - but I hoped to secure the system a bit more and separate
routing from infrastructure tasks...
So the question is: how can I set up networking for local zones in this case
when they are running on a router? Is it possible?
Thanks,
//Jim

You can set the Airport Extreme in "Bridge" mode, and then it will just extend the existing subnet.
Airport Utility -> Airport Extreme -> Internet -> Connection Sharing -> Off (bridge mode)

New Solaris Rookie needs help.

I am new with SUN Solaris, I mean I know nothing about it (I'm HP-UX SysAdmin). My boss gave me 3 additional Sun Solaris8 to manage. 2 are in production that I will not touch for now. 1 is test and learnig box - Sun E450. I re-installed Solaris8 OS on this test box. I get stuck with how do I find out the patches to install. I went to Sun web site and the list is too many patches, can't do one at a time. Is there a patch bundle for Solaris8 and how to install it? Thanks for your help.
Ben

Ah...okay...so...
http://patches.sun.com/clusters/9_Recommended.README
For example...has instructions on how to install the S9 recommended cluster.
So...what you need to do is go to sunsolve.sun.com you'll find links to get patches. You can either download single patches or patch clusters (basically a giant group of patches that fix a whole bunch of stuff).

Do I need to update DST Patch in both locations.

Hi,
I have Solaris 10 installed on SPARc machine which is having Java 1.5 version buy defauly and doesnot reqiuire patch update as I have understand.
But my application runs on Java 1.4.05 at present and java home is a custom path different from default java that comes with OS.
Do I need to patch/replace the version 1.4.05 with something appropreate or is it sufficient if I just patch OS?
Thanks in advance for the help.
Regards,
Ramesh.

Tesserax,
Thank you for the suggestions. I tried first setting the radio mode to 802.11b/g compatible using the Option key hint that you supplied, but I got the same error message when I tried to join the network from my older Mac. (I apologize for saying in error that it was running 10.5.8, it was actually running 10.4.11--the last version that still supported Classic--and is a G4 PPC machine.)
The attempt to login to the network from the PPC machine gave me the standard log-in prompt, but I noticed that it asked for the WAP password, and my two other machines--both Intel MacBooks--get asked for the WAP2 password. The first time I noticed this I was still thinking the "error in trying to join the network" was a function of the 802.11n setup.
When your first suggestion didn't work, I reset the base station back to the original 802.11n (b & g compatible) but got the same error message--asking for a WAP password--so I went back into the setup, and selected the WAP/WAP2 Personal menu selection, restarted the base station, and was able to successfully join the network!
Your tip led me to the right place to fix my problem, Thank You,
Bill Pratt

What driver or software patches do i need to install in my windows 7 laptop, in order for the laptop to capture Bluetooth messages, which is possible with window 8?

Hi,
i am connecting a Bluetooth device to my laptop. I notice that Message Analyzer could capture Bluetooth messages only if I am using windows 8? I am using window 7. What driver or software patches do i need to install in my windows 7 laptop, in order for
the laptop to capture Bluetooth messages, which is possible with window 8?
Also, i notice that using window 8, i am able to capture Bluetooth message but i am not able to display wireless perfromance statistics such as signal strength, throughput, etc? Is there a way for me to get such information.
Please help.

If you look at the link you sent me:Default Trace Scenarios
http://msdn.microsoft.com/en-us/library/jj659262.aspx
"Windows 8 Bluetooth (Windows 8/Windows Server 2012 or later)
Troubleshoot Bluetooth issues"
So what about Windows 8 earlier? Not supported?
My question: What driver or software patches do i need to install in my windows 7 laptop, in order for the laptop to capture Bluetooth messages, which is possible with window 8?

Need to upgrade BI patch update..

Dear friends,
last week we have successfully upgraded our CRM patch upgradation from 5 to 7.0
now as a BI consultant i need to suggest whether we have to upgrade the BI patch upgradation?
right now BI version is 7.0.1 need to updgrade latest patch , so kindly assist me on this
whether is it necessary to upgrade the patch updation ?
if i update this patch upgradation in BI , whether we will have any run time errors ?
is there my process chain will get disturb ?
i need to take care any errors? pls help me friends...
so that i can ask my basis consultant help to complete this task..
thanks in advance...
by
anand

Hi Team,
Thanks for the reply.
This is the first time i am applying the patches.Request the team to reply with patience.
I have doubt which patch should i apply all this patches or any one of the patch on the database side.
Request you to help me.
Oracle Database home Database 11.1.0.7 CPU Patch 14038803, or CVE-2012-1737, CVE-2012-1745, CVE-2012- Database 11.1.0.7.12 PSU Patch 13923474, or CVE-2012-1746 (Windows Only),
Microsoft Windows (32-Bit) Bundle Patch 14109867, or CVE-2012-1747 (Windows Only)
Microsoft Windows x64 (64-Bit) Bundle Patch 14109868
Oracle Database home Patch 13705478 Released April 2012 OC4J 10.1.3.3 one-off patch
Oracle CRS home CRS 11.1.0.7.7 PSU Patch 11724953 Released April 2011 Non-security content only
Oracle Database home Patch 9288120 Released April 2011 Database UIX
Oracle Database home Patch 10073948 Released April 2011 Enterprise Manager Database Control UIX
Oracle Database home Patch 11738232 Released April 2011 Warehouse Builder
And on application which patch should i download request to team to help me.I request you to tell me the patch numbers which i should download and apply.please help me.this is the first time i am applying the patches.
Thanks,
Kamal

Need help with Critical Patch Update (CPU)

Dear experts, can someone please help me with below 2 questions :
1. Is there a way that I can find out what is included in the CPU's for application and database? I tried going through readme files but they do not list details of what part of the application will be impacted by these patches. The reason I need this information so that we can narrow our scope for testing. Otherwise we have to test all the modules and that is a pain :-(
2. Can we only apply either database or application CPU's or do we always need to apply them together?
Any help will be greatly appreciated .

1. Is there a way that I can find out what is included in the CPU's for application and database? I tried going through readme files but they do not list details of what part of the application will be impacted by these patches. The reason I need this information so that we can narrow our scope for testing. Otherwise we have to test all the modules and that is a pain :-(The patch README file should tell you what fixes/bugs are included in the patch. If there is no enough information in the README files, then search MOS website and go through the docs. If you still need more details then you may need to log a SR.
2. Can we only apply either database or application CPU's or do we always need to apply them together?You do not have to apply the patches on all tier nodes, and you can apply them either on the database tier node then on the application tier node (or vice versa).
Thanks,
Hussein

Patch version is R12.IBY.B.2 i need to apply this Patch 11712930:R12.IBY.B

Hi All,
I have to apply the patch Patch 11712930:R12.IBY.B where i have the version of IBY patchset level R12.IBY.B.2.
Do we need to apply the patch or is it consolidated with R12.IBY.B.2
Following this document for the issue *(Performance: Create Settlement Batches Program Running For Several Hours [ID 1250464.1])*
Regards

Hi;
Please see
How to check if certain Oracle Applications product/module is implemented? [ID 443699.1]
How to check which Techstack patchsets have been applied [ID 390864.1]
How to check if a certain Patch was applied to Oracle Applications instance? [ID 443761.1]
Regard
Helios

I need to download Oracle 8i Release 2 (8.1.6) for Solaris (Intel)

I need to download Oracle 8i Release 2 (8.1.6) for Solaris (Intel) but haven't found it in the web page.
Does someone knows where to get it.
Thanks.

This download is not available on the OTN site. We recommend that if you live within the United States or Canada to check with the Oracle Store for product availability:http://otn.oracle.com/software/store/discount.html
Best Regards, OTN Team

Need a system/security patch

Hu all my db version is 11.1.0.6 and os is server 2003 64 bit i need all security/system patches so my db will be upto data. please share the patch name if anyone have any idea
Thank you.

Hi;
Hu all my db version is 11.1.0.6 and os is server 2003 64 bit i need all security/system patches so my db will be upto data. please share the patch name if anyone have any idea1. Start to make plan to move your database 11.2.0.x level
2. All related patch number(latest one) can be found at:
Quick Reference to Patchset Patch Numbers [ID 753736.1]
3. All related recomended patch can be found at:
Oracle Recommended Patches -- Oracle Database [ID 756671.1]
4. All windows related patch can be found at:
Oracle Database Server and Networking Patches for Microsoft Platforms [ID 161549.1]
NOTE:430449.1 - How to find DB Patches for the Microsoft Windows platforms My Oracle Support
11.2.0.x Oracle Database and Networking Patches for Microsoft Platforms [ID 1114533.1]
5. All security related patch can be found at:
Critical Patch Updates, Security Alerts and Third Party Bulletin
http://www.oracle.com/technetwork/topics/security/alerts-086861.html
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Local zones during global shutdown in Solaris 10

Hello,
I am trying to determine if issuing a shutdown command from the global zone, e.g. shutdown -g0 -i5 -y performs graceful shutdowns on any running local zones, or does it issue a halt to the local zones without running shutdown scripts in them. Searching the Solaris zones forum brings up some older discussions (pre 2010) where users reported a halt was done, but the expectation is this would be changed in later Solaris 10 patches or revisions. Has this ever been addressed? Is there a way to determine if a local zone has been halted or shutdown? What is the recommended way to perform a shutdown of a global zone, when local zones are running?
Thanks,

The global zone will run a "svcadm disable zones" for each zones and this corresponds to a "zoneadm shutdown" or "zoneadm halt". Both zoneadm command will use a "init 0" in each zone.
If you have a zone that requires a shutdown script to stopping for example a database gracefully, then you should run the shutdown inside each zone directly.

Sun Live Upgrade with local zones Solaris 10

I have M800 server running global root (/) fs on local disk and running 6 local zones on another local disk. I am running solaris 5.10 8/07.
I used live upgrade to patch the system and created new BE (lucreate). Both root fs are mirror as RAID-1.
When I ran lucreate, it copies all 6 local zones root fs to the global root fs and failed no enogh space.
What is the best procedure to use lu with local zones.
Note: I used lu with global zone only, and worked without any problem.
regards,

I have been trying to use luupgrade for Solaris10 on Sparc, 05/09 -> 10/09.
lucreate is successful, but luactivate directs me to install 'the rest of the packages' in order to make the BE stable enough to activate. I try to find the packages indicated , but find only "virtual packages" which contain only pkgmap.
I installed upgrade 6 on a spare disk to make sure my u7 installation was not defective, but got similar results.
I got beyond luactivate on x86 a while ago, but had other snags which I left unattended.

Oracle Patch set 10.2.0.4 for HP-UX PA-RISK

Dear all,
Can anyone please tell me the path to download the Oracle Patch ser 10.2.0.4 for HP-UX PA_RISK?
I need to upgrade our DB level - currently Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
For upgrade to Oracle 11g I need to be on minimum 10.2.0.4. I tried to find the patchset files on :
Software downloads ->Database patches -> Oracle ->Oracle 64-bit ->Oracle 10.2.0. 64-bit Here I can't find 10.2.0.4
On the other path Software downloads ->Database patches -> Oracle ->Oracle 10.2.0.4 -> Database RDBMS ->HP-UX PA-RISC (64-bit) I can't find the patch set only bundle patch 10.2.0.4.6
Please help.
Thanks in advance.
BR,
Ruzica

> First we will do SAP systems merge and when there will be only one DB instance we'll do Oracle upgrade to 11g
And why do you think a merge of application data is dependent on the Oracle patchlevel? I mean those patchlevel are on a technical level, even if you'd use SQL on the lower level it works you don't merge "binaries" but database content, right?
http://service.sap.com/swcenter-3pmain
--> Oracle
--> Oracle 10.2.0.4
--> Database RDBMS
--> HP-UX PA-RISC (64-bit)
There you can download the patchset.
BTW: this is also mentioned in "1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4" )
Markus

HT204406 I am having a very difficult time with accessing my music from the cloud. I need to have itunes open on my laptop in order for it to work. And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out.

I am having a very difficult time with accessing my music from the cloud. I need to have itunes open on my laptop in order for it to work. And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out. Help!!!

Where are iTunes files located?
No, I do not mean just the music. Copying just the media/music files or the media folder creates problems.

Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

Hi there
I'll pass your details to our Russian team and they'll contact you to assist further.
Kind regards
Bev

Solaris 10U1 needs to be to patched to SunUC 1.0.4 for local zones support

Similar Messages

Maybe you are looking for