Solstice Backup for Intel, Does it Exist?

I have been trying to find the packages SUNWsbu* for Solstice Backup on all the media I have for the Intel platform and can't find it. Does anyone know on what CD-ROM it can be found and the package name, if different from above? Thank you in advance.

I don't know what Sun's storage division are playing at, but you can
purchase the x86 version at store.sun.com->storage->data management
However I note from the product descriptions that this is for Soalris 2.4 and 2.5.1 (both obsolete versions) - I hope someone can tell you if this runs on S8!!!

Similar Messages

Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. Bo

Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

Follow-up posting flow type Credit for 870 does not exist

Hi SAP,
I am having a problem when try to recalculate cash flow in FO38. System popup error Message no. 62179 (Follow-up posting flow type Credit for 870 does not exist). The error details is like this:
Diagnosis
You have changed the data in such a way that follow-up postings have resulted.
No follow-up posting flow type has been defined for Credit for the flow type 870. A proposed flow type for flow type 3NCH has not been defined either.
System Response
Processing cannot be continued without the flow type.
Procedure
Contact your system administrator.
Procedure for the system administrator
Check and correct the settings for the reference flow type for follow-up postings in Customizing as required.
Is there any setting in configuration Txn SPRO should i do? Will give points for those who help me out this problem.
TQ
Regards,
Nazrul

Hi Nazrul,
yes, there are reference flow types missing for follow-up postings. Follow-up postings are created if condition amounts have been changed and that affects already posted items in the cash flow. In this case follow-up postings are generated. For the follow-up postings the system uses special flow types that have to be maintained in customizing.
SPRO - Real Estate - Conditions, Flow Types, Account Determination - Maintain Flow Types - Assign Reference Flow Types
Relevant relationship keys are:
2 IS-RE: Follow-up postings due to condition incr.
32 IS-RE: Follow-up posting due to condition reduct.
You have to assign reference flow types for these relationship keys.
This should help.
Regards, Franz

[SOLVED] database file for multilib does not exist

Hey guys I ran into a problem today when I tried to install the proper packages I needed to use my wifi card. However when I tried to install it it gives me the error "database file for multilib does not exist" I can t seem to find out why I even tried chrooting into it and installing it that way with no luck. The package I tried to install was "pacman -S wireless_tools netcfg" thanks for the help guys you've been great.
Last edited by bdawg (2012-09-18 22:57:17)

bdawg wrote:
Ok so the whole output is as follows:
Warning: database file for 'multilib' does not exist
Error: failed to prepare transaction (could not find database)
And my Pacman.conf is blank
pacman.conf and Pacman.conf (with capital 'P') are two different files. Double-check this.
Are you running a 64-bit system?
Your /etc/pacman.conf should look like this: https://projects.archlinux.org/pacman.g … an.conf.in but with some repositories configured: https://wiki.archlinux.org/index.php/Pa … positories
Last edited by karol (2012-09-18 22:13:59)

Endpoint Protection error: The source folder for content does not exist.

I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
I just recently started seeing that my Endpoint Deployment Package has Failed. I click on "Content Status" and select the Endpoint package (which again shows Failed). I click on "View Status" and I get this
message in the "Error" tab:
The source folder for content does not exist.
The Asset Details point to the exact location that does not exist:
The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist.
I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
shared and is populated with a lot of other folders.
Is this possibly just a bad update file? Should I manually create that sub-folder that it says is missing?
Any help would be great! Thanks!

Thanks for the quick reply, Torsten. (I often forget which logs to check for certain things).
There are six lines (3 errors -- in italics below) in the log around the same time frame. They read:
The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM
5920 (0x1720)
STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
Failed to take snapshot of one or more contents in package PDC00063   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:46 AM   5920 (0x1720)
Failed to process package PDC00063 after 33 retries, will retry 67 more times   SMS_DISTRIBUTION_MANAGER   5/27/2014 11:54:47 AM   5920 (0x1720)

Getting 'taglib directive for "f" does not exist or TLD is not found'

Hi,
I'm using Eclipse 3.4 and when I open my JSF page in Eclipse, I'm getting red "x"'s next to my JSF directives. For example,
<f:view>
has a red "x" along the left margin and when I roll over it, it gives me the error, 'taglib directive for "f" does not exist or TLD is not found.' This is odd because I have the appropriate directives, including
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
at the top of my page. Strangely, the "<%@" portion appears in red. Does anyone know how I can get Eclipse to recognize the listed directives?
Thanks, - Dave

Hi, I went to the link
http://java.sun.com/javaee/javaserverfaces/download.html
but following the steps only got to a place where I could download JavaServer(TM) Faces Specification Maintainance Release -- jsf-1_1-mr-spec.pdf. I did not see anywhere on here where I could download the actual jsf-api.jar or jsf-impl.jar files.
Any further clarification you can provide is appreciated, - Dave

Maintenance Dialog for V_T7INDA_OFFGRP does not exist

Hi Friends,
I have tried to enter the values in the view V_T7INDA_OFFGRP, but I am
getting a message, that 'Maintenance Dialog for V_T7INDA_OFFGRP does
not exist'.
When I went to se54 to create the Maintenance Dialog, I am not able to
see the View V_T7INDA_OFFGRP in the funtion group HRPBSINDA_DDIC.
Can you please help me how I can creat the Maintenance Dialog for this
view.
Thanks,
Suresh Kumar Paturi

Procedure compiles OK if I replace
SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
by
pseudoRandomSeed := DBMS_UTILITY.GET_TIME;
I still would like to understand the reason of the error as why the procedure cannot compile with SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
Thanks

Idoc INVOIC error Baseline date for payment does not exist

Dear All,
I am facing the following error message when processing an idoc to do an MM invoice reception (operation similar to a MIRO).
The payment term is correctly maintained in the purchase order.
Idoc message type INVOIC MM.
Baseline date for payment does not exist
Message no. M8356
Diagnosis
You have tried to post a document without a baseline date for payment.
The system will not allow you to do this.
Check the purchase order. No terms of payment have been entered in the document header or no suggestion has been defined in Customizing for the baseline date for payment for the terms of payment entered.
If you get the error message during automatic settlement of planned delivery costs, maintain the term of payment in the master record (Payment Transactions, Financial Accounting) for the freight vendor or use the Business Add-In MRM_ERS_HDAT_MODIFY to determine the term of payment.
Regards
Arnaud

Hello,
Date for starting the calculation of the baseline date is indeed managed in the TC OME2 (document date, posting date, etc..).
In my project, there is already some companies using payment term N60N, so it should be possible to continue using it.
I solved this issue by putting a payment term in the vendors master data (company & purchasing views) and also in the customers views (company / sales orga) otherwise the structure of the idoc is different.
Thanks anyway for your input.
Keep in touch.
Regards
Arnaud

PO/ Invoice created for supplier does not exist for particular company code

Hi Gurus,
We have a case where PO created w.r.t supplier X does not exist for any company code A. Also Invoice is generated.
As per my analysis:
1. Purchasing organization is assigned to the particular plant and Plant does assigned to company code. This purchasing organization does not assigned to any company code and kind of centrally allowed to any company code based on above link.
2. Supplier X does exist for the purchasing organization. And in Partner function-For PI (Invoice presented) partner function, it is defined for another supplier Y. This Y supplier does exist for company code A and might be the reason, it is allowing creating PO and Invoice.
Please correct me, if I am wrong or If there will be any other reason for the same. Just for your information, there is no Info record exist for this PO as it is created for service without any material number.
Thanks for your response.
Best regards,
Karun Kumar

You can create vendor only with reference to purchase organization and withoout company code.
for this vendor, you can create PO and MIGO and system will allow but when you try to post the invoice system will prompt you to enter different invoice party. if you dont enter different invoice party, system will throw an error message "vendor is not defined in XXXX.
So in your case, your analysis is correct.

Control indicators for controlling does not exist

Hi,
While doing g/l posting I got this error "Control indicators for controlling area----does not exist"
Please help me with the solution.
Regards,
Jyoti

your config is missing go to tcdoe OKKP, selecet your controling area and then select the tab activate components and make sure they are active and the boxes are ticked
Points will be appreciated
Regards,
Zaid Azam

Customizing for Employee Does Not Exist

Whilst trying to create a Leave Request in ESS, the following warning message appears "customizing for employee 01000000 does not exist".
Does anyone know why this is happening?
Thanks
MN

Please, could you tell me how did you resolve it??
Thank you

[SOLVED] kms for intel does not recognize hdmi/displayport

Hi,
I updated yesterday my laptop, which has a intel gpu coming with the Core-I5 chipset (not the HD one).
With the new kernel 3.6.10, it does not detect any hdmi/displayport ouput anymore. VGA and LVDS are just fine and also the modes which are detected are correct.
First difference is also, that when the external hdmi display is connected also during startup, usually the framebuffer is visible on both LVDS and HDMI but not anymore.
The log output does not look too bad:
$> dmesg | grep fb
[ 0.511013] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.511015] vesafb: scrolling: redraw
[ 0.511016] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.511618] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011000000, using 4032k, total 4032k
[ 0.797827] fb0: VESA VGA frame buffer device
[ 3.094692] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.878516] fbcon: inteldrmfb (fb0) is primary device
[ 4.049234] fb0: inteldrmfb frame buffer device
$> xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
LVDS1 connected (normal left inverted right x axis y axis)
1280x800 60.0 + 50.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
1920x1080 60.0*+
1680x1050 60.0
Any help would be greatly appreciated, also please let me know if you need more info.
SOLVED: This is now solved with kernel 3.6.11
Thanks,
Johannes
Last edited by the_hippie (2013-01-07 19:11:20)

Hi,
I updated yesterday my laptop, which has a intel gpu coming with the Core-I5 chipset (not the HD one).
With the new kernel 3.6.10, it does not detect any hdmi/displayport ouput anymore. VGA and LVDS are just fine and also the modes which are detected are correct.
First difference is also, that when the external hdmi display is connected also during startup, usually the framebuffer is visible on both LVDS and HDMI but not anymore.
The log output does not look too bad:
$> dmesg | grep fb
[ 0.511013] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.511015] vesafb: scrolling: redraw
[ 0.511016] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.511618] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011000000, using 4032k, total 4032k
[ 0.797827] fb0: VESA VGA frame buffer device
[ 3.094692] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.878516] fbcon: inteldrmfb (fb0) is primary device
[ 4.049234] fb0: inteldrmfb frame buffer device
$> xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
LVDS1 connected (normal left inverted right x axis y axis)
1280x800 60.0 + 50.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
1920x1080 60.0*+
1680x1050 60.0
Any help would be greatly appreciated, also please let me know if you need more info.
SOLVED: This is now solved with kernel 3.6.11
Thanks,
Johannes
Last edited by the_hippie (2013-01-07 19:11:20)

ICF SERVICE NODE FOR THE APPLICATION DOES NOT EXIST.

Hi All:
i am getting the following error when trying to execute my applications in abap webdynpro.
The following error text was processed in the system BIS : WebDynpro Exception: ICF service node for application does not exist
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
can anybody help me out.
relevant answers will be awarded...
Regards:
Arun

Hi,
see the information on ICF service nodes <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">here</a> and also take a look at SAP notes 517484 and 1009930 and 1008689
Regards, Heidi
For information on creating services (if they are not created automatically), see <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/78/9852aec06b11d4ad310000e83539c3/frameset.htm">here</a>
Message was edited by:
Heidi von Geisau

Solstice Backup and Solaris 8 Upgrade

I currently have Solstice Backup v5.0.1, patched with 105658-05 on Solaris 2.6. When I upgrade to Solaris 8, do I reinstall Solstice Backup v5.0.1 or will I have to upgrade it too?
Thanks

Minimum release of Solstice Backup for Solaris 8 is 5.5.1. Latest is 6.1.

Upgrade to Solaris 8 - Solstice Backup

Hi,
I currently have Solstice Backup v5.0.1, patched with 105658-05 on Solaris 2.6. When I upgrade to Solaris 8 can I reinstall Solstice Backup v5.0.1 or will I have to upgrade it too?
Thanks
D

Minimum release of Solstice Backup for Solaris 8 is 5.5.1. Latest is 6.1.

Solstice Backup for Intel, Does it Exist?

Similar Messages

Maybe you are looking for