[Solved]After upgrade: Random system stalls, invisible text. drm/i915?

Hi,
Short version: I think I have a problem with drm and my graphic card drivers after an update, but I'm not quite sure what to do about it.
Longer version: ever since an update 2 days ago, I have a range of system problems.
Most notably, the system stalls or hangs for between 2 and 10 seconds every few minutes. This may happen during any kind of activity - viewing pdfs (zathura or acroread), working in the terminal (lilyterm), web browsing (firefox) or reading/writing email (thunderbird). It also very often stalls during change of awesome's tags, but not every time (only every third or so).
Then, similar to this recently necromanced thread ( https://bbs.archlinux.org/viewtopic.php?id=135259 ), I have random letters disappearing in thunderbird, but also random paragraphs disappearing in firefox, see screenshot here: http://imgur.com/RhOhL3a
With the help of dmesg I discovered errors like
[15170.335247] [drm] stuck on render ring
[15170.335310] [drm:i915_set_reset_status] *ERROR* render ring hung inside bo (0xebf0000 ctx 0) at 0xec0a050
popping up a lot, and google-found a few related threads or bug reports ( https://bugs.archlinux.org/task/34611 ,  https://bbs.archlinux.org/viewtopic.php?id=160186 ,  https://bbs.archlinux.org/viewtopic.php?pid=1251547 ). But then my troubles start, because I don't know just exactly what to do with this information. Some seem to speak of downgrading, but downgrade what exactly? Some say this is fixed/solved, but in what sense (reported upstream, fixed upstream, fixed in arch) and then what does is mean that I still get such errors? Should I re-report them, or what should I do to fix? Some system info below.
Thanks for any pointers!
$ uname -a
Linux hostname 3.12.9-1-ARCH #1 SMP PREEMPT Sun Jan 26 09:01:37 CET 2014 x86_64 GNU/Linux
$ Xorg -version
X.Org X Server 1.15.0
$lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07)
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.9-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jan 26 09:01:37 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37e98755-f4db-4377-8615-60068771034d rw quiet
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd6a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd6a1000-0x00000000bd6a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd6a7000-0x00000000bd7b6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd7b7000-0x00000000bd80efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd80f000-0x00000000bd8c6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd8c7000-0x00000000bd8d1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bd8d2000-0x00000000bd8d4fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bd8d5000-0x00000000bd8d8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd8d9000-0x00000000bd8dcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bd8dd000-0x00000000bd8dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd8e0000-0x00000000bd906fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bd907000-0x00000000bd907fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bd908000-0x00000000bdb0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdb0f000-0x00000000bdb9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdb9f000-0x00000000bdbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdbff000-0x00000000bdbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdc00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: LENOVO 2767WSD/2767WSD, BIOS 7UET70WW (3.00 ) 04/17/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 13C000000 mask FFC000000 uncachable
[ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbdc00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f64d0-0x000f64df] mapped at [ffff8800000f64d0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13be00000-0x13bffffff]
[ 0.000000] [mem 0x13be00000-0x13bffffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x138000000-0x13bdfffff]
[ 0.000000] [mem 0x138000000-0x13bdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x137ffffff]
[ 0.000000] [mem 0x100000000-0x137ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbd6a0fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbd5fffff] page 2M
[ 0.000000] [mem 0xbd600000-0xbd6a0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbd6a7000-0xbd7b6fff]
[ 0.000000] [mem 0xbd6a7000-0xbd7b6fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbd80f000-0xbd8c6fff]
[ 0.000000] [mem 0xbd80f000-0xbd8c6fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbdbff000-0xbdbfffff]
[ 0.000000] [mem 0xbdbff000-0xbdbfffff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37998000-0x37cc3fff]
[ 0.000000] ACPI: RSDP 00000000000f6490 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bdb4a35d 0008C (v01 LENOVO TP-7U 00003000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bdb4a500 000F4 (v03 LENOVO TP-7U 00003000 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bdb4a8db 0F48F (v01 LENOVO TP-7U 00003000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bdb8e000 00040
[ 0.000000] ACPI: SSDT 00000000bdb4a6b4 00227 (v01 LENOVO TP-7U 00003000 MSFT 03000000)
[ 0.000000] ACPI: ECDT 00000000bdb59d6a 00052 (v01 LENOVO TP-7U 00003000 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bdb59dbc 00078 (v01 LENOVO TP-7U 00003000 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bdb59e34 0003C (v01 LENOVO TP-7U 00003000 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bdb59e70 00038 (v01 LENOVO TP-7U 00003000 LNVO 00000001)
[ 0.000000] ACPI: BOOT 00000000bdb59f38 00028 (v01 LENOVO TP-7U 00003000 LTP 00000001)
[ 0.000000] ACPI: ASF! 00000000bdb59f60 000A0 (v16 LENOVO TP-7U 00003000 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bdb8d213 0054F (v01 LENOVO TP-7U 00003000 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bd907000 00032 (v00 00000000 00000000)
[ 0.000000] ACPI: SSDT 00000000bd8d4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bd8d3000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bd8d2000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T400
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13bffffff]
[ 0.000000] NODE_DATA [mem 0x13bff8000-0x13bffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880137600000-ffff88013b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbd6a0fff]
[ 0.000000] node 0: [mem 0xbd6a7000-0xbd7b6fff]
[ 0.000000] node 0: [mem 0xbd80f000-0xbd8c6fff]
[ 0.000000] node 0: [mem 0xbdbff000-0xbdbfffff]
[ 0.000000] node 0: [mem 0x100000000-0x13bffffff]
[ 0.000000] On node 0 totalpages: 1021959
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12066 pages used for memmap
[ 0.000000] DMA32 zone: 772202 pages, LIFO batch:31
[ 0.000000] Normal zone: 3840 pages used for memmap
[ 0.000000] Normal zone: 245760 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd6a1000-0xbd6a6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd7b7000-0xbd80efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd8c7000-0xbd8d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd8d2000-0xbd8d4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd8d5000-0xbd8d8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd8d9000-0xbd8dcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd8dd000-0xbd8dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd8e0000-0xbd906fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd907000-0xbd907fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd908000-0xbdb0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdb0f000-0xbdb9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdb9f000-0xbdbfefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdc00000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013bc00000 s86464 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1005968
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37e98755-f4db-4377-8615-60068771034d rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3940680K/4087836K available (5119K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 147156K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2527.053 MHz processor
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.69 BogoMIPS (lpj=8423510)
[ 0.003341] pid_max: default: 32768 minimum: 301
[ 0.003375] Security Framework initialized
[ 0.003387] AppArmor: AppArmor disabled by boot time parameter
[ 0.003388] Yama: becoming mindful.
[ 0.003735] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007112] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008042] Mount-cache hash table entries: 256
[ 0.008292] Initializing cgroup subsys memory
[ 0.008312] Initializing cgroup subsys devices
[ 0.008315] Initializing cgroup subsys freezer
[ 0.008317] Initializing cgroup subsys net_cls
[ 0.008319] Initializing cgroup subsys blkio
[ 0.008341] Disabled fast string operations
[ 0.008346] CPU: Physical Processor ID: 0
[ 0.008347] CPU: Processor Core ID: 0
[ 0.008349] mce: CPU supports 6 MCE banks
[ 0.008357] CPU0: Thermal monitoring enabled (TM2)
[ 0.008365] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.008437] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.009258] ACPI: Core revision 20130725
[ 0.015569] ACPI: All ACPI Tables successfully acquired
[ 0.016678] ftrace: allocating 20320 entries in 80 pages
[ 0.027168] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061017] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz (fam: 06, model: 17, stepping: 0a)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.083392] smpboot: Booting Node 0, Processors # 1 OK
[ 0.006666] Disabled fast string operations
[ 0.096626] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096639] Brought up 2 CPUs
[ 0.096642] smpboot: Total of 2 processors activated (10112.38 BogoMIPS)
[ 0.098382] devtmpfs: initialized
[ 0.105175] PM: Registering ACPI NVS region [mem 0xbd8c7000-0xbd8d1fff] (45056 bytes)
[ 0.105175] PM: Registering ACPI NVS region [mem 0xbd8d9000-0xbd8dcfff] (16384 bytes)
[ 0.105175] PM: Registering ACPI NVS region [mem 0xbd8e0000-0xbd906fff] (159744 bytes)
[ 0.105175] PM: Registering ACPI NVS region [mem 0xbdb0f000-0xbdb9efff] (589824 bytes)
[ 0.105175] RTC time: 9:58:53, date: 01/27/14
[ 0.105175] NET: Registered protocol family 16
[ 0.105175] cpuidle: using governor ladder
[ 0.105175] cpuidle: using governor menu
[ 0.105175] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.105175] ACPI: bus type PCI registered
[ 0.105175] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.105175] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.105175] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.110884] PCI: Using configuration type 1 for base access
[ 0.111004] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.111005] mtrr: probably your BIOS does not setup all CPUs.
[ 0.111006] mtrr: corrected configuration.
[ 0.113386] bio: create slab <bio-0> at 0
[ 0.113399] ACPI: Added _OSI(Module Device)
[ 0.113399] ACPI: Added _OSI(Processor Device)
[ 0.113399] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.113399] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.113399] ACPI: Added _OSI(Linux)
[ 0.114883] ACPI: EC: EC description table is found, configuring boot EC
[ 0.120617] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.136948] ACPI: SSDT 00000000bd8d7c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.137309] ACPI: Dynamic OEM Table Load:
[ 0.137311] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.137428] ACPI: SSDT 00000000bd8d5020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.137809] ACPI: Dynamic OEM Table Load:
[ 0.137811] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.156862] ACPI: SSDT 00000000bd8d6ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.157236] ACPI: Dynamic OEM Table Load:
[ 0.157238] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.163404] ACPI: SSDT 00000000bd8d6f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.166956] ACPI: Dynamic OEM Table Load:
[ 0.166958] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.176786] ACPI: Interpreter enabled
[ 0.176792] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.176796] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.176808] ACPI: (supports S0 S3 S4 S5)
[ 0.176810] ACPI: Using IOAPIC for interrupt routing
[ 0.176832] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.180490] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.200183] ACPI: Power Resource [PUBS] (on)
[ 0.204053] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204145] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204234] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204323] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204413] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204501] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204593] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204682] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204732] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.204914] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.205251] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.205280] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.205450] PCI host bridge to bus 0000:00
[ 0.205453] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.205455] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.205457] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.205459] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.205461] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.205462] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.205464] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.205466] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.205474] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.205493] DMAR: Forcing write-buffer flush capability
[ 0.205494] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.205570] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.205582] pci 0000:00:02.0: reg 0x10: [mem 0xfa000000-0xfa3fffff 64bit]
[ 0.205589] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.205594] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.205673] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.205683] pci 0000:00:02.1: reg 0x10: [mem 0xf4100000-0xf41fffff 64bit]
[ 0.205773] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
[ 0.205788] pci 0000:00:03.0: reg 0x10: [mem 0xfa626800-0xfa62680f 64bit]
[ 0.205837] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.205906] pci 0000:00:03.2: [8086:2a46] type 00 class 0x010185
[ 0.205919] pci 0000:00:03.2: reg 0x10: [io 0x1828-0x182f]
[ 0.205926] pci 0000:00:03.2: reg 0x14: [io 0x180c-0x180f]
[ 0.205932] pci 0000:00:03.2: reg 0x18: [io 0x1820-0x1827]
[ 0.205939] pci 0000:00:03.2: reg 0x1c: [io 0x1808-0x180b]
[ 0.205945] pci 0000:00:03.2: reg 0x20: [io 0x1810-0x181f]
[ 0.206039] pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002
[ 0.206052] pci 0000:00:03.3: reg 0x10: [io 0x1830-0x1837]
[ 0.206059] pci 0000:00:03.3: reg 0x14: [mem 0xfa424000-0xfa424fff]
[ 0.206206] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.206230] pci 0000:00:19.0: reg 0x10: [mem 0xfa400000-0xfa41ffff]
[ 0.206241] pci 0000:00:19.0: reg 0x14: [mem 0xfa425000-0xfa425fff]
[ 0.206252] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
[ 0.206338] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.206385] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.206423] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.206478] pci 0000:00:1a.0: reg 0x20: [io 0x1860-0x187f]
[ 0.206577] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.206692] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.206747] pci 0000:00:1a.1: reg 0x20: [io 0x1880-0x189f]
[ 0.206860] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.206915] pci 0000:00:1a.2: reg 0x20: [io 0x18a0-0x18bf]
[ 0.207011] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.207061] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.207086] pci 0000:00:1a.7: reg 0x10: [mem 0xfa626c00-0xfa626fff]
[ 0.207194] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.207238] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.207283] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.207303] pci 0000:00:1b.0: reg 0x10: [mem 0xfa420000-0xfa423fff 64bit]
[ 0.207398] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.207451] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.207492] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.207592] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.207640] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.207679] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.207778] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.207826] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.207874] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.207929] pci 0000:00:1d.0: reg 0x20: [io 0x18c0-0x18df]
[ 0.208024] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.208063] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.208118] pci 0000:00:1d.1: reg 0x20: [io 0x18e0-0x18ff]
[ 0.208231] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.208286] pci 0000:00:1d.2: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.208410] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.208436] pci 0000:00:1d.7: reg 0x10: [mem 0xfa627000-0xfa6273ff]
[ 0.208543] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.208588] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.208629] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.208735] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.208776] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.208987] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.209014] pci 0000:00:1f.2: reg 0x10: [io 0x1c48-0x1c4f]
[ 0.209025] pci 0000:00:1f.2: reg 0x14: [io 0x183c-0x183f]
[ 0.209036] pci 0000:00:1f.2: reg 0x18: [io 0x1c40-0x1c47]
[ 0.209047] pci 0000:00:1f.2: reg 0x1c: [io 0x1838-0x183b]
[ 0.209057] pci 0000:00:1f.2: reg 0x20: [io 0x1c20-0x1c3f]
[ 0.209068] pci 0000:00:1f.2: reg 0x24: [mem 0xfa626000-0xfa6267ff]
[ 0.209136] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.209212] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.209233] pci 0000:00:1f.3: reg 0x10: [mem 0xfa627400-0xfa6274ff 64bit]
[ 0.209262] pci 0000:00:1f.3: reg 0x20: [io 0x1c60-0x1c7f]
[ 0.209416] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.209529] pci 0000:03:00.0: [8086:4237] type 00 class 0x028000
[ 0.209568] pci 0000:03:00.0: reg 0x10: [mem 0xf4200000-0xf4201fff 64bit]
[ 0.209761] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.216689] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.216696] pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf42fffff]
[ 0.216780] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
[ 0.216803] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 0.216805] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.216823] pci 0000:15:00.0: reg 0x10: [mem 0xf4300000-0xf4300fff]
[ 0.216864] pci 0000:15:00.0: supports D1 D2
[ 0.216866] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.216927] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
[ 0.216953] pci 0000:15:00.2: reg 0x10: [mem 0xf4301000-0xf43010ff]
[ 0.217066] pci 0000:15:00.2: supports D1 D2
[ 0.217068] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.217125] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
[ 0.217150] pci 0000:15:00.4: reg 0x10: [mem 0xf4301800-0xf43018ff]
[ 0.217263] pci 0000:15:00.4: supports D1 D2
[ 0.217265] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.217322] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
[ 0.217347] pci 0000:15:00.5: reg 0x10: [mem 0xf4301c00-0xf4301cff]
[ 0.217460] pci 0000:15:00.5: supports D1 D2
[ 0.217462] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.217564] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.217569] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff]
[ 0.217574] pci 0000:00:1e.0: bridge window [mem 0xf4300000-0xf7ffffff]
[ 0.217581] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.217583] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.217585] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.217586] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.217588] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.217590] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.217592] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.217593] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.217653] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
[ 0.217657] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
[ 0.217685] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.223809] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.223820] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.223857] Found 1 acpi root devices
[ 0.223922] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.223986] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.223986] vgaarb: loaded
[ 0.223986] vgaarb: bridge control possible 0000:00:02.0
[ 0.223986] PCI: Using ACPI for IRQ routing
[ 0.227502] PCI: pci_cache_line_size set to 64 bytes
[ 0.227586] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.227588] e820: reserve RAM buffer [mem 0xbd6a1000-0xbfffffff]
[ 0.227590] e820: reserve RAM buffer [mem 0xbd7b7000-0xbfffffff]
[ 0.227592] e820: reserve RAM buffer [mem 0xbd8c7000-0xbfffffff]
[ 0.227594] e820: reserve RAM buffer [mem 0xbdc00000-0xbfffffff]
[ 0.227685] NetLabel: Initializing
[ 0.227687] NetLabel: domain hash size = 128
[ 0.227688] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.227700] NetLabel: unlabeled traffic allowed by default
[ 0.227715] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.227720] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.227724] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.229742] Switched to clocksource hpet
[ 0.232362] pnp: PnP ACPI init
[ 0.232379] ACPI: bus type PNP registered
[ 0.252696] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.252699] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.252701] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.252703] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.252705] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.252707] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.252709] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.252711] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.252713] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.252715] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.252716] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.252718] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.252721] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.252723] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.252727] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.272659] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.272661] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.272664] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.272666] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.272667] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.272669] system 00:01: [io 0x1680-0x169f] has been reserved
[ 0.272672] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.272674] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.272676] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.272678] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.272680] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.272682] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.272684] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.272739] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.272748] pnp 00:03: [dma 4]
[ 0.272766] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.272792] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.272830] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.272861] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.272892] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.272921] pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.292844] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.293234] pnp: PnP ACPI: found 10 devices
[ 0.293236] ACPI: bus type PNP unregistered
[ 0.300009] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.300014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.300016] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.300026] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.300029] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.300052] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.300054] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.300056] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.300058] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.300060] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.300065] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.300068] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.300071] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.300074] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.300076] pci 0000:00:1c.1: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.300079] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.300083] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.300088] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.300093] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.300100] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.300103] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff]
[ 0.300108] pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf42fffff]
[ 0.300112] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.300121] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.300123] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.300125] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.300127] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.300129] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
[ 0.300133] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.300135] pci 0000:15:00.0: BAR 13: assigned [io 0x3000-0x30ff]
[ 0.300137] pci 0000:15:00.0: BAR 14: assigned [io 0x3400-0x34ff]
[ 0.300139] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.300140] pci 0000:15:00.0: bridge window [io 0x3000-0x30ff]
[ 0.300146] pci 0000:15:00.0: bridge window [io 0x3400-0x34ff]
[ 0.300151] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
[ 0.300156] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.300162] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.300165] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff]
[ 0.300170] pci 0000:00:1e.0: bridge window [mem 0xf4300000-0xf7ffffff]
[ 0.300174] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.300182] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.300184] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.300186] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.300187] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.300189] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.300191] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.300192] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.300195] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.300196] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.300198] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.300200] pci_bus 0000:03: resource 0 [io 0x7000-0x7fff]
[ 0.300202] pci_bus 0000:03: resource 1 [mem 0xf4200000-0xf42fffff]
[ 0.300203] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.300205] pci_bus 0000:15: resource 0 [io 0x3000-0x6fff]
[ 0.300207] pci_bus 0000:15: resource 1 [mem 0xf4300000-0xf7ffffff]
[ 0.300209] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.300211] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.300212] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.300214] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.300216] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.300217] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.300219] pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.300221] pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.300223] pci_bus 0000:16: resource 0 [io 0x3000-0x30ff]
[ 0.300224] pci_bus 0000:16: resource 1 [io 0x3400-0x34ff]
[ 0.300226] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[ 0.300228] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.300265] NET: Registered protocol family 2
[ 0.300457] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.300690] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.300878] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.300932] TCP: reno registered
[ 0.300940] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.300970] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.301053] NET: Registered protocol family 1
[ 0.301066] pci 0000:00:02.0: Boot video device
[ 0.301991] PCI: CLS 64 bytes, default 64
[ 0.302031] Unpacking initramfs...
[ 0.363199] Freeing initrd memory: 3248K (ffff880037998000 - ffff880037cc4000)
[ 0.363208] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.363210] software IO TLB [mem 0xb96a1000-0xbd6a1000] (64MB) mapped at [ffff8800b96a1000-ffff8800bd6a0fff]
[ 0.363238] Simple Boot Flag at 0x35 set to 0x1
[ 0.363417] Scanning for low memory corruption every 60 seconds
[ 0.363745] audit: initializing netlink socket (disabled)
[ 0.363761] type=2000 audit(1390816732.363:1): initialized
[ 0.376055] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.377555] zbud: loaded
[ 0.377716] VFS: Disk quotas dquot_6.5.2
[ 0.377758] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.377933] msgmni has been set to 7703
[ 0.378225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.378261] io scheduler noop registered
[ 0.378263] io scheduler deadline registered
[ 0.378292] io scheduler cfq registered (default)
[ 0.378503] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.378668] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.378786] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.378791] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.378813] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.378816] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.378820] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.378834] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.378869] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 17aa ss_did 20f3
[ 0.378898] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.378910] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2942 ss_vid 17aa ss_did 20f3
[ 0.378934] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.378939] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.378995] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.378997] vesafb: scrolling: redraw
[ 0.378999] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.379450] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004800000, using 3072k, total 3072k
[ 0.403394] Console: switching to colour frame buffer device 128x48
[ 0.427226] fb0: VESA VGA frame buffer device
[ 0.427238] intel_idle: does not run on family 6 model 23
[ 0.427277] GHES: HEST is not enabled!
[ 0.427334] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.448019] 0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 17, base_baud = 115200) is a 16550A
[ 0.448162] Linux agpgart interface v0.103
[ 0.448228] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.456045] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.456072] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.456170] mousedev: PS/2 mouse device common for all mice
[ 0.456238] rtc_cmos 00:06: RTC can wake from S4
[ 0.456379] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.456408] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.456472] drop_monitor: Initializing network drop monitor service
[ 0.456534] TCP: cubic registered
[ 0.456631] NET: Registered protocol family 10
[ 0.456816] NET: Registered protocol family 17
[ 0.456828] Key type dns_resolver registered
[ 0.457049] registered taskstats version 1
[ 0.457713] Magic number: 14:393:981
[ 0.457799] rtc_cmos 00:06: setting system clock to 2014-01-27 09:58:53 UTC (1390816733)
[ 0.457879] PM: Hibernation image not present or could not be loaded.
[ 0.459170] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 0.459172] Write protecting the kernel read-only data: 8192k
[ 0.461316] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.462040] Freeing unused kernel memory: 1012K (ffff880001503000 - ffff880001600000)
[ 0.463192] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[ 0.472217] systemd-udevd[47]: starting version 208
[ 0.495432] ACPI: bus type USB registered
[ 0.495458] usbcore: registered new interface driver usbfs
[ 0.495469] usbcore: registered new interface driver hub
[ 0.495512] usbcore: registered new device driver usb
[ 0.495844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.496041] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.496152] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.496156] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.496161] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.496201] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 0.496371] hub 1-0:1.0: USB hub found
[ 0.496380] hub 1-0:1.0: 2 ports detected
[ 0.496558] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.496562] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.496567] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 0.496602] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 0.496771] hub 2-0:1.0: USB hub found
[ 0.496779] hub 2-0:1.0: 2 ports detected
[ 0.496929] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.496932] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.496947] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 0.496967] SCSI subsystem initialized
[ 0.496986] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 0.497128] hub 3-0:1.0: USB hub found
[ 0.497136] hub 3-0:1.0: 2 ports detected
[ 0.497306] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.497310] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.497315] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.497350] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 0.497482] hub 4-0:1.0: USB hub found
[ 0.497488] hub 4-0:1.0: 2 ports detected
[ 0.497640] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.497643] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.497648] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 0.497684] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 0.497810] hub 5-0:1.0: USB hub found
[ 0.497817] hub 5-0:1.0: 2 ports detected
[ 0.497957] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.497960] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.497965] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 0.498003] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 0.498556] hub 6-0:1.0: USB hub found
[ 0.498564] hub 6-0:1.0: 2 ports detected
[ 0.498723] libata version 3.00 loaded.
[ 0.499070] pata_acpi 0000:00:03.2: setting latency timer to 64
[ 0.499364] ata_generic 0000:00:03.2: setting latency timer to 64
[ 0.499867] ehci-pci: EHCI PCI platform driver
[ 0.500825] scsi0 : ata_generic
[ 0.500976] scsi1 : ata_generic
[ 0.501017] ata1: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18
[ 0.501019] ata2: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18
[ 0.501120] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 0.501420] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.501427] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 0.501441] ehci-pci 0000:00:1a.7: debug port 1
[ 0.505335] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.505357] ehci-pci 0000:00:1a.7: irq 23, io mem 0xfa626c00
[ 0.505888] sdhci: Secure Digital Host Controller Interface driver
[ 0.505890] sdhci: Copyright(c) Pierre Ossman
[ 0.506101] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
[ 0.506120] pci 0000:00:1e.0: setting latency timer to 64
[ 0.507472] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.508483] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.508545] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[ 0.513357] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.513540] hub 7-0:1.0: USB hub found
[ 0.513548] hub 7-0:1.0: 6 ports detected
[ 0.536738] hub 1-0:1.0: USB hub found
[ 0.536747] hub 1-0:1.0: 2 ports detected
[ 0.560057] hub 2-0:1.0: USB hub found
[ 0.560064] hub 2-0:1.0: 2 ports detected
[ 0.583392] hub 3-0:1.0: USB hub found
[ 0.583400] hub 3-0:1.0: 2 ports detected
[ 0.583584] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.583900] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.583907] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 0.583922] ehci-pci 0000:00:1d.7: debug port 1
[ 0.587822] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.587841] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfa627000
[ 0.596687] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.596823] hub 8-0:1.0: USB hub found
[ 0.596830] hub 8-0:1.0: 6 ports detected
[ 0.620052] hub 4-0:1.0: USB hub found
[ 0.620059] hub 4-0:1.0: 2 ports detected
[ 0.643388] hub 5-0:1.0: USB hub found
[ 0.643395] hub 5-0:1.0: 2 ports detected
[ 0.666727] hub 6-0:1.0: USB hub found
[ 0.666736] hub 6-0:1.0: 2 ports detected
[ 0.666812] ahci 0000:00:1f.2: version 3.0
[ 0.666915] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.666955] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.666976] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 0.666979] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
[ 0.666984] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.667519] scsi2 : ahci
[ 0.667582] scsi3 : ahci
[ 0.667641] scsi4 : ahci
[ 0.667699] scsi5 : ahci
[ 0.667742] ata3: SATA max UDMA/133 abar m2048@0xfa626000 port 0xfa626100 irq 42
[ 0.667743] ata4: DUMMY
[ 0.667745] ata5: DUMMY
[ 0.667746] ata6: DUMMY
[ 0.986695] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.987559] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.987562] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.987564] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.988382] ata3.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133
[ 0.988384] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.989285] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.989287] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.989289] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.990098] ata3.00: configured for UDMA/133
[ 0.990208] scsi 2:0:0:0: Direct-Access ATA HGST HTS725050A7 GH2Z PQ: 0 ANSI: 5
[ 0.992941] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.992944] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 0.992998] sd 2:0:0:0: [sda] Write Protect is off
[ 0.993001] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.993036] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.076699] usb 7-6: new high-speed USB device number 3 using ehci-pci
[ 1.077234] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.077733] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.363358] tsc: Refined TSC clocksource calibration: 2526.999 MHz
[ 1.436698] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 1.826147] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.363390] Switched to clocksource tsc
[ 2.384837] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.385108] systemd[1]: Set hostname to <hostname>.
[ 3.020950] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.021003] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.021015] systemd[1]: Starting Remote File Systems.
[ 3.021026] systemd[1]: Reached target Remote File Systems.
[ 3.021034] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.021061] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.021070] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.021093] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.021102] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.021121] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.021129] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.021153] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.021165] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.021196] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.021205] systemd[1]: Starting Journal Socket.
[ 3.021245] systemd[1]: Listening on Journal Socket.
[ 3.021449] systemd[1]: Starting Apply Kernel Variables...
[ 3.021979] systemd[1]: Starting Journal Service...
[ 3.022329] systemd[1]: Started Journal Service.
[ 3.527540] thinkpad_ec: thinkpad_ec 0.41 loaded.
[ 3.548541] tp_smapi 0.41 loading...
[ 3.548630] tp_smapi successfully loaded (smapi_port=0xb2).
[ 3.692910] systemd-journald[104]: Vacuuming done, freed 0 bytes
[ 4.052057] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 4.275058] systemd-udevd[135]: starting version 208
[ 5.539050] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 5.539194] ACPI: Lid Switch [LID]
[ 5.539249] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 5.539253] ACPI: Sleep Button [SLPB]
[ 5.539316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.539319] ACPI: Power Button [PWRF]
[ 5.558409] ACPI: Requesting acpi_cpufreq
[ 5.576148] Monitor-Mwait will be used to enter C-1 state
[ 5.576156] Monitor-Mwait will be used to enter C-2 state
[ 5.576160] Monitor-Mwait will be used to enter C-3 state
[ 5.576163] tsc: Marking TSC unstable due to TSC halts in idle
[ 5.576179] ACPI: acpi_idle registered with cpuidle
[ 5.576205] Switched to clocksource hpet
[ 5.612079] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 5.612185] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 5.613189] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 5.613498] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 5.624658] wmi: Mapper loaded
[ 5.686902] [drm] Initialized drm 1.1.0 20060810
[ 5.759536] Bluetooth: Core ver 2.16
[ 5.759560] NET: Registered protocol family 31
[ 5.759562] Bluetooth: HCI device and connection manager initialized
[ 5.759578] Bluetooth: HCI socket layer initialized
[ 5.759580] Bluetooth: L2CAP socket layer initialized
[ 5.759587] Bluetooth: SCO socket layer initialized
[ 5.775533] [drm] Memory usable by graphics device = 2048M
[ 5.775538] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 5.775540] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 5.775561] Console: switching to colour dummy device 80x25
[ 5.775662] i915 0000:00:02.0: setting latency timer to 64
[ 5.813939] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 5.813948] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.813949] [drm] Driver supports precise vblank timestamp query.
[ 5.813994] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.815326] pps_core: LinuxPPS API ver. 1 registered
[ 5.815328] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 5.815860] PTP clock support registered
[ 5.868929] ACPI: AC Adapter [AC] (on-line)
[ 5.908828] fbcon: inteldrmfb (fb0) is primary device
[ 5.973459] tpm_tis 00:09: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 5.973460] tpm_tis 00:09: Intel iTPM workaround enabled
[ 5.993930] ACPI: Battery Slot [BAT0] (battery present)
[ 5.995201] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.995202] ACPI: Thermal Zone [THM0] (18 C)
[ 5.996577] thermal LNXTHERM:01: registered as thermal_zone1
[ 5.996578] ACPI: Thermal Zone [THM1] (17 C)
[ 6.007966] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 6.007967] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 6.040594] usbcore: registered new interface driver btusb
[ 6.054550] Non-volatile memory driver v1.3
[ 6.078033] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 6.078034] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.078035] thinkpad_acpi: ThinkPad BIOS 7UET70WW (3.00 ), EC 7VHT14WW-1.03
[ 6.078035] thinkpad_acpi: Lenovo ThinkPad T400, model 2767WSD
[ 6.097896] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 6.098029] thinkpad_acpi: radio switch found; radios are enabled
[ 6.098111] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.098111] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.100039] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.102704] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 6.102770] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 6.103685] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 6.116703] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[ 6.151185] media: Linux media interface: v0.10
[ 6.188125] Linux video capture interface: v2.00
[ 6.448191] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 6.459562] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
[ 6.464806] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb7/7-6/7-6:1.0/input/input6
[ 6.464847] usbcore: registered new interface driver uvcvideo
[ 6.464848] USB Video Class driver (1.1.1)
[ 6.486718] Console: switching to colour frame buffer device 180x56
[ 6.489860] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.489862] i915 0000:00:02.0: registered panic notifier
[ 6.495027] acpi device:02: registered as cooling_device2
[ 6.495078] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 6.495118] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 6.495167] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.495243] mei_me 0000:00:03.0: setting latency timer to 64
[ 6.495270] mei_me 0000:00:03.0: irq 44 for MSI/MSI-X
[ 6.501432] e1000e 0000:00:19.0: setting latency timer to 64
[ 6.501513] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 6.501534] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 6.574169] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 6.574173] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 6.574179] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x3000-0x6fff]
[ 6.574181] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4300000-0xf7ffffff]
[ 6.574184] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4300000-0xf7ffffff:
[ 6.574188] excluding 0xf4300000-0xf46cffff
[ 6.574196] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 6.574198] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff:
[ 6.574207] excluding 0xf0000000-0xf3ffffff
[ 6.576532] r592: driver successfully loaded
[ 6.695857] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:7e:6a:db:bf
[ 6.695861] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 6.695887] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 6.695952] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130725/utaddress-251)
[ 6.695957] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.695961] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 6.695964] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.695966] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 6.695968] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.695969] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.695997] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.696201] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 6.715445] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.781879] cfg80211: Calling CRDA to update world regulatory domain
[ 6.810601] microcode: CPU0 sig=0x1067a, pf=

I have the same problem, but only with firefox, because is the only program that i use (also watch videos with VLC, but this have no problem).
I think we should report, but i'm not sure where.
A screenshot: http://imgur.com/QKrisQa
$lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
04:01.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
PD: Sorry for my bad grammar.

Similar Messages

  • After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out

    After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out.  There is no function at all.

    Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo.  It was suppose to show you how much data you use to help keep you within your limits.  If you have downloaded this, go through your settings and delete it and it will fix the problem.  At least it did for me.  I can now send photo's to non Iphone users via text no problem.

  • HT201487 My iPad is locked by iCloud after upgrade to system 8

    My iPad is locked by iCloud after an upgrade to system 8. I reset my password for my apple id and iCloud, but still cannot get into my iPad. The new password does not work on my iPad. What do I do next? This is ridiculous from an upgrade????

    I tried Apple Care, they would not give me to the Account Security Team, kept me on the phone for over an hour, and never did solve my problem. At the end of the call, my iPad was still locked.
    BUT I found this article and solved the problem myself:
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    So all is well now. If this happens to you, follow the directions in this article!

  • After upgrade 10A406e system crash

    Dear ALL,
    After upgrade to 5.1 10A406e .... after reboot  then system crash. Block screen and Apple TV light flash ..... Dead !!!
    Cheers,
    KK Lin

    Dear ALL,
    After upgrade to 5.1 10A406e .... after reboot  then system crash. Block screen and Apple TV light flash ..... Dead !!!
    Cheers,
    KK Lin

  • After Upgrading to iOS 8.1 text images are broken

    After upgrading to iOS  8.1 my pictures within the text I sent prior to upgrading are showing as broken links.  I can see pictures that were sent after upgrading just fine but the ones seen before upgrading are broken as can be seen in the attached images. 

    hey guys, it's same with me.. idk what's is wrong with it.. my battery only provide for 5 hours from full until its dead.. i tried to minimize all application and turn off everything likes location service. etc but its still not working,, please fix this Apple idk how to using my iphone 4s again, it's *****

  • S-660 Unable to use Sd card after upgradeing the system to KitKat

     Iam unable to use the Sd card after updateing the system to KitKat, 8gb card, its says insert Sd card, it was working porperly till i updated the system,pleses let me know how can i use the sd card ,i came to know kitkat u dont have option for external storage

    Even gone in System Information Panel...
    Model: Mid 2012 Retina Macbook Pro 15"

  • [solved] After a full-system upgrade (Linux 3.15.8) = Wifi undetected

    Hi, following this post, I'm seeking help concerning a big problem with my wifi.
    In fact, it has been a few months since my wifi interface isn't recognized anymore. Yesterday, after a few tests, I found it was due to the kernel version, so I tried to reinstall my first ArchLinux (Linux 3.13.5-1-ARCH) : it worked, my wifi was back. The problem was that I couldn't reinstall all my stuffs : so I did a full-system upgrade (knowing I will lose my wifi) and now I just want to fix it once and for all (I'm done dealing with it).
    So now, your help would be very appreciated. Does anyone have an idead? Or need more details about my config, my laptop, or whatever?
    Last edited by nugetchar (2014-08-09 20:30:44)

    Okay then, here we go :
    When I do a
    lspci
    I have the following output :
    [nugetchar@arch ~]$ lspci
    00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
    00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
    00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
    00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
    00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
    00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
    00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
    00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
    00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
    00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1)
    01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
    03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
    0c:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05)
    So, as you can see, the Network Controller is the following :
    03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
    When I do a
    ip link
    this is what I obtain :
    [nugetchar@arch ~]$ ip link
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
    link/ether f0:1f:af:25:3b:13 brd ff:ff:ff:ff:ff:ff
    6: enp0s20u2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether 6e:d6:2d:5c:29:bd brd ff:ff:ff:ff:ff:ff
    I started reading this page but am not sure if it is relevant due to the fact it concerns the 3.8.2B version.
    Finally, a
    more /etc/modprobe.d/modprobe.conf
    gives me the following output :
    ^C[nugetchar@arch ~]$ more /etc/modprobe.d/modprobe.conf
    alias floppy off
    blacklist fd0
    blacklist floppy
    blacklist ipv6
    blacklist bcma
    blacklist pcspkr
    blacklist snd_pcsp
    I think I need to unblacklist bcma ?
    @ewaller : I just saw you reply, here is the output for ls /lib/modules
    [nugetchar@arch ~]$ ls /lib/modules
    3.15.8-1-ARCH extramodules-3.13-ARCH extramodules-3.15-ARCH
    Thank you for your answers, I really appreciate it

  • [Solved] After upgrading system/VIrtualbox kernels won't load

    After running an update on my system and trying to use Virtualbox I recieve this:
    ============================================================
    WARNING: The vboxdrv kernel module is not loaded. Either there is no module
             available for the current kernel (3.16.4-1-ARCH) or it failed to
             load. Please reinstall the kernel module virtualbox-host-modules or
             if you don't use our stock kernel compile the modules with
               sudo dkms autoinstall
             You will not be able to start VMs until this problem is fixed.
    VBoxHeadless: Error -1908 in suplibOsInit!
    VBoxHeadless: Kernel driver not installed
    VBoxHeadless: Tip! Make sure the kernel module is loaded. It may also help to reinstall VirtualBox.
    ============================================================
    I have tried to reinstall virtualbox and the kernels, I've manually reloaded my kernel modules, and I still have no luck.
    Does anyone have any ideas?
    Last edited by cynicalpsycho (2014-10-25 20:19:22)

    Solution: Reboot system....  *Facepalm*

  • My photoshop quit unexpectedly after upgrade operating system

    When I upgrade my operating system from leopard to Lion ,  Now My photoshop CS5 quit unexpectedly . I open photoshop and its quit unexpectedly. How can I solve this problem. Please help.Thanks advance for your help.

    I have not upgraded to Lion yet, but maybe some of this helps …
    Boilerplate-text:
    As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
    System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
    http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
    Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
    If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.
    http://kb2.adobe.com/cps/905/cpsid_90508.html

  • [SOLVED] After pacman update, system no longer boots

    Updated pacman packages, and half-way through the upgrade proces fails (it mentions not being able to find package-control).  Upon investigating, I notice no programs are working.  I ls /usr/bin and it is empty!  In a panic, I restart the machine, and it no longer boots up. 
    My boot is on sda3 and /root is sda5.
    When bash starts up, it loads the kernel fine, and then after a second it panics and exclaims: "No init found. Try passing init=bootarg". 
    I load up my trusty Arch livecd and fsck the partitions.  Fsck claims both partitions are clean.  I am able to mount them and examine the file structure: all files look like they are there.  I then try to chroot the mounted partition (sda5, my /root), and get the error that "/bin/bash" is not found, even though it is there in the correct directory.  Not sure what to do now.
    My grub entry, which has always worked fine prior to this:
    legacy_kernel '/linux344-ck' 'acpi_osi=Linux' 'root=/dev/sda5' 'rootfstype=ext4' 'init=/sbin/init' 'pcie_aspm=force' 'acpi_backlight=vendor' 'i915.i915_enable_rc6=1' 'i915.i915_enable_fbc=1' 'i915.lvds_downclock=1' 'ipv6.disable=1' 'i915.semaphores=1' 'modprobe.blacklist=bluetooth,uvcvideo' 'ro'
    legacy_initrd '/initramfs-linux-fallback.img' '/initramfs-linux-fallback.img'
    UPDATE: solved issue.  I didn't read the news.  Upgrading via pacman broke my system because of this.  Now I know!  System is running smooth again.
    Last edited by corruptz0r (2012-07-15 20:26:53)

    Huh. I guess the problem was a couple of stale and crusty {,f}getty .service files, and an obsolete slim.service file I created a while back.
    Removing them fixed my problem, although tty1 still shows boot messages (not a problem, and may not even be "new" behaviour)
    Cheers Tomegun.

  • Deactivation after upgrading operating system

    Hey does anyone know how to deactivate Photoshop CS5, AFTER you've updating you Mac operating system? In hindsight i guess i should have deactivated it before updating my operating system. But it's too late now so how can i deactivate the old one so that i can reinstall it afresh on my new operating system?
    ta

    Hey, thanks for your time on this.
    Yeah, I wouldn't have expected any problems with activating different versions of CS at once, like you have. That all seems logical. But in my case I'm just looking to activate the same version of CS on two macs simultaneously (far as I know, Adobe allows two simultaneous activations of any given licence).
    Like you, I totally imagined the licence was related to the machine, hence me not deactivating it before upgrading my OSX. But it seems Adobe are saying the opposite; they're saying if you haven't deactivated it prior to upgrade your OSX, it still counts as one of your two activations. I don't get it. Anyway, hopefully adobe themselves will reply eventually and solve it.
    thanks v much

  • [SOLVED] After upgrade gdm and Gnome don't work.

    Hi,
    after I did an upgrade I had some ldconfig: errors and fixed them all using pkgfile and reinstallation of quite some packages.
    But now starting gdm with
    # systemctl start gdm
    only leads to a black screen with a cross shaped cursor I can move. Nothing more.
    Xorg works -- I'm writing this post from KDE.
    I reinstalled gnome and gnome-extra. Still no success.
    System is up to date.
    Hopefully my logs will help, I have no idea what to do. Thanks for any help. :)
    /var/log/Xorg.0.log
    [ 384.588]
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    [ 384.588] X Protocol Version 11, Revision 0
    [ 384.588] Build Operating System: Linux 3.8.7-1-ARCH x86_64
    [ 384.588] Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
    [ 384.588] Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 384.588] Build Date: 17 April 2013 02:37:06PM
    [ 384.588]
    [ 384.588] Current version of pixman: 0.30.0
    [ 384.588] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 384.588] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 384.589] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
    [ 384.589] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 384.589] (==) No Layout section. Using the first Screen section.
    [ 384.589] (==) No screen section available. Using defaults.
    [ 384.589] (**) |-->Screen "Default Screen Section" (0)
    [ 384.589] (**) | |-->Monitor "<default monitor>"
    [ 384.590] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 384.590] (**) | |-->Device "Intel Graphics"
    [ 384.590] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 384.590] (==) Automatically adding devices
    [ 384.590] (==) Automatically enabling devices
    [ 384.590] (==) Automatically adding GPU devices
    [ 384.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 384.590] Entry deleted from font path.
    [ 384.590] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 384.590] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/
    [ 384.590] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 384.590] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 384.590] (II) Loader magic: 0x7fcc20
    [ 384.590] (II) Module ABI versions:
    [ 384.590] X.Org ANSI C Emulation: 0.4
    [ 384.590] X.Org Video Driver: 14.1
    [ 384.590] X.Org XInput driver : 19.1
    [ 384.590] X.Org Server Extension : 7.0
    [ 384.591] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 384.594] (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
    [ 384.594] Initializing built-in extension Generic Event Extension
    [ 384.594] Initializing built-in extension SHAPE
    [ 384.594] Initializing built-in extension MIT-SHM
    [ 384.594] Initializing built-in extension XInputExtension
    [ 384.594] Initializing built-in extension XTEST
    [ 384.594] Initializing built-in extension BIG-REQUESTS
    [ 384.594] Initializing built-in extension SYNC
    [ 384.594] Initializing built-in extension XKEYBOARD
    [ 384.594] Initializing built-in extension XC-MISC
    [ 384.594] Initializing built-in extension SECURITY
    [ 384.594] Initializing built-in extension XINERAMA
    [ 384.594] Initializing built-in extension XFIXES
    [ 384.594] Initializing built-in extension RENDER
    [ 384.594] Initializing built-in extension RANDR
    [ 384.594] Initializing built-in extension COMPOSITE
    [ 384.594] Initializing built-in extension DAMAGE
    [ 384.594] Initializing built-in extension MIT-SCREEN-SAVER
    [ 384.594] Initializing built-in extension DOUBLE-BUFFER
    [ 384.594] Initializing built-in extension RECORD
    [ 384.595] Initializing built-in extension DPMS
    [ 384.595] Initializing built-in extension X-Resource
    [ 384.595] Initializing built-in extension XVideo
    [ 384.595] Initializing built-in extension XVideo-MotionCompensation
    [ 384.595] Initializing built-in extension XFree86-VidModeExtension
    [ 384.595] Initializing built-in extension XFree86-DGA
    [ 384.595] Initializing built-in extension XFree86-DRI
    [ 384.595] Initializing built-in extension DRI2
    [ 384.595] (II) LoadModule: "glx"
    [ 384.595] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 384.595] (II) Module glx: vendor="X.Org Foundation"
    [ 384.595] compiled for 1.14.1, module version = 1.0.0
    [ 384.595] ABI class: X.Org Server Extension, version 7.0
    [ 384.595] (==) AIGLX enabled
    [ 384.596] Loading extension GLX
    [ 384.596] (II) LoadModule: "intel"
    [ 384.596] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 384.596] (II) Module intel: vendor="X.Org Foundation"
    [ 384.596] compiled for 1.14.1, module version = 2.21.9
    [ 384.596] Module class: X.Org Video Driver
    [ 384.596] ABI class: X.Org Video Driver, version 14.1
    [ 384.596] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
    Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
    Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
    Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
    HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
    HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
    Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
    Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
    HD Graphics 4600, Iris(TM) Pro Graphics 5200,
    Haswell CRW Server (GT1), Haswell CRW Server (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, ValleyView PO board
    [ 384.597] (++) using VT number 1
    [ 384.602] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 384.602] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 384.602] (==) intel(0): RGB weight 888
    [ 384.602] (==) intel(0): Default visual is TrueColor
    [ 384.602] (**) intel(0): Option "AccelMethod" "sna"
    [ 384.603] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 384.603] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    [ 384.603] (**) intel(0): Framebuffer tiled
    [ 384.603] (**) intel(0): Pixmaps tiled
    [ 384.603] (**) intel(0): "Tear free" disabled
    [ 384.603] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 384.604] (II) intel(0): Output eDP1 has no monitor section
    [ 384.604] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 384.605] (II) intel(0): Output VGA1 has no monitor section
    [ 384.605] (II) intel(0): Output HDMI1 has no monitor section
    [ 384.605] (II) intel(0): Output DP1 has no monitor section
    [ 384.606] (II) intel(0): EDID for output eDP1
    [ 384.606] (II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
    [ 384.606] (II) intel(0): Year: 2011 Week: 0
    [ 384.606] (II) intel(0): EDID Version: 1.4
    [ 384.606] (II) intel(0): Digital Display Input
    [ 384.606] (II) intel(0): 8 bits per channel
    [ 384.606] (II) intel(0): Digital interface is DisplayPort
    [ 384.606] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
    [ 384.606] (II) intel(0): Gamma: 2.20
    [ 384.606] (II) intel(0): No DPMS capabilities specified
    [ 384.606] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 384.606] (II) intel(0): First detailed timing is preferred mode
    [ 384.606] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 384.606] (II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
    [ 384.606] (II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
    [ 384.606] (II) intel(0): Manufacturer's mask: 0
    [ 384.606] (II) intel(0): Supported detailed timing:
    [ 384.606] (II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
    [ 384.606] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
    [ 384.606] (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
    [ 384.606] (II) intel(0): Unknown vendor-specific block f
    [ 384.606] (II) intel(0): SAMSUNG
    [ 384.606] (II) intel(0): LSN133KL018
    [ 384.606] (II) intel(0): EDID (in hex):
    [ 384.606] (II) intel(0): 00ffffffffffff004ca3463500000000
    [ 384.606] (II) intel(0): 00150104a51d10780209e59757548a27
    [ 384.606] (II) intel(0): 22505400000001010101010101010101
    [ 384.606] (II) intel(0): 010101010101382740c0608420303020
    [ 384.606] (II) intel(0): 250025a5100000190000000f00000000
    [ 384.606] (II) intel(0): 000000000028800a1e00000000fe0053
    [ 384.606] (II) intel(0): 414d53554e470a2020202020000000fe
    [ 384.606] (II) intel(0): 004c534e3133334b4c3031380a200003
    [ 384.606] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 384.606] (II) intel(0): Printing probed modes for output eDP1
    [ 384.606] (II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    [ 384.606] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 384.606] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 384.606] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 384.606] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 384.608] (II) intel(0): EDID for output VGA1
    [ 384.608] (II) intel(0): EDID for output HDMI1
    [ 384.608] (II) intel(0): EDID for output DP1
    [ 384.608] (II) intel(0): Output eDP1 connected
    [ 384.608] (II) intel(0): Output VGA1 disconnected
    [ 384.608] (II) intel(0): Output HDMI1 disconnected
    [ 384.608] (II) intel(0): Output DP1 disconnected
    [ 384.608] (II) intel(0): Using exact sizes for initial modes
    [ 384.608] (II) intel(0): Output eDP1 using initial mode 1600x900
    [ 384.608] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 384.608] (==) intel(0): DPI set to (96, 96)
    [ 384.608] (II) Loading sub module "dri2"
    [ 384.608] (II) LoadModule: "dri2"
    [ 384.608] (II) Module "dri2" already built-in
    [ 384.608] (==) Depth 24 pixmap format is 32 bpp
    [ 384.608] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
    [ 384.608] (==) intel(0): Backing store disabled
    [ 384.608] (==) intel(0): Silken mouse enabled
    [ 384.608] (II) intel(0): HW Cursor enabled
    [ 384.608] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 386.414] (==) intel(0): DPMS enabled
    [ 386.414] (II) intel(0): [DRI2] Setup complete
    [ 386.414] (II) intel(0): [DRI2] DRI driver: i965
    [ 386.414] (II) intel(0): direct rendering: DRI2 Enabled
    [ 386.414] (==) intel(0): hotplug detection: "enabled"
    [ 386.415] (--) RandR disabled
    [ 386.430] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 386.430] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 386.430] (II) AIGLX: enabled GLX_ARB_create_context
    [ 386.430] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 386.430] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 386.430] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 386.430] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 386.430] (II) AIGLX: Loaded and initialized i965
    [ 386.430] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 386.430] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
    [ 386.446] (II) intel(0): Setting screen physical size to 423 x 238
    [ 386.508] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 386.508] (**) Power Button: Applying InputClass "system-keyboard"
    [ 386.508] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 386.508] (II) LoadModule: "evdev"
    [ 386.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 386.509] (II) Module evdev: vendor="X.Org Foundation"
    [ 386.509] compiled for 1.14.0, module version = 2.8.0
    [ 386.509] Module class: X.Org XInput Driver
    [ 386.509] ABI class: X.Org XInput driver, version 19.1
    [ 386.509] (II) Using input driver 'evdev' for 'Power Button'
    [ 386.509] (**) Power Button: always reports core events
    [ 386.509] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 386.509] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 386.509] (--) evdev: Power Button: Found keys
    [ 386.509] (II) evdev: Power Button: Configuring as keyboard
    [ 386.509] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 386.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 386.510] (**) Option "xkb_rules" "evdev"
    [ 386.510] (**) Option "xkb_model" "evdev"
    [ 386.510] (**) Option "xkb_layout" "de"
    [ 386.535] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
    [ 386.535] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 386.535] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 386.535] (II) Using input driver 'evdev' for 'Video Bus'
    [ 386.535] (**) Video Bus: always reports core events
    [ 386.535] (**) evdev: Video Bus: Device: "/dev/input/event10"
    [ 386.535] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 386.535] (--) evdev: Video Bus: Found keys
    [ 386.535] (II) evdev: Video Bus: Configuring as keyboard
    [ 386.535] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event10"
    [ 386.535] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 386.535] (**) Option "xkb_rules" "evdev"
    [ 386.535] (**) Option "xkb_model" "evdev"
    [ 386.535] (**) Option "xkb_layout" "de"
    [ 386.536] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 386.536] (**) Power Button: Applying InputClass "system-keyboard"
    [ 386.536] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 386.536] (II) Using input driver 'evdev' for 'Power Button'
    [ 386.536] (**) Power Button: always reports core events
    [ 386.536] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 386.536] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 386.536] (--) evdev: Power Button: Found keys
    [ 386.536] (II) evdev: Power Button: Configuring as keyboard
    [ 386.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
    [ 386.536] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 386.536] (**) Option "xkb_rules" "evdev"
    [ 386.536] (**) Option "xkb_model" "evdev"
    [ 386.536] (**) Option "xkb_layout" "de"
    [ 386.536] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 386.536] (II) No input driver specified, ignoring this device.
    [ 386.536] (II) This device may have been added with another device file.
    [ 386.537] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 386.537] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
    [ 386.537] (II) No input driver specified, ignoring this device.
    [ 386.537] (II) This device may have been added with another device file.
    [ 386.538] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    [ 386.538] (II) No input driver specified, ignoring this device.
    [ 386.538] (II) This device may have been added with another device file.
    [ 386.538] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
    [ 386.538] (II) No input driver specified, ignoring this device.
    [ 386.538] (II) This device may have been added with another device file.
    [ 386.539] (II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
    [ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
    [ 386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
    [ 386.539] (II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
    [ 386.539] (**) Webcam SC-13HDL11624N: always reports core events
    [ 386.539] (**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
    [ 386.539] (--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
    [ 386.539] (--) evdev: Webcam SC-13HDL11624N: Found keys
    [ 386.539] (II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
    [ 386.539] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8/event8"
    [ 386.539] (II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
    [ 386.539] (**) Option "xkb_rules" "evdev"
    [ 386.539] (**) Option "xkb_model" "evdev"
    [ 386.539] (**) Option "xkb_layout" "de"
    [ 386.540] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 386.540] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    [ 386.541] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 386.541] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 386.541] (**) AT Translated Set 2 keyboard: always reports core events
    [ 386.541] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 386.541] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 386.541] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 386.541] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 386.541] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 386.541] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    [ 386.541] (**) Option "xkb_rules" "evdev"
    [ 386.541] (**) Option "xkb_model" "evdev"
    [ 386.541] (**) Option "xkb_layout" "de"
    [ 386.542] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
    [ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    [ 386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
    [ 386.542] (II) LoadModule: "synaptics"
    [ 386.542] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 386.543] (II) Module synaptics: vendor="X.Org Foundation"
    [ 386.543] compiled for 1.14.1, module version = 1.7.1
    [ 386.543] Module class: X.Org XInput Driver
    [ 386.543] ABI class: X.Org XInput driver, version 19.1
    [ 386.543] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [ 386.543] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 386.543] (**) Option "Device" "/dev/input/event9"
    [ 386.563] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    [ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
    [ 386.563] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
    [ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    [ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [ 386.564] (**) Option "TapButton1" "1"
    [ 386.564] (**) Option "TapButton2" "2"
    [ 386.564] (**) Option "TapButton3" "3"
    [ 386.564] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
    [ 386.564] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 386.564] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 386.570] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 386.570] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
    [ 386.570] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    [ 386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
    [ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [ 386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [ 386.571] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 386.572] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [ 386.572] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 386.573] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    [ 386.573] (II) No input driver specified, ignoring this device.
    [ 386.573] (II) This device may have been added with another device file.
    [ 386.899] (II) intel(0): EDID vendor "SEC", prod id 13638
    [ 386.899] (II) intel(0): Printing DDC gathered Modelines:
    [ 386.899] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    [ 387.041] (II) intel(0): EDID vendor "SEC", prod id 13638
    [ 387.041] (II) intel(0): Printing DDC gathered Modelines:
    [ 387.041] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    [ 387.069] (II) intel(0): EDID vendor "SEC", prod id 13638
    [ 387.069] (II) intel(0): Printing DDC gathered Modelines:
    [ 387.069] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    [ 389.740] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 391.348] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 391.348] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
    [ 391.367] (II) intel(0): EDID vendor "SEC", prod id 13638
    [ 391.367] (II) intel(0): Printing DDC gathered Modelines:
    [ 391.367] (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    [ 391.369] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 397.614] (II) AIGLX: Suspending AIGLX clients for VT switch
    and
    /var/log/gdm/:0.log
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.8.7-1-ARCH x86_64
    Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
    Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    Build Date: 17 April 2013 02:37:06PM
    Current version of pixman: 0.30.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 9 00:18:24 2013
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    (**) | |-->Device "Intel Graphics"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Automatically adding GPU devices
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    (II) config/udev: Adding drm device (/dev/dri/card0)
    (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.14.1, module version = 1.0.0
    (==) AIGLX enabled
    Loading extension GLX
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.14.1, module version = 2.21.9
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
    Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
    Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
    Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
    HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
    HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
    Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
    Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
    HD Graphics 4600, Iris(TM) Pro Graphics 5200,
    Haswell CRW Server (GT1), Haswell CRW Server (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, ValleyView PO board
    (++) using VT number 1
    (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    (**) intel(0): Framebuffer tiled
    (**) intel(0): Pixmaps tiled
    (**) intel(0): "Tear free" disabled
    (**) intel(0): Forcing per-crtc-pixmaps? no
    (II) intel(0): Output eDP1 has no monitor section
    (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    (II) intel(0): Output VGA1 has no monitor section
    (II) intel(0): Output HDMI1 has no monitor section
    (II) intel(0): Output DP1 has no monitor section
    (II) intel(0): EDID for output eDP1
    (II) intel(0): Manufacturer: SEC Model: 3546 Serial#: 0
    (II) intel(0): Year: 2011 Week: 0
    (II) intel(0): EDID Version: 1.4
    (II) intel(0): Digital Display Input
    (II) intel(0): 8 bits per channel
    (II) intel(0): Digital interface is DisplayPort
    (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
    (II) intel(0): Gamma: 2.20
    (II) intel(0): No DPMS capabilities specified
    (II) intel(0): Supported color encodings: RGB 4:4:4
    (II) intel(0): First detailed timing is preferred mode
    (II) intel(0): Preferred mode is native pixel format and refresh rate
    (II) intel(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.540
    (II) intel(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
    (II) intel(0): Manufacturer's mask: 0
    (II) intel(0): Supported detailed timing:
    (II) intel(0): clock: 100.4 MHz Image Size: 293 x 165 mm
    (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1792 h_border: 0
    (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 v_blanking: 932 v_border: 0
    (II) intel(0): Unknown vendor-specific block f
    (II) intel(0): SAMSUNG
    (II) intel(0): LSN133KL018
    (II) intel(0): EDID (in hex):
    (II) intel(0): 00ffffffffffff004ca3463500000000
    (II) intel(0): 00150104a51d10780209e59757548a27
    (II) intel(0): 22505400000001010101010101010101
    (II) intel(0): 010101010101382740c0608420303020
    (II) intel(0): 250025a5100000190000000f00000000
    (II) intel(0): 000000000028800a1e00000000fe0053
    (II) intel(0): 414d53554e470a2020202020000000fe
    (II) intel(0): 004c534e3133334b4c3031380a200003
    (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    (II) intel(0): Printing probed modes for output eDP1
    (II) intel(0): Modeline "1600x900"x60.1 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    (II) intel(0): EDID for output VGA1
    (II) intel(0): EDID for output HDMI1
    (II) intel(0): EDID for output DP1
    (II) intel(0): Output eDP1 connected
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output HDMI1 disconnected
    (II) intel(0): Output DP1 disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output eDP1 using initial mode 1600x900
    (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (==) intel(0): DPI set to (96, 96)
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): HW Cursor enabled
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (==) intel(0): DPMS enabled
    (II) intel(0): [DRI2] Setup complete
    (II) intel(0): [DRI2] DRI driver: i965
    (II) intel(0): direct rendering: DRI2 Enabled
    (==) intel(0): hotplug detection: "enabled"
    (--) RandR disabled
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_INTEL_swap_event
    (II) AIGLX: enabled GLX_ARB_create_context
    (II) AIGLX: enabled GLX_ARB_create_context_profile
    (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized i965
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
    (II) intel(0): Setting screen physical size to 423 x 238
    (II) config/udev: Adding input device Power Button (/dev/input/event4)
    (**) Power Button: Applying InputClass "system-keyboard"
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.14.0, module version = 2.8.0
    (II) Using input driver 'evdev' for 'Power Button'
    (**) Power Button: always reports core events
    (**) evdev: Power Button: Device: "/dev/input/event4"
    (--) evdev: Power Button: Vendor 0 Product 0x1
    (--) evdev: Power Button: Found keys
    (II) evdev: Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (II) config/udev: Adding input device Video Bus (/dev/input/event10)
    (**) Video Bus: Applying InputClass "system-keyboard"
    (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Video Bus'
    (**) Video Bus: always reports core events
    (**) evdev: Video Bus: Device: "/dev/input/event10"
    (--) evdev: Video Bus: Vendor 0 Product 0x6
    (--) evdev: Video Bus: Found keys
    (II) evdev: Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    (II) config/udev: Adding input device Power Button (/dev/input/event3)
    (**) Power Button: Applying InputClass "system-keyboard"
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Power Button'
    (**) Power Button: always reports core events
    (**) evdev: Power Button: Device: "/dev/input/event3"
    (--) evdev: Power Button: Vendor 0 Product 0x1
    (--) evdev: Power Button: Found keys
    (II) evdev: Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding drm device (/dev/dri/card0)
    (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
    (**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
    (**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
    (**) Webcam SC-13HDL11624N: always reports core events
    (**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
    (--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
    (--) evdev: Webcam SC-13HDL11624N: Found keys
    (II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
    (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    (--) evdev: AT Translated Set 2 keyboard: Found keys
    (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
    (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    (**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.14.1, module version = 1.7.1
    (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    (**) ETPS/2 Elantech Touchpad: always reports core events
    (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
    (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
    (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    (**) ETPS/2 Elantech Touchpad: always reports core events
    (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
    (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
    (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    (II) No input driver specified, ignoring this device.
    (II) This device may have been added with another device file.
    (II) intel(0): EDID vendor "SEC", prod id 13638
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    (II) intel(0): EDID vendor "SEC", prod id 13638
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (II) intel(0): EDID vendor "SEC", prod id 13638
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
    (II) intel(0): EDID vendor "SEC", prod id 13638
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1600x900"x0.0 100.40 1600 1648 1680 1792 900 902 907 932 -hsync -vsync (56.0 kHz eP)
    (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    (II) AIGLX: Suspending AIGLX clients for VT switch
    Last edited by Duxon (2013-06-15 16:17:35)

    Finally managed fixed it.
    libcanberra-pulse from [extra] was broken. I reinstalled it with --force.
    Likely that came with the recent pulseaudio upgrade.

  • Backing up - how to solve after copying whole system - login incorrect

    Hello,
    I have done an script to backup the whole filesystem and restore it. I am making tests before using forever.
    For Windows I use ntfsclone and it works perfect, but for ArchLinux I am doing:
    I use Knoppix cd-live to manage everything. I load the script from /dev/sda4 (data partition in ntfs) and the main commands to backup and restore are:
    Without doing chroot (because it is not possible)
    sudo mount /dev/sda5 /media/sda5 #This is the / of ArchLinux
    sudo rsync -aAXv /media/sda5/* /media/sda4/seccopy/ --exclude={/media/sda5/dev/*,/media/sda5/proc/*,/media/sda5/tmp/*,/media/sda5/run/*,/media/sda5/mnt/*,/media/sda5/media/*,/media/sda5/lost+found,/media/sda5/home/*,/media/sda5/var/lib/pacman/sync/*}
    cd /media/sda4/seccopy/
    sudo tar -zcvf /media/sda4/arch_copy.tar.gz ./*
    To restore:
    sudo mount /dev/sda5 /media/sda5
    sudo rm -r /media/sda5/*
    sudo tar -zxvf /media/sda4/arch_copy.tar.gz -C /media/sda5
    I can check that the files are copied correctly.
    I can do (and really do) the same with the home partition, same process but changing sda5 by sda6, and instead of arch_copy.tar.gz, arch_home_copy.tar.gz
    When I restart to boot in the new copied system... the problem:
    I go to the normal grub option for Arch Linux and I try again to put the password for ussr1, and nothing.
    I type it, enter, wait some seconds and prompt me again.
    I try with the root user, and its password, and the same problem. Not access to the system.
    I try in tty1, and the same problem, it says:
    Login incorrect
    First question: How to solve this situation?
    I think maybe the problem is something about /etc/passwd or /etc/shadow, and also I try to make chroot to see if it works.
    If I try to do chroot from Knoppix to the ArchLinux restored, it is not possible, everything goes ok from this wiki:
    https://wiki.archlinux.org/index.php/Change_Root
    but fails in this:
    Note: If you see the error chroot: cannot run command '/bin/bash': Exec format error, it is likely that the two architectures do not match.
    I don't know what is "architectures". I installed x86_64 in ArchLinux.
    Second question: Is because the Knoppix 7.0.4 (debian based) uses other? Like i686?
    I see in Internet this:
    http://www.cyberciti.biz/tips/recoverin … -file.html
    It is not my problem, but maybe it is a way to know if is correct or not,...-
    mode "recovery", edit, add to linux line after "ro single": init=/bin/bash
    Ctrl+x
    Logged as root automatically:
    Third question: Why is not prompted the password? And illegitimate user can see everything doing this.
    $ mount -rw -o remount /
    $ mount -rw -o remount /home
    mount: /home not mounted or bad option
    In some cases useful info is found in syslog -try
    dmesg | tail or so
    Fourth question: Why i cannot mount the home? It is in the /dev/sda6, but for the / it didn't say anything to me. I cannot see the /home directory.
    $ cat /etc/passwd
    #- Has the root user and the ussr1 user
    $ cat /etc/shadow
    #- Has the root and ussr1 password coded.
    $ passwd
    Enter new UNIX password:
    Retype new UNIX password:
    Fifth question: Why is not prompted for the before password?     (following the steps i can imagine that this doesn't work, so, is not a security problem)
    $ passwd ussr1
    Enter new UNIX password:
    Retype new UNIX password:
    $ sudo reboot:
    sudo: /usr/lib/sudoers.so must be only be writable by owner
    sudo: fatal error, unable to laod plugins
    $ reboot
    Failed to talk to init daemon.
    $ exit
    exit
    [ 377.105707] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
    [ 377.105707]
    Sixth question: Why I cannot exit correctly? It also happen if I use the Arch in Live mode (and try to exit).
    The only way to avoid this problem is unpluging from electrical power (not even with the power button).
    I start the system again, I go to the normal grub option for Arch Linux and I try again to put the password for ussr1, and nothing.
    I type it, enter, wait some seconds and prompt me again.
    The same as first question: How to solve this situation?
    My idea is only use Knoppix live-cd to use as backup/restore system, but if it is not possible, I would like to know how to solve.
    The idea of using rsync instead of dd is because I want to save only the data, and not all the sectors (not enough space in the hard disk).
    I don't mind to have to use arch linux usb installation media as it is "knoppix live-cd", the only thing I would like to use is the same media to do all the operations, because I want to teach normal users how to do it by themselves.

    cfr wrote:What's the exit value when you run passwd? (man passwd will show what the exit values mean.)
    value 0 -> success
    cfr wrote:Have you tried changing the password to something *other* than the existing password?
    tried for example with "something" for both, "root" and "ussr1"
    but if I go to /etc/shadow, I see that the passwords coded for root and ussr1 are not the same, so must be coded with other things too.
    cfr wrote:Have you tried creating a new user and logging in as that user?
    I added another user, for example "try"
    useradd -m -g users -s /bin/bash try
    passwd try & echo "$?"
    .. (something)
    0
    Ok, after just add the user, if I go to /home/ I can see some files created automatically, and if I compare those files with the files that I pasted in my ussr1 account, there are two that are missed:
    .xinitrc
    .xsession
    xinitrc is executed by startx (so, it is because the X11..)
    and..ok, xsession the same (xdm/gdm/kdm). So nothing here.
    I also add "try" to the groups: lp, games, video, audio, optical, storage, scanner   with:
    gpasswd -a try lp
    cfr wrote:Have you run pwck and grpck to check the integrity of the files? (I doubt this is the issue but it seems an easy step to do just on the off chance.)
    Ok, if I do:
    $ pwck; echo "$?"
    0
    $ pwck /etc/passwd; echo "$?"
    0
    $ pwck /etc/shadow; echo "$?"
    invalid password file entry
    delete line 'root:ahskldfhajksdfkahsjkdhf...asdkfhjashdkfjh:15795::::::'?
    invalid password file entry
    delete line 'bin:x:14871::::::'?
    so forth..with: root, bin, daemon, mail, ftp, http, uuidd, dbus and nobody
    user 'ussr1': directory '7' does not exist
    user 'polkitd': directory '7' does not exist
    user 'usbmux': directory '7' does not exist
    user 'mysql': directory '7' does not exist
    invalid password file entry
    delete line 'kdm:!:15793::::::'?
    invalid password file entry
    delete line 'avahi:!:15793::::::'?
    user 'try': directory '7' does not exist
    pwck: no changes
    2
    $grpck /etc/group; echo "$?"
    0
    $grpck /etc/gshadow; echo "$?"
    invalid group file entry
    delete line 'root:::root'?
    invalid group file entry
    delete line 'root:::root'?
    invalid group file entry
    delete line 'root:::root'?
    ...so forth
    with: root, bin, daemon, sys, adm, tty, disk, lp, mem, kmem, wheel, ftp, mail, uucp, log, utmp, locate, rfkill, smmsp, http, games, lock, uuidd, dbus, network, video, audio, optical, floppy, storage, scanner, power, nobody, users, systemd-journal, polkitd, usbmux, mysql, kdm, avahi
    grpck: no changes
    2
    So, cat /etc/gshadow | wc -l    = 40 lines
    And grpck /etc/gshadow | wc -l  = 40 lines
    And the same for /etc/shadow = 16 lines and the pwck were 11 "delete line" and 5 "directory '7' does not exist"
    But as we see, even the try has some error... in this case with directory '7'.
    I don't understand why errors... theoretically they were copied and pasted without modifications
    NOTE** Ok, my fault, I have to execute the command like this: $ pwck -r /etc/passwd /etc/shadow; echo "$?"    and now it answers: 0         So, the integrity of both files are correct! And the same with group and gshadow
    ewaller wrote:
    Inside the chroot, run pacman -Qk | grep -v ", 0 missing"
    And see if there are any packages that should be reinstalled.
    If not, reinstall pam, just for good measure
    With
    $pacman -Qk | grep -v ", 0 missing"
    no results.
    I execute it without doing anything before with pacman, no updating, absolutely nothing.
    pam?
    i search for pam, and i find "pam mount", something like "encrypted home". But Was it activated by default?
    Last edited by Zzipo (2013-03-31 21:57:57)

  • [SOLVED] after upgrade : /sbin/init does not exist. Bailing out, ...

    hi, after having upgraded today my archlinux, I cannot boot it. I get the following message : "ERROR: Root device mounted successfully, but /sbin/init does not exist. Bailing out, you are on you own. Good luck."
    The last time the system was upgraded was in june 2013, before the "Binaries move to /usr/bin requiring update intervention" advisory (https://www.archlinux.org/news/binaries … ervention/). So before upgrading I followed the instructions given in this article and was able to upgrade. But after reboot I got the error message I'm reporting here.
    Here is a copy  of the config I'm using to boot arch in grub:
    menuentry "Archlinux" {
            load_video
            set gfxpayload=keep
            insmod gzio
            insmod part_msdos
            insmod ext2
            set root='hd0,msdos7'
            echo 'Loading of Archlinux, kernel v.3.xx.xx ...'
            linux /boot/vmlinuz-linux root=/dev/sda7 ro
            initrd /boot/initramfs-linux.img
    Last edited by heavytull (2014-03-06 21:24:48)

    karol wrote:
    There have been quite a few changes since you last updated e.g. we're using 'rw' instead of 'ro'. Try
    linux /boot/vmlinuz-linux root=/dev/sda7 rw init=/usr/lib/systemd/systemd
    It's now much better. But a lot of errors are reported and the system hangs, but still rebootable with Ctrl + Alt + Del.
    Here are the error messages:
    [FAILED] Failed to mount Configuration File System.
    See 'systemctl status sys-kernel-config.mount' for details.
    [FAILED] Failed to mount Huge Pages File System.
    See 'systemctl status dev-hugepages.mount' for details.
    [FAILED] Failed to mount POSIX Message Queue File System.
    See 'systemctl status dev-mqueue.mount' for details.
    [FAILED] Failed to mount Temporary Directory.
    See 'systemctl status tmp.mount' for details.
    [FAILED] Failed to start Remount Root and Kernel File System.
    See 'systemctl status systemd-remount-fs.service' for details.

  • [solved]After upgrading to [testing] , yaourt gives errors (permision)

    (continued as far up as the terminal will scroll)
    error:
    error:
    error:
    error:
    error:
    error:
    error:
    picasa-beta-3.0_57.2401.0-2: description file is missing
    picasa-beta-3.0_57.2401.0-2: dependency file is missing
    picasa-beta-3.0_57.2401.0-2: file list is missing
    flashplugin-10.0.d20.7-3: description file is missing
    flashplugin-10.0.d20.7-3: dependency file is missing
    flashplugin-10.0.d20.7-3: file list is missing
    ttf-vista-fonts-1-2: description file is missing
    ttf-vista-fonts-1-2: dependency file is missing
    ttf-vista-fonts-1-2: file list is missing
    Is what shows up after I install something with Yaourt. The weird thing is it only shows packages I've recently installed (flashplugin from [testin], picasa from AUR and the fonts from AUR). Doesn't make sense because I don't think it upgraded pacman or anything when I upgraded to [testing]. BTW everything still installs fine, just that's pretty annoying still.
    EDIT: IN attempt to reinstall yaourt, I get this, potentially a permissions problem?
    % makepkg
    ==> Making package: yaourt-git 20081119-1 x86_64 (Wed Nov 19 19:06:30 PST 2008)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Missing Dependencies:
    -> error:
    -> could
    -> not
    -> open
    -> file
    -> /var/lib/pacman/local/flashplugin-10.0.d20.7-3/depends:
    -> Permission
    -> denied
    -> error:
    -> could
    -> not
    -> open
    -> file
    -> /var/lib/pacman/local/picasa-beta-3.0_57.2401.0-2/depends:
    -> Permission
    -> denied
    -> error:
    -> could
    -> not
    -> open
    -> file
    -> /var/lib/pacman/local/ttf-vista-fonts-1-2/depends:
    -> Permission
    -> denied
    -> git
    ==> ERROR: Could not resolve all dependencies.
    austin@austin-desktop ~/Desktop/yaourt-git
    I'll try root and see if it helps things out.
    And no problems as root...why are the permissions defaulting to the wrong thing?
    Also, every thing I try, pacman always sets the permissions wrong (tried as root, with youart, wihout it, with sudo, etc). I gotta run chmod -R 755 /usr/local/pacman/local every time to fix it, why isn't it setting it right by default?
    EDIT: Looks like a bug to me, so I bugreported it http://bugs.archlinux.org/task/12187
    Last edited by doorknob60 (2008-11-22 02:02:53)

    Boot with the failsafe image, which should have all possible modules included. All that needs to be done during this process is to load the modules needed to initiate the hard disk controller and then read from the filesystem.
    Unfortunately, that is not what you're facing. It looks to me like hardware incompatibility, possibly the cpufreq module. Paste your lspci, rc.conf and mkinitcpio.conf and hope for further assistance. It will also be good if you could include the output of mkinitcpio -p kernel26 and mkinitcpio -vp kernel26 (pastebin this one; it'll be very long).
    Last edited by schivmeister (2010-06-17 02:07:22)

Maybe you are looking for