[SOLVED] Clipboard gets overwritten on simple selection

Hello!
I'm facing a very annoying bug: I'm used to use a clipboard manager. I started using parcellite. After some time of usage, suddenly the behavior of the clipboard changes. Every time I select some text in e.g. Eclipse, geany, Firefox, ... the clipboard content gets overwritten. When I now press Ctrl+V the previously selected text gets inserted. When I copy selected text with Ctrl+C, double click on text I want to replace, press Ctrl+V, nothing happens because it uses the selected text to insert which is, in this case, the same.
Currently I'm trying xfce4-clipman-plugin, but the same bug applies here too. It's not buggy when I freshly started Openbox, the bug occures after minutes of operation.
Anybody an idea?
Regards,
duese
Last edited by duese (2015-04-17 07:56:44)

I found the solution!
I started each application I'm currently using one by one and tested it. It seems that TigerVNC is causing this bug. I activated the option "Send primary selection & cut buffer as clipboard" (I think this is the english equivalent to the german option "Primäre Auswahl und Ausschneidepuffer als Zwischenablage senden"). As soon as I deactivated this option, everything works fine!

Similar Messages

Records are getting overwritten in the internal table using Select query.

Hi All,
I have following query :
Loop at i_salesplant.
       select maramatnr mvkeVKORG mvkeVTWEG maraZZCOEAFE maraZZCOEAFEUOM mvkeZZALLPOL
       into corresponding fields of table i_zallocpol from mara inner join mvke on
       mvkematnr = maramatnr
       where MARA~zzobjtype = I_ZZOBJTYPE
         and MVKE~VKORG = i_salesplant-vkorg
         and MVKE~VTWEG = T_VTWEG.
     ENDLOOP.
My Que : For example lets say first it selects all the records for Sales Org 1000. Next when you select the records for the Sales Org 2000 the earlier records are getting overwritten.
Please let me know your valuable inputs.
Thanks,
Chandravadan

Hi,
Thanks alot for the reply.
I changed query using appending as follows :
      Loop at i_salesplant.
        select maramatnr mvkeVKORG mvkeVTWEG maraZZCOEAFE maraZZCOEAFEUOM mvkeZZALLPOL
         into appending corresponding fields of table i_zallocpol from mara inner join mvke on
        mvkematnr = maramatnr
        where MARA~zzobjtype = I_ZZOBJTYPE
          and MVKE~VKORG = i_salesplant-vkorg
          and MVKE~VTWEG = T_VTWEG.
      ENDLOOp.
But it is giving error saying " Field "APPENDING" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement. "
Please suggest.
Thanks,
Chandravadan

Simple select query is taking a lot of time

hi gems...
my table has 7267563 rows...and i am doing a simple select * from table;
but it is taking a lot of time nearly 25minutes but not completed...
when i did select count(1) from table then it gave the result instantly also select * from table where rownum < 10 is also fine...even when i am selecting all the records using rownum i.e. select * from table where rownum < 7267563 is also giving result instantly...
but the entire table is not getting result i.e. select * from table...also there is no lock in the table(though i know that select is nothing to do with lock)..
what may be the issue..please suggest...thanks in advance...
Edited by: user12780416 on Dec 12, 2011 11:08 PM

Hi;
Please see below thread
query takes too long ...
help in solving long run query
HOW TO: Post a SQL statement tuning request - template posting
Hope it helps
Regard
Helios

Swap Counter in simple Selection Sort method

    void sortSelection(List object)
         int swapCount=0;
           for(int i = list.length; i >= 2; i--)
             int maxIndex = 0;
                    for(int j = 1; j < i; j++)
                         if(list[j] > list[maxIndex])
                              maxIndex = j;
               int temp = list[maxIndex];        //
               list[maxIndex] = list[i-1];         //         Is the problem here?
               list[i-1] = temp;                     //
               swapCount++;                     //
          System.out.println("\n" +swapCount+ " swaps were needed. ");
    }This is a pretty simple selection sort method. But I am fairly sure that I am incorrectly counting swaps with the code. I have defined a "swap" as when two array indices have their values switched. I am convinced that there is something wrong because the array of numbers is randomly generated, and yet the swapCount counter is always equal
to (list.length-1) when it prints out. I would think it should be different every time. I indicated the line where I believe the problem lies, but I am not for sure. Thanks everybody.

List of Random Integers, then sorted:
9, 29, 30, 42, 53, 58, 59, 64, 66, 69, 74, 79, 79, 87, 95
9 swaps were needed.then sort again (descending) and get this:
95, 87, 79, 79, 74, 69, 66, 64, 59, 58, 53, 42, 30, 29, 9
1 swaps were needed.I'm pretty sure that isn't correct. But forgive me if I did not specify that it was to work in descending order as well.
So I tried this:
void sortSelection(List object)
         int swapCount=0;
           for(int i = list.length; i >= 2; i--)
             int maxIndex = 0;
                    for(int j = 1; j < i; j++)
                         if(list[j] > list[maxIndex])
                              maxIndex = j;
              if (maxIndex != (i-1) && ascending==true)
                   int temp = list[maxIndex];
                    list[maxIndex] = list[i-1];
                    list[i-1] = temp;
                    swapCount++;
              else if (maxIndex != (i+1) && descending==true)
                   int temp = list[maxIndex];
                    list[maxIndex] = list[i-1];
                    list[i-1] = temp;
                    swapCount++;
} adding the i+1 (because it is going in a different order)...and I think I solved it!

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

Problem in getting parameter value from selection screen in web dynpro abap

Hi,
I am facing problem in getting parameter value from selection screen.
Please find my code below:
DATA LT_PAR_ITEM TYPE IF_WD_SELECT_OPTIONS=>TT_SELECTION_SCREEN_ITEM.
FIELD-SYMBOLS:<FS_PAR_ITEM> LIKE LINE OF LT_PAR_ITEM,
                             <FS_OBJ_USAGE>    TYPE REF TO data.
WD_THIS->M_HANDLER->GET_PARAMETER_FIELDS( IMPORTING ET_FIELDS = LT_PAR_ITEM ).
LOOP AT LT_PAR_ITEM ASSIGNING <FS_PAR_ITEM>.
    CASE <FS_PAR_ITEM>-M_ID.
      WHEN `OBJ_USAGE`.
         ASSIGN <FS_PAR_ITEM>-M_VALUE->* TO <FS_OBJ_USAGE>.
[ Here, sy-subrc is 4, <FS_OBJ_USAGE> is not assigning.]
    ENDCASE.
ENDLOOP.
So, can any one solve this problem.
Thanks in advance,
Radhika

Hi Radhika,
Try using GET_RANGE_TABLE_OF_SEL_FIELD...
Please Refer below code..
   DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
DATA: RT_CARRID TYPE REF TO DATA.
DATA: ISFLIGHT TYPE TABLE OF SFLIGHT.
DATA: WSFLIGHT TYPE SFLIGHT.
FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE.
Retrieve the data from the select option
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Assign it to a field symbol
ASSIGN RT_CARRID->* TO <FS_CARRID>.
CLEAR ISFLIGHT. REFRESH ISFLIGHT.
SELECT * INTO CORRESPONDING FIELDS OF TABLE ISFLIGHT FROM SFLIGHT
                       WHERE CARRID IN <FS_CARRID>.
NODE_FLIGHTS = WD_CONTEXT->GET_CHILD_NODE( NAME = `FLIGHTS` ).
NODE_FLIGHTS->BIND_ELEMENTS( ISFLIGHT ).
Thanks,
Regards,
Kiran

Simple Select statement in MS Access

I am not able to get this simple select statement working in MS Access.
"SELECT PhotoLocation from RfidData WHERE TeamID = '"+teamID ;
It is using a variable called teamID which is a string.
The error is java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression
Please Suggest
Thank You...

Let's look at your code, shall we?
public String readPhotoLoc(String teamID)
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    Connection con = DriverManager.getConnection(dbURL,"","");
    PreparedStatement ps = con.prepareStatement("Select PhotoLocation from RfidData "); // There's no bind parameter here, so setString will do nothing
ps.setString(1,teamID);
ResultSet rs = ps.executeQuery(); // what do you do with the ResultSet? Nothing. //You don't return anything, either. I doubt that this mess even compiles.
}Here's one suggestion for how to write it properly:
public String readPhotoLoc(Connection connection, String teamID)
    String photoLoc = null;
     PreparedStatement ps = null;
     ResultSet rs = null;
    try
        String query = "SELECT PhotoLocation FROM RfidData WHERE TeamID = ?";
        ps = connection.prepareStatement(query);
        ps.setString(1,teamID);
        rs = ps.executeQuery();
        while (rs.next())
            photoLoc = rs.getString("PhotoLocation");
        return photoLoc;
    catch (SQLException e)
          e.printStackTrace();
           return null;
    finally
          try { if (rs != null) rs.close(); } catch (SQLException ignoreOrLogThis) {}
          try { if (ps != null) ps.close(); } catch (SQLException ignoreOrLogThis) {}
}Make sure that the types of the columns match the Java types.
%

Problem with SImple Select Query

Hi
I am trying to write a simple Select SQL to a table and find out whether certain data exist or not. I have done this before but now for some reason this one is not working.
I started like this
select single * from ANLH where ANLN1 = rec-Asset
                                             and BUKRS = Comp_Cd.
* Error Handler for non-existent empno in the database
if sy-subrc = 0 or rec-asset = ''.
     rec_failed = 'T'.
     concatenate 'Asset does not exist' rec-asset into asst_err.
endif.
when i debugged the code i found out that sy-subrc is returning 4 all the time. (i have passes some numbers in rec-Asset which i know doesn't exist in that table.
So i have modified the code to see if its pulling anything.
like this
select single ANLN1 into v_Asset from ANLH where ANLN1 = rec-Asset
                                             and BUKRS = Comp_Cd.
* Error Handler for non-existent empno in the database
if sy-subrc = 0 or rec-asset = ''.
     rec_failed = 'T'.
     concatenate 'Asset does not exist' rec-asset into asst_err.
endif.
in debug v_asset is always empty (for real number and for the madeup number)
Please help.
Thanks
Edited by: Anwarul Kabir on Apr 3, 2008 9:27 PM
Edited by: Anwarul Kabir on Apr 3, 2008 9:29 PM
Edited by: Anwarul Kabir on Apr 3, 2008 9:30 PM

Thanks for the answer. But i thought i was doing the same. Anyway I replaced my code with yours but result is the same. I also did this
select single
ANLN1 into v_Asset
from ANLH where
ANLN1 = '20000544'
and BUKRS = '3000'.
I did SE11 and entered the table name and i can see that data.
but on my code i get sy-subrc=4 and v_Asset is blank
again i tried with this madeup number which i know its not in the table
select single
ANLN1 into v_Asset
from ANLH where
ANLN1 = '2056555433544'
and BUKRS = '3000'.
Get sy-subrc=4 and v_Asset is blank...
Is there anything special about the Table?

Getting result of dynamic select statement into variable

I have a function that builds a dynamic sql statement. I then want to take the result of that statement and insert it into a variable. I have tried this
execute immediate strSQL USING OUT intCounter;but that is giving me an error on that line of code. The SQL is a select count(*) and works fine. It is just how to get it into the variable that is tripping me up.
Thanks,
Eva

Sure. Version 11g. The complete procedure reads as follows:
CREATE OR REPLACE FUNCTION VALIDATIONQUESTIONRESULT
    p_ShortName VARCHAR2,
    p_SiteID    VARCHAR2
RETURN NUMBER IS
    strSQL VARCHAR2(5000);
    strTableName VARCHAR2(200);
    strPatIDFieldName VARCHAR2(200);
    intCounter NUMBER;
BEGIN
    select VALIDATIONSQL into strSQL from vwvalidationquestions where upper(shortname) = upper(p_ShortName);
    select
            case UPPER(DBTABLENAME)
                when 'CPTICODES' then 'CPTIPATID'
                when 'CPTIICODES' then 'CPTIIPATID'
                when 'DEMOGRAPHICS' then 'PATID'
                when 'FAMILYHISTORY' then 'FHPATID'
                when 'GCODES' then 'GCODEPATID'
                when 'HOSPITALIZATION' then 'HPATID'
                when 'MEDICALHISTORY' then 'MHPATID'
                when 'MEDICATIONS' then 'MPATID'
                when 'PROCEDURES' then 'PPATID'
                when 'VISITS' then 'VPATID' end into strPatIDFieldName
    from DATASPECIFICATIONS where UPPER(SHORTNAME) = UPPER(p_ShortName);
    strSQL := strSQL||' and '||strPatIDFieldName||' in (select PATID from DEMOGRAPHICS where PARTICID = '||p_SiteID||');';
    execute immediate strSQL into intCounter;
    return intCounter;
END VALIDATIONQUESTIONRESULT; strSQL when checked builds perfectly. I get 100% what I expect from it. An example of what I am getting from strSQL is:
select count(*) from Procedures where TO_CHAR(ProcdDt, 'MM') = TO_CHAR(ADD_MONTHS(SYSDATE, -1), 'MM') and TO_CHAR(ProcdDt, 'YYYY') = TO_CHAR(ADD_MONTHS(SYSDATE, -12), 'YYYY') and PPATID in (select PATID from DEMOGRAPHICS where PARTICID = 12);I am getting the number I would expect from this. I just need to put that number into intCounter. I tried altering strSQL so it looked like this:
select count(*) into intCounter from Procedures where TO_CHAR(ProcdDt, 'MM') = TO_CHAR(ADD_MONTHS(SYSDATE, -1), 'MM') and TO_CHAR(ProcdDt, 'YYYY') = TO_CHAR(ADD_MONTHS(SYSDATE, -12), 'YYYY') and PPATID in (select PATID from DEMOGRAPHICS where PARTICID = 12);but that gave me an error on the execute immediate line as well.
Sorry, I thought it would be simple so that was why I only put that bit of info. I guess it is more complicated than it at first appeared!
Eva

Simple Select Query Taking 5-10s

We have a web server on the same lan as the DB server.
A simple select * from tablename (~100 entries) is taking
anywhere from 30ms to 10 seconds lan. ASP code on the web server
provides instant (30ms) queries. Ping is never <1ms. If I point
to a remote DB server, the same query is never more than 300ms
(which is great for over the internet).
I enabled logging in CFAdmin -> Datasources and shortly
after my select * from tablename I see this:
spy(2009/02/28 16:39:00.539)>>
Connection[2].setReadOnly(boolean readOnly)
spy(2009/02/28 16:39:00.539)>> readOnly = false
spy(2009/02/28 16:39:00.539)>> OK
spy(2009/02/28 16:39:05.726)>> OK (true)
We need to get this up and running ASAP. Please help!!

> I'm connecting to SQL Server 2000 on a Win2k3 box.
> The default CF8 Installation.
> Every table this happens for.
OK. I think CF8 runs the most recent JDBC drivers too. It
might pay to
check that though.
> Select * is needed, because we have existing sites we
are migrating a lot of
> which use select *.
Sure. But just for the purposes of experimentation, change
your test code
to specify columns to see if it makes any difference.
It might pay to get hold of FusionReactor to check what CF is
doing with
the queries, under the hood.
Adam

IDoc-Inbound: Partner Number gets overwritten in User Exit

Hi,
we have problem that XI won't accept IDoc from sending R/3 because the Partner number gets overwritten via User Exit.
Instead of Partner PSICLNT010 the partner gets overwritten to SAPPSI. So what do i have to do to make XI accaept this IDoc?!
We have system PSICLNT010 configured in SLD with logical system name PSICLNT010.
Because of the problem i changed it to SAPPSI.
I also refreshed the adapter specific identifiers and did a complete cache refesh - but with no success.
We still get error "No service for system SAPPSI, client 010 in ID"
Can somebody help! What elso do i have to change?!
br

Hi,
This problem can be solved : do these steps ,
AT your XI System : goto Idx1, create port with name : SAPPSI
In the port use your RFC Destination name SAME as used in port PSICLNT010.
Now goto idx2
upload matadata for your idoc Message in port SAPPSI.
send idoc from R/3, XI system will pick that idoc.
your problem is solved now
Regards,
Sandeep Kaushik

How to excecute simple select using EntityManager

Hello I am developing a project using Seam, JSF, EJB and JBoss.
All the mappings to the database are correctly done.
However I would like to create a simple select that retrieves the maximum value of the id.
This is how I thought I could do it.
Query q = em.createNativeQuery("select max(id)", Project.class);
But it keeps telling me that column id cannot be found.
Am I writing something wrong?

Ok, this is how I solved it.
Query q = em.createQuery("select max(id) from " + Project.class.getName());
Changed it to createQuery and class.getName

A setting in visual administrator gets overwritten when a developer publish

Hello
Due to problems with logon groups a SAP consultant told me to uncheck "Add Application Cookie" and "Add Session Cookie" in Visual Administrator -> Cluster -> Server -> Services -> Web Container -> sap.com/home~[my app] -> View -> Main -> "Cookie Configuration". This works fine and solves that problem but instead I get a new one. Every time a developer publish something my setting gets overwritten and I need to uncheck it again, save and then restart the j2ee engine again to make it work.
I can not get in touch with this consultant again (he don't answer any email) and not anyone on my company knows how to set it permanent so I hope any of you know how to set this permanently so I don't have to do this every time a developer does something new.
I use NW 7.0 with patchlevel 109044.44 on HP-UX with IA64. I have the same problem on every server.
Thank you in advance!
Br Linus Hellsing

Hello again
We have solved this problem thanks to an employee at my company. The problem was that we didnt have any file called web-j2ee-engine.xml so we created this and set a couple of options in the developers program and then it worked.
Br Linus Hellsing

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

jamestait wrote:
when I record, my previous track data keeps getting overwritten.
since you didn't specify, are you recording in a single take?
http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
(Let the page FULLY load. The link to your answer is at the top of your screen)

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone?

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?

I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

[SOLVED] Clipboard gets overwritten on simple selection

Similar Messages

Maybe you are looking for