[solved]Compile kernel from aur consumes time than from source?

With my box from source take 1-1,5 minutes and from aur take ~1h, anyone can explain this situation? thanks.
Last edited by angelfalls (2012-11-12 02:59:25)

tks falconindy, i will look into it later.

Similar Messages

[SOLVED]Compiling kernel fails with segfault

Hi guys,
I'm out of answers.
The situation :
Compiling kernel randomly stops with : "segmentation fault" and never runs through.
Reissuing make will make it continue until it will fail at some other point.
Background:
The system feels completely unstable to say the least, but nothing 100 % reproduceable ( vuze(java) crash, firefox/chromuim flash sites crash every 120 seconds, X crashes once a day , for instance when moving tvtime around, kernel oops daily, sometimes hard lockups, logs of yesterdays oops : http://pastie.org/private/imrqdzdbejdb3jxn4czuw )
But only the kernel compile is 100 % reproduceable so this must be fixed asap.
Specs:
intel e8400,nvidia gtx260, 2 G ddr2,Gigabyte EP45-UD3R, "gigs of space", off. arch kernel 2.6.33-ARCH , x86_64, "bigtime" cooling :
cpu temps 50 C° max during compiling
What configs/packages are important ? I got paranoid and ditched my old makgepkg.conf and used a newer *.pacnew file , I used to have :MAKEFLAGS="-j3" but not in this config :
http://pastie.org/private/4ryshivi2hgyqenjlkicg
local packages:
local/gcc 4.5.0-1 (base-devel)
The GNU Compiler Collection
local/gcc-libs 4.5.0-1 (base)
Runtime libraries shipped by GCC for C and C++ languages
Anything else updated daily.
The blowup:
http://pastie.org/private/hoamev0sli7zapbr0xvpbq
What I tried:
fsck -f: it fixed two inodes, but still the same behavior
badblocks -nvs : three hours of badblock testing, 0 hits
memtest : two passed runs, no errors
stress from AUR, 15 minutes :
stress --cpu 8 --io 4 --vm 2 --vm-bytes 128M --timeout 15m
stress: info: [26841] dispatching hogs: 8 cpu, 4 io, 2 vm, 0 hdd
stress: info: [26841] successful run completed in 900s
Max coretemp was 52 C° during stress.
The usual footnote statement ^_^ :
On w7 _everything_ runs stable.
And not only stable , I'm able to OC this box to 4.5 GHz and game under w7 without a prop for hours, well this is what it was build for at some point.
Conclusion:
So I'd say hardware wise this box kicks ass and now software wise my Arch kicks me in the a**.
I doubt there is a faulty hardware part, but what else could it be ?
Last edited by tuxfusion (2010-05-17 22:48:06)

Update:
Trying to compile another big package just to have another result, gcc itself now :
- segfault after 4 m18 s
- segfault after 5 m50 s
Update²:
I think I found a faulty BIOS setting in my non-OC profile concerning DRAM termination, which said "normal" where "auto" would be correct.
My OC-profile has this setting correct and since I run this profile in Arch only it might explain that w7 did not fail.
Still have to verify this but i makes perfect sense, only gcc seems to trigger this. Compiling gcc still running with over 10 minutes in the game now.
After hitting 4.5 GHz with OC I must have reset the non OC-profile wrong.
*slams head on desk*
Last edited by tuxfusion (2010-05-17 13:10:04)

Is installing from AUR similar to install from source?

I wonder if installing applications from AUR is similar to installing from source? Recently I have a problem where Eclipse SWT embeded browser is broken and 1 solution is installing firefox from source. So I wonder if installing from AUR is similar as installing from source?
StackOverflow question about broken SWT Browser

You may also be interested in ABS. ABS is the official build system for Arch. Things supported by Developers go into Core and Extra, things supported by trusted users go into community. To get the packages for the extra (which is where firefox lives), install and run (as root) abs. Then the build stuff for firefox will live at /var/abs/extra/firefox
ewaller@odin:/var/abs/extra/firefox 1021 %ls
firefox.desktop firefox.install firefox-install-dir.patch libvpx.patch mozconfig PKGBUILD vendor.js
Looking at the PKGBUILD, that package does compile from source. Copy the directory to a user directory, enter that directory, and you can build your own copy with makepkg. You can then install the package with pacman -U
If you need to change something, change the files in your local copy.
This is not that tough, but it is most definitively not a project for a beginner. The documentation you need is out there, you will need to do your research.

In Mountain Lion how to keep Dashboard from opening each time awakening from sleep?

Every time awakening from sleep and/or screen saver, the dashboard screen comes up as the opening display, how can I stop this?

Nope.
If you launch Mail, you get mail.
You can only stop if from loading if your DON'T launch Mail.
You can also decide how much to have it load, and how far back.
The other option is to turn off Wifi before you launch Mail.
Scott

[SOLVED] Compiling kernel PKGBUILD from ABS (2.6.34)

So I'm currently compiling a kernel from ABS, and its been running som docbook stuff for 2-3 hours now which I've never seen before when compiling a kernel with ABS.
I commented out the line that allowed me to edit the config with make menuconfig. I tweaked the kernel to 1000hz and set up my cpu family.
Is this normal? Im pretty sure this didnt happen when I compiled 2.6.33.4 from ABS
This is what its been spamming for the past ~2 hours:
Note: Writing struct_usb_host_ss_ep_comp.9
Warn: meta author : no refentry/info/author struct usb_host_endpoint
Note: meta author : see http://docbook.sf.net/el/author struct usb_host_endpoint
Warn: meta author : no author data, so inserted a fixme struct usb_host_endpoint
Note: Writing struct_usb_host_endpoint.9
Warn: meta author : no refentry/info/author struct usb_interface
Note: meta author : see http://docbook.sf.net/el/author struct usb_interface
Warn: meta author : no author data, so inserted a fixme struct usb_interface
Note: Writing struct_usb_interface.9
Warn: meta author : no refentry/info/author struct usb_interface_cache
Note: meta author : see http://docbook.sf.net/el/author struct usb_interface_cache
Warn: meta author : no author data, so inserted a fixme struct usb_interface_cache
Last edited by XAM (2010-06-29 06:19:50)

Coacher wrote:Since 2.6.34 there is also kernel26-manpages and kernel26-docs packages that also placed in kernel26 PKGBUILD.
I've never compiled that docs stuff for myself so cant say how long it takes, but if you need only new kernel26 package you can safely wipe out that lines from PKGBUILD.
wow, thats good to hear. Took ages compiling with it there.

Connection through jdbc thin client taking more time than from sqlplus!!!

Hello All
Machines A and B
Applicaion in A is connecting to B(9.2.0.6),db server.
The schema is so small with few tables and data in each table less than 500 rows
We are in the process of migrating the Application Schema in B to C[9.2.0.8].
But the response time is more when the application fetches from C.
Even while selecting the sysdate from dual.
The application is using the jdbc thin client for fetching the data.
When the same sql is executed by (from A to C)
sqlplus -s user/pass @execute.sql, its gets done in a fraction of a second.
But when the same is done through the application which uses jdbc thin client, it takes few seconds
to complete.
When tried with a small java program that uses classes12.jar (from A to C)
conn = DriverManager.getConnection(URL,UID,PASS);
               stop = System.currentTimeMillis();
               System.out.println("Connection time in milli sec: " + (stop - start));
               System.out.println();
..It was found that creating the connection was taking time.
But the same is not happening when tired through the sqlplus
Could someone throw some light into this?
What could be the reason for jdbc to get slower while establishing connections?
TIA,
JJ

are you using latest drivers - http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
you may want to check some options reducing jdbc connection cost from the otn samples - http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/index.html

[Solved] Compiling kernel with 'localmodcfg' - 'brcmsmac' missing

Hi all,
I want to compile my own optimized ck-kernel with localmodcfg="y" which works mostly.
However there is a small problem.
The module 'brcmsmac' for the WLAN card is never included although it is listed in my modprobed.db.
Does someone have any clue what could be the cause?
Thanks
Radioactiveman
Last edited by Radioactiveman (2012-01-13 16:36:15)

A minor fix for the patch by Steven Rostedt solved my issue.
I have compiled linux-ck 3.2.1-2 with localmodconfig today and brcmsmac is now included.
Marking the thread as solved, thanks to Steve.
Patch file:
diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl
index ec7afce..bccf07d 100644
--- a/scripts/kconfig/streamline_config.pl
+++ b/scripts/kconfig/streamline_config.pl
@@ -250,33 +250,61 @@ if ($kconfig) {
read_kconfig($kconfig);
+sub convert_vars {
+ my ($line, %vars) = @_;
+
+ my $process = "";
+
+ while ($line =~ s/^(.*?)(\$$(.*?)$)//) {
+ my $start = $1;
+ my $variable = $2;
+ my $var = $3;
+
+ if (defined($vars{$var})) {
+ $process .= $start . $vars{$var};
+ } else {
+ $process .= $start . $variable;
+ }
+ }
+
+ $process .= $line;
+
+ return $process;
+}
+
# Read all Makefiles to map the configs to the objects
foreach my $makefile (@makefiles) {
- my $cont = 0;
+ my $line = "";
+ my %make_vars;
open(MIN,$makefile) || die "Can't open $makefile";
while (<MIN>) {
+ # if this line ends with a backslash, continue
+ chomp;
+ if (/^(.*)\\$/) {
+ $line .= $1;
+ next;
+ }
+
+ $line .= $_;
+ $_ = $line;
+ $line = "";
+
my $objs;
- # is this a line after a line with a backslash?
- if ($cont && /(\S.*)$/) {
- $objs = $1;
- $cont = 0;
+ $_ = convert_vars($_, %make_vars);
# collect objects after obj-$(CONFIG_FOO_BAR)
if (/obj-\$$(CONFIG_[^$]*)\)\s*[+:]?=\s*(.*)/) {
$var = $1;
$objs = $2;
+
+ # check if variables are set
+ } elsif (/^\s*(\S+)\s*[:]?=\s*(.*\S)/) {
+ $make_vars{$1} = $2;
if (defined($objs)) {
- # test if the line ends with a backslash
- if ($objs =~ m,(.*)\\$,) {
- $objs = $1;
- $cont = 1;
foreach my $obj (split /\s+/,$objs) {
$obj =~ s/-/_/g;
if ($obj =~ /(.*)\.o$/) {
Last edited by Radioactiveman (2012-01-13 16:37:06)

Making songs start from a later time than the beginning

Okay, so on a few songs (Holy Diver by Dio, Indestructible by Disturbed) I have the options set to start the song when the ambience stops, because when I'm in my car I don't care to listen to more than 5 seconds of near silence before (or after) a song ends.
The two I listed work fine when synced with my iPod. However, when I play "Child of Burning Time" by Slipknot, for some reason it doesn't sync correctly. It'll start about 2-3 seconds after the time I set so it sounds like it just starts in the middle of the intro (on iPod/iPhone only. It's fine in iTunes).
Is there a way to fix it and make it sync correctly? It's not a huge problem, just kind of annoying when I spent the time to time it down to a hundreth of a second for the precise time I want it to start.

Turns out I had a bad rip or something. I ripped it off the CD and it came out just fine this time.

Q#2. FLV from localhost much worse than from remote

I have a strange situation #2:
I need to watch streaming video (or clips) from Windows
machine where “Flash Media Server 2” is running.
I grabbed an example from “Creating a Dynamic Playlist
for Streaming Flash Video”
http://www.macromedia.com/devnet/flash/articles/video_player.html
unzipped and run original application , and everything was
excellent!
Then I redirected half of XML-file links from
“rtmp://www.ifoxremote.com/videosource/fish.flv”
for example,
to my localhost :
“rtmp://localhost/videosource/fish.flv” where
“Flash Media Server 2” server is running and
videosource is active.
When I clicked on my local clip from the list nothing
happened for a very looong time – about 5-10 min, and than
clip finally started and run for about 10 second, and freezes
again.
However all remote clips are still running well.
Ok, may be Server is slow? No, I’d used online
somebody's video player from far-far-away, and surprisingly it
worked excellent with both remote and my local “.flv”
files.
Original code was not touched at all.
I tried to run from attached hml files and using Flash
Professional 8 as well (all security issues were resolved on my
business machine).
Strangely replacement of FLVPlayer by "basic video object"
works fine for any rtmp streams
so everything is playing and is selectable.
Problem is that I HAVE TO use FLVPlayer :-((
Does anybody have any idea?

Oh, I forgot to mention that the MAC is using CS5 and the PC that gives the better FLVs is using CS3. So, the older version of the Media Encoder is doing the better job.

[SOLVED] install package from aur via yaourt

Hi,
i installed yaourt and tried to install from the aur.
it keeps asking me to continue bulding and then restart building. it just wont install any packages.
for none-aur packages it works fine btw.
any help?
alex
Last edited by alext (2011-10-11 23:13:53)

me too and it didnt.
[xxx@xxx pcmanfm-mod]$ yaourt ntfs-config
1 aur/ntfs-config 1.0.1-7 (200)
Enable/disable NTFS write support with a simple click
==> Enter n° of packages to be installed (ex: 1 2 3 or 1-3)
==> -------------------------------------------------------
==> 1
==> Downloading ntfs-config PKGBUILD from AUR...
x PKGBUILD
x python-2.7.patch
Comment by: loleg on Sat, 25 Jun 2011 10:07:14 +0000
Compiles installs OK using yaourt, however does not work on my up-to-date system with the issue discussed here: http://ubuntuforums.org/archive/index.php/t-1497399.html
Comment by: jlcordeiro on Mon, 27 Jun 2011 08:56:12 +0000
Can you check if:
sudo mkdir /etc/hal/fdi
sudo touch /etc/hal/fdi/policy
solves the problem?
Comment by: mr430 on Tue, 04 Oct 2011 15:56:44 +0000
jlcordeiro, same problem and making /etc/hal/fdi directory solve it, thanks
Comment by: jlcordeiro on Sat, 08 Oct 2011 08:17:08 +0000
Updated with the solution to the mentioned problem.
Comment by: archdria on Tue, 11 Oct 2011 12:04:43 +0000
Please, add perl-xml-parser as makedep :)
Comment by: jlcordeiro on Tue, 11 Oct 2011 21:36:05 +0000
Done. Thank you :)
First Submitted: Fri, 19 Jan 2007 21:10:44 +0000
ntfs-config 1.0.1-7
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> ntfs-config dependencies:
- python2 (already installed)
- pygtk (already installed)
- udev (already installed)
- ntfs-3g (already installed)
- perl-xml-parser (already installed)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'testing' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'core' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'extra' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'community-testing' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'community' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'multilib' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
==> Continue building ntfs-config ? [Y/n]
==> -------------------------------------
==>
==> Building and installing package
==> Install or build missing dependencies for ntfs-config:
Password:
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'testing' not recognized.
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'core' not recognized.
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'extra' not recognized.
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'community-testing' not recognized.
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'community' not recognized.
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'multilib' not recognized.
error: target not found: recognized.
==> Restart building ntfs-config ? [y/N]
==> ------------------------------------
==>
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> ntfs-config dependencies:
- python2 (already installed)
- pygtk (already installed)
- udev (already installed)
- ntfs-3g (already installed)
- perl-xml-parser (already installed)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'testing' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'core' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'extra' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'community-testing' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'community' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
- warning: (building from AUR)
- config (building from AUR)
- file (package found)
- /etc/pacman.d/mirrorlist, (building from AUR)
- line (building from AUR)
- 82: (building from AUR)
- directive (building from AUR)
- 'Germany' (building from AUR)
- in (building from AUR)
- section (building from AUR)
- 'multilib' (building from AUR)
- not (building from AUR)
- recognized. (building from AUR)
==> Continue building ntfs-config ? [Y/n]
==> -------------------------------------
==>
==> Building and installing package
==> Install or build missing dependencies for ntfs-config:
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'testing' not recognized.
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'core' not recognized.
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'extra' not recognized.
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'community-testing' not recognized.
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'community' not recognized.
warning: config file /etc/pacman.d/mirrorlist, line 82: directive 'Germany' in section 'multilib' not recognized.
error: target not found: recognized.
==> Restart building ntfs-config ? [y/N]
==> ------------------------------------
==>
==> WARNING: Following packages have not been installed:
ntfs-config
Edit: now ive just seen that i forgot about the warnings. i am not sure about what they mean and how to fix it.
Last edited by alext (2011-10-11 22:16:58)

[SOLVED]yaourt wants to build dependencies from AUR

Hi,
I've installed kdemod4... the only problem is that yaourt wants ti install all the dependences of the package(s) i've choose from aur, altough dependencies are present in extra (correct version). How can i solve this??
An example is:
cairo-lcd: i have to build all the dependencies from aur, like libpng,etc; but i see from PKGBUILD that the version that needs cairo-lcd is present in extra repository...
thanks in advance
Last edited by chesterfork (2009-07-13 10:07:26)

..i'm running kdemod 4 x86_64...so if i try install everything using yaourt the dependencies are shown in this way:
==> lib32-cairo-lcd dependencies:
- lib32-gcc-libs (building from AUR)
- lib32-libpng (building from AUR)
- lib32-libxrender (building from AUR)
- lib32-fontconfig (building from AUR)
- lib32-pixman (building from AUR)
- lib32-xcb-util (building from AUR)
if it could help i found this:
chesterfork ~ $ yaourt -S lib32-cairo
lib32-cairo not found on AUR
Packages that were installed as dependencies but are no longer required by any installed package:
error:
what about the error? it's a blank line.... i checked yaourtrc in /etc but it seems ok..
It's happen even if i have these packages installed (and checking in pkg build they have are the same version). EVERYTIME yaourt shows that; cairo, cairo-lcd, bin32-skype-lib32-cairo-lcd....eveything i tried it needs dependencies from aur ONLY. That's the problem....there is a solution??

[SOLVED] Can't compile tupi-git or Ktoon from AUR - hardware failure

EDIT: Tupi-git compiles fine, just not on my main desktop. the machine, has some nasty hardware problems, caused by a lightning storm/power failure a few weeks ago .
it appears, the CMOS is damaged (clock skew and other problems), and that the motherboard also has problems (NMI interrupt handler warning, as well as CPU damage, fun).
it's time to buy some new hardware, i guess.
Hi everyone,
I am having a strange issue. I have been using Tupi-git, for a while - but the other day i went to re-compile it, and now it won't build. it's interesting because i have been able to compile Tupi-git in the past, no problem. i've also tried compiling it manually from git too.
I am running gnome3 and tupi / ktoon shouldn't have much dependencies to KDE itself (as i said i have compiled Tupi before. I tried to compile Ktoon, thinking it might pull in a dependency i had missed or something, but no dice... I've even chatted with the Tupi developer about it, he even installed Arch and was able to get it to compile...
however, he is using KDE, so i am wondering if their is some mysterious dependency (although i did try installing kdebase, but it made no difference). my main concern is tupi / not so much ktoon - but i mention ktoon because Tupi is a fork of it.
I'm at a loss as to what is stopping it, i had thought maybe a linker is missing somewhere, or it can't find a header / library.
it fails here:
lavformat -laspell -ltupifwgui -ltupifwcore -ltupifwsound -lz -lQtSvg -lQtXml -lQtOpenGL -lQtGui -lQtNetwork -lQtCore -lGLU -lGL -lpthread
../../src/components/paintarea/libpaintarea.a(ktviewdocument.o): In function `KTViewDocument::setSpaceContext()':
ktviewdocument.cpp:(.text+0x4a96): undefined reference to `KTProject::updateSpaceContext(KTProject::Mode)'
ktviewdocument.cpp:(.text+0x4b26): undefined reference to `KTProject::updateSpaceContext(KTProject::Mode)'
../../src/components/paintarea/libpaintarea.a(ktpaintarea.o): In function `KTPaintArea::frameResponse(KTFrameResponse*)':
ktpaintarea.cpp:(.text+0xb6b): undefined reference to `KTGraphicsScene::frameResponse(KTFrameResponse*)'
../../src/components/paintarea/libpaintarea.a(ktpaintarea.o): In function `KTPaintArea::sceneResponse(KTSceneResponse*)':
ktpaintarea.cpp:(.text+0x112f): undefined reference to `KTGraphicsScene::sceneResponse(KTSceneResponse*)'
../../src/components/paintarea/libpaintarea.a(ktpaintarea.o): In function `KTPaintArea::layerResponse(KTLayerResponse*)':
ktpaintarea.cpp:(.text+0x333f): undefined reference to `KTGraphicsScene::layerResponse(KTLayerResponse*)'
collect2: ld returned 1 exit status
make[2]: *** [../../bin/tupi.bin] Error 1
make[2]: Leaving directory `/home/ninez/Desktop/tupi/src/shell'
make[1]: *** [sub-shell-make_default] Error 2
make[1]: Leaving directory `/home/ninez/Desktop/tupi/src'
make: *** [sub-src-make_default] Error 2
and i have log files from but './configure' and the full output of 'make', over here (at pastebin):
http://pastebin.com/Mbf8Ck2s ( ./configure logs)
http://pastebin.com/4iVbbSgF ( make logs )
I would appreciate any help, i have been trying to figure this out for a few days, but am not much of a programmer. in fact, i am supposed to be doing some translations and icon sets / themes for Tupi: Magia 2d .. but this is hindering my ability to do so...
thanks in advance
Last edited by triplesquarednine (2011-07-16 18:21:20)

graysky wrote:Try building one of them in a clean chroot.
Will try.
Finally got this working:
Please add V=1 to the make command on line 89 and rebuild with MAKEFLAGS="-j1" to get verbose output.
make -f ./scripts/Makefile.build obj=scripts/genksyms
[...snip...]
gcc -Wp,-MD,scripts/mod/.empty.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-unknown-linux-gnu/4.9.2/include -I./arch/x86/include -Iarch/x86/include/generated -Iinclude -I./arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m64 -mno-80387 -mno-fp-ret-in-387 -march=native -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -DCONFIG_X86_X32_ABI -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_FXSAVEQ=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=2048 -fstack-protector-strong -Wno-unused-but-set-variable -fno-var-tracking-assignments -pg -mfentry -DCC_USING_FENTRY -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -DCC_HAVE_ASM_GOTO -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(empty)" -D"KBUILD_MODNAME=KBUILD_STR(empty)" -c -o scripts/mod/.tmp_empty.o scripts/mod/empty.c
scripts/mod/empty.c:1:0: error: code model kernel does not support PIC mode
/* empty file to figure out endianness / word size */
^
scripts/Makefile.build:257: recipe for target 'scripts/mod/empty.o' failed
Last edited by quequotion (2015-02-04 13:40:15)

[SOLVED] Can't compile hdjmod and hdjcpl from AUR.

Hello,
I've bought a Hercules DJ Console MK2, and I would like to use it with Mixxx.
It doesn't seem to be recognized by Mixxx, probably because no drivers are installed.
So I decide to install hdjmod from AUR.
It also gets hdjcpl (dependency), but while compiling, it fails.
Here's the error message :
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c ghelpers.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gbutton.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gcheckbox.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gcombobox.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gslider.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gstatic.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps g++ -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -c gstatictext.cpp
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
../../wxWidgets-2.8.10/buildgtk/bk-deps gcc -I../../wxWidgets-2.8.10/buildgtk/lib/wx/include/gtk2-ansi-release-static-2.8 -I../../wxWidgets-2.8.10/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/pixman-1 -D_FORTIFY_SOURCE=0 -D__WXGTK__ -DENABLE_BINRELOC -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -c binreloc.c
basename: missing operand
Try `basename --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
../../wxWidgets-2.8.10/buildgtk/bk-deps: line 46: /.deps/.d: Permission denied
g++ -D_FORTIFY_SOURCE=0 -DWX_PRECOMP -pthread -Wall -Wundef -Wno-ctor-dtor-privacy -O2 -fno-strict-aliasing -pthread -o hdjcpl hdjcpl.o alsainterface.o bulkinterface.o drivernotification.o hidnotification.o dmanager.o localization.o devnulldlg.o devdjcdlg.o devmk2dlg.o devmp3dlg.o devrmxdlg.o devsteeldlg.o gcontrol.o gdialog.o ghelpers.o gbutton.o gcheckbox.o gcombobox.o gslider.o gstatic.o gstatictext.o binreloc.o -L../../wxWidgets-2.8.10/buildgtk/lib -lz -lm -lasound -pthread -lSM -lgtk-x11-2.0 -lgthread-2.0 -lglib-2.0 -lwx_gtk2_adv-2.8 -lwx_gtk2_core-2.8 -lwx_base-2.8 -lwxpng-2.8
../../wxWidgets-2.8.10/buildgtk/lib/libwx_gtk2_core-2.8.a(corelib_displayx11.o): In function `wxDisplayImplX11::ChangeMode(wxVideoMode const&)':
displayx11.cpp:(.text+0x20f): undefined reference to `XF86VidModeGetAllModeLines'
displayx11.cpp:(.text+0x2f1): undefined reference to `XF86VidModeSwitchToMode'
displayx11.cpp:(.text+0x3bd): undefined reference to `XF86VidModeSwitchToMode'
../../wxWidgets-2.8.10/buildgtk/lib/libwx_gtk2_core-2.8.a(corelib_displayx11.o): In function `wxDisplayImplX11::GetCurrentMode() const':
displayx11.cpp:(.text+0x462): undefined reference to `XF86VidModeGetModeLine'
../../wxWidgets-2.8.10/buildgtk/lib/libwx_gtk2_core-2.8.a(corelib_displayx11.o): In function `wxDisplayImplX11::GetModes(wxVideoMode const&) const':
displayx11.cpp:(.text+0x6b7): undefined reference to `XF86VidModeGetAllModeLines'
collect2: ld returned 1 exit status
make[2]: *** [hdjcpl] Error 1
make[2]: Leaving directory `/tmp/yaourt-tmp-alex/aur-hdjcpl/hdjcpl/src/hdjcpl-1.09/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/yaourt-tmp-alex/aur-hdjcpl/hdjcpl/src/hdjcpl-1.09'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build hdjcpl package.
Do you have any idea about the reason I got this error ?
What are the prerequisite to install these drivers (I mean, is there any other dependency that isn't asked in the PKGBUILD ?) ?
Sorry for my bad english.
Thanks for future answers.
skYzer
Last edited by skYzer (2009-09-23 10:32:20)

Welcome to the forum skYzer!
makepkg can show you if there are some dependencies that you didn't installed, and makepkg with -s option does it for you automatically, so it installs all the dependencies.
If the author missed this dependencies from the PKGBUILD, you can see on the url address in the PKGBUILD (so on the author site) what do they write about dependencies, in last case try it manually, and see config.log, or similar outputs.
Btw, it can be built by me without any problem.
Last case you could build it manually, without using fakeroot environment, and the PKGBUILD from maintainer.

Compiling gstreamer0.10-pitfdll-cvs from AUR [SOLVED]

I am trying to compile the pitfdll plugin for gstreamer0.10 with the PKGBUILD from AUR:
http://aur.archlinux.org/packages.php?d … s=0&SeB=nd
The build fails duirng the configure stage. I am not sitting in front of my workstation now, and can't quote the exact error at the moment. It basically can't parse the produced configure script produced by autoconf.
Has anyone had success compiling it recently?
Thanks in advance

that package has no use: the pitfdll code hasn't been touched since we packaged it, so the official package is the same as the CVS version.

[SOLVED] How to install custom kernel from AUR?

I am trying to install the custom kernel for the Acer Aspire One from AUR. What is the correct way to go about doing this? I pacman -U the .pkg.tar.gz I downloaded and it put a new kernel folder in /usr/src. Do I just copy the old .config file and make?
Last edited by future stir-fry (2008-12-23 01:26:57)

zaza224 wrote:
After installing new kernel with pacman -U you just need to add a new line to grub menu.lst pointing to it and reboot
How would you go about doing this in syslinux instead of grub?
Whoa there, get your shotguns, the zombies are coming!!
Seriously, welcome to the Arch forums zaza224
Please familiarize yourself with our forum guidelines, in particular the topic about waking the dead:
https://wiki.archlinux.org/index.php/Fo … Bumping.22
Closing.

[solved]Compile kernel from aur consumes time than from source?

Similar Messages

Maybe you are looking for