[SOLVED] is it possible to use Super by itself as the prefix key?

Hi, just got through my first arch installation and I'm setting up StumpWM. I've been trying to set the super key as the sole prefix key, without success so far.
edit: this is what I've tried:
//in shell
xmodmap -e 'keycode 133 = F20'
//in stumpwm eval mode
(stumpwm:set-prefix-key (stumpwm:kbd "F20"))
it seems to accept the commands but doesn't want to go into prefix mode, and xev confirms that the super key is returning F20. What am I doing wrong?
edit2: stupid, stupid me, I forgot to clear Super_L from mod4, which seemed to conflict with the F20 binding. It works!
Last edited by spotty (2010-06-07 15:52:34)

There have been a few threads about this, and its also covered in the wiki.
Please search both the forum and the wiki before posting.

Similar Messages

Is it possible to use super domain account in the server to remove the file's irm setting when I upload a irm-enabled file?

We often need to send files downloaded from irm-enabled libraries of sharepoint to our clients who have no access to our rms server enviroment via e-mail or OA. Now we have to remove these files' irm setting mannually using the account who
have overall control rights to this files, and then send these files to our cilent via email or OA (Upload to OA and use OA's delivery system). I want to know is it possible to automatically remove irm setting when uploading files to OA.

Hello Tolab,
I'd suggest asking SharePoint specific questions on the
SharePoint 2013 - Development and Programming forum instead.

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

Is it possible to use different iOS devices with the same account of the gamecenter?

Is it possible to use different iOS devices with the same account of the gamecenter? in that case, can two people play a game with the same account and add both scores to the same leaderboard nickname?

You should be able to use the same account. The top scores will get updated on the leader board.
Taz

Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?

Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?

In Jabber for Windows 10.6, you can change the ring tones.

I want to use my wifi iPad for navigation but now realise it doesn't have gps built in. Is it possible to use hot spot to get the gps location to my iPad from my iphone? Long shot I know!

I want to use my wifi iPad for navigation but now realise it doesn't have gps built in. Is it possible to use hot spot to get the gps location to my iPad from my iphone? Long shot I know!

I thought yes, more like this on the right says no. Why not take the two devices outside and try.

Is it possible to use a USB aircard on the 11" MacBook?

Is it possible to use a USB aircard on the 11" MacBook Air?

No, the superdrive works only with Mac that don't have an optical superdrive built in in the first place.
However, if you have a newer Mac that could support the SuperDrive or another computer (Mac or PC) which has an optical drive, you could use this: DVD or CD sharing: Using Remote Disc - Apple Support

It is possible to use jmf without to install the JMF library?

Hello it is possible to use jmf without to install the JMF library
in windows or linux machine
but inserting these library in a jar for java web start?
thanks

I have have inserted the library in the my files jar but i have this error
java.lang.UnsatisfiedLinkError: JMFSecurityManager: java.lang.UnsatisfiedLinkError: no jmvfw in java.library.path
at com.sun.media.JMFSecurityManager.loadLibrary(JMFSecurityManager.java:206)
at com.sun.media.protocol.vfw.VFWCapture.<clinit>(VFWCapture.java:19)

[SOLVED]:Is it possible to use functions like decode in 'setWhereClause()'?

Hello,
My requirement is that I have 2 poplists - Country and States.
When I select a country,the corresponding states of that country should get populated in the states poplist.
The approach I took is that :
I selected firePartialAction as ActionType in Country poplist. Then I called a function to VOImpl of StatesVO and set the where clause there.
Now I was thinking about using decode as there is no direct connection between the CountryVO and StatesVO.
Is it possible to use functions like decode in 'setWhereClause()'?
For Example:
setWhereClause("DECODE(LOOKUP_TYPE,'XXC_IND_STATES','IND','XXC_US_STATES','US') = :1");
setWhereClauseParam(0,Country);
executeQuery();
When I tried running the page,no error was given but when the country poplist was changed - there is no change in states poplist.
If its not possible to use decode in setWhereClause(), could you please guide me as to how I can write a query to retrieve a value from a table and store it in a variable 'A'- so that I can pass that variable 'A' in setWhereClauseParam function .
Message was edited by:
Anju Susan

That kewl, but for u knowledge u can add anything in ur where clause of query through ur code in Voimpl class. It is even possible to do change entire query, see Voimpl class methods in javadoc.
--Mukul

Is it possible to use an mSata drive as the primary drive?

Greeting everyone,
I recently bought an HP ENVY Phoenix 810 whiich comes with the MS-7826 (Kaili) motherboard which has an mSata slot with a 16gb msata ssd in it, but it's only being used as a cache. So my question is, is it possible to use the mSata drive as as the main bootable drive along with 3 other hard drives? I'm planning to install a 256 msata ssd along with 3 4tb hd, but want to use the msata as the main one. Is it possible, if so how?
I've come across a few forums where they were having problems with the same thing where they were able to use it as the main drive but as soon as they installed the original bootable drive they system will not boot since the drive didn't have an operating system installed in it and it wont boot from the mSata even though the os was installed onto the mSata. Any ideas?
Thanks in advance.

JCCR510, welcome to the forum.
The mSATA drive in the computer can only be used as cache and not as a boot drive. This is the way that HP has it setup.
You certainly can buy a SATA SSD and install it. As you can see in my signature below, I have Samsung EVO 840 SSD in my 810-135qe. It works great.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Using exchange2003 on iPad and iPhone. Is it possible to use agenda on iMac via the cloud?

I am using exchange2003 on iPad and iPhone. Is it possible to use same agenda and contacts on iMac 10.7.2?

Hi jeris529,
As Niel has suggested, you should not use a non standard disk in your slot loading iMac.
Further information about disk compatibility or usage can be found in the Apple Knowledge Base Article "Using nonstandard discs in optical drives".
hope that helps some,
littleshoulders

Is it possible to use one imac to control the screen of another?

Hi,
I'm thinking of buying a new iMac. At present I have an older intel iMac (1.83, 17 inch, 2 Gigs ram, 250 hd) and I work mainly with Logic Pro 8. Logic Pro 8 has a node function which allows you to use the processing power of a second computer to enhance the processing power of the primary computer. My present iMac in my new setup would be the node computer to the new iMac. I already know I can use the processing power of my present computer but can I also use it's display? In other words can I use the new iMac to control the old iMac's screen? Thanks

One thing I'd caution you on, Logic node uses resources over an ethernet connection, which this screen sharing application also appears to be transmitted over. Using this screen sharing app, the internet, or any other networking application on the Logic Node computer will affect the amount of bandwidth available to Logic Node, reducing the amount of performance you get by having the second "node" computer hooked up.
It's possible that it may not be very noticeable, but I'd definitely do a test with and without the screen sharing app to see how far you can push it.
I'm curious to see if this works well, I wouldn't mind using my PC laptop for a second monitor.

Is it possible to use SCCP and SIP at the same time?

Our CCM is using v9.1 and all of our phones are SCCP. We are looking at a conference room phone that runs SIP. Would it be possible to use this in our current setup?

Hi @bobdchambers,
That's totally fine. They both co-exist in the same environment but make sure to not configure the same extension in different models because if you dial an extension that is configured in a SCCP phone and a SIP phone, just the SCCP phone rings.
HTH.
Rgrds,
Martin, IT Specialist

Is it possible to use cursors and zooming in the plotxy function that outputs pictures?

I use the plot multi xy function in my vi that outputs a picture. And I wonder if it is possible to use cursors and zooming with this output picture?
Thanks,
Ogulcan Kaya

Hi Ogulcan,
it is, but not as straightforward as with standard graphs.
As a starting point take a look at the example shipped with LV: Modified Smith Plot with Zooming.vi; you find it in picture examples.
Good luck,
Alberto

Is it possible to use SCOM 2012 R2 with the new Azure Managment Pack to monitor Aure Wadlog Events for azure sdk 2.5

My operations team has been using MOM 2007 and has recently migrated to SCOM 2012 R2.
Till now we are using Monitoring Pack management packs which were released way earlier (https://www.microsoft.com/en-us/download/details.aspx?id=11324),
and had a dependency on diagonstics connection string being present in the cscfg of Azure package.
This pack was allowing us to monitor the wad logs and events generated by applications.
However we plan to move to newer Azure managemen pack (http://www.microsoft.com/en-us/download/details.aspx?id=38414), which allows for discoverability.
I have 2 questions -
Is it possible to monitor Diagonstics Event Log with the new Monitoring Pack released on 10/2014 ? Or will the users still require the earlier pack for monitoring diagnostics installed in parallel ?
Azure SDK 2.5 got rid of diagonstics connection string. Is there any possible way to Monitor of Azure Diagonstics wadlogs using SCOM 2012 R2
Thanks,
Pratush

Hi Pratush,
I would like to suggest you go through the management pack guide to get details. And you should be able to create custom monitor to monitor event logs for Azure.
Hope the below links be helpful for you regarding to monitoring Azure:
How to monitor your Windows Azure application with System Center 2012 (Part 2)
http://blogs.technet.com/b/dcaro/archive/2012/05/03/how-to-monitor-your-windows-azure-application-with-system-center-2012-part-2.aspx
Windows Azure and SCOM 2012
https://social.msdn.microsoft.com/Forums/azure/en-US/ecb409e2-8595-40e8-9a73-757b670b06db/windows-azure-and-scom-2012?forum=windowsazuremanagement
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

[SOLVED] is it possible to use Super by itself as the prefix key?

Similar Messages

Maybe you are looking for